TMS CMR model

Similar Questions

• Provisioning of the TMS - the model schema question

  Hello

  I have read the deployment of TMSPE and tried to find the TMS Provisioning model for new Movi 4.4 schema, however, I could not find anything of cisco.com.

  Please help me where I can download the movi and schema of the model from the other end?

  Thank you

  Hello

  This model should be included in the bundle of jabber, when you download jabber 4.4.

  Sent by Cisco Support technique iPhone App

• TMS adding models participants cut name

  I noticed that TMS when you add participants to a conference models, if the name is long, he will cut any distance you expand the window.  As the participating models may have long names, it does not help that the window add a participants cut half of a long name.

  

  Hi Patrick,

  I tested in laboratory and its really taking only 30 characters and that's why the rest of the name is missing. No specific reason why these temlpates have such a long name.

  If long names are needed I think an enhancement request can be triggered.

  Concerning

  Sumeet Rakesh

• Orders of TMS provisioning models w/Custom

  I know that if you want to use custom commands to a model of TMS implementation you need to have in XML format.

  How can I put in the command "systemtools rootsettings" in XML format?  Otherwise said, we have 20 + systems and I'm trying to keep me from SSH in every single system, if I have to I will, but if I could put that in our model that normally push us when we get new systems, it will save a lot of time and help us greatly.

  SystemTools rootsettings

  use: rootsettings [on/series/off/never/get]

  Command to control the availability of the root user:

  Get the current value

  off root user is not available

  never superuser disabled permanently

  series [password] root user is available on the serial port only

  root user [password] is available on all ports.

  Thank you! Patrick

  Hi Patrik,

  It is not possible. 'systemtools' is not an accessible command through the API as xcommand or xconfiguration.

  You can always write a script, but that is not so easy if you've never done before. part the more difficult it will be to insert the password automatically.

  Good luck!

• Cannot add the conductor on the model of CMR TMSPE

  We strive to set up video-conference planning. Conductor and vTS are already integrated. Conductor is also integrated through the trunk SIP CUCM, for both ad hoc and permanent meeting. We were able to add the conductor on TMS as a device and TMSPE CMR model. But when we turn on HTTPS and signed a driver's certificate, unable to connect the driver TMSPE. We tried to create, sign and load the certificate for TMS, but still not able to connect. I hope you can help us. TMS is running on license eval. Conductor is essential and STM have 5 licenses of the screen. I've seen some answers on a few forums about Java version used with TMSPE.

  15.2.1 TMS

  TMSPE 1.7

  Update Java 8 102

  Conductor XC 4.2

  4.3.1.14 vTS

  Have you enabled 4096-bit encryption on the server where it is installed TMSPE by doing the required Java software changes indicated in the Notes of version 1.7 TMSPE? If you do not, TMSPE will not be able to communicate to the driver.

  You mention that you are trying to set up a schedule with TMS and conductor, generated TMSPE CMRS are not able to be used for planning. To set up planning, you need to configure Conference models/alias etc. on driver as well as in TMS, refer to the 'Conference on-demand management' section of the CMR premises Deployment Guide Release 7.0 - primary (for Unified CM) on pg 41.

• Jabber for iPad - model provisioning of TMS

  First of all, I didn't know where to post this... in the Jabber for iPad or article of telepresence.  So I thought as it comes to the TMS, I would put it here.

  Where can we download the MSDS provisioning model for the new Jabber for the release of the iPad, trying to set it up for the video?  It provides a link to where you can download the template, but there is no section for iPad.  Documentation on setting up with the TMS and VCS is linked below, it's just as if we were video configuration Jabber for telepresence (Windows/MAC).

  http://www.Cisco.com/en/us/docs/voice_ip_comm/Jabber/iPad/Admin_doc/output/b_Jabber_for_iPad_admin_guide_chapter_011.html#concept_2A3A1909CB6E43F19BECF9F04F765B75

  Thanks, Patrick

  Hi Tom and all,.

  The TMS Provisioning model is attached. It should be posted the ORC in the coming days.

  Thank you

  Paul

  Edit: The model of commissioning has been posted here on the EAC:

  http://download.Cisco.com/SWC/ESD/06/284288351/contract/jabbertablet_provisioning_template.XML

  Release notes are here:

  http://www.Cisco.com/en/us/docs/voice_ip_comm/Jabber/iPad/Release_notes/output/b_release_notes.html

  The attachment is deleted.

• Configuration model does not not on TMS MXP endpoints

  Hi team,

  We have a TMS 14.3.1 versioned and also many MXP and C series Endpoints.We was created on TMS configuration model to make the control of end of Far off on each endpoint. We created the model in TMS with the following selection of the 'avancΘs selection' IE Conference Farend of Mode of control in all systems. When we put it on the systems of the series C and series MXP, concluded that the model is working very well with endpoint endpoint C series but not even working on MXP endpoints. We rebooted the system and created the configuration template only for the MXP endpoint with conference Farend Mode control, end of the wrench and Far end camera Control and found doesn't work is not on the system.

  Our all the endpoints MXP are on versions F9.3.1.Please suggested in this

  What role selected must be selected as model for end so that he can work on the MXP endpoints.

  Concerning

  Tarun

  Not 100% sure what you want to do.

  Block the FECC for remote sites cannot control this system or disable FECC on this endpoint

  not being able to control the remote site.

  

  FECC is to disable to get controlled by remote control, the key is to disable the site remotely by remote control.

  If it does not you check if you can set via the api endpoint itself.

  Make a mark on the tms using http to manage could also show you what you use the template.

  If this does not help and you do not get a better answer here and you have a valid

  service contract, consider this escalation to Cisco TAC.

  Please remember useful frequency responses and identify useful or correct answers.

• Multi-party staff (PMP) operating instructions?

  Hello

  We have 25 license of Pmp.

  It seems really complicated to use this multi-party personal license.

  I did a lot of things described in the guides.

  End user is manually entered the CUCM and TMSPE with the same username.

  on CUCM, 69XX addressed to the conductor Rendezvous ip trunk.

  On the TMSPE section (Provisioning > users)

  Video address of the end-user and device address is the same.

  for example [email protected] / * /

  CMR model

  Conductor selected,

  SIP alias [email protected]/ * /.
  Verification of the digital model alias
  type to generate a number
  6901-6999

  and he created a 6946 tribune on Edit CMR number in the portal.

  And I tried to call from 6262, but it failed. Looks like I can't compose my own personal room.

  The conductor, he got this error.

  Call history

  Call information
  State	Inactive
  Start time	2016-09-02 15:26:26
  End time	2016-09-02 15:26:32
  Duration	6 seconds
  Disconnect the analytical reason	404 not found
  Disconnect the details of the pattern	B2BUA generated due to a TLS failure on evacuation 404 not found
  Tag	a7791db6-964E-4542-bad1-9687a075691a

  One side
  Source	SIP:[email protected]/ * /.
  URI of destination	SIP:[email protected]/ * /.
  Destination to	SIP:[email protected]/ * /.

  Side bridge
  Source	SIP:[email protected]/ * /.
  URI of destination	SIP:[email protected] / * /
  Destination to	SIP:[email protected] / * /

  Conductor shows 4 license assigned PMP.

  In fact, I just now how is conductor or / and determined TMS is a single room or not?

  Can I use this kind of static conference number?

  Kind regards

  Baris.

  Versions: CCM:10.5.2.13901 - conductor 2, 4.2, 4.3, GST TMS 15.2.1, TMSPE 1.7

  It is necessary to import AD users, because the solution uses the GUID of the user to ensure that they get assigned a PMP license, in the guide linked earlier, it's documented on pg 2 and is an example on the next page.

• Interval synchronization and TMSPE

  The fact that the LDAP/time synchronization interval is static, TMS causes a lot of headaches for organizations that deploy quickly end points configured to their user base.  Only they that must wait for the nightly synchronization or manually connect to TMS and this kickoff, which does not fit well when dealing with many wish someday and strong demand.

  In the TMS Agent model there was formerly a SQL, stored procedure, you can use to trigger synchronization, is there a similar way to trigger by LDAP Sync program under the TMSPE model?

  Hi, Frédéric

  I asked about this and was told that is not possible in TMSPE that the interval is embedded in the code. I know that it was possible for the TMS Agent Legacy.

  I guess a feature request is the way to go in order to get this configurable setting.

  / Magnus

• E-mail TMSXE 3.1 templates

  I just upgraded from TMSXE 3.0 3.1.  This was due to the incompatibility between the e-mail templates - we wanted people to get the same notifications if they were reserved by TMS or via outlook and the release notes said:

  "New templates of notification TMS Cisco Cisco TMSXE uses only Cisco TMS-generated e-mail patterns, insert its own notifications and error messages when necessary. Users will now get the consistent booking confirmations and notifications of events regardless of the booking client they use. »

  However, what I found is that TMSXE uses HTML despite the TMS booking model that is configured to use plain text under mail settings, so that the guest is still not in conformity.  Unfortunately, a small subset of users who will receive these notifications cannot view HTML emails, so why we use plain text.

  Is this expected behavior, a misconfiguration or a bug?

  Hi Nick,

  TMSXE use the e-mail templates available in TMS, and yes of TMS 14.2 I noticed that it uses the html template,

  You can customize with respective html template in TMS and changes should occur on the same.

  BR / Mahesh Adithiyha

• No search button in the system page in the Page value models Setup - TMS 14.3.1

  I'm trying to push Configuration templates to several systems on my MSD selectively, using the Serach system option in the option "Set it Systems ' Configuration model.

  

  When I type a name of any system for the first time, I click search option and be able to find this system.

  When other name of the system are typical for the second time, TMS does not show the search key.

  

  Seems to be a cosmetic issue and seen with all browsers.

  Bug ID: CSCun15404. Note that it may take a day or two until it is visible in the Bug Toolkit.

  Kjetil-

• TMS 13.2 set password Admin HTTPS through configuration for the Codec C series model

  We have more than 100 sets of C Codec managed by TMS, I made a model of configuration, including the password for "Admin" model, but it seems that what I put in model is not push to the Codec. What is the correct model for it

  We appreciate your help

  Thank you..

  Hello Randy.

  In my models for TMS, I use the following field to push admin password for codecs.  Since I first tried this option and it worked, I have never tried the other password fields that can be listed in the models.

  Definition: password

  System type: other type

• TMS C20 provisioning models.

  Where can I get them?

  Search through downloads, TMS and setting sections fast without success.

  End points of the C series not configured as EX or MX.

  They can be added to the TMS in the browser section and configured from there instead.

  Thank you
  Guy

  Sent by Cisco Support technique iPhone App

• The personal safety of CMR premise

  Hello

  I'm testing the personal CMR (TMS 14.5, 1.3 TMSPE, conductor XC2.4.1 with a TS 4.0).

  I have installed the TS under the conductor, the preference of installation service and a ' Feem - me "location with a specific IP address. On the CUCM set up a SIP trunk in this conductor "meet - me" IP address. On MSDS, I provissionned my user with TMSPE and on the parameters of my group, has added the conductor and created a model of CMR. I went on my personal of CMR and created my conference page.

  I wonder if I'm missing something but: is the Conference PIN, the only available for CMR staff on site security?

  • No participant host AND PIN/passwords strengthened to ensure that the Conference does not begin until the host has joined?
  • No mechanism to block additional people to join during execution meeting back to back to make sure that participants of the meeting could not reach on the first meeting until it is unlocked?
  • Any way to force a user to change the PIN code after each conference / multiple use of the Conference?
  • No automatic report to the host after a conference

  If there is only a conference PIN (that no one will ever bother to change), which prevents anyone from using my meeting room personal hosting his own meeting, without realizing me it, said once the Conference address and the PIN?

  Am I missing something, or this type of security features do not exist in the CMR version on site?

  With your current version of the software, the only thing available is the single PIN that you noted.  As you mention, if you go to 14.6 TMS and TMSPE 1.4, you can use separate host and invited him pines when it is configured with a server of telepresence using conductor.

  There is no method to block a person to join a conference once they know someone address CMR and pine, unless the PIN is changed by the user.  That said, there is no way to force a user to change the PIN code, it is something that the user have to get used to if they would like to do for extra security.  No report of any kind, a Director of MSDS may be able to take CDR data for the user, but I'm not 100% sure on that.

• VCS FindMe vs TMS FindMe

  Ladies and gentlemen,

  I have integrated our VCS (including management FindMe) in terms of a TMS, but subsequently in the VCS > status > Application > menu user Lync State I see the CMRS only, but not the end points recorded.
  I have several questions:

  1. How can I configure the TMS to publish endpoints of telepresence as an account FindMe (to see them as a registered Lync client)
  2. Currently all CMR have the status offline, is it possible to change their default online status?
  3. Finally: How can I restore the FindMe management to VCS of the TMS. In the latter case, I would be happy if I could put in place.

  Thank you
  Laszlo

  You can use TMSPE for a variety of uses, such as the provision of devices, FindMe, Collaboration meeting rooms, etc.  In your case, you use it to FindMe and CMR.

  Under Provisioning > users, manually create or import AD users and assign them a 'video address model. "  The boss of the address of the video will be their address FindMe and them will automatically create a FindMe account for each user in Provisioning > FindMe where all you have to do is to create associated device addresses, and locations, etc. that will connect to the address the user FindMe.

  The menu devices is for devices implemented and can be ignored in your case because you are not provisioning all devices through the VCS.