TM2T-1000: winload.exe

Similar Questions

• Winload.exe missing or damaged application

  Windows opens with the boot manager asks me to insert the windows installation disc reads the Message on the page windows file: \windows\system32\winload.exe status: 0xc000000e Info: the selected entry could not be loaded because the application is missing or corrupt

  PS: do not have a Setup disk

  > Ps: don't have a Setup disk

  That's not good.
  I think that the system or recovery disk is your last resort.
  If your laptop belongs to the European series of Toshiba you can order this disc here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Windows could not start. Winload.exe corrupted

  Been having some problems with my Equius has therefore decide to start, F8 and do a system restore toshiba.

  Started and started to format the drive. All of a sudden he projected blue.

  The problem is now I can not even start until now to get the recovery/restore option. I get: -.

  Windows could not start. A recent hardware or software change might be the
  cause...

  File: \Windows\system32\winload.exe
  Status: 0xc000000f
  Info: The selected entry could not be loaded because the application is
  missing or damaged.

  Not sure how it all works, but I guess that recovery stuff are stored on a separate partition. Problem is I guess you must be able to start to load windows before you even get to do this?

  I downloaded and tried a boot with no joy, and of course vista recovery disk, toshiba provide a vista disk. How the hell can I recover from this situation?

  Hello!

  If you are not able to get in the boot menu for HARD drive recovery, you must use a Microsoft Vista disc to reinstall the OS.
  Or you use the Toshiba recovery disc but I think you forgot to burn the disk because normally you get a message (recovery point) you want to burn the disc.

  However, you can order a Toshiba Toshiba recovery disc directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Re: Satellite A300D: winload.exe missing or damaged

  Hello

  I tried to make my system recovery using F8 and his works, but all of a sudden the battry during the operation failure.
  So I repated steps again after I connect the charger but I couldn't, and I got the message...

  + Windows cannot start. A recent hardware or software change might be the +.
  + talk +.
  + File: \Windows\system32\winload.exe+
  Status: 0xc000000f +.
  + Info: The selected entry could not be loaded because the application is +.
  + missing or damaged. +

  And I have no recovery DVDs to ther restore dvd,
  I need help to solve this problem, if there is an idea?

  My computer laptop satellite toshiba A300D

  Hello

  You mean that you are not able to recover the laptop using the HDD recovery procedure?
  You can begin the HARD drive by pressing F8, choose fix my computer.
  Then a new window should appear and you could choose a new option called Toshiba HDD recovery.

  If this is not possible then I think that you don't have a choice but to reinstall the OS using a Setup (Microsoft or Toshiba) disk.
  If you don t have this disc then you order on this website:
  https://backupmedia.Toshiba.EU/landing.aspx

  See you soon

• help \Windows\system32\winload.exe file is missing or damaged

  Windows does not start, the computer will not load or meet recovery disk, HOW or WHAT DO I NEED TO DO TO FIX PROBLEM

  \Windows\system32\winload.exe SAY FILE IS MISSING OR DAMAGED.

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  Method 1:

  I suggest you to follow the links and check out them.

  Startup Repair

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Method 2:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

• After the installation of Windows Vista, I get this error: winload.exe tries to load a 64-bit application, but this processor is not compatible with the 64-bit mode.

  I recently installed Windows Vista on my Dell Inspiron 6000. This installation is completed successfully, but when I tried to start, I got an error message:

  Winload.exe

  Attempt to load a 64-bit application, however this CPU is not compatible with the 64-bit mode.

  I've been clean installation Windows Vista Home Premium. I already had Windows XP Media Center 2004. What should I do?

  Thank you

  Ryan

  Hello

  Do a clean install of XP with the XP disk provided by Dell, if you.

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  If you do not have your XP disk, you can contact Dell and ask them to send you a XP disc.

  They should do this for a small fee.

  You need to change the Boot order to make the DVD/CD drive 1st in the order of startup and startup disk:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Vista installation was able to destroy this option of relocation:

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall XP back on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  A Dell must rely on Ctrl + F11 at STARTUP to reinstall XP

  See you soon.

• Winload.exe damaged or missing (0xc0000221)

  Have been running Vista on a T61 Lenovo Think Pad for more than a year and just today (just a week after the expiration of the warranty), windows vista does not completely start.  I get the black screen with the following error:

  Windows could not start. a recent change in hardware or software may be the cause. to resolve this problem:
  (boot from the cd and repair windows) (actually doesn't say that, but that's what he tells you to do)
  File: /windows/system32/winload.exe
  Status: 0xc0000221
  Info: the file is corupt possibaly. the header checksum does not match the checksum calculated.

  I created a boot disk (since the manufacturer did not provide with the laptop) and was able to perform the repair (with no luck) and system restore (with no luck).  I can get in the quick c: through the startup disk and I ran the BIOS screen HARD drive diagnosis and it happened (so far... still underway).

  The manufacturer support told me that I needed to remove or replace my HDD and reinstall Windows which I can't believe would be the solution to this...

  Help, please!

  Thank you.

  Hello bayareapianoman,

  Thank you for visiting the website of Microsoft Windows Vista Community.    You can try one of the options are using the System File Checker tool.  From the command prompt type the following command and press ENTER: sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• PC with Windows Vista does not restart after installing updates, "Windows could not start...". "File:\Windows\system\winload.exe status: Oxcoooooof.

  Last night, I installed Windows updates on my HP Pavilion dv6227cl and now Windows will not boot.  I get the message "cannot start Windows.  A recent hardware or software change might be the cause.  File:\Windows\system\winload.exe status: Oxcoooooof Info: the selected entry could not be loaded because the application is missing or damaged.  I DO NOT have the Windows Setup disc.

  Hello

  I suggest you borrow the CD of windows vista to your friends

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you be able to start your computer in safe mode, I'd say make clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to see link and check.

  Error: Windows could not start. A recent hardware or software change might have caused the problem after installing Windows updates

  http://support.Microsoft.com/kb/2674065

• Presario cq61: winload.exe... status: OxcOOOOOOf

  cannot start windows... windows Startup Manager informs me the \windows\system\32\winload.exe file is missing or corrupted, status: OxcOOOOOOf... I inserted the disk os and changed the first boot on a cd but it will not read it and brings back me to the Boot Manager.

  Hi Alan,

  It would look like the HARD drive failed (the complete test often will accomplish not in this case) and it is compatible with the winload.exe error.

  If you have questions about replacing the drive, or simply the interview Guide & Service, please let me know - include the full model number and your notebook cq61 series Nr - see here for an explanation.

  Kind regards

  DP - K

• How to remove a ~ BT of Winload.exe file when you cancel the download of a new operating system?

  I searched throughout the transplant to the winload.exe ~ BT file that was left after an unsuccessful attempt to load Windows 7.  I was not able to delete the file.  Is it possible that he did to the motherboard?

  Hello

  -You are able to boot to the desktop?

  Follow the steps in this link and see if they help.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/windowsbtsystem-32-winloadexe-error-the-file-is/9d8c40d4-8843-4F90-85a1-418ab9794b5a

• What should I do when my computer is to do the diagnostic test, what happens with missing \windows\system,32\winload,exe?

  Please help my friend

  When my computer is to do the diagnostic test, what happens with \windows\system,32\winload,exe lack what should I do now, it's for a friends computer

  Please see: Missing file \Windows\system32\winload.exe

• OxcOOOOOOf error - file: \Windows\system32\winload.exe status: OxcOOOOOOf

  I get a message from Windows Boot Manager as follows: could not start Windows. A recent hardware or software change might be the cause. To solve the problem: 1. you insert the Windows installation disc, and then restart your computer. 2. choose your language settings, and then click "next". 3. click on "Repair your computer."  If you do not have this disc, contact you system administrator or computer manufacturer for assistance.  File: \Windows\system32\winload.exe status: OxcOOOOOOf Info: the selected entry could not be loaded because the application is missing or damaged.

  I have the drive, it won't start him.  I got the diagnostic tool memory to run.

  What should I do?

  See the Divine Logix post on this thread if it helps:

  Winload.exe is missing or damaged (no it isn't!)
  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/c99dc573-6842-4E28-8ec0-a63c61495308/

• I'm unable to complete the installation of Windows Vista. At the end of the installation it says "winload.exe is missing or damaged.

  Hi my name is Corey and I have a huge problem. I have windows xp media center edition and I cant' install windows vista. When I turn on my computer with vista DVD inserted, it starts very well. When he arrives at the end of the section "Windows loading files", I get an error saying winload.exe is missing or damaged. OMG! what I'm doing. Help, please!

  PS: I meet well above the requirements for vista.

  original title: PROBLEM of INSTALLATION of VISTA! WINLOAD. EXE, MISSING OR DAMAGED

  Hi xXCAS93Xx,

  Thank you for using Microsoft Vista answers Forums.

  ATTENTION: make sure that u save your file before the following steps.

  Here are a few rare to get this problem is resolved.

  1. put the Windows Vista installation disc in the disc drive, and then start the computer.

  2. press a key when you are prompted.

  3. Select a language, a time, a currency and a keyboard or another input method, and then click Next.

  4. click on repair your computer.

  5. click on the operating system that you want to repair, and then click Next.

  6. in the System Recovery Options dialog box, click Startup Repair.

  7 restart the computer.

  For a complete statement on another option on how to resolve this problem, see this link

  http://support.Microsoft.com/default.aspx/KB/927391

  Please let us know if there is need help or if this solves your problem.

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Winload.exe error on installing windows 7

  I'm trying to upgrade Windows Vista business to Windows7 Professional (the two 32-bit). In the first reboot during installation of windows7, I get an error saying that there is a problem with

  "File: /windows/system32/winload.exe.
  "Status: 0 xC0000001.
  and it recharges vista windows again. Is there a repair for allowing me to install Windows 7? My computer is a laptop / tablet ASUS R1E (convertible). It is more than 16 GB of space in my C drive too.

  Hello

  wrong forum

  It is to install vista, install windows 7

  Here's the forum link windows 7 installation

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

  and read this

  Windows 7 upgrade advisor

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows 7 system requirements

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

• Windows Vista startup in the Boot Manager Windows Im getting the message of File:\windows\system32\winload.exe and this isn't the start of the DVD

  Original title: Windows Vista upgrade to Windows boot disk boot manager is located in the computer but will not start up installation disc

  Im getting the message of File:\windows\system32\winload.exe

  Hi WillieGuyton,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what is the complete error message you receive?

  (4) what is the number of brand and model of your computer?

  Method 1:

  Step 1: disconnect any external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the link below to access pre - install the system recovery tools.

  How to access the System Recovery Options menu?

  Run the tool to restart system as shown in the link below
  How to use Startup Repair?

  
  Method 2:

  Step 1:

  Set the first boot device in the DVD in BIOS to boot from the Windows Installation DVD. To do this, see the documentation that came with the computer.

  Important: Change BIOS (Basic input output system) /semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Step 2: Follow the steps mentioned in the article below for the restoration of the Boot Configuration database (BCD) store

  Windows no longer starts after you install an earlier version of the Windows operating system in a dual-boot configuration

  http://support.Microsoft.com/kb/919529