TMS login

Similar Questions

• Issue of 14.1.1 TMS Login banner

  I see the banner Login of TMS to appear on every page, I sail in TMS 14.1.1.

  We only see that after upgrading to TMS 14.1.1 - not seen in 13.2.1.

  Is there a way to avoid this. ?

  TMS has only been tested with IE and Firefox for Chrome can give you unexpected results for TMS that he has not been tested. Please see the installation guide for TMS 14.1.

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/TMS/Install_Guide/Cisco_TMS_install_guide_14-1.PDF

  Page 8

  Perhaps a feature request can be opened for trials with chrome.

  / Magnus

• TMS - DB Login Username = undefined (?)

  Hello everyone,

  After a TMS upgraded 13.2.1 in 14.1.1 I see not under TMS > administration tools > Extension Analytics Login username is "undefined". (See attached screenshot)

  Although I have the impression (after several tries), everything works fine...

  Anyone know how / if this affects the service or how to fix it?

  It makes me a little nervous

  Greetings,

  Mounir

  Magnus Ohm wrote:
  [...] Not 100% sure if this is removed on purpose when upgrading to 14.1.1 [...]
  

  No, it has nothing to do with anything specific 14.x.

  It is a known problem, the Tandberg 80893 reference number. It is purely cosmetic and will not affect the product in some way.

  Kind regards

  Kjetil

• For TMS Win2008 Server and SQL Server client access licenses?

  Where, I read that the TMSXE interface requires a CAL on the Exchange Server.  What I can't seem to locate is all information about client access licenses how are required to Win2008 R2 Server Standard Edition and SQL Server 2008 R2 Standard.  Is there a reference document that I'm missing with this information.  It seems that according to Microsofts definitions, you might need a CAL by user device and/or managed web that connects to the web interface.

  Can someone clarify the situation?

  Hello world

  So should put the closure of this thread, I have now clarified what follows when it comes to TMS and MS licenses:

  Users and administrators to connect to TMS authenticate AD, the server that hosts the TMS must be allowed to support authenticated connections. Don't authenticate TMS Managed/configure with AD devices via the web server. As a result, and as managed devices does not authenticate against IIS with AD login, these types of connections don't require licenses. Only users who connect to the Web site would be.

  The issue of Exchange and SQL are similar, that is, authenticated connections how are made?

  Of MSDS, all connections to SQL server use the same authenticated account, by default uses a SQL login.  Web site users are not authenticated to SQL Server. Therefore, and in the case of an external SQL Server, this would be equal to one.

  When communicating with Exchange, all connections are through a unique service account. Created for managed systems the mailboxes are not connected by users or MSDS for normal operation. As a result, and as with an external SQL Server, this would be also equal to one.

  Hope that clarifies completely now

  Rgds,

  Dale

• Questions of FindMe Provisioning/user between TMS & VCS

  Hello

  I have what seems to be a problem in service between TMS and VCS.

  Using TMS to import users from AD (from 2 domains of x), everything seems to work, and can see the users in the provisioning of TMS directory. MOVI users use AD authentication which connect properly.

  User login also works very well on the VCS (with connection LDAP AD). However when to call the findme users address VCS does not recognize the configured users? If you navigate in user accounts, the user is not displayed, if you run a search on VCS (users account address name or findme) findme VCS find the user. Once the user has been found and open if you click on save button (without changing details), the user will then appear in the VCS user accounts section and findme works correctly.

  We use the TMS 13.1.1 and VCS x7.0.2 (Cluster).

  I would like to know if you have solved your problems or you are still having problems? Any suggestions for help would be appreciated.

  Thank you

  Matt

  Hi Matthew.

  Findme users must fill in the "user accounts".

  But you must make sure that the VCS 'Cluster name' matches the 'SIP server address' in TMS.

  TMS:

  VCS:

  I hope this helps.

  / Magnus

• Migration of the TMS Movi/Jabber manually created the AD users

  I have a lot (75) of users created manually Movi/Jabber in TMS. When we turn to the AD authentication what is happening the old-fashioned manually created accounts? Have they disappeared? In addition, accounts created manually have the same username as their counterparts in AD. Which will cause a problem?

  Thanks advance!

  Douglas,

  I tested in the laboratory and it does not matter the user of the AD, it gives an error.

  

  Given that I had already 'Michael Schumacher' user added in the local database with the same login name database with AD synchronization does not matter the user and generates the error.

  I use TMS PE and TMS 14.3.2

  Concerning

  Alok

• How to add the CHT to TMS in Active Directory

  Hi all

  I am trying to add a TC to a TMS as a recording device, but it ends with an error "wrong username or password".

  Both TCS and TMS belong to a same ad (test.local), so I tried "domain/username" and "password", "[email protected] / * /" and "password", or simply "username" and "password", but none of them worked.

  Of course, I have already confirmed for TCS HTTP admin account is valid.

  Should I change configuration or something to add the CHT?

  TMS Version: 14.5.0
  TCS v6.1

  Kind regards

  Kotaro

  Hello Kotaro

  TMS uses the API TCS counts, not Windows.

  You must login in TCS Configuration > Site Settings > API > change password for the API

  BR Oleksandr

• Restriction of the user in TMS

  Hello

  Tried to limit the user login to TMS thanks to remove default user rights, but it did not.

  Tried to add advertisements and advertising connectivity test is also success but it doesnot restrict.

  Kind suggest how to limit users.

  Thank you

  VJ

  See Cisco TMS Admin guide starting on page 23 ;)

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/TMS...

  Sent by Cisco Support technique iPad App

• TMS 13.2 Administrative Tools

  Dear team,

  I installed TMS 13.2 on a windows 2008 R2 and SQL 2008 Server.

  I've configured SQL and can access TMS web page now.

  I don't get the option, the administration tools. Looks like I don't have the privilege to do this.

  I connected with the default system administrator account. (please see attachment)

  Can you please let me know how can I provide access to the Admin account to see the "Administrative Tools".

  Kind regards

  Sanchez

  The very first user to login after TMS is installed automatically becomes administrator and has full access to the web interface.  If you are not the first person to connect after the installation of TMS, can you try to login with the account that did.

  If you don't have access to the consulted first TMS account or any other account is never connected in addition to the one you use, you can use SQL Management Studio to change the database and give you administrative access to the web interface.

  1. Open the dbo. AclUser and note the identification number of the account in question.
  2. Change the dbo. AclUserGroup, register the above identification number under AclUser_Id and insert "1" under AclGroup_Id (1 is the Group Id for Site administrators).

  Example:

  • dbo. AclUser
  • • ID = 1003
    • User name = TMS\Administrator
  • dbo. AclUserGroup
  • • AclUser_Id = 1003
    • AclGroup_Id = 1

• Login screen hangs

  Hello.  Since I upgraded to macOS Sierra, my early 2015 MacBook Pro freezes on the login screen.  I tried clean install, reinstall, SMC reset, reset the NVRAM.  Nothing seems to help.  I can finally drag the cursor to the button stop, but it takes a while.  Once it starts up again it is fine... until I have restart or stop again.  Any thoughts?  Thank you.

  Try to start in safe mode (hold down the key of the SIFT when starting) once or twice. The login screen freezes?

• After Malware that my login is disabled cannot start in safe mode

  Hi if anyone can help.

  A friend tried to watch movies online, I'm not sure of the site they visited, but were asked to install MacKeeper and I believe that they did, as I noticed it was to download and installed the following day and I asked them why they did this and they said it was the only way to watch movies!

  Anyway to cut a long story short my friend then called me to say they received a "pop" window to say that my computer has a virus and call a number of 1800... I told them to do nothing certainly not call the number and I would like to sort.

  So basically since then that then I can not connect to my main account at the start, the section where you type your password won't let me type into it and there is a symbol of the brand of 'question' next to it. If I hold my mouse over the question mark I get a dialog box stating "Please enter your password to iCloud as... as well as the date. I can only login as a guest and I cannot connect in 'safe' mode by holding down the SHIFT key.

  I deleted the MacKeeper Application (and also another OS player application that is newly installed the same day!) and empty the memory cache of my browsers and also now upgraded to 10.11.6

  I also run disk utilities, but still I'm getting this problem trying to connect to my main user account!

  I think that it is some kind of malware, does anyone have ideas how to solve at least the connection problem?

  If I could stamp out to see if there is any malware stuff going on behind the scenes it would be too great!

  All suggestions welcome.

  Thanks, Ciaran

  

  How did you uninstall the MacKeeper application? Please be as specific as possible, unless you have followed the steps, I suspect that your system has installed to uninstall. If this is the case then you will need to re-install and uninstall immediately by following the instructions of developers. Otherwise, the best thing to do is to do a wipe and installing OS X and then manually install your applications and restore your data from your Time Machine backup.

  I'm sure you probably learned to not let this 'friend' enter the 100' of your computer.

• Login screen of change in the Sierra

  I wish to have an image that is displayed when the connection. How can I do that. Photo of connection used to be located in the Caches folder but no more.

  Please do not suggest changing the wallpaper in the system preferences is not what I am referring is login screen image that I would like to replace.

  Any help appreciated.

  My image of login is in the folder Macintosh HD/Library/Caches, as it has always been.

  Check again.

• BONES of Sierra crashing to the LOGIN screen while using the service of mission control.

  After Sierra OS upgrade my MacBook Pro hangs on login screen every time I have used the function of mission control.

  Hey hernj103,

  Thank you for using communities of Apple Support. I can see your post after upgrading to Mac OS Sierra that reboots your MacBook Pro, if you use mission control. There could be a number of reasons that could cause this and I want to help you have a reliable working Mac, so I'm here to help! If you have not already done, you want to make sure that you have a backup of your data and you can use the option in the link below:

  Use Time Machine to back up or restore your Mac

  Once your data is secure, you'll want to test this function in Mode safe mode and see if you get the same effect. Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs certain checks and prevents certain software from loading automatically or opening. Also, it verifies your startup disk and trying to fix problems if necessary directory and delete font caches, hiding the kernel and other files of the system cache. The following link can show you how to start your MacBook Pro in Mode safe.

  Try safe mode if your Mac does not end commissioning

  If you continue to have problems after the safe boot mode, let know us and we can continue to solve the problems there.

  See you soon.

• Can I change the login email address?

  When I initially set up my Mac Pro, I used my google e-mail address as my internet cable connection.  Now, I want to change that, so I can use my mac address.  How can I change this initial login e-mail address?

  What do you mean by "my internet cable connection?

  Just where you connect on the Mac?

  Looks like you need to contact your cable provider to change.

• Black login screen

  When starting, a black login screen prevents my screen 4 K of login in. Computer must be stopped with force and restarted. Memory NVRAM/PRAM resetting has not helped.

  It seems that it is a problem with the mac and display negotiate the appropriate resolution.

  You can use the mac at all? After the reboot, does it work?

  It works with a different view?

  You can try to connect "blind"? It is possible that after a disconnection of the display and the figure of mac it. (Weird, I know; but it is not really difficult to connect even without the screen, if you know what position in the list, your account is just press the left or right arrow keys, enter, password, enter).

  Maybe better, if you have access to another mac, use the screen sharing feature to connect; then go to system-> Display Preferences and try to choose a frame that works.