Presario cq61: winload.exe... status: OxcOOOOOOf

Similar Questions

• PC with Windows Vista does not restart after installing updates, "Windows could not start...". "File:\Windows\system\winload.exe status: Oxcoooooof.

  Last night, I installed Windows updates on my HP Pavilion dv6227cl and now Windows will not boot.  I get the message "cannot start Windows.  A recent hardware or software change might be the cause.  File:\Windows\system\winload.exe status: Oxcoooooof Info: the selected entry could not be loaded because the application is missing or damaged.  I DO NOT have the Windows Setup disc.

  Hello

  I suggest you borrow the CD of windows vista to your friends

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you be able to start your computer in safe mode, I'd say make clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to see link and check.

  Error: Windows could not start. A recent hardware or software change might have caused the problem after installing Windows updates

  http://support.Microsoft.com/kb/2674065

• OxcOOOOOOf error - file: \Windows\system32\winload.exe status: OxcOOOOOOf

  I get a message from Windows Boot Manager as follows: could not start Windows. A recent hardware or software change might be the cause. To solve the problem: 1. you insert the Windows installation disc, and then restart your computer. 2. choose your language settings, and then click "next". 3. click on "Repair your computer."  If you do not have this disc, contact you system administrator or computer manufacturer for assistance.  File: \Windows\system32\winload.exe status: OxcOOOOOOf Info: the selected entry could not be loaded because the application is missing or damaged.

  I have the drive, it won't start him.  I got the diagnostic tool memory to run.

  What should I do?

  See the Divine Logix post on this thread if it helps:

  Winload.exe is missing or damaged (no it isn't!)
  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/c99dc573-6842-4E28-8ec0-a63c61495308/

• Vista, it lacks the file:\windows\system32\winload.exe.status:0xc000000f,D partition was installed at the factory, backup

  I deleted the contents of partition D on my friends family vista premium, now it will not boot from the disk of the plant, he said that the file:\Windows\system32\winLoad.exe is missing with status 0xc000000f were if I can get this file or is there anything I can do to get the content from the back of the drive D : or just that he can start up without this partition D

  Hello

  the D: Recovery partiton was photographed by the manufacturer during production

  Once deleted it

  you are not supposed to ever altering this partiton

  as you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• Windows\system32\winload.exe status: 0xc000000e__With raid 1

  So the winloader on vista ultimate 64 is somehow messed up, the raid 1 array works very well.  After start of the vista installation dvd and going through the repair option, it does not see the operating system... ok, load the drivers... still nothing.  Any ideas?

  This question is a bit Advanced for Windows answers Forum.  We don't often treat the problems involved RAID (especially those where access is denied by the normal methods).  The above was my best effort, but being a RAID 1 system, it did not work as I had hoped.  I recommend repost you in the Technet Forum:http://social.technet.microsoft.com/Forums/en-us/itprovistahardware/threads where people are a little more technical will be happy to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Winload.exe missing or damaged application

  Windows opens with the boot manager asks me to insert the windows installation disc reads the Message on the page windows file: \windows\system32\winload.exe status: 0xc000000e Info: the selected entry could not be loaded because the application is missing or corrupt

  PS: do not have a Setup disk

  > Ps: don't have a Setup disk

  That's not good.
  I think that the system or recovery disk is your last resort.
  If your laptop belongs to the European series of Toshiba you can order this disc here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Windows could not start. Winload.exe corrupted

  Been having some problems with my Equius has therefore decide to start, F8 and do a system restore toshiba.

  Started and started to format the drive. All of a sudden he projected blue.

  The problem is now I can not even start until now to get the recovery/restore option. I get: -.

  Windows could not start. A recent hardware or software change might be the
  cause...

  File: \Windows\system32\winload.exe
  Status: 0xc000000f
  Info: The selected entry could not be loaded because the application is
  missing or damaged.

  Not sure how it all works, but I guess that recovery stuff are stored on a separate partition. Problem is I guess you must be able to start to load windows before you even get to do this?

  I downloaded and tried a boot with no joy, and of course vista recovery disk, toshiba provide a vista disk. How the hell can I recover from this situation?

  Hello!

  If you are not able to get in the boot menu for HARD drive recovery, you must use a Microsoft Vista disc to reinstall the OS.
  Or you use the Toshiba recovery disc but I think you forgot to burn the disk because normally you get a message (recovery point) you want to burn the disc.

  However, you can order a Toshiba Toshiba recovery disc directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Re: Satellite A300D: winload.exe missing or damaged

  Hello

  I tried to make my system recovery using F8 and his works, but all of a sudden the battry during the operation failure.
  So I repated steps again after I connect the charger but I couldn't, and I got the message...

  + Windows cannot start. A recent hardware or software change might be the +.
  + talk +.
  + File: \Windows\system32\winload.exe+
  Status: 0xc000000f +.
  + Info: The selected entry could not be loaded because the application is +.
  + missing or damaged. +

  And I have no recovery DVDs to ther restore dvd,
  I need help to solve this problem, if there is an idea?

  My computer laptop satellite toshiba A300D

  Hello

  You mean that you are not able to recover the laptop using the HDD recovery procedure?
  You can begin the HARD drive by pressing F8, choose fix my computer.
  Then a new window should appear and you could choose a new option called Toshiba HDD recovery.

  If this is not possible then I think that you don't have a choice but to reinstall the OS using a Setup (Microsoft or Toshiba) disk.
  If you don t have this disc then you order on this website:
  https://backupmedia.Toshiba.EU/landing.aspx

  See you soon

• Winload.exe damaged or missing (0xc0000221)

  Have been running Vista on a T61 Lenovo Think Pad for more than a year and just today (just a week after the expiration of the warranty), windows vista does not completely start.  I get the black screen with the following error:

  Windows could not start. a recent change in hardware or software may be the cause. to resolve this problem:
  (boot from the cd and repair windows) (actually doesn't say that, but that's what he tells you to do)
  File: /windows/system32/winload.exe
  Status: 0xc0000221
  Info: the file is corupt possibaly. the header checksum does not match the checksum calculated.

  I created a boot disk (since the manufacturer did not provide with the laptop) and was able to perform the repair (with no luck) and system restore (with no luck).  I can get in the quick c: through the startup disk and I ran the BIOS screen HARD drive diagnosis and it happened (so far... still underway).

  The manufacturer support told me that I needed to remove or replace my HDD and reinstall Windows which I can't believe would be the solution to this...

  Help, please!

  Thank you.

  Hello bayareapianoman,

  Thank you for visiting the website of Microsoft Windows Vista Community.    You can try one of the options are using the System File Checker tool.  From the command prompt type the following command and press ENTER: sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A210 - 4 1: Winload.exe problem after having used the product recovery disc

  Hello

  I could really do with some help here. I have a PC laptop Toshiba Satellite A210 - 1 4. Disk partitioned with Vista home premium service pack 4.0.

  Last night, I used the product recovery disc supllied with the laptop in an attempt to restore its initial configuration.

  and the end of the procedure, I find myself with a prompt cmd with X:\windows\system32\cmd.exe in the high bit blue box indicating:

  Error: imageX could not apply vista F:\05993xsp.swm Index 2 of ODD to C:\!

  Press a key to continue. Box disappears then an administrator: X:\windows\system32\cmd.exe in the top blue bit indicating:

  waiting for ODD vacancies...
  STRANGE drive f: loan.
  Look for support in the F: drive...
  Failed to initialize the raid class.
  No RAID - continue normally...

  X:\Windows\System32 >

  Now every time the laptop trying to restart it just comes up with the error message:

  CANNOT START WINDOWS. A RECENT HARDWARE CHANGE OR SOFTWARE MAY BE THE
  CAUSE
  FILE: \WINDOWS\SYSTEM32\WINLOAD. EXE
  STATUS: 0XC000000E
  INFO: THE SELECTED ENTRY COULD NOT BE LOADED BECAUSE THE APPLICATION
  IS MISSING OR DAMAGED

  Below I have then have the possibility of esc or continue with the same result of the system attempts to restart.

  The recovery disc has no option of repair on this subject.

  need help please, I have no idea.

  Thank you

  Hello

  Looks like something was wrong during the recovery procedure.
  Have you tried to recover the laptop once more?
  If this isn't the case, you should definitely try this!

  You are right; hasn t drive recovery option for the repair because the recovery disk is not the same as a MS Vista drive. The recovery disk contains image files (it s a package) and the files contains Vista, Toshiba drivers, tools and additional software.

  So if something was happening well wrung out during the recovery procedure, you will not be able to repair the installation of the OS, but you need to run it again.

• Presario CQ61-312SA boot selection failed because a required device is inaccessible

  I get the message "boot selection failed because a required device is unreachable" on my computer laptop presario CQ61-312SA. I don't have the CD containing the disks but I do not have a premium Windows 7, 32 and 64-bit family OS disk. I tried to restore to former factory settings using f11 which does not reach 50%.

  Hello

  As I see that the hard drive on your unit has failed you need to replace the hard drive, then reinstall the operating system on your device then only unit will return to operational status.

  If your laptop is still under warranty, contact HP and arrange for the disc replaced.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

• Winload.exe error on installing windows 7

  I'm trying to upgrade Windows Vista business to Windows7 Professional (the two 32-bit). In the first reboot during installation of windows7, I get an error saying that there is a problem with

  "File: /windows/system32/winload.exe.
  "Status: 0 xC0000001.
  and it recharges vista windows again. Is there a repair for allowing me to install Windows 7? My computer is a laptop / tablet ASUS R1E (convertible). It is more than 16 GB of space in my C drive too.

  Hello

  wrong forum

  It is to install vista, install windows 7

  Here's the forum link windows 7 installation

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

  and read this

  Windows 7 upgrade advisor

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows 7 system requirements

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

• Windows 7 winload.exe error 0 x 0000428

  I installed vista and seven in dual boot. I installed vista with seven being previously. Bootmgr is missing, so I've used visual BCD to fix and then windows 7 has disappeared from the start screen. I used Easy BCD to create a new entry for in the splash screen using the player in which he has been installed. Now, when I tried to get I get the following error.

  Due to some recent hardware change blah blah blah...

  File:\Windows\System32\winload.exe

  Status: 0xc0000428

  Info: Windows cannot verify the digital signature for this file.

  They say to use F8, but pressing F8 I get the same screen. I can only access seven when I have a dvd bootable seven in my dvd player. And then, I installed seven but the same problem is still there. I tried to use the fix in seven dvd but it said it had fixed a few problems and then restarted without any solution. What should I do?

  Give me a detailed but easy tracking solution to...

  Hello

  This problem may occur if the bootstrapper does not find Windows 7 boot sector or boot file.

  Follow these steps:

  In Vista, open an elevated command prompt, Type (or copy and paste these if you wish).

  CD /d f:\windows\system32

  then press enter

  BCDboot f:\windows /s c:

  and then press ENTER.

  Close command prompt.

  Restart the pc.

  See this link - http://www.sevenforums.com/installation-setup/30572-problem-dualboot-vista-7-winload-exe-error-2.html

• Upgrade CPU, system does not boot, winload.exe "Windows cannot verify the digital signature for this file.

  Subject pretty much said it all.  I got a new CPU, shut down the computer, installed, and now Win7 does not start.  It hangs on a black screen gripe on a signature file.  Here is the full text:

  "A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source."

  If you have a Windows installation disc, insert the disc and restart your computer.  Click 'Repair your computer' and choose a recovery tool.

  Otherwise, to start Windows, so you can investigate further, press the ENTER key to display the boot menu, press F8 for Advanced Boot Options, select last known good configuration.  If you understand why the digital signature file cannot be verified and want to start Windows without this file, temporarily disable driver signature enforcement.

  File: \Windows\system32\winload.exe

  Status: 0xc0000428

  Info: Windows cannot verify the digital signature for this file. »

  Well, the first thing I did was put in the installation CD and reboot to try the thing "repair your computer".  Charge, said he found a problem, said he has fixed the problem and restarted.  But it always hangs on the same screen of the error.

  So I tried to hit Enter and then F8 as it said to do, but brings me right to the error screen.  I'm stuck, there is nothing that I can do, and I need this computer to work tomorrow.

  Another interesting note is that the recovery on the installation CD tool identifies my system installed Windows Vista... wtf.

  Help?

  I don't know if this post will solve your problem, but it can give you new ideas or angles to try.

  http://www.lifeworldblog.com/computers/Windows-7/Windows-cannot-verify-the-digital-signature-for-Winload-exe

• Vista \Windows\system32\winload.exe is missing, how can I get the Windows installation disc?

  I have a HP Pavilion dv6500 Laptop, I'm trying to restore my system, but the system wants to use a Windows Setup from disk because my windows/system32/winload.exe could not be loaded"status: 0xc000000f Info: the selected entry could not be loaded because the application is missing or damaged. »

  The windows installation is located in the machine, and apparently the recovery has not copied as part of the recovery disk.  I tried to identify if a recvery kit was available and it seems that maybe not.  What must I do to fix this?

  Have you tried to type the F11 key immediately after switching on the laptop. This should start in the hard disk partition recovery.

  You should be able to order by phone recovery disks. If you are USA / Ca... 1-800-474-6836