Tips for clones of Win 7

Similar Questions

• New tip for iPencil

  Is it possible to buy a new tip for iPencil?

  So far, they are not listed anywhere in the Apple Store. Call the AppleCare and see what they can do for you.

• How to install Skydrive Windows application for 32 bit Win XP?

  How to install Skydrive Windows application for 32 bit Win XP?

  You do not have.  Like the Skydrive page will tell you, that Windows XP is not supported by the software.

• KB2655992 and KB2698365 updates are for Vista and Win 7. Why my automatic update XP machine say I need them, then can not install them?

  Auto update on my Windows XP (SP3) checks every day, then trying to download and install the updates above that are for Vista and Win 7 systems. If I try to download and install manually, the XP machine has no idea about mail file ".msu" on these updates. My PC tried to install these on a daily basis since July 11, 2012.

  Thank you

  Hello

  Using Windows XP 32-bit or Windows XP 64-bit?

  KB2655992 and KB2698365 are also updated in security for Windows XP. I suggest to perform the clean boot, download and install the updates from the Download Center.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Update security for Windows XP x 64 Edition (KB2655992)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30220

  Update security for Windows XP (KB2698365)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30228

  Note: Make sure that you reset the computer back to normal once the diagnosis is complete.

• How can I run WP51 for DOS with Win 7?

  How to make qp51 for DOS with Win 7? This is a 16-bit program and will not work with the Simulator XP, which comes down to 32. I have DOSBox, but am stuck on getting wp51 to run.

  16-bit applications are not supported in Windows Vista or Windows 7, please see the following article.

  Article number: 926657 - some 16-bit DOS programs and the command prompt does not work in mode full screen in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/926657
  
  If DosBox or Virtualbox is not running, then you may be out of luck.
   
  Sincerely,

• Tips for Lightroom 6 help indicates again that if "using a graphics card AMD/ATI under Windows 64-bit with the AMD Catalyst driver 15.7 and Lightroom CC/Lightroom 6 hangs or crashes during launch or when you edit an image in the develop module.»  This

  Oops... .the everything in the title... My apologies!

  Tips for Lightroom 6 help indicates again that if "using a graphics card AMD/ATI under Windows 64-bit with the AMD Catalyst driver 15.7 and Lightroom CC/Lightroom 6 hangs or crashes during launch or when you edit an image in the develop module.»  This problem may occur when you use AMD Radeon HD 5xxx card graphics series 8xxx running versions of pilot 14.501.1003, 14.502.1014 and 15.200.1062.1004. For the Solution of the page install the AMD Catalyst 15.8 Beta Driver for Windows (posted August 31, 2015).  However, there are now a 16.1 driver... would this work with Lightroom 6buttons Photpshop CC without problem or should I stay with 15.8 beta for Windows driver (Windows 8.1.

  Thank you very much

  Paul Winstone

  Hi Paul,.

  This article was created when users have faced problem with old drivers for AMD graphics card.

  Yes, you can upgrade to the last 16.1 pilots and who should work well however, you should have 1 GB VRAM or more to take advantage of the GPU processors.

  Kind regards

  Claes

• I received a request for donation through TechSoup. When I go to the list of products I don't find an option for Acrobat Pro Win ESD XI. I tried to download Adobe Acrobat Pro 11.0 instead, but when the dowloand begins and the files are being extracted I a

  I received a request for donation through TechSoup. When I go to the list of products I don't find an option for Acrobat Pro Win ESD XI. I tried to download Adobe Acrobat Pro 11.0 instead, but when the dowloand starts and files are being extracted I'm then alerted my "device already has a more functional product installed. The installation program will end now. "I had already downloaded a free trial of Acrobat Pro DC. When the trial ended, I tried to activate my new purchase of product with the serial number gave me of TechSoup... no luck. Help, please

  Please uninsatll Acrobat DC version.

  You can install Acrobat XI pro from the link below:

  Download Adobe Acrobat products. Standard, Pro | DC, XI, X

  I hope this helps.

  Concerning

  Megha Rawat

• Y at - it a tip for Undo and Redo to work?

  I tried all possible ways to use two fingers to swipe back, but I can't get the cancellation or reinstatement for work on my iPad mini. Does anyone have any tips for this?

  The gesture is not easy to use and it is only available for cutting and selection in the content-aware fill then we actually disabled in our 1.0.1 update. We are the reworking in our next release.

  If you really want to try, keep your two fingers on the screen and quickly swipe left or right. Keep your fingers too long will turn the pan gesture. I hope this helps.

• Some useful tips for photoshop touch?

  Anyone have tips for Adobe Photoshop Touch, it's new to me and I'm not 100% with him immediately

  Thanks for the reply on my forum

  Build-in tutorials should be a good starting point for you.

  In addition, you can watch some video tutorials... http://TV.Adobe.com/search/?q=Photoshop+touch&SortBy=relevancy

  If you have any questions, this forum is the place to ask. We already have a lot of good information here. For more information, that you don't see here, there is a community of people who can help you

  Hope that helps.

  -Guido

• Card video tips for CS6 (Win)

  I am currently using Premiere Elements, but I'm looking to buy the Suite CS6 with Premiere Pro. While I mainly SD editing, my son wants to enter in AVCHD editing and especially using legacy.

  Because I currently have a homemade PC (plug at the end of the post) with only integrated graphics Intel HD2000, I guess

  
  

  • Question No. 1 is w bad I really need a dedicated video card or is the HD2000 enough for what I want to do? Of course faster = better, but how much faster than it will be for my money, that is to say for the money.
  • And Question 2 would be... If so, which card? I really want to spend more than I need, but I don't want to go cheap and end up with a solution that is not much better than what I.

  
  

  I'm especially confused with Mercury Playback, AfterEffects, SpeedGrade, and what is really necessary. In looking at this page, they are really pushing Quadro GPUS and Quadro SDI Output cards. But on the page 'officially supported', it lists the GTX GeForce, Quadro and Quadro FX cards.

  What the devil? Can someone help me to wade into this soup to the alphabet of the cards, and what supports it that?

  Let's say that I went with the GTX 570... is 1 GB enough ($300 for the EVGA version) or 2 GB ($340) can I? The 570 would be good enough?

  Or I have to go to the GTX 580? $430 for the 1.5 GB and $480 for the 3GB, it is considerably more money that the GTX570 then it better be significantly better than the GTX570.

  Or there is the the Quadro 2000 or 2000 d for about $400. It seems to be between 570 and 580 price wise, but it is a different line. Also, cards seems to only be done by PNY... what's up with that?

  I can look at technical and marketing hype until I'm blue in the face, but it is not help me decide what I really need - and how well I can go

  TIA!

  System specs

  ---------------------------------------------------------------

  Win7 Home Premium 64-bit

  Intel i7-2600 (not overclocked, stock cooler)

  Card mother Intel DZ68BC

  16GB G.Skill Ripjaws DDR3 1333

  SeaSonic 620W power supply

  WD Caviar Blue SATA III 500 GB (programs)

  WD Caviar Blue SATA III 500 GB (data files)

  WD Caviar Black SATA III 1 TB (videos)

  Antec 1200 case w / 6 fans

  Models that you listed, I would go for the 2 GB 570 myself.  A 570 will give you great performance, and the extra 1 GB of memory for $40 seems worth it.

• Clone of Win and Time Capsule

  Hello.

  I am currently on a MBPro, with El Capitan, Bootcamp and Windows 10.  I have a Time Capsule for wireless backup.

  Will it partition and format the time Cap. While Win Clone can use it for backups?  Or can I just format the whole TC in a format usable by OS X and Windows 10?

  Thank you

  BKB

  You don't have to and can not change the format of the time Capsule; Since this is a network drive, it'll be available on all computers on the network regardless of OS file system support.

  (138940)

• Recommendations/tips for a beginner contributor?

  Hey all!

  I started to contribute to communities of support today, but the interface may seem a little tricky to work with sometimes. I was hoping that some useful people would be willing to share tips/advice for someone new in the region!

  Currently, I am just by clicking on the 'Content' link and refreshing for the new questions to answer, although sometimes sorted by "involved" to follow up on the questions answered. Really hoping to find some easier ways to use to check on different communities or focus on specializations.

  Thanks in advance!

  Take a look at this plan of the Site communities and categories.

  TT2

• Need instructions/tips for no Win8.1 on mid 2012 MBP pro audio problem

  Thank you for taking your time looking in my question.

  My Machine: Macbook Pro retina no Mid 2012

  What I wanted: install win 8.1 pro 64 bit on a second SSD completely (without Partition) / replace the optical drive

  My problem: everything works fine, but no sound. Drivers seem to be the cause:

  
  How I installed windows:

  1. I put the own ssd in the main Bay + optical drive with disk 8.1 win

  2. Windows disk initialized and installed windows 8.1 64-bit without errors

  3 install the drivers for bootcamp support

  4 returned the Mac ssd go back to the main Bay and put the ssd of windows in the caddy and then in the optical Bay

  5. starting is by holding alt and choosing between mac os, recovery and boot efi (which contains windows)

  What I tried (all of the following are ineffective):

  1 reinstall/repair drivers bootcamp support from different sources (of the download on the website of apple and the bootcamp assistant application)

  2 reinstall the realtek drivers

  3. how to install intel drivers graphics hd 4000 (found a source who said it would do the trick, there is no)

  4 uninstallation of controller high definition Audio (it always seems to come back)

  5. manually download and install the drivers http://www.stuffedcow.net/files/CS4207_WinVista_Win7_32-64-bit_6-6001-1-30.zip cirrus

  I get the following error:

  

  6. place the ssd of windows in the main Bay

  7 troubleshooting sound (a 99% sure that this would not work)

  8 throw up my hands in despair and uncontrollable crying afterwards (was probably the most effective on 8)

  That I need clarification on:

  I found found some sources say that installing windows via EFI mode causes no sound, but I'm not sure if the way I installed it is considered to be the efi mode as I have never had an option for efi mode. However when I start upward and hold option the name of the windows disk named ' BOOT EFI. Efi mode is how I installed windows?

  What I need instructions on:

  Some sources claim that I need to install windows in hybrid MBR mode however I do not know how I would install windows any differently than the way I did above. How can I go about installing, not in start efi mode, if I want to spend the whole ssd for windows / that I would do anything differently than the steps I listed up there?

  Thanks a lot again for your time and help!

  Windows must be in the main Bay and must stay in the main Bay after installation. You can either use the wizard of BC and create a USB installer which will also create a legacy BIOS/MBR W8.1 (default value for your specific model) or if you choose to do it manually, make sure that the icon of Windows from the installation media, not EFI Boot.

  If you start from the DVD W8.1, the default value is Boot EFI. BC Assistant did a bit of work for you, in order to avoid the is not a good idea.

• Tips for when your webcam is not detected

  EDIT: If you have recently upgraded to Windows 8 and experience this problem, please read this document.
  
  Here are some tips to solve a problem of webcam not detected.  I see this question get asked a lot so here are the steps you should take to resolve the problem.
  
  To start, you make sure that the device is detected by Windows.  The following instructions are for Windows 7, but should be very similar to Windows Vista and Windows 8.
  
  Option 1: Check Device Manager to make sure that it works correctly.

  1. Right-click the Start button, type "Device Manager" and press ENTER.
  2. Once charges Device Manager click 'View' then "Show Hidden devices."
  3. Locate the section "imaging devices".
  4. Note If you see the webcam here.
  5. If the webcam is listed, click it and check that it is not 'disabled '.
  6. If the webcam is listed and disabled, go to Option 2.  If the webcam is not listed, you will spend on Option 4.

  Option 2: Allow Windows to re - install the device.

  1. All remaining in the Device Manager, right click on your webcam and select "Uninstall".
  2. If you are prompted select "remove driver and driver package".
  3. Restart your laptop and allows Windows to attempt to reinstall the webcam.
  4. If Windows detects the webcam check the operation of the webcam.
  5. If Windows does not detect the webcam and install move to Option 3.

  Option 3: Manually install the drivers for your webcam.

  1. This site allows to determine your product/model number.
  2. Visit the Page of Support HP and use this product number to visit the specific page of your product.
  3. Go to "Drivers and software" and are looking for the driver for your webcam.  NOTE: the drivers for the webcam are sometimes provided with the YouCam software.
  4. Download and install this driver.
  5. Restart the PC.
  6. Check the features.

  Option 4: Manually re - detect the hardware.

  1. Disconnect all external devices.
  2. Shut down the laptop.
  3. Remove the battery and AC power.
  4. Press and hold the power button for 10-15 seconds.
  5. Reinstall the battery and AC power.  Then turn on the laptop.
  6. Once Windows is loaded back to the Device Manager.
  7. Selection 'Action' and then 'search for material changes.
  8. If the Device Manager detects hardware let settle.
  9. If Device Manager does not detect the see material Option 5.

  Option 5: System Restore and system recovery.

  It is very well described in this document.  Note that all data not saved prior to a recovery will be lost.

  6 options: Repair or replacement.
  
  If none of these solutions worked for you, it is likely that you are experiencing a hardware failure.  It is possible to replace the webcam or reinstall a loose ribbon cable.  However, it is one of most difficult repairs on the laptop.  If you want to try this repair, you can visit your laptop support page and go to the section "manuals".  There is normally a "maintenance and Service Guide" for laptops, this will cover the disassembly of the laptop.  You can then use HP parts Surfer to locate the part for your laptop.

  If you do not want to attempt a repair yourself you can ask HP about a repair.  For customers in the United States / Canada, you can call 1-800-474-6836.  If you are not in this region, you need visit the HP Support Site to get contact information for your region.

  I hope that everyone considers this information useful!

• No need for Modules common Win XP for Satellite A205-SP4068

  Hello

  I have a TOSHIBA * A205-model No. SP4068 * PSAF0U-08X01X * and I need the "commom modules" for Win XP PRO SP3. -.

  where can I download it?

  Thank you and best regards,

  Gort

  This model of laptop US?