To access the email (Inbox) via web interface
Hi all.I'm testing the functionality of Oracle beehive.
I installed the hive 1.4.3.0 + beekeeper 1.4.3.0 on windows 2003. Is it possible for a user to access email, address book, etc. via the web page as it is in the Zimbra? If yes how can I access it? (url, port).
Concerning
Groxy
Hello
If you had 3 GB or more of RAM of the machine where you installed the server of the hive, the Zimbra web interface would been configured automatically in 1.4.3. It'll be at: http://application-tier server: port/zimbra. Where "Server" is the hive, and the port is probably 7777 if there was nothing else on the machine using this port when you installed.
Richard
Tags: Fusion Middleware
Similar Questions
-
Cannot access the AIP SSM via ASDM
CISCO recommendations below:
Cannot access the AIP SSM via ASDM
Problem:
This error message appears on the GUI.
Error connecting to sensor. Error Loading Sensor error
Solution:
Make sure that the IPS SSM management interface is up/down and check his IP address configured, default gateway and the subnet mask. It is the interface to access the software from Cisco Adaptive Security Device Manager (ASDM) on the local computer. Try to ping the address of management of IPS SSM IP interface on the local computer that you want to access the ASDM. If it is impossible to do a ping check the ACLs on the sensor
----------------------------------------------------------------------------------------------------------------------------------------------
I've tried everything recommended above. I can ping the host ASDM the FW and the SSM-10 module. Well, I ping the host machine and the SSM of the ASDM. I opened as wide as possible ACL. I changed the IP addresses and masks several times. The management of the ASA port and the SSM and the PC are on the same subnet.
A trace of package from the PC to the SSM shows that it is blocked by an ACL rule, and yet I opened wide. I've seen this kind of problem before and it was solved by applying the double static NAT, but I don't know how to do that if all the IP addresses are on the same subnet.
Tried everything, need help from high level.
The IDM software that comes with ASDM does not support java 1.7. The portion of the ASDM ASA supports 1.7 but launch the IPS cmdlet works only with 1.6. The TAC enginner suggested that I use the IME (IPS Manager Express) which is available for free on the Cisco's (http://www.cisco.com/en/US/products/ps9610/tsd_products_support_general_information.html) Web site.
I've been playing with it today, and so far it seems to work pretty well.
-
Cannot access the Media folder via App IOS Readycloud
I have a RN204 4.6.2 running in an OSX system which will not allow access to the Media folder via the IOS app on iPhone or iPad. I can access the media folder via the ReadyCloud portal or the finder on MAC without problem, but the IOS App shows "Access Denied" and requests user & password, which, when entered, does not. I can access all other folders via the application, just not the media folder. Permissions are set the same as the other issues so I'm not sure what the question is that if she's Readycloud app for IOS. I guess the user & password requested is for NAS, although I tried the credientals of Readycloud just for fun but no help. As a note, I don't get "Connection failed" but "Access Denied", so the network access is OK but access to the file is doesn't understand why all other folders are accessible but not the media folder. And that's on both VPN connections & local. Any ideas?
OK, get it fixed. I have changed the name of the folder, allowed full access, then he changed the name of moose. Now I can access the folder via the ios app. I'll have to rescan the actions in my media streamer, but to the East, I now access app.
-
My old MSN e-mail account was hacked and blocked. I created a new hotmail account. How can I access the emails and blocked my old account contact information? Thanks for any help!
original title: hacked E-mailHi BigByrd,
I'm afraid it's almost impossible to access the old MSN your Hotmail account is newly created account.See you soon ~ -
How to access messages remotely or via web?
How can I access e-mail remotely or via web. All I know is that you can't do through iCloud. (With the help of Macbook 10.11). Thank you.
You can if you use email to iCloud. If you do not, then you will need to access it from the web site of your email provider, for example, Google, Comcast.
-
Customer remote cannot access the server LAN via VPN
Hi friends,
I'm a new palyer in ASA.
My business is small. We need to the LAN via VPN remote client access server.
I have an ASA5510 with version 7.0. I have configured remote access VPN and it can establish the tunnel with success. But I can not access the server.
Client VPN is 5.0.07.0290 version. Encrypted packages have increased but the decrypted packet is 0 in the VPN client statistics, after I connected successfully.
Next to the ASA, I show crypto ipsec sa, just deciphering the packets increase.
Who can help me?
Thank you very much.
The following configuration:
ASA Version 7.0(7)
!
hostname VPNhost
names
dns-guard
!
interface Ethernet0/0
nameif outside
security-level 10
ip address 221.122.96.51 255.255.255.240
!
interface Ethernet0/1
nameif inside
security-level 100
ip address 192.168.42.199 255.255.255.0
!
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
shutdown
no nameif
no security-level
no ip address
management-only
!
ftp mode passive
dns domain-lookup inside
access-list PAT_acl extended permit ip 192.168.42.0 255.255.255.0 any
access-list allow_PING extended permit icmp any any inactive
access-list Internet extended permit ip host 221.122.96.51 any inactive
access-list VPN extended permit ip 192.168.42.0 255.255.255.0 192.168.43.0 255.255.255.0
access-list VPN extended permit ip 192.168.43.0 255.255.255.0 192.168.42.0 255.255.255.0
access-list CAPTURE extended permit ip host 192.168.43.10 host 192.168.42.251
access-list CAPTURE extended permit ip host 192.168.42.251 host 192.168.43.10
pager lines 24
mtu outside 1500
mtu inside 1500
ip local pool testpool 192.168.43.10-192.168.43.20arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list VPN
nat (inside) 1 access-list PAT_acl
route outside 0.0.0.0 0.0.0.0 221.122.96.49 10
username testuser password 123
aaa authentication ssh console LOCAL
aaa local authentication attempts max-fail 3no sysopt connection permit-ipsec
crypto ipsec transform-set FirstSet esp-des esp-md5-hmac
crypto dynamic-map dyn1 1 set transform-set FirstSet
crypto dynamic-map dyn1 1 set reverse-route
crypto map mymap 1 ipsec-isakmp dynamic dyn1
crypto map mymap interface outside
isakmp enable outside
isakmp policy 1 authentication pre-share
isakmp policy 1 encryption des
isakmp policy 1 hash md5
isakmp policy 1 group 2
isakmp policy 1 lifetime 86400
isakmp nat-traversal 3600
tunnel-group testgroup type ipsec-ra
tunnel-group testgroup general-attributes
address-pool testpool
tunnel-group testgroup ipsec-attributes
pre-shared-key *
telnet timeout 5ssh timeout 10
console timeout 0: end
Topology as follows:
Hello
Configure the split for the VPN tunneling.
Create the access list that defines the network behind the ASA.
ciscoasa(config)#access-list Split_Tunnel_List remark The corporate network behind the ASA. ciscoasa(config)#access-list Split_Tunnel_List standard permit 10.0.1.0 255.255.255.0
Mode of configuration of group policy for the policy you want to change.
ciscoasa(config)#group-policy hillvalleyvpn attributes ciscoasa(config-group-policy)#
Specify the policy to split tunnel. In this case, the policy is tunnelspecified.
ciscoasa(config-group-policy)#split-tunnel-policy tunnelspecified
Specify the access tunnel split list. In this case, the list is Split_Tunnel_List.
ciscoasa(config-group-policy)#split-tunnel-network-list value Split_Tunnel_List
Type this command:
ciscoasa(config)#tunnel-group hillvalleyvpn general-attributes
Associate the group with the tunnel group policy
ciscoasa(config-tunnel-ipsec)# default-group-policy hillvalleyvpn
Leave the two configuration modes.
ciscoasa(config-group-policy)#exit ciscoasa(config)#exit ciscoasa#
Save configuration to non-volatile RAM (NVRAM) and press enter when you are prompted to specify the name of the source file.
Kind regards
Abhishek Purohit
CCIE-S-35269 -
Need help to access the internal network via VPN on ASA5505 8.4 (1)
Recently, I upgraded my ASA5055 from 8.02 to 8.4 and since I have updated to the new version I can access my home network is no longer through the VPN. I can connect to the VPN with no problems however I can no longer ping or you connect to my network of 10.0. Someone would be kind enough to look at my config and tell me what needs to be added to make it work? In my old config, I had a statement of NAT for VPN that is no longer here.
I also wanted to configure WebVPN to work as well, and this is something that I've never been able to understand. Is it also possible that I can be on my 20.0 network and connect to the VPN and access 10.0 as well? When it is connected to my network of 20.0 I'm not received credentials to connect to the VPN. I would be grateful if someone can help out me. The major part of this is the first part of this question.
My configuration:
ASA Version 8.4 (1)
!
ASA5505 hostname
domain xxxxxxxx.dyndns.org
enable encrypted password xxxxxxxxxxxx
xxxxxxxxxxxxxxx encrypted passwd
names of
nameserver 192.168.10.2
Office of name 192.168.10.3
name Canon 192.168.10.5
name 192.168.10.6 mvix
name 192.168.10.7 xbox
name 192.168.10.8 dvr
name 192.168.10.9 bluray
name 192.168.10.10 lcd
name 192.168.10.11 mp620
name 192.168.10.12 kayla
name 192.168.1.1 asa5505
name 192.168.1.2 ap1
name 192.168.10.4 mvix2
name 192.168.10.13 lcd2
name 192.168.10.14 dvr2
!
interface Vlan1
nameif management
security-level 100
IP address asa5505 255.255.255.248
management only
!
interface Vlan2
0050.8db6.8287 Mac address
nameif outside
security-level 0
IP address dhcp setroute
!
interface Vlan10
nameif private
security-level 100
IP 192.168.10.1 255.255.255.224
!
interface Vlan20
nameif Public
security-level 100
IP 192.168.20.1 255.255.255.224
!
interface Ethernet0/0
Description pointing to WAN
switchport access vlan 2
!
interface Ethernet0/1
Uplink port Linksys 12 description
switchport access vlan 10
!
interface Ethernet0/2
Description Server 192.168.10.2/27
switchport access vlan 10
!
interface Ethernet0/3
Uplink Eth1 management description
!
interface Ethernet0/4
switchport access vlan 30
!
interface Ethernet0/5
switchport access vlan 30
!
interface Ethernet0/6
switchport access vlan 30
!
interface Ethernet0/7
Description of Cisco 1200 Access Point
switchport trunk allowed vlan 1,10,20
switchport trunk vlan 1 native
switchport mode trunk
!
Banner motd users only, all others must disconnect now!
boot system Disk0: / asa841 - k8.bin
passive FTP mode
clock timezone PST - 8
clock summer-time recurring PDT
DNS server-group DefaultDNS
domain xxxxxxx.dyndns.org
network object obj - 192.168.50.0
192.168.50.0 subnet 255.255.255.0
Server network objects
host 192.168.10.2
network object obj - 192.168.10.0
192.168.10.0 subnet 255.255.255.224
network object obj - 192.168.20.0
subnet 192.168.20.0 255.255.255.224
network server-01 object
host 192.168.10.2
network server-02 object
host 192.168.10.2
xbox network object
Home 192.168.10.7
xbox-01 network object
Home 192.168.10.7
xbox-02 network object
Home 192.168.10.7
xbox-03 network object
Home 192.168.10.7
xbox-04 network object
Home 192.168.10.7
network server-03 object
host 192.168.10.2
network server-04 object
host 192.168.10.2
network server-05 object
host 192.168.10.2
Desktop Network object
host 192.168.10.3
kayla network object
Home 192.168.10.12
Home_VPN_splitTunnelAcl list standard access allowed 192.168.10.0 255.255.255.224
outside_access_in list extended access permit tcp any any eq 3389
outside_access_in list extended access permit tcp any any eq 2325
outside_access_in list extended access permit tcp any eq ftp server object
outside_access_in list extended access permit tcp any any eq 5851
outside_access_in list extended access udp allowed any any eq 5850
outside_access_in list extended access permit tcp any any eq pptp
outside_access_in list extended access udp allowed any any eq syslog
outside_access_in list extended access udp allowed any any eq 88
outside_access_in list extended access udp allowed any any eq 3074
outside_access_in list extended access permit tcp any any eq 3074
outside_access_in list extended access permit tcp any any eq field
outside_access_in list extended access udp allowed any any eq field
outside_access_in list extended access permitted tcp everything any https eq
outside_access_in list extended access permit tcp any eq ssh server object
outside_access_in list extended access permit tcp any any eq 2322
outside_access_in list extended access permit tcp any any eq 5900
outside_access_in list extended access permit icmp any any echo response
outside_access_in list extended access permit icmp any any source-quench
outside_access_in list extended access allow all unreachable icmp
outside_access_in list extended access permit icmp any one time exceed
outside_access_in list extended access udp allowed any any eq 5852
KaileY_splitTunnelAcl list standard access allowed 192.168.10.0 255.255.255.224
pager lines 24
Enable logging
timestamp of the record
exploitation forest-size of the buffer of 36000
logging warnings put in buffered memory
recording of debug trap
asdm of logging of information
address record [email protected] / * /
exploitation forest-address recipient [email protected] / * / level of errors
Management Server host forest
MTU 1500 management
Outside 1500 MTU
MTU 1500 private
MTU 1500 Public
local pool IPPOOL 192.168.50.2 - 192.168.50.10 255.255.255.0 IP mask
local pool VPN_POOL 192.168.100.2 - 192.168.100.10 255.255.255.0 IP mask
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow all outside
ASDM image disk0: / asdm - 641.bin
don't allow no asdm history
ARP timeout 14400
!
Server network objects
NAT (private, foreign) static tcp ftp 5851 service interface
network object obj - 192.168.10.0
NAT (private, foreign) dynamic interface
network object obj - 192.168.20.0
NAT (outside) dynamic public interface
network server-01 object
NAT (private, outside) interface static 2325 2325 tcp service
network server-02 object
NAT (private, outside) interface static udp syslog syslog service
xbox network object
NAT (private, outside) interface static service udp 88 88
xbox-01 network object
NAT (private, outside) interface static service udp 3074-3074
xbox-02 network object
NAT (private, outside) interface static service tcp 3074-3074
xbox-03 network object
NAT (private, outside) interface static tcp domain domain service
xbox-04 network object
field of the udp NAT (private, foreign) of the static interface function
network server-03 object
NAT (private, outside) interface static tcp https https service
network server-04 object
Static NAT (private, outside) interface service tcp ssh 2322
network server-05 object
NAT (private, outside) interface static 5900 5900 tcp service
Desktop Network object
NAT (private, outside) interface static service tcp 3389 3389
kayla network object
NAT (private, outside) interface static service udp 5852 5852
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
AAA authentication enable LOCAL console
AAA authentication http LOCAL console
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
Enable http server
http 192.168.1.0 255.255.255.248 management
redirect http outside 80
location of SNMP server on the Office floor
SNMP Server contact [email protected] / * /
Community SNMP-server
Server enable SNMP traps snmp authentication linkup, linkdown cold start
No vpn sysopt connection permit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto-map dynamic outside_dyn_map pfs set 20 Group1
Crypto-map dynamic outside_dyn_map 20 set transform-set ESP-3DES-SHA ikev1
life together - the association of security crypto dynamic-map outside_dyn_map 20 28800 seconds
Crypto-map dynamic outside_dyn_map 20 kilobytes of life together - the association of safety 4608000
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 192.168.1.0 255.255.255.248 management
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 30
Console timeout 30
access to administration management
dhcpd dns 24.205.1.14 66.215.64.14
dhcpd ping_timeout 750
dhcpd field xxxxxxxx.dyndns.org
dhcpd outside auto_config
!
dhcpd manage 192.168.1.4 - 192.168.1.5
dhcpd enable management
!
dhcpd address private 192.168.10.20 - 192.168.10.30
enable private dhcpd
!
dhcpd 192.168.20.2 public address - 192.168.20.30
dhcpd enable Public
!
a basic threat threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Server NTP 192.43.244.18
Server NTP 129.6.15.28
WebVPN
internal Home_VPN group strategy
attributes of Group Policy Home_VPN
value of 8.8.8.8 DNS Server 4.2.2.2
Ikev1 VPN-tunnel-Protocol without ssl-client
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list Home_VPN_splitTunnelAcl
value by default-field www.xxxxxx.com
the address value IPPOOL pools
WebVPN
the value of the URL - list ClientlessBookmark
political group internal kikou
group attributes political kikou
value of 8.8.8.8 DNS Server 4.2.2.2
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list KaileY_splitTunnelAcl
XXXXXXX.dyndns.org value by default-field
username scottrog encrypted password privilege 0 xxxxxxxxxxxxxx
user_name john encrypted password privilege 0 xxxxxxxxxxxxxxx
username joek encrypted password privilege 0 xxxxxxxxxxxx
eostrike encrypted xxxxxxxxxxxx privilege 15 password username
username almostsi encrypted password privilege 0 xxxxxxxxxxxxxx
username ezdelarosa password xxxxxxxxxxxxxxencrypted privilege 0
type tunnel-group Home_VPN remote access
attributes global-tunnel-group Home_VPN
IPPOOL address pool
LOCAL authority-server-group
authorization-server-group (outside LOCAL)
Group Policy - by default-Home_VPN
authorization required
IPSec-attributes tunnel-group Home_VPN
IKEv1 pre-shared-key *.
type tunnel-group SSLClientProfile remote access
tunnel-group SSLClientProfile webvpn-attributes
enable SSLVPNClient group-alias
tunnel-group type ClientLESS remote access
tunnel-group kanazoé type remote access
attributes global-tunnel-group kanazoé
address VPN_POOL pool
by default-group-policy kikou
tunnel-group KaileY ipsec-attributes
IKEv1 pre-shared-key *.
by default-group Home_VPN tunnel-Group-map
!
!
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:438ed6084bb3dc956574b1ce83f52b86
: end
ASA5505 #.
Here are the declarations of NAT for your first question:
network object obj - 192.168.100.0
255.255.255.0 subnet 192.168.100.0
NAT (private, foreign) source static obj - 192.168.10.0 obj - 192.168.10.0 destination static obj - 192.168.50.0 obj - 192.168.50.0
NAT (private, foreign) source static obj - 192.168.10.0 obj - 192.168.10.0 destination static obj - 192.168.100.0 obj - 192.168.100.0
And 'clear xlate' after the above and that should fix your first question.
I would check your second question and get back to you shortly.
-
To access the virtual machines via browser
Hello
We can access virtual machine running on ESXI 5.0 U1 via Web browser?
Kind regards
Vikram Kumar. P
You'll want to download and install the vSphere Client integration Plugin for your browser (Internet Explorer or Mozilla Firefox).
More information can be found here:
-----------------------------------------
Don't forget to mark this "correct" answer or 'useful', if you found it useful (you'll also points).
Kind regards
Harley stagnate
VCP3/4, VCAP-DCD4/5, VCDX3/4/5
Website: http://www.harleystagner.com
Twitter: hstagner
-
To access the ESXi 6 via the webclient service
Greetings,
I'm sorry if I'm just cutting on it, but maybe it's an easy question to answer.
I'm in a very locked down environment and I can not access vSphere windows client (client installation is not allowed on my windows desktop).
I have 5 hosts ESXi 6.0 and I need to deploy vSphere 6 on top of these hosts. My plan was to go directly to one of the hosts and install vCenter on a virtual machine on that host.
From this point, I would be able to connect to vCenter and build the rest of the environment.
As I don't have access to the Windows client, I have to use the web client to interact with the environment (I would need to connect the host to the first and build vCenter), but given that I have not vCenter or the webclient service installed yet, I see not a way to actually enter the ESXi host using the webclient service. I know with 5.5, was the order for the installation:
1.) SSO
2 web client).
3. inventory service)
4.) vCenter Server
But what I would do here with version 6? Can I run the installer of vCenter and install the web client on my desktop and then use it to access the host to create the environment?
It seems that the windows client really is a must if you want to connect to a host (if you don't have the webclient service installed). Is this fair?
There is no webclient for administrering a stand-alone ESXi host, only the Windows client.
However the vCenter device built in deployment tool to deploy a vcenter device you don't need customer C sharp, but you must be able to install the plugin for integration of customer.
If you need a Windows vCenter server you need to deploy the fashion old way
-
Cannot access the virtual center with web access
Hello
I can access my ESX hosts without problem using web access but I can't access the virtual Center.
I put https://hostnamevCenter
I go as far as the home page and once I click on web access connection I get the following error:
'503 service unavailable '.
Any suggestions? Is web access configured automatically for vCenter or what I need to do something more?
Thanks in advance
Hello
If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!
Prakash
-
Adding user to access the Service Console via Putty
Hi guys
I'm quite new to the world of Vmware, so please exuse me if I look trivial.
Basically, I want to create a user in order to access the service through PuTTY console.
I tried with the root , but it says access denied. I have read the forums and I know that I need to create a new user, and then get to KNOW, but could you please tell me how and where I can create this user as I can only find Permissions tab for ESX1 (our esx server). What I need to for this to the service console physially enter the sever room or can I create this user using one of my domain accounts for VIC 2.5
If I can do or could you please guide me further
Also is it possible to use the service of the VIC, if so how.
I would be very grateful if you could give me an answer for what I send the vizionsupport logs from the console using some of the linux (vmware controls), I think that I can do that by logging in on the ESX Server service console.
Concerning
Rucky
To add a newuser you would do the following in the console of the ESX host.
useradd username (where username is the name of the user account)
passwd username (This will prompt you for the password for the user)
Now this user must be able to connect via SSH
You can then run su - (you will be prompted for the root password) that will put you in a root shell
Also, you could edit/etc/ssh/sshd_config (using vi or nano)
and change the following line
Of
PermitRootLogin not
TO
PermitRootLogin Yes
type of service sshd restart (you should do this in the console) this will then allow you to ssh to the system as root.
-
To access the other account via external hard drive
MacBook Pro (13 inch, early 2011)
V.10.11.6 El Capitan (15G 31)
To summarize what I've lived, I got a kernel panic, by connecting to any account. So I tried to fix it by zapping the PRAM and NVRAM, tried the reset SMC, and both did not work. So I installed El Capitan on my external hard drive and it works, I just need to access the other account on the Mac to recover photos and then do a clean set install.
The problem is that I do not know how to access the other account on the mac like I did not move any info from another acc to my external hard drive. Is it possible to do more than to reconfigure my HD post and return to the new installation procedure? Or I'm able to get pictures on the other account with the photo software?
Open the drive containing, then the folder users, your record of departure, and photos. If you encounter a file that you don't have access permission, either drag it to the office supply your administrator password, or select the entire disk, choose get the information in the file menu and set to ignore permissions or ownership.
(143739)
-
Hi, I really need to reset the PW on my Gamertag * Lathyrus TSG * who was on my original Xbox. My Original Xbox died a few years back and recently I bought a new Xbox. I download on my new Xbox. The Email attached to my Gamertag is dead, it was my email former Internet service provider and they changed Roadrunner/Comcast to Time Warner Cable. I have the old ID Xbox and Xbox novelty and serial numbers as well as the former flow used to pay for Xbox Live Gold card. I tried several times to use the form help to reset my PW but a Xbox Live rep believes that I can't meet the minimum percentage of correct information to get a link sent. I would really like this old Gamertag back.
Hello
Check out the following link to reset the password for Xbox LIVE and check if that helps.
http://support.Xbox.com/en-in/billing-and-subscriptions/account-management/manage-Live-ID
If the problem persists then, post your question on support Xbox forums about the issue.
-
GET A WINDOWS BOX POP BEFORE I CAN ACCESS THE EMAILS
I get a pop up box where I have to click Yes or no each time before I get the emails. I tried a few things mentioned on the forum to get rid of, but none have worked. Someone at - it any other ideas I can try to remove it?
Hello
You need to post this question here: http://answers.microsoft.com/en-us/windowslive/forum/livemail-email?tab=all&tm=1368891875912
Thank you.
-
To access the JMX values via JRockit Mission Control
Hello
We try to solve certain problems of JDBC that we have with 10.3 and I thought we could access the mbeans of JRockit Mission control to trigger alerts but I can't seem to find the WebLogic server mbeans in the console. Am I missing something?
Any help would be greatly appreciated.
-BrettWell, have you tried this JVM option as described in the message?
-Djavax.management.builder.initial = weblogic.management.jmx.mbeanserver.WLSMBeanServerBuilderIf you have an Oracle support contract, I would file a case of pension at this point. You are very close, just need someone to help you at the finish line. Good luck.
Maybe you are looking for
-
Any way to display all the inboxes?
I was wondering if there was a way to view all mailboxes by default when you open the mail application? My mini iPad 4 always open the mail to the default setting of iCloud for a reason, and I have to press once or twice to access all mailboxes.
-
How can I restore PC to factory settings
Separated from this thread. How to restore my pc to factory settings
-
Oracle Service Bus - how to create binary attachments?
HelloI develop a Proxy service for retrieving binary data (of a BLOB in the database), and this must be sent in MIME attachment to anyXML service.Currently, I am assigning the data to $attachments / ctx:attachment / ctx:body - after using a legend Ja
-
Power system icon is gray turned off in Windows 8
I have Windows 8. But the notification of the power icon does not appear in the taskbar. I ' tried to fix it in the notification thus in the system icon portions but I can't because the possibility to activate the icon is grayed out offshore and does
-
Way to the commands per second using PowerCLI
You can use powerCLI for average orders per second of a virtual machine on a historical period in the same way, as you can with cpu.usagemhz.average?