TMS Provisioning question

Similar Questions

• Problema con el modo TMS provisioning Extension

  Hola, No tengo soporte por lo than no puedo open el contrato a caso en tac

  Tengo los back following problems:

  1 uando yo activo el modo TMS provisioning, me dejan funcionar las llamadas sip, estos his los erroresque me appears:

  VCS-E cuando el are the llamada desde Internet toward the Red international.

  2013-09 - 05T 11: 50:38 - 04:30

  "" "" "" "TVCS: event = 'Search is complete" reason ="authorization not valid - insufficient privilege" Service = "H323" type-aliases-Src ="E164" CBC-alias = '7449"Dst-alias-type ="H323"Dst-alias ="anthony_accardi"call-number ="1a069dfa-1647-11e3-86f9-0010f328943a"Tag ="1a069f44-1647-11e3-b22f-0010f328943a"detail ="found: fake, searchtype:ARQ"Level ="1"elements UTCTime = '2013-09-05 16:20:38, 670"

  In el VCS - C the llamada cuando es desde red Interna toward Internet:

  2013-09 - 05T 11: 53:31 - 04:30

  "" "" "" "TVCS: event = 'Search is complete" reason ="prohibited" Service = "H323" type-aliases-Src ="E164" CBC-alias = '7429"Dst-alias-type ="H323"Dst-alias ="vianyfel_cordaro"call-number ="812a5198-1647-11e3-ba89-0010f325da04"Tag ="812a52e2-1647-11e3-93c9-0010f325da04"detail ="found: fake, searchtype:ARQ"Level ="1"elements UTCTime = '2013-09-05 16:23:31, 687"

  2013-09 - 05T 11: 53:31 - 04:30

  "" "" "TVCS: Event = 'research has attempted" Service ="H323" CBC-alias-type = "E164" CBC-alias ='7429"Dst-alias-type ="H323"Dst-alias ="vianyfel_cordaro"call-number ="812a5198-1647-11e3-ba89-0010f325da04"Tag ='812a52e2-1647-11e3-93c9-0010f325da04" detail = "searchtype:ARQ" Level = "1" elements UTCTime ='2013-09-05 16:23:31, 680"

  2013-09 - 05T 11: 53:23 - 04:30

  "" "" "" "TVCS: event = 'Search is complete" reason ="prohibited" Service = "H323" type-aliases-Src ="E164" CBC-alias = '7429"Dst-alias-type ="H323"Dst-alias ="vianyfel_cordaro"call-number ="7c9181c4-1647-11e3-bda8-0010f325da04"Tag ="7c918304-1647-11e3-865b-0010f325da04"detail ="found: fake, searchtype:ARQ"Level ="1"elements UTCTime = '2013-09-05 16:23:23, 974"

  Cuando el mod TMS Agent activated todo works correctamente esta

  2 Cuando cambio al modo TMS Provisioning yo puedo provisionar equipos desde red interna pero desde internet. Y lo mas than me floor are el jabber video, este are el error q appears:

  013 09 - 05 T 11: 07:42 - 04:30	"" "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 263"Module ="network.sip"Level = 'INFO': Src - ip ="192.168.0.252"Src-port ="25084"detail = 'receive the Request OPTIONS = method, Request-URI = sip: 192.168.0.250:7001; transport = tls, [email protected] / * /"
  2013-09 - 05T 11: 07:42 - 04:30

  "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 261"Module ="network.sip"Level ="DEBUG": Dst - ip ="192.168.0.252"Dst-port ="25084"
  SIPMSG:
  | SIP/2.0 401 Unauthorized
  Via: SIP/2.0/TLS 192.168.0.252:5061; branch = z9hG4bK4de281330ed1277914e57a4bb98ac81416134; received = 192.168.0.252; rport = 25084
  Call ID: [email protected]/ * /.
  CSeq: 38570 OPTIONS
  Starting at: ; tag = 21e96c96b3f9a439
  To: ; tag = ba0e03ca2f6b3957
  Server: TANDBERG/4120 (X7.2.1)
  WWW-Authenticate: Digest realm = "TraversalZone", nonce = "b40cb8278b4a11da992154324161d566d2b57bac3d83c5c518c4528c790d", opaque = "AQAAAN1NC9IHdFS3kNJ3Q6UX2JiBXhut", stale = FALSE, algorithm = MD5, qop = "auth".
  Content-Length: 0

  |

  2013-09 - 05T 11: 07:42 - 04:30

  "" "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 261"Module ="network.sip"Level = 'INFO': Dst - ip ="192.168.0.252"Dst-port ="25084"detail ="sending = 401, method = OPTIONS, To = sip response Code: 192.168.0.250:7001, [email protected] / * /"

  2013-09 - 05T 11: 07:42 - 04:30

  "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 261"Module ="network.sip"Level ="DEBUG": Src - ip ="192.168.0.252"Src-port ="25084"
  SIPMSG:
  | Sip OPTIONS: 192.168.0.250:7001; transport = tls SIP/2.0
  Via: SIP/2.0/TLS 192.168.0.252:5061; branch = z9hG4bK4de281330ed1277914e57a4bb98ac81416134; received = 192.168.0.252; rport = 25084
  Call ID: [email protected]/ * /.
  CSeq: 38570 OPTIONS
  Starting at: ; tag = 21e96c96b3f9a439
  TO:
  Max-Forwards: 0
  User-Agent: TANDBERG/4120 (X7.2.1)
  Support: com.tandberg.vcs.resourceusage
  Content-Type: text/xml
  Content-Length: 250

  25075024960|

  2013-09 - 05T 11: 07:42 - 04:30

  "" "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 261"Module ="network.sip"Level = 'INFO': Src - ip ="192.168.0.252"Src-port ="25084"detail = 'receive the Request OPTIONS = method, Request-URI = sip: 192.168.0.250:7001; transport = tls, [email protected] / * /"

  2013-09 - 05T 11: 07:36 - 04:30

  "" "" "TVCS: elements UTCTime = '2013-09-05 15:37:36, 757" Module ="network.tcp" Level = "DEBUG": Src - ip = "10.10.10.1" Src-port ="10191" Dst - ip = "10.10.10.10" Dst-port ='5060"detail = 'TCP connection is closed"

  2013-09 - 05T 11: 07:36 - 04:30

  "" TVCS: elements UTCTime = '2013-09-05 15:37:36, 641"Module ="network.sip"Level ="DEBUG": Dst - ip ="10.10.10.1"Dst-port ="10191"
  SIPMSG:
  | SIP/2.0 404 not found
  Via: SIP/2.0/TCP 201.210.111.54:2379; branch = z9hG4bK5fc6a3c5021e3557216ef01c2434fb00.1; received = 10.10.10.1; rport = 10191; DefaultZone = ingress-box
  Call ID: [email protected]/ * /.
  CSeq: 301 SUBSCRIBE
  From: <> [email protected] / * />; tag = 2991aa56d191ede3
  To: <> [email protected] / * />; tag = c4114db76ace49d8
  Server: TANDBERG/4120 (X7.2.1)
  WARNING: 200.11.230.253:5060 399 'political response '.
  Content-Length: 0

  |

  2013-09 - 05T 11: 07:36 - 04:30

  "" "" TVCS: elements UTCTime = '2013-09-05 15:37:36, 641"Module ="network.sip"Level = 'INFO': Dst - ip ="10.10.10.1"Dst-port ="10191"detail = 'send = 404, method = SUBSCRIBE, To = sip response Code: [email protected] / * /, [email protected] / * /"

  2013-09 - 05T 11: 07:36 - 04:30

  "" TVCS: elements UTCTime = '2013-09-05 15:37:36, 638"Module ="network.sip"Level ="DEBUG": Src - ip ="10.10.10.1"Src-port ="10191"
  SIPMSG:
  | Sip SUBSCRIBE:[email protected] / * / SIP/2.0
  Via: SIP/2.0/TCP 201.210.111.54:2379; branch = z9hG4bK5fc6a3c5021e3557216ef01c2434fb00.1; received = 10.10.10.1; rport = 10191
  Call ID: [email protected]/ * /.
  CSeq: 301 SUBSCRIBE
  Contact: <> [email protected]/ * /: 2379; transport = tcp >
  From: <> [email protected] / * />; tag = 2991aa56d191ede3
  To: <> [email protected] / * />
  Max-Forwards: 70
  Directions:
  User-Agent: TANDBERG/774 (4.6.3.17194 PCS) - Windows
  Expires: 300
  Event: ua-profile;model=movi;vendor=tandberg.com;profile-type=user;version=4.6.3.17194;clientid="S-1-5-21-1078081533-484061587-725345543";connectivity=1
  Accept: application/pidf + xml
  Content-Length: 0

  Este are el modelo authenticacion as uso y por tanto esa manera config:

  

  Config en VCS Expressway:

  TMS Agent Legacy mode

  Search rule:

  local area-no domain

  Any

  Any

  NO.

  Alias matching

  Regex

  (. +) @domain.com. *.

  Replace

  Continue

  LocalZone.GetDaylightChanges

  local area full URL

  Any

  Any

  NO.

  Alias matching

  Regex

  (. +) @domain.com. *.

  Leave

  Continue

  LocalZone.GetDaylightChanges

  Search of covered area rule

  Any

  Any

  NO.

  Any alias

  Continue

  TraversalZone

  Search for DNS zone rule

  Any

  AllZones

  NO.

  Alias matching

  Regex

  (?. *@%localdomains%.*$).*)

  Leave

  Continue

  DNSZone

  Transform

  Transform the alis destinations to URL

  ([^@]*)

  Regex

  Replace

  ------[email protected] / * /

  Presence PUA - on

  Presence server - off

  CONTROL VCS:

  TMS Extension commissioning of fashion

  Search rule

  local area-no domain

  Any

  Any

  NO.

  Alias matching

  Regex

  (. +) @domain.com. *.

  Replace

  Continue

  LocalZone.GetDaylightChanges

  local area full URL

  Any

  Any

  NO.

  Alias matching

  Regex

  (. +) @domain.com. *.

  Leave

  Continue

  LocalZone.GetDaylightChanges

  Search of covered area rule

  Any

  Any

  NO.

  Any alias

  Continue

  TraversalZone

  External IP address search rule

  Any

  Any

  NO.

  Any IP address

  Continue

  TraversalZone

  Transform

  Transform the alis destinations to URL

  ([^@]*)

  Regex

  Replace

  ------[email protected] / * /

  PUA - on

  presence server - on

  No tengo appeal policy

  Por favor ayudenem a worm as me falta?

  Gracias

  Hi, I do not read Spanish, but I read the newspapers.

  Why don't you use the domain "domain.com"? Could you change this to your own domain name?

  You call H323 to SIP? If you call of H323 and don't add not the domain (if you call SIP), you will not achieve this SIP unit, except if you add a search (or transformation) rule to add the field.

  Additionally, make sure that you have the possibility of the installed key (116341G 00) interoperability, and the interoperability that you allow users ("Registered only" or "On") on your VCS.

  Hope this helps,

  Arne

• How to check the MSDS 13.2 running MSD Agent (legacy mode) or TMS provisioning or extension of TMS provisioning services.

  Hello

  How to check the MSDS 13.2 running MSD Agent (legacy mode) or TMS provisioning or extension of TMS provisioning services.

  Kind regards

  Siva

  My TMS is strictly using Extension of Provisioning, because I am running 14.3.2 TMSPE is the only option for me, so I can't provide a screenshot.

  However check you by going to: administrative tools > Configuration > General settings, look for the commissioning Mode.

  That said, I suggest that you consider migrating to TMSPE if you have not already, that the recent version of TMS have removed TMS Agent legacy mode.  If you want to use the latest versions of TMS and take advantage of the features it provides, you will need to perform the migration, if not already done.

• Problem with the commissioning of Web check-in and ASK when swicht to the TMS Provisioning extend mode

  Hi, I need help please, because I have no contract and I cannot open a TAC case.

  I have the following two issues:

  1. when I do the tms extension preparation mode switch as stop working sip calls, I get the following error of internal and internet scenarios for my internal network:

  VCS-e when the call is the Internet to the internal network

  2013-09 - 05T 11: 50:38 - 04:30

  "" "" "" "TVCS: event = 'Search is complete" reason ="authorization not valid - insufficient privilege" Service = "H323" type-aliases-Src ="E164" CBC-alias = '7449"Dst-alias-type ="H323"Dst-alias ="anthony_accardi"call-number ="1a069dfa-1647-11e3-86f9-0010f328943a"Tag ="1a069f44-1647-11e3-b22f-0010f328943a"detail ="found: fake, searchtype:ARQ"Level ="1"elements UTCTime = '2013-09-05 16:20:38, 670"

  VCS - c when the call is internal network to the Internet:

  2013-09 - 05T 11: 53:31 - 04:30

  "" "" "" "TVCS: event = 'Search is complete" reason ="prohibited" Service = "H323" type-aliases-Src ="E164" CBC-alias = '7429"Dst-alias-type ="H323"Dst-alias ="vianyfel_cordaro"call-number ="812a5198-1647-11e3-ba89-0010f325da04"Tag ="812a52e2-1647-11e3-93c9-0010f325da04"detail ="found: fake, searchtype:ARQ"Level ="1"elements UTCTime = '2013-09-05 16:23:31, 687"

  2013-09 - 05T 11: 53:31 - 04:30

  "" "" "TVCS: Event = 'research has attempted" Service ="H323" CBC-alias-type = "E164" CBC-alias ='7429"Dst-alias-type ="H323"Dst-alias ="vianyfel_cordaro"call-number ="812a5198-1647-11e3-ba89-0010f325da04"Tag ='812a52e2-1647-11e3-93c9-0010f325da04" detail = "searchtype:ARQ" Level = "1" elements UTCTime ='2013-09-05 16:23:31, 680"

  2013-09 - 05T 11: 53:23 - 04:30

  "" "" "" "TVCS: event = 'Search is complete" reason ="prohibited" Service = "H323" type-aliases-Src ="E164" CBC-alias = '7429"Dst-alias-type ="H323"Dst-alias ="vianyfel_cordaro"call-number ="7c9181c4-1647-11e3-bda8-0010f325da04"Tag ="7c918304-1647-11e3-865b-0010f325da04"detail ="found: fake, searchtype:ARQ"Level ="1"elements UTCTime = '2013-09-05 16:23:23, 974"

  BUT WHEN THE MODE IS AGENT LEGACY TMS ALL THE CALL WORKS FINE

  2 when I switch I can tms mode of preparation I can do internal network equipment supply but not from the outside and this worries me more is the jabber that being Internet I get the following error:

  013 09 - 05 T 11: 07:42 - 04:30	"" "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 263"Module ="network.sip"Level = 'INFO': Src - ip ="192.168.0.252"Src-port ="25084"detail = 'receive the Request OPTIONS = method, Request-URI = sip: 192.168.0.250:7001; transport = tls, [email protected] / * /"
  2013-09 - 05T 11: 07:42 - 04:30

  "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 261"Module ="network.sip"Level ="DEBUG": Dst - ip ="192.168.0.252"Dst-port ="25084"
  SIPMSG:
  | SIP/2.0 401 Unauthorized
  Via: SIP/2.0/TLS 192.168.0.252:5061; branch = z9hG4bK4de281330ed1277914e57a4bb98ac81416134; received = 192.168.0.252; rport = 25084
  Call ID: [email protected]/ * /.
  CSeq: 38570 OPTIONS
  Starting at: ; tag = 21e96c96b3f9a439
  To: ; tag = ba0e03ca2f6b3957
  Server: TANDBERG/4120 (X7.2.1)
  WWW-Authenticate: Digest realm = "TraversalZone", nonce = "b40cb8278b4a11da992154324161d566d2b57bac3d83c5c518c4528c790d", opaque = "AQAAAN1NC9IHdFS3kNJ3Q6UX2JiBXhut", stale = FALSE, algorithm = MD5, qop = "auth".
  Content-Length: 0

  |

  2013-09 - 05T 11: 07:42 - 04:30

  "" "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 261"Module ="network.sip"Level = 'INFO': Dst - ip ="192.168.0.252"Dst-port ="25084"detail ="sending = 401, method = OPTIONS, To = sip response Code: 192.168.0.250:7001, [email protected] / * /"

  2013-09 - 05T 11: 07:42 - 04:30

  "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 261"Module ="network.sip"Level ="DEBUG": Src - ip ="192.168.0.252"Src-port ="25084"
  SIPMSG:
  | Sip OPTIONS: 192.168.0.250:7001; transport = tls SIP/2.0
  Via: SIP/2.0/TLS 192.168.0.252:5061; branch = z9hG4bK4de281330ed1277914e57a4bb98ac81416134; received = 192.168.0.252; rport = 25084
  Call ID: [email protected]/ * /.
  CSeq: 38570 OPTIONS
  Starting at: ; tag = 21e96c96b3f9a439
  TO:
  Max-Forwards: 0
  User-Agent: TANDBERG/4120 (X7.2.1)
  Support: com.tandberg.vcs.resourceusage
  Content-Type: text/xml
  Content-Length: 250

  25075024960|

  2013-09 - 05T 11: 07:42 - 04:30

  "" "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 261"Module ="network.sip"Level = 'INFO': Src - ip ="192.168.0.252"Src-port ="25084"detail = 'receive the Request OPTIONS = method, Request-URI = sip: 192.168.0.250:7001; transport = tls, [email protected] / * /"

  2013-09 - 05T 11: 07:36 - 04:30

  "" "" "TVCS: elements UTCTime = '2013-09-05 15:37:36, 757" Module ="network.tcp" Level = "DEBUG": Src - ip = "10.10.10.1" Src-port ="10191" Dst - ip = "10.10.10.10" Dst-port ='5060"detail = 'TCP connection is closed"

  2013-09 - 05T 11: 07:36 - 04:30

  "" TVCS: elements UTCTime = '2013-09-05 15:37:36, 641"Module ="network.sip"Level ="DEBUG": Dst - ip ="10.10.10.1"Dst-port ="10191"
  SIPMSG:
  | SIP/2.0 404 not found
  Via: SIP/2.0/TCP 201.210.111.54:2379; branch = z9hG4bK5fc6a3c5021e3557216ef01c2434fb00.1; received = 10.10.10.1; rport = 10191; DefaultZone = ingress-box
  Call ID: [email protected]/ * /.
  CSeq: 301 SUBSCRIBE
  From: <> [email protected] / * />; tag = 2991aa56d191ede3
  To: <> [email protected] / * />; tag = c4114db76ace49d8
  Server: TANDBERG/4120 (X7.2.1)
  WARNING: 200.11.230.253:5060 399 'political response '.
  Content-Length: 0

  |

  2013-09 - 05T 11: 07:36 - 04:30

  "" "" TVCS: elements UTCTime = '2013-09-05 15:37:36, 641"Module ="network.sip"Level = 'INFO': Dst - ip ="10.10.10.1"Dst-port ="10191"detail = 'send = 404, method = SUBSCRIBE, To = sip response Code: [email protected] / * /, [email protected] / * /"

  2013-09 - 05T 11: 07:36 - 04:30

  "" TVCS: elements UTCTime = '2013-09-05 15:37:36, 638"Module ="network.sip"Level ="DEBUG": Src - ip ="10.10.10.1"Src-port ="10191"
  SIPMSG:
  | Sip SUBSCRIBE:[email protected] / * / SIP/2.0
  Via: SIP/2.0/TCP 201.210.111.54:2379; branch = z9hG4bK5fc6a3c5021e3557216ef01c2434fb00.1; received = 10.10.10.1; rport = 10191
  Call ID: [email protected]/ * /.
  CSeq: 301 SUBSCRIBE
  Contact: <> [email protected]/ * /: 2379; transport = tcp >
  From: <> [email protected] / * />; tag = 2991aa56d191ede3
  To: <> [email protected] / * />
  Max-Forwards: 70
  Directions:
  User-Agent: TANDBERG/774 (4.6.3.17194 PCS) - Windows
  Expires: 300
  Event: ua-profile;model=movi;vendor=tandberg.com;profile-type=user;version=4.6.3.17194;clientid="S-1-5-21-1078081533-484061587-725345543";connectivity=1
  Accept: application/pidf + xml
  Content-Length: 0

  The setup I have is:

  

  Configuration on VCS Expressway:

  TMS Agent Legacy mode

  Search rule:

  local area-no domain

  Any

  Any

  NO.

  Alias matching

  Regex

  (. +) @domain.com. *.

  Replace

  Continue

  LocalZone.GetDaylightChanges

  local area full URL

  Any

  Any

  NO.

  Alias matching

  Regex

  (. +) @domain.com. *.

  Leave

  Continue

  LocalZone.GetDaylightChanges

  Search of covered area rule

  Any

  Any

  NO.

  Any alias

  Continue

  TraversalZone

  Search for DNS zone rule

  Any

  AllZones

  NO.

  Alias matching

  Regex

  (?. *@%localdomains%.*$).*)

  Leave

  Continue

  DNSZone

  Transform

  Transform the alis destinations to URL

  ([^@]*)

  Regex

  Replace

  ------[email protected] / * /

  Presence PUA - on

  Presence server - off

  CONTROL VCS:

  TMS Extension commissioning of fashion

  Search rule

  local area-no domain

  Any

  Any

  NO.

  Alias matching

  Regex

  (. +) @domain.com. *.

  Replace

  Continue

  LocalZone.GetDaylightChanges

  local area full URL

  Any

  Any

  NO.

  Alias matching

  Regex

  (. +) @domain.com. *.

  Leave

  Continue

  LocalZone.GetDaylightChanges

  Search of covered area rule

  Any

  Any

  NO.

  Any alias

  Continue

  TraversalZone

  External IP address search rule

  Any

  Any

  NO.

  Any IP address

  Continue

  TraversalZone

  Transform

  Transform the alis destinations to URL

  ([^@]*)

  Regex

  Replace

  ------[email protected] / * /

  PUA - on

  presence server - on

  I do not have political appeal hace

  Please help me to see what I'm missing or what's wrong?

  Thankss

  Hello

  Ok. Are you saying that VCSe uses the IP address 10.10.10.10 in interface external, right? Of course, what the IP address of 200.x.x.x? It's your VCSe NAT IP address, right? What is this configured in VCSe?

  Well, reaally you have a problem of NAT. look at the SUBSCRIPTION message of jabber to VCSe:

  SIPMSG:

  | Sip SUBSCRIBE:[email protected] / * / SIP/2.0

  Via: SIP/2.0/TCP 201.210.116.201:3612; branch = z9hG4bK138dca6bf6cdd458588900dbaf7b45f4.1; received = 10.10.10.1; rport = 9368

  Call ID: [email protected]/ * /.

  CSeq: 301 SUBSCRIBE

  Contact:

  From: [email protected] / * />; tag = 1e82c817dc3224d5

  In: [email protected] / * />

  Max-Forwards: 70

  Directions:

  User-Agent: TANDBERG/774 (4.6.3.17194 PCS) - Windows

  Expires: 300

  Event: ua-profile;model=movi;vendor=tandberg.com;profile-type=user;version=4.6.3.17194;clientid="S-1-5-21-1078081533-484061587-725345543";connectivity=1

  Accept: application/pidf + xml

  Content-Length: 0

  Do you see? If the Red 192.168.41.205 IP address is the IP address of your router/nat, then you can come to the conclusion that your router is inspection/ALG, it puts its own IP address in the SIP headers. Your router/firewall device should not use any function ALG/inspection, otherwise you will have problems.

  I can say with great confidence, VCSe rejects the message SUBSCRIBE "404 not found" response because VCSE does not recognize this IP address in the field 'road', 192.168.41.205.

  In addition, the configuration of your NAT is not recommended. First, you use the port-based NAT (PAT), in fact, you must use a NAT. Second, when your NAT firewall allows VCSe, the source address is 10.10.10.1, which means that your firewall is NATing the source address and destination address not only. This type of NAT, it is not recommended for h.323/SIP applications.

  Well, don't be angry with me, I try to help, but I need to say, your deployment VCSe is almost completely false, there are a lot of blind spots.

  I suggest reviewing and reconfigure your deployment following this guide:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/VCs/config_guide/Cisco_VCS_Basic_Configuration_Control_with_Expressway_Deployment_Guide_X7-2.PDF

  I hope this helps.

  Concerning

  Paulo Souza

  My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."

• TMS Provisioning of E20/C-Series

  Is there a step by step documentation that explains what really what and how to configure the E20 and a C Series codec in TMS and the device itself?  I know the provisioing guides, but they are not very clear on what all is possible, or on all necessary steps, at least for me, it is.  I was going to try to do a test, I want to just make sure I do everything correct.  In addition, if a device is put into service, should it be added as a system itself in MSDS?

  Hello

  You don't have to add the e20 to tms the available through the vcs. Of MSDS to "provision" devices use you the configuration and then models the systems must be managed by tms.

  I don't know if there are specific to that guides. Have you looked into the endpoints administration guide? I'm on my iphone so I can't check, but it can be a few tips it?

  / Magnus

  Sent by Cisco Support technique iPhone App

• TMS Provisioning, does not automatically synchronize the AD user

  Hi all

  I have a problem with a repertoire of Provisioning TMS which are synchronized with the directory of the AD.

  If I manually start sync, that works very well.

  I see in the Info that will be the next time you start 04:00, but it is not synchronized with the ad automatically, only works manually.

  Does anyone have an idea where I can find the log that records this synchronization.

  I also know that this time is not editable, it is perhaps possible in the NMR netx 13.2 with extension 2.0 Provisioning?

  Thanks for any input

  Best regards

  Georg

  Hi Georg

  Try this:

  USE TMSNG

  SET IDENTITY_INSERT [dbo]. [SchedulerEvent] WE

  INSERT INTO [dbo]. [SchedulerEvent] ([Id], [EventServiceName], [EventServiceDLL], [PrimaryServerId], [start], [CancelTime], [ExpireTime], [status], [SchedulerRuntimeStatus_Id], [priority], [progress], [EventDescription], [Settings], [EventLog], [ReoccurenceRule], [RestartTime], [AllowGUIDelete], [ExternalEventId], [RejectList], [Owner_aclUser_Id], [SendSuccessEvent], [SendFailureEvent], [LastEventLogEntry]) VALUES (12, is Tandberg. TMS. Service.TMSAgent.TMSAgentUserImportEventHandler', N ", N", ' 26-06-2009 04:00 ', ' 2009-06-26 16:00 ', ' 2109-06-26 04:00 ', N 'Log_All_Pending', 1, 1, 0, not Log_ScheduleUserImportEventHandler_Description |', N ", not 2009-06-26 09:05:52 | Log_Settings_Created', N 'EVERY1DAY', ' 2009-06-27 04:00 ', 0, NULL, NULL, 1, 0, 0, N ");

  SET IDENTITY_INSERT [dbo]. [SchedulerEvent] OFF

  This should trigger it to start automatically.

  And no, you cannot set the time in the new model of commissioning.

  / Magnus

• TMS database question

  Hello

  I found this help, anyone know where I can run under SQL statements? Thank you!

  Displays disk space for each partition on the database server. To do this, the OLE Automation procedures option must be enabled. For new instances of SQL Server 2005, OLE Automation procedures are disabled by default. To activate this option, run the following SQL statements on your SQL Server

  sp_configure 'show advanced options', 1;
  GO
  RECONFIGURE;
  GO
  sp_configure 'Ole Automation Procedures', 1;
  GO
  RECONFIGURE;
  GO

  On your server TMS, go to a command prompt and use the SQLCMD.exe to connect to your database and run the commands.

  IE sqlcmd. EXE-S. \SQLTMS EI

  where. \SQLTMS is the location of your MSDS database instance

  You can then issue the commands in your first post.

• TMS Provisioning Extension required for Jabber Video

  All,

  I'd check that commissioning Extension is not required for TMS (14.x) allow video exterenal Jabber users to participate in a video conference on a microcontroller.  These will be not registered in VCS video external Jabber users.

  Thank you

  John

  I guess video Jabber users will be registered to someone else is VCS or using the free video by Cisco Jabber service?  If so, that Yes, you don't need TMSPE, it is only necessary if YOU are commissioning and providing video Jabber service to others.

• Orders of TMS provisioning models w/Custom

  I know that if you want to use custom commands to a model of TMS implementation you need to have in XML format.

  How can I put in the command "systemtools rootsettings" in XML format?  Otherwise said, we have 20 + systems and I'm trying to keep me from SSH in every single system, if I have to I will, but if I could put that in our model that normally push us when we get new systems, it will save a lot of time and help us greatly.

  SystemTools rootsettings

  use: rootsettings [on/series/off/never/get]

  Command to control the availability of the root user:

  Get the current value

  off root user is not available

  never superuser disabled permanently

  series [password] root user is available on the serial port only

  root user [password] is available on all ports.

  Thank you! Patrick

  Hi Patrik,

  It is not possible. 'systemtools' is not an accessible command through the API as xcommand or xconfiguration.

  You can always write a script, but that is not so easy if you've never done before. part the more difficult it will be to insert the password automatically.

  Good luck!

• Thin provisioning question

  Tonight

  We recently P2V. by 4 Dell servers that all went well.

  When it came to thin provisioning of storage, we encountered a slight impediment. No matter what we do, we cannot recover any space with a provisioning.

  For example, we have only one server, 62 GB C. We have done the following:

  Defragmented

  CHKDSK would be

  SDelete - c (and even z, followed by another - c)

  Then migrate to another store of data configured as thin. We seem to get 0 space back even if Windows reports being 31.6 GB of free disk space.

  Don't get me wrong in the past doing the 4 steps above still retrieved the free space, but just this time on all 4 servers, we cannot recover anything.

  I have even converted to thick, and then to thin in case something to be funny.

  With the help of ESX 4 fully patched on all hosts. The only thing I can think is that when we thin put in service in the past, we were running ESX 4 with no patches and we have recently updated to the current version, but I can't really believe that a fix/update would have broken something as Basic.

  Any idea?

  There is a very simple solution for this problem, I found a couple of weeks ago.

  Do the usual "sdelete - c C:" stuff, and then migrate as Thin put in service in a store of data with a * different blocksize *.

  Then it just works how it has always been.

  It's only when you migrate it to a store of data with the same size block, it's broken.

  --

  Jules

  [email protected]

  www.Jules.FM

• 7921 EAP - FAST PAC provisioning question (ACS 4.2.0.124.6)

  I'm doing anonymous, CAP of some new 7921 phones with ACS 4.2.0.124.6.

  I created a user & pwd on the phone and add this user to the ACS.

  I have configured the WLC, ACS & phone in accordance with the deployment of 7921 guide (although there are a few options now GBA 4.2).

  When the phone tent first authenticate with ACS, I see failures of connection on ACS for the "anonymous" user I guess it's something to do with the supply of CAP (phase failure 0 etc..).

  But all I see is failures of continuous connection on ACS, and no commissioning CAP occurs.

  Is there maybe another setting I'm missing? Anyone see a similar problem when you try to do this?

  TIA.

  Nigel.

  Here is a screenshot of the wlan

• PeopleSoft IOM UM connector provisioning question

  Oracle Identity Manager 11.1.2.2.0

  Managing users of PeopleSoft 11.1.1.6.0

  
  

  I get the below error whenever I try to set up an account of peoplesoft by IOM:
  

  "[Error when running the utility: unable to connect to peoplesoft: OIMUM@[HOSTNAME] is a user ID invalid, or that you have entered the wrong password."  User ID and password are required and that is case-sensitive.  Make sure that you type in the correct upper and lower case.

  
  

  For some reason any IOM hostname is annexed for the service account by attempting a connection to the target system and that could be the cause of the problem. PeopleSoft my system is on another machine. I haven't tried to research how the host name is added, but I have no chance to find the cause of this one.

  
  

  Any ideas on this would be great.
  

  This problem has been resolved through the system pointing to the wrong system of target of PeopleSoft.

• VMware View - provisioning question of desktop computers

  I'm new to VMware View and just build a my QA cluster environment.  I have installed/configured view administrator on a dedicated virtual machine and installed/configured on my server vCenter composer.  I created a gold statue (called, joined the domain, configured custom parameters, view agent installed) and converted to a model. Then, I created a pool on my server administrator to view and added 10 desktop computers.  They have all implemented successfully, however, they all have the same computer name (same name, I named the machine of the gold statue).  The machines that appear in VMware show the naming convention that I created, but the internal computer name is the same for all. I guess that the DNS name.  also, I can have these machines added to the announcement through this process or do they need to be predefined?

  Customization = None seems to be the reason. When we customize him clone all the related machine settings are kept from the model VM, which are the name of the Machine, machine SID, the work/domain group settings, etc. That's why you see Office all the same names as those given to the model. You can create a customization specification in the CR. Instructions to create a file of customiztion specifications in vCenter can be found at:

  http://pubs.vmware.com/vsphere-4-esx-vcenter/index.jsp?topic=/com.vmware.vsphere.vmadmin.doc_41/vsp_vm_guide/deploy_vms_from_templates_and_clones/t_create_a_customization_specification_for_windows.html

  Use this technique of customization when you create the pool. Hope that helps.

• Provisioning of the TMS - the model schema question

  Hello

  I have read the deployment of TMSPE and tried to find the TMS Provisioning model for new Movi 4.4 schema, however, I could not find anything of cisco.com.

  Please help me where I can download the movi and schema of the model from the other end?

  Thank you

  Hello

  This model should be included in the bundle of jabber, when you download jabber 4.4.

  Sent by Cisco Support technique iPhone App

• Jabber for iPad - model provisioning of TMS

  First of all, I didn't know where to post this... in the Jabber for iPad or article of telepresence.  So I thought as it comes to the TMS, I would put it here.

  Where can we download the MSDS provisioning model for the new Jabber for the release of the iPad, trying to set it up for the video?  It provides a link to where you can download the template, but there is no section for iPad.  Documentation on setting up with the TMS and VCS is linked below, it's just as if we were video configuration Jabber for telepresence (Windows/MAC).

  http://www.Cisco.com/en/us/docs/voice_ip_comm/Jabber/iPad/Admin_doc/output/b_Jabber_for_iPad_admin_guide_chapter_011.html#concept_2A3A1909CB6E43F19BECF9F04F765B75

  Thanks, Patrick

  Hi Tom and all,.

  The TMS Provisioning model is attached. It should be posted the ORC in the coming days.

  Thank you

  Paul

  Edit: The model of commissioning has been posted here on the EAC:

  http://download.Cisco.com/SWC/ESD/06/284288351/contract/jabbertablet_provisioning_template.XML

  Release notes are here:

  http://www.Cisco.com/en/us/docs/voice_ip_comm/Jabber/iPad/Release_notes/output/b_release_notes.html

  The attachment is deleted.