Title text below video clip?

Similar Questions

• Adobe Media Encoder is not looking for additional audio top titles when the video clips to transcoding.

  I have 4 K images with 4 mono audio tracks recorded.  Two of the tracks are dead audio, both are mic on the camera.  I need this audio, synchronize externally recorded in PluralEyes tracks, but that is besides the point.

  When I use SOUL 6.0.2.81 (part of the CS6) to transcode my 4K MOV files in images of 1080 can be used for offline editing, it seems that pick up the first two tracks (dead) and ignore the titles 3 and 4, which contain audio live.

  So far the only solution I found is to put each clip in the first separately.  First recognizes all 4 tracks.  I remove the first two, then export to first to 1080.  It's waaay to strong workforce given the number of shots.

  Any ideas why SOUL would not pick up the two audio tracks?

  Under settings QuickTime Audio, you can try the 'Uncompressed' codec that is multi-channel options?  Then, please use option 'Channel 4 '.  This should export all the four channels.

• Title not listed is not in the video clip

  Hello

  I'm having a problem with the titles in my video clips.  I am working on a project and had no problem creating a title and placing it under the second clip in my sequence.  However, I can't can't get a title to display on the other elements in the sequence.  I tried to restart the project, creating a new title, dragging the first title (which works) under this clip (and even clips is close), but nothing seems to work.

  Now, I noticed in the workspace title, I see the title on the nearby video of the starting and at the end of the title, but not between these two points.

  I've attached screenshots and would enjoy solve this one.

  Try to put it on a higher track, the video above.

• Windows Movie Maker-color of the video clip is improved when you add a title to the clip

  Adding titles with Windows Movie Maker

  With Windows Movie Maker when I add a title to a clip to the color of the entire element is significantly improved, not only the text. How to prevent this?

  Hi nambiti,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer

  You can try to change the color of the title element and check if it works.

  (a) open Windows movie maker

  (b) click on Toolsand then click on the titles and quotes.

  (c) click on the link that corresponds to where you want to add the title or credit.

  (d) in the entry for the title text box, type the text that you want to appear in the title or credit.

  After you type the text, the monitor displays the default animation and the format for the title or credit that you want to add.

  (e) to change the font and the color of your title, click change the font of the text and the color, and then choose the font, font color, put in shape, background color, transparency, font size, and position of the title to your liking.

  (f) click on the title to add.

  Add to the credits and titles of movie in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/Add-movie-titles-and-credits-in-Windows-Movie-Maker

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to make video clips stick as a text followed by 3d camera?

  Hi, is it possible to give a video clip of the camera crawler 3d text effect? the clip will remain anchored in one place and no movement while the camera moves? Thank you!

  If I understand you correctly, that is exactly what made the AE camertracker. Follow you your shot, create a camera and a solid, then simply use the replacement process to substitute your video clip for solid.

• A particular website comes in the form of text only, no graphics, after I attepted to change a setting while streaming a video clip. IExplore shows the site properly.

  Windows XP. Firefox 3.6.12. Java extensions console, AVG safe search, ADblocker plus, Deputy MS net framework.
  Was watching a video clip on PBS. Full screen. The video menu wouldn't go away. I have a click with the right button on the video screen, changed a setting, in that I think has a filter setting and now I can't get into PBS.org. Iexplore works very well. Uninstall (save all settings) and reinstalling firefox did not work.

  Sounds that you have blocked some content in Adblock Plus. You must click on the ABP icon and check what is blocked on this page.

• How to put a heading for a group of controls without line below the title text?

  Hello

  Is it possible to write a heading for a group of controls and indicators made by "chiseled online", such as the chiseled line remain invisible under the title text and remain visible everywhere else? For example, the titles 'Printer', 'Range', 'Copies' and 'Zoom' in a Microsoft Word form in the PDF file attached. Note that there is no line under the title text and there is no text box surrounding the text of the title. I want to have that kind of title for the Group of controls and indicators in a GUI of my LabVIEW application.

  Any help will be appreciated.

  Thank you.

  Javed

  Any label you use as long as you COLOR IT CORECTLY. Use the background with transparent border color... just set the boxes of color as shown.

  

• How can I draw a line around the edge of a piece of property that I shot a video clip of 13 elements?

  How can I draw a line around the edge of a piece of real estate in a video clip with 13 elements?

  KING OF THE SKY

  First 13 items on what operating system? Have you updated 13 to 13.1 still using Help Menu/updates to date of an open project?

  Your question immediately... you could try something like this

  In this scenario, you start with your video on video 1 track with the Timeline indicator placed in the appropriate location of content timeline.

  The Titler line file created will be automatically placed at the position of the indicator in the timeline.

  Text Menu/New/default of titration / and select the Section forms.

  The Titler file goes to Video Track 2 above the video on the video 1 track.

  Select the line tool in the section shapes and draw your line on screen correspond to the where you want it to appear in the video below.

  Your image of the line is the line on transparent background where the content below shows through the transparent areas in this image of the line.

  Please consider. If any questions or need any clarification on the above, do not hesitate to ask.

  Thank you.

  RTA

• Get only audio in Windows Media Player 11, when opening an AVI video clip

  Someone sent me a video clip titled AVI.  When I try to open it with Windows Media Player all I get is audio. I also tried to try to open it with Quicktime and nothing happened.  Any ideas?

  The following free utility to identify the codec you
  to read the file.

  Download GSpot
  http://www.free-codecs.com/download/GSpot.htm
  (left-click the text: "Download GSpot")
  (on the next screen...
  left click: 'Download [GSpot 2.70]')

  You don't have to install it... just unzip the file and
  GSpot.exe left click to launch.

  GSpot Codec identifier
  http://www.headbands.com/GSpot/download.html

  GSpot Super quick start
  http://www.headbands.com/GSpot/v26x/Quick_Start.html

  Or you can download and install the freeware VLC
  Media Player that will play anything.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

• Video clip locked to start of timeline - how to get around?

  Expertise: beginner.

  I have the Tracking Setup

  Group 3 - text video

  Group 2 - static images video

  Group 1 - video clips video

  Audio track

  The first video clip is "broken" at 00:00. If I try to move it just it snaps back to 00:00. Other clips can be moved but if I drag to the right it moves above the following.

  Q1: in general, how to open a gap between two elements (for example, to insert a title)?

  Q2: in particular, how can I move the first clip (and all subsequent clips) to the right?

  Thank you very much.

  You should be able to select the first item, hold down SHIFT, and then select the end element. Now click and drag.

• Discoloration video, but not out in the video clip.

  Hello.

  I need to run a video that I can turn over any other flash content.

  Since I also have to add sub titles, I decided to import the video clip into a clip. The clip now has as many frames as the video.

  I added subtitles to keyframing a line of text in the video and synchronized it upward with the film. (it was not really easy...)

  I placed an instance of the clip on my main stage in frame 10. I added an on and and STOP simply would take you to a framework later without the movie clip instance and return to frame 10 once again if you want to see the video again. It worked well.

  To book the elegant transistions I wanted to fade video in and out. So on the main stage in the frame of 10 I placed this action script:

  (+ gave my movieclip the instance name mc)

  Stop();

  Import mx.transitions.Tween;

  Import mx.transitions.easing. *;

  var myTween:Tween = new Tween (mc, "_alpha", Strong.easeIn, 0, 100, 2, true);

  well which mitigates the video when the playback head to frame 10.

  There is another part of the script that should be able to tell the end next to the clip and it melted:

  myTween.onMotionFinished = function () {}

  new Tween (mc, "_alpha", Strong.easeOut, 0, 100, 2, true);

  }

  This however, I can't work:

  (1) if I place this code in the frame of 10, the video goes first but immideately faints again.

  (2) I tried to put 15 images of code at the end of the clip, and that did not work.

  (3) I tried to put 15 images of code at the end of the clip and add _parent.  and who does not.

  It is possible to work and if so, how?

  If this isn't the case, please let me know if you have any other approach proven to suggest.

  ggaarde

  If the first interpolation works in the timeline panel, and then in the same timeline in frame of whattever close to the end you just create another interpolation there.

  myTween = new Tween (mc, "_alpha", Strong.easeOut, 0, 100, 2, true);

• Difficulties and video clips

  It's really irking me.

  I am extremely new to Flash so please bear with me. I guess that it is a simple, easy to fix problem I'm having. I have Adobe Flash Professional CS5.5.

  What I'm trying to do is a sequence of images after other video clips will stop display.

  The sequence of images does what it is supposed to and working properly, and the other clips are also successful. However, whenever I try to put the clips of film for images in frames or keyframes, start video clips will only play part of the path before the images appear. This happens even if the clips of images are on images/keyframes (I tried both) after the other movie clips.

  The clips that are supposed to play first are each on a separate layer and there are two of them.

  The first layer is called 'tree' and the second is called "text".

  The tree stratum is an animated gif image 45 that I shot in a clip. I created a motion tween and changed his alpha for the gif has a fading in and out effect. I also so that he stops to play again once it reaches the last frame. I am not using stop(); for this.

  The text layer has an animated gif image 40 I also turned into a gif. This gif is also a clip and also the motion tween. His alpha was also changed.

  Trees and text play together successfully, and how I want that they.

  The sequence of images is three separate images, each a different layer, which fade into eachother. These images are PNG, so they are not gifs or they have their own frames.

  The lower layer is called level 1 and executives 1 to 50 of adjustments of interpolation and motion alpha fading the png image. The image is a clip.

  The layer on top is called floor2 and has different 51-100 of a png image fade-in frames.

  The layer is called floor3 and a frames 101-150 d'enieme png fading.

  The images are successful doing what they are supposed to.

  Text and tree layers are a fla file and floor3, floor2 and layers level 1 a fla file.

  When I copy the images of level 1, floor2 and floor3 layers in a keyframe after the text layer and trees, they yield correctly, but when I test the movie, the sequence of images appears much earlier than it's supposed to, interrupting the video clips on the text of layers and the tree. I tried to move keyframes of the ground # layers farther down the timeline, but then the other clips of movie just stop.

  In the fla file with text layers and FIR, I have imported gifs in the library and then put them on the stage.

  In the FLA with layers of ground #, I imported the pngs in the scene.

  Here's what look like text layers and the tree:

  

  The layers of soil look like: #

  

  The rest of the frames the floor #s...

  

  So, I thought that the problem was that I had to delay the image when. I looked around and found no code or anything for that...

  Later, I thought it was because I had imported the tree and text gifs to the library before putting them on the scene.

  I open a new fla and imported gif 'tree' directly to the scene.

  I thought it should work because then he would show each individual image in the video clips, which is not in the photos above. By importing the gif like this, it shows the individual images. I tested with the sequence of images and it works fine. But I have a problem with this method too...

  I select all the frames for the gif convert to symbol, so I can add a motion tween and mess with the alpha. However, only the last picture is converted to a clip. Well actually no... Only circled below executives turned in the clip. Even when all frames are selected.  Is not very useful because then I can not change the alpha for the entire gif or I can create a motion tween without getting a message saying that the motion tween could not be applied to all managers.

  Looks like this version of 'the tree '.

  

  And executives so then continue up to 135.

  Executives who are light in the video are below.

  

  If I can solve the problem I'm having with the tree displayed in the two images above this sentence, then I can view video clips and image sequence without problem. It is not quite how I intended it to be, but she would be successful and would continue to operate.

  If I can fix the problem with the sequence of images showing early up to tree and clips of text is cut, then this project would be as successful and it would be how I wanted it to be.

  If you need more information, let me know and I'll explain something better.

  I am not prepared to provide a download link in this forum for my fla files, but I can send to you if you want to look. I don't want someone to be able to find them and take them by doing a google search.

  I downloaded two sovereign wealth funds however.

  The first is the tree and text layers/clips work as they are supposed to. The second is to do what it is supposed to be the sequence of images (level 1, floor2, floor3).

  Text and tree: http://glassoliverdesigns.weebly.com/uploads/1/0/6/5/10653451/tfg1.swf

  Level 1, floor2, floor3: http://glassoliverdesigns.weebly.com/uploads/1/0/6/5/10653451/tfg2.swf

  Notice how Flash swf, when the text stops the thing in the background at the end of the text and trees. If who can Flash WHILE the images appear, then that would be great.

  TL; DR: I want the # flash ground appears after the text and tree flash, but I continue problems and nothing I try is not working properly.

  Very concise question, enjoy the screenshots. Keyframes, one thing that the motion tweens do not always show very well. I would like to clear up a few things and see if it helps.

  Return to what you wanted to do originally, which is to copy the images from one document to the other. That's perfectly fine and to clear up, it will also copy library items (images, clips, etc.) that are required to copy these images for you, you don't need to import them yourself.

  To copy images (no symbols) successfully, select the first frame of the frames that you want to copy, hold down SHIFT and select the last frame (or even double clicking anywhere in the blue motion tween should select all as well). Now do a right click and "copy managers." Now, go to your new document, select an image, right click and select Paste images. You will see the same copied frames, blue representing the keyframes and tween came with it, and finally you'll notice all your images/etc have been copied to your library.

  Now is the right time to manage the background image library that was just copied, if you're a freak like me cleaning.

  This process is the same whether you have tried, for other documents that you want to copy to. If all resources correspond to the name then Flash will ask you if you want to "crush" this library item. If you do that, you altérerez one of your previous animations. Make sure that this is not the case.

  The witch hunt common here is not knowing how to slide frames properly. If the replacement is not the problem, it's what I suspect is your problem and you expand / reduce the timeline keyframes do not go with you.

  For example if I import 2 clips with fade in/out and move the keyframes that you did, I'll have something like this:

  

  Now, by moving more I would be very careful to select all the images I want to pass through the above methods. Click on the first picture, hold down SHIFT and select the last image or double-click anywhere in the middle of the blue. The selection of executives:

  

  Now, I just slide my images selected in the view of law, keyframes remain as it should (black dots):

  

  Playback of the animation as expected.

  Finally I don't know if you've used the Panel, but you really should get used to the query editor. This gives you control over the relaxation as well as shows you a view on key images that exist in a motion tween is selected.

  Initially, this Panel may seem complex, but it simply represents the basic properties that you can animate. All the more you animate properties can be added here. I moved the X, Y and Alpha properties of my object. So you can see what I was doing on the periods of 30 to 60. You can also adjust basic relaxation here.

  

  If your animation look not correct, you can select a motion tween, open the query editor and check the keyframes appear correct. Scrub the timeline and look at the values you are interested in. For example, Alpha for you.

  If you do not see the keyframes when you scrub the timeline, you moved your bad frames and keyframes exist probably in a different place, and therefore it seems incorrect.

• Video clips on slides of presentation

  Hello. I am putting together a flash (pro8) presentation. I have a few slides a video clip. They video clips start to play as soon as you open the published swf file. Is it possible that the videos do not play as soon as you open the swf file? I want the person to look at a presentation click on the play button when they get to the slide with the video, but I can't understand it. Is it still possible?

  Hi mydoofy,

  A good friend (Dan Carr) helped me a while back about this, and I have provided below what you are supposed to do to fix your problem.

  Playback of the video immediately because of the way in which the load screens in
  the Flash animation. In reality, the screens are only a battery of movieclip symbols that
  all load on frame one (at the same time). The video component is called to play
  by default, as he plays during the loading of the movie. To turn off power, try these
  steps to follow:

  1. Select the video component on the screen that contains the video.
  2. in the property inspector Panel, enter a name for the instance in the
  upper left corner of the Panel. The component 'view' of the name.
  3. with the component still selected, click the settings tab in the
  The property inspector and the setting autoPlay to false.
  4. click on the video screen in the outline of the screen Panel. Open Actions
  panle (F9) and enter the following code:

  -The code placed on the screen
  {We (Reveal)}
  Display.Seek (0);
  Display.Play ();
  }
  {We (Hide)}
  Display.Stop ();
  }
  //------------

  So what is happening here is that we say the component does not automatically
  play the video. Instead, when the screen turns play us the video. When
  It is hidden stop us the video.
  Text

• Helps editing of video clips in imovie

  Have an imported video but trying to edit and cut the clips that I am only able to select the full video to put down in my film, not just the clip I want to choose.  Helps editing of video clips in imovie

  < re-titled by host >

  have an imported video but trying to edit and cut the clips that I am only able to select the full video to put down in my film, not just the clip I want to choose.

  This is a new and improved feature in iMovie. You must hold down the 'R' key while clicking on the part of the item you want.  By default, the full clip will be added to the time line.

  See notes to iMovie version 10.1.2:

  

• Problems related to the film project title/text boxes.

  In the opening of my external hard drive iMovie projects, many title/text boxes throughout the film are whitewashed.  When I click it, the text appears, but when playing the movie, they come again white.  I had installed iMovie v.10, could not navigate, so returned to old iMovie 9.0.7 and reused, but found this problem with movies.

  iMovie 11 (version 9.x.x) is not compatible with El Capitan and results in errors that you see more than others. iMovie 10 also reported problems with the video in the event viewer and the chronology of white. Only iMovie 10.1.1 is fully compatible with El Capitan. I would upgrade to 10.1.1. Yes, it's a different interface, but not for difficult cases, you read up on it and watch a few tutorials.