7921 EAP - FAST PAC provisioning question (ACS 4.2.0.124.6)

Similar Questions

• Use EAP-FAST with ACS 5.2

  Hello everyone,

  I use Active Directory as external identity for ACS store. In ACS 5.2 Web interface to navigate to of access policies > Access Services and going tab protocols allowed , the only protocol that works is PAP/ASCII. In the documentation of ACS, it is described as the less secure authentication for ACS.

  I would use EAP-FAST. Should what command I enter on the aaa client to work with? The router's IOS version 12.4.

  Here is his aaa configuration:

  AAA new-model
  !
  !
  AAA server Ganymede group + ACSTEST1
  Server 1.1.1.1

  2.2.2.2 Server

  !
  AAA authentication banner ^ CCCCCC * GANYMEDE + server is not available, use local defC
  AAA-authentication failure message ^ C
  AAA authentication login default group Ganymede +.
  Connection authentication AAA VTY Ganymede + local group
  Connection authentication AAA CONSOLE Ganymede + local group
  the AAA authentication enable default group Ganymede + activate
  AAA authorization exec default group Ganymede + authenticated if
  AAA authorization commands 1 default group Ganymede + authenticated if
  AAA authorization commands 15 default group Ganymede + authenticated if
  AAA accounting exec default start-stop Ganymede group.
  orders accounting AAA 15 by default start-stop Ganymede group.
  AAA accounting system default start-stop Ganymede group.
  !
  !
  AAA - the id of the joint session

  I have found no help in the Cisco IOS Security command reference or in the Internet.

  Thank you for your help.

  Best regards, Andy

  Hello

  GANYMEDE + authentication is only supported by the PAP, is not possible to use EAP-FAST.

  Please keep in mind that the EAP methods using RADIUS, and not with GANYMEDE.

  HTH,
  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• WLC4402, SSC 4.0, EAP FAST with ACS 4.1.23 and Active Directory

  Hi all

  I have a problem where my client software SSC (Cisco Secure Services)-wireless on laptops don't will authenticate the windows domain users if they enter the user name and passwords manually. The unique signature feature will not work. I am using EAP-FAST. It is an ACS appliance based server that I restored from the recovery CD.

  When I look at the failure of authentication request I can see that she is trying to send [email protected] / * / during an attempt to SSO on. The log shows that it is a bad user name or password. Note that the end of the domain name is missing.

  I can see the authentication attempt in the log of the remote agent (CSWINagent.log) on the domain controller, so I don't know that it sends the connection request to the domain controller. The Remote Agent is the same version as the ACS server. When I authenticate successfully (manually) it sends not the domain part of the user.

  This is a new installation. Initially, I had 2 remote agents, both on the service domain controllers has been run under an account with sufficient privileges windows domain administrator. After a planned turn off weekend windows authentication has stopped working completely. I found a post in this forum that says to use the local system to start the remote agent service. This led windows authentication to life, but now I have this problem. I don't know that until I changed it the manual connection is also required in domain (IE user domain\username). I can't be sure that this is the case!

  Can anyone help me to get windows AD to accept these credentials, because they are sent to the client connection? Otherwise if I can make it work with the user account, he worked with initially then that would be great.

  Thank you very much

  As you mentioned that SSC transmits the username "[email protected] / * /" in SSO.

  Is what I think for the moment, to use the feature of Distribution of Proxy on ACS.

  that is, demand to come as it is "[email protected] / * /', let's make ACS Stip off"@domaine"and"username"to RA for AD verification."

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.1/user/NetCfg.html#wp342969

  After stripping '@domaine' send the request back to the ACS it itself, i.e. in the column forward to, ensure that we have input of the ACS.

  And let me know if it works for you?

  Kind regards

  Prem

• Why the fan on my macbook pro continue to run at a fast pace for long periods?

  The MacBook Pro mid-2010

  OS X El Capitan, 10.11.3 version

  Processor: 2.4 GHz Intel Core 2 duo

  Memory: 4 GB 1067 MHz DDR3

  Graphics card: NVIDIA GeForce 320 M 256 MB

  163 GB available

  iWorks ' 09 has been upgraded to the latest versions

  No new upgrade is available for the system.

  My Question: Why the fan on my macbook pro continues to run at a fast pace for long periods?

  I guess that the fan runs constantly, because the CPU is working at a high rate. I rebooted several times but without any resolution systems. At the bottom of the computer is very hot at times so place the laptop on an object that allows good air circulation. This problem occurs intermittently every few weeks or more. I wonder if it is downloading an important upgrade, do a scan of viruses, or by working as a bot. Lights for hours. Currently, I estimate that it has worked rapidly to possible 6 hours. Thank you.

  It will usually be to dissipate internal heat from running resource intensive applications.

  Download and install a temperature/speed control application.

  Open the activity monitor all THE PROCESSES and CPU to display values between high and low.

  When the fan speeds up, post pictures of both for review.

  Also run Apple Hardware Test:

  https://support.Apple.com/en-us/HT201257

  Note that an error free AHT is inconclusive.

  Ciao.

• LEAP and EAP-FAST in the same access point

  Hello...

  We have an infrastructure based on 1142 APs.  Now, they have set up an SSID with JUMP as an authentication mechanism.

  The infrastructure is not a wireless LAN controller, access points are configured as standalone APs with SSID configured in each of them.

  The mechanism to authenticate the windows with JUMP positions was a little tricky.  We need now to migrate all stations to EAP-FAST, but without loss of JUMP environment during the migration.   You have to configure the APs to serve the two authentication mechanism: LEAP and EAP-FAST.

  Is it possible to have it?

  What should we do about it?

  Thanks in advance...

  For autonomous APs. If you are using:

  Authentication open EAP protocol

  Network EAP-

  It accepts virtually all EAP types, not depends on the radius server to have all active... for example EAP methods, if you are using ACS may the PEAP LEAP EAP-FAST, EAP - TLS at the sametime...

  So no matter what, the customer's server and the RADIUS wireless must match the EAP type configured... any type of EAP, the AP should support it...

• Windows media player, playing at a fast pace HELP!

  I hope someone can help me. I use mozilla and internet explore and have problems with my videos to play in school. They play at an extremely fast pace where I can not even see or read. I have a laptop that is only a year and this is the version of windows 7. I tried mozilla to see if it was internet Explorer but it happens with mozilla as well. At this point, I'm desperate because none of my other classmates have problems with the videos play for them at home for our school courses. Thank you, Gretchen

  Hello

  1. when exactly this problem? It's playback of videos videos online or play in Windows Media Player?
  2. are you able to read other than school videos playing videos normally?
  3. did you of recent changes on the computer before this problem?
  I suggest to run the troubleshooter and check if that helps.
   
  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/is-is/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
  You can check the links for more information.
  The video problems when you use Internet Explorer:
  http://support.Microsoft.com/kb/2532294
  Play an audio or video file: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/play-an-audio-or-video-file-frequently-asked-questions
  I hope this information helps!

• My podcasts play at a faster pace.  How can I fix it?

  Yesterday, I noticed that all my downloaded podcasts were playing at a faster pace.  It looks like all the speakers are hyped up on caffeine (or something).  It is not a subtle level, and it is very distracting.  Is there a fix to reconmend?  I can't find a way to reinstall it.  I use the iPhone running podcast app.

  Podcasts on iOS has a speed at the bottom button. Tap that, until he says "1 x speed"

• EAP-FAST + new user without certificate

  Hello classmates

  can Yyou you please share a situation with me?

  I ISE 2.0 with certificate based authentication using EAP-FAST. When a new user who never logged on the machine, try to connect... the user certificate does not exist and anyconnect found no valid certificate... and that's my problem.

  I have to allow this user to connect on my PKI and run the GPO update to download the certificate.  is it possible to impllement without any certificate eap-fast authentication? example:-anonymous certificate or self-signed certificate?

  Thank you

  Hello!

  So what you see here is the expected behavior. Your machine is not allowed on the network until it has the appropriate certificates, but you can't get the appropriate certificates until you connect to the network :)

  So, what are your options here:

  1 use the mode of low Impact instead of the closed mode. This allows you to define a pre authorization ACL that grants limited access to new machines so that they can enter all necessary GPO, certificates, etc..

  2. you can configure a rule based only on the computer certificate that allows limited access that will allow the user certificate to be issued. After that, a certificate of authenticity can be started and the user will then authenticate using both the user machine identification information +.

  I hope this helps!

  Thank you for evaluating useful messages!

• EAP-FAST and the MAC with WPA2 on RADIUS authentication Local for 1242AG access point

  Hello

  Does anyone has a Setup for this combination work?

  Concerning

  VP

  Hi EAP - FAST didn't need any cert... We must generate CAP... Here is the link... that gives the comparison between different EAP

  http://ciscosystems.com/en/us/prod/collateral/wireless/ps5679/ps5861/prod_qas09186a00802030dc_ps4555_Products_Q_and_A_Item.html

  Here is the link to generate or use the CAP

  http://www.Cisco.com/en/us/docs/wireless/access_point/12.3_8_JA/configuration/guide/s38local.html#wp1050270

  Let me know if that helps...

  Concerning

  Surendra

• For EAP-FAST (inner EAP - TLS) authorization rule

  We have a deployment of ISE, where we seek to use EAP-FAST as our method of inner EAP - TLS authentication method. We check the computer and user certificate. We initially had the following condition in our AuthZ-> EapChainingResult = user and also successful machine rule, but we found that initially succeeded machine and the user fails after windows logon. If we change the condition of EapTunnelType = EAPFAST, then it works fine, logs show that although that initially user fails and machine is successful, after the windows shell login then log message has managed the user and the machine is visible. My preference would be to work with the first requirement, because it is a more valid check but it does not work due to the initial failure, anyone got the EAP-FAST (EAP - TLS) work.

  Concerning

  I have executed him at a client, and you've discovered only machine auth succeeded initially, it's because the user to store where the certificate of users is not open until they have logged ind, this does not work as expected.

  What you can do is to have two different authz, one for eapchainingresult = rules machine succeeded and the user has failed and another when both are successful. This way you can give a granular access by using another for the machine, so the machine does not receive full access to the network before a user is connected.

• Support for EAP-FAST on Ironet 802.11A/B/G adapter

  Cisco Aironet 802.11A/B/G Wireless Cardbus Adapter such as the lack of AIR-CB21AG-E-K9 supports EAP-FAST. This support happens?

  Hello

  EAP-FAST of WPA and 802. 1 x EAP-FAST is already working before the release of ADU v2.1.0.2

• EAP-FAST EAP and PEAP authentication configuration

  Hello world

  I'm pretty well EAP works, however with the help of LEAP
  When I get to PEAP and EAP-FAST, I can't make it work

  What am I missing, I don't know that EAP-FAST and PEAP require certificates. However, how to configure their client side?
  Hope you guys can help me on this point, stuck on this part xD

  First of all I would make that PEAP or FAST is configured correctly. Debugs them when test pay close attention to the newspapers on the WLC or do what is necessary to solve the problems.

  Good read on local eap...
  http://www.Cisco.com/c/en/us/TD/docs/wireless/controller/7-4/configurati...

  To set up your client I'll assume it windows 7 or newer?

  https://supportforums.Cisco.com/document/68096/PEAP-authentication-confi...

• On the NI PCI-6221 fast sampling rate question

  Hi I was wondering if someone can answer a question of sampling rate on this card to PCI-6221 (http://sine.ni.com/nips/cds/view/p/lang/en/nid/14132).

  Especially if I wanted to transmit simultaneously (analog output) and data acquisition (analog input), what is the sample rate max I could use. Kind regards.

  Since the 6221 is multiplexing the analog input, your question for I / simultaneous ao is possible for one channel of the only. If your "simlutaneously" can include delays (e.g., 100us), you may be able to work with several AI channels as well...

  HAVE the multiplexes, workable sample rate given that the total sample (250 kHz) frequency divided by the number of channels that you use. AO is faster than HAVE it, so it does not reduce this number.

  hope this helps,

  Norbert

• fast sampling rate question...

  Hello

  I use USB-6009 and max sampling rate is about 48 K samples/s according to

  the specification...

  Question 1.

  48 K samples/s means... only when you receive 1 analog input?

  If I have 2 analog inputs then forge would be just half of the 48K?

  Question 2.

  using the daq assistant.

  I would like to get about 50 samples between 10ms

  If I do the math I get 5 K samples/s, which is enough for me

  However, I played with samples to read and throughout the day, the sampling rate,

  do not get this rate... (I'm outputing in file with LVM)

  I searched on the sampling frequency, and people here said

  samples read and sample rate do not havea correlation...

  but I see clearly that they are relevant. When I change a setting

  I get a different number of acquisition... I do N smaples.

  Please help:)

  Q1. Yes, except that the switching of channels takes awhile so the net price per channel is slightly less than half the rate of single channel.  The USB-6009 specification document does not indicate what is the switching time.  You should be able to get 5 kHz on both channels.  20 kHz might be close to the upper limit, but that's just a guess.

  Q2. The DAQ Assistant is often not the best choice for maximum performance.  I do not have the DAQ Assistant, so I can't be more specific. If you get the data as an array of DBL, rather than dynamic data type, it can be recorded directly, without conversion.  The other thing that can make a big difference is a loop two architecture of producer/consumer.  This allows the acquisition of data and save it to the file to run it at different speeds so that each can be optimized separately.  If you are trying to acquire 50 ms of data at a time and then, he writes to the file, you write to the file twenty times per second.  The first time, the operating system must reallocate some file space or do something else what delays write the file, your timing loop is disrupted.

  Lynn

• TMS Provisioning question

  Hello

  My TMS version is 13.2, new facility.

  I tried to enable the agent TMS under administration-> configuration-> General-> tms tools enable agents. After all, I do not see any process under the status of the activity.

  "If I connect to VCS, under systems > Navigator, selecting the agent VCS and TMS tab, I see"

  Successfully connected to the TMS agent running on the VCS. "" but there is an error message "

  Unable to connect to the agent running locally on this server MSDS MSDS. »

  Any idea on this issue? Thank you

  Hi Curtis

  Since this is a new installation and you are running 13.2 I recommend you to install the tms extension provisioning. The tmsagent is the old model of provisioning.

  https://supportforums.Cisco.com/thread/2145898

  Follow this thread for the document and download links.

  / Magnus

  Sent by Cisco Support technique iPhone App