To access the virtual machines via browser

Similar Questions

• is it possible to access the virtual machine when the network is down...

  Hello. He... IAM wondering is it possible that we can access the virtual machine when the network is down... (Because of power outages or when the fluctuations...) ................?

  Is it possible that I can configure my Virtual Machine...?

  Thank you and best regards...

  Indianmale...

  Hello

  Not really...

  For an environment hosted... If you can access the console of the host, you can always access the console of the virtual machine regardless of the State of the network outside of the console. VMware Workstation, Fusion and server all fall into this category.

  For ESXi/ESX... you need a host outside to access the console of the virtual machine. ESX and ESXi not displayed graphics or VMs of their consoles and management devices. So, you need an external machine that can run the vSphere Client or access to the virtual machine via RDP, VNC according to Guest OS involved or SSH.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009, Analyst of DABCC
  ====
  Author of the books ' VMware vSphere (TM) and Virtual Infrastructure Security: ESX security and virtual environment ' available for pre-order now
  "VMWare ESX in the Enterprise Server: planning and securing virtualization servers, Copyright 2008 Pearson Education."
  SearchVMware Pro| Blue gears. Top virtualization security links| Security Round Table Podcast virtualization

• How to access the virtual machines to different physical network?

  Hello

  I'm new to ESXi, can someone tell me how can I access virtual machines on the physical network existing in case I use different IP classes? Physics of the network by using the class C IPs and I assigned IPs to virtual machines of class A? If it is possible, then, what are the steps?

  In fact, I installed exchange 2010 VMs and also want to access the email accounts of physical network.

  Thank you.

  vmjunki wrote:

  You mean there's no way in ESXi to configure the way so we can access the virtual machines to physical network? without third-party applications.

  Because it is impossible for the various networks IP connect without a router, you must have such a device. There is really no difference in that in a pure virtual or physical environment.

  You might think the ESXi host as a box with one or more servers (virtual) inside and one or more layer (virtual) two switches, just like a small server room. This means you will need to provide the same type of connectivity that you would have to a new server room with machines configured with addresses in a different IP network range.

• Unable to connect to the virtual machine via telnet

  Hi all

  The VM on Vcenter everything is perfect with the network connection. I can't do a ping of the virtual machine remotely but I can not connect via telnet.

  For the same reason? And even more, I have disabled the fiewalls of the virtual machine (Windows 2008 R2).

  The error that says: could not open connection to the host, on port 23: Connect failed

  Can you please let me know how to solve this problem?

  Since there is nothing blocking the traffic of the virtual machine in ESXi, you can begin troubleshooting in the guest OS. For example is running telnet server and configured to accept connections?

  André

• expose the virtual machine via home router

  Hello

  I have my router configured to allow access to a virtual machine running Ubuntu 64 bit headless. The router allows port 80 to pass to the virtual machine. I was able to access the machine's web server once and then I get an error saying that the connection has expired. Determine, I can connect to the Web server on the computer virtual machine host through the LAN IP. I tried bridged and NAT.

  When debugging this issue, I changed the configuration of the router to allow access to port 80 on the host computer. This succeeded and I see VM host machine from outside my local network.

  I looked around your site and google, but I can't use the correct search terms. Can you point me to the documentation for it or let me know how do ?

  Thank you

  -Rob

  If you use the NAT, the virtual machine is originally a host-level NAT address (172.x.y.z) that your Internet router knows nothing.  You can forward port 80 on the router IP of your host, and then configure/Library/Application Support / VMware Fusion/vmnet8/nat.conf port 80 requests for port forward to address 172 of your VM on port 80.  Need to turn off Apache on OS X, if it works because it would cause a port conflict.

  Your other option is to change the VM from NAT filled, in which case your OS X and your Ubuntu VM would be on the same subnet with a DHCP address, given by the Internet router.  The router might forward traffic directly to the virtual machine without any additional port forwarding.

• To access the virtual machines of two different hosts

  Greetings,

  I have a question that I can't find the answer to. I am setting up a virtual machine environment small and need to better understand the architecture behind it.

  2 host servers

  1 iSCSI Equallogic San (target)

  I have installed 35i ESX and runnning on two physical hosts. .205 et.206

  I created a data store on my SAN to host my 'model' VM.

  De.205, I can see the data on the SAN network store and browse the virtual machine I (using VMConverter) moved there.

  De.206, I can see the data store on the SAN, but when I sail, I do not see the same information. I see no. VM.

  MY understanding is that using the SAN to store the virtual machine and that I would make the hosts of this data store to run the virtual machine. But the way in which it seems that I have the virtual machine configured on both hosts, always pointing the data store on the San but again using converter, copy de.205 vers.206.

  What don't understand me or that I don't understand.

  Your help is appreciated.

  Welcome to the VMware community forums.   If you have configured things Ok, you will be able to browse the data from these two hosts store and see the same content.  You can register the virtual computers on both hosts.  For an existing VM on the host from 1, you find the data on the host of the 2nd store, right-click on the VMX file and select Add to the inventory.  Have you thought to vcenter server?  It's going to do it is a lot easier.

• When you access the virtual machine, getting the error "encountered an error when you try to use one of its virtual hard disks". Help?

  I received the "low disk space error" on a hard drive of the virtual machine dynamic expanding. I have increased my space of virtual hard disk using "My Computer" > manage > storage > "Disk management" and choose "Attach VHD" then resizing to max available (64 GB), and now I can not start the virtual machine. It gives the error: encountered an error when you try to use one of its virtual hard disks. Help?

  Hi NatalieFoster,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 Virtual PC and XP Mode TechNet Forums

• VMware networking help - network bridge / to access the virtual machines form other pc

  I have a computer 'server' that had 4 VM launched on it.

  I need to connect to these virtual machines, all of which have their own IP addresses. I can ping the server or the host of a remote computer, but must be able to communicate with the virtual machines in the remote/client computerss.

  Can anyone offer insight?  I tried to set up an automatic bypass at one of the virtual machines

  Any thoughts?

  Sorry, I'm not sure I can follow you. In any case, what you're trying to do is to configure adaper network of the virtual machine as "Bridged" within the parameters of the virtual machine and then change network card settings in as guest OS:

  IP address: 192.168.1.21 (where 21 must be an unused IP address currently)
  Subnet mask: 255.255.255.0
  Def gateway: 192.168.1.1

  Preferred DNS server: 192.168.1.1

  André

• Password is now required to access the virtual machines

  I ran Money 98 on my laptop working for the last 2 years (in fact since 1998 on other computers) and from 07/10/2014 when I try to open Money 98 Windows asks for a password. I have not configured this virtual machine, and I do not think that a password has been set up. I really need access to this program, 16 years of financial info desperately needed for the work. Help please.

  Hello

  Would you repost with kindness that your Question in Forum money Microsoft for assistance with money issues:

  https://social.Microsoft.com/forums/en-us/home?Forum=money

  See you soon.

• Cannot access the Virtual Machine

  XPMUser asked the password and I never had any! Don't start xp mode. Help, please!

  Sort problem.

  Hi Lempriere,

   

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itprovirt

   

  Hope this information helps.

• Clone the virtual machine between two ESX 3.5.0 servers (low connection)

  Hi all!

  I have two ESX 3.5.0 servers that are managed by a vCenter servers one have just the connection of 32 KB.

  I need to clone one of my virtual machines from one to the other ESX is W2k8 created with 40 GB HARD drive. I tried to start it clone trough my low connection, but the task is about 86% for 4 days :|

  Is it possible to clone virtualmachine on one of my ESX for its local storage and after that, get it by vCenter for example an external HARD drive and then copy them all to my second ESX? How to run copied virtual machine on my second ESX? Maybe I can do it with another way - ideas?

  Two ESX are the same versions and machines, only the names and the ip addresses are different.

  Thanks for the tips

  Kris

  I don't think it is possible since the virtual disk will be 40 GB in size - I was suggesting using a laptop as a server NFS ESX sees and access the virtual machine for this storage clone - it take the first vessel of ESX host it to secondary site attach NFS datastore on the second ESX Server and using the browser of data store you navigate to the cloned VMX of VM file and to him the second ESX host - you can cold migrate leaving the second host and then move the cursor above for the storage you want.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Cannot save the virtual machine in VMWare Server 2

  Hi all:

  I created a VM (12.1 OpenSuSE 32bits) in VMWare Workstation 7; then I copied it to a host VMWare Server 2.

  When I try to save the virtual machine via the web, the server fails (or at least interrupts the response from Web page), so I tried to save it via command line.

  After searching a bit I found this:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1006160

  The question is now that I can't find any vmware-cmd anywhere, and when I run vmware-vim-cmd I get the following error:

  vmh2: / data/vmachines/postgresql-box # vim - vmware - cmd solo/registervm /data/vmines/postgresql-box/postgresql-box.vmx
  Connection failed: vim.fault.NoPermission

  So I'm stuck... someone can help me?

  BTW: what is ESX, ESXi and what version of ESXi is included in VMWare Server 2?

  Thank you very much

  Luis

  I can't tell you exactly what are the causes of the problem. What I would try (a solution) is to create a new virtual machine in VMware Server with the same specifications as the original one, then copy the two files hard in the new virtual machine folder and edit the .vmx file for the new VM 'OpenSuSE - 12.1 - cl1 - 000001.vmdk' use as its virtual drive.

  André

• How to create the virtual machine to a virtual machine existed file?

  I have two hard drives on my VMware host. There are virtual machines on a SATA drive, how do I list these files of virtual machines and copy one of them to create a new virtual machine (it can save a lot of my time!). I did this way on VMware server 2.0 because I can see what they were and where they were under Windows. But on vSphere, how can I do? Maybe you guys have other ways to do it?

  Thank you!

  George

  On vSphere, I suggest you use autonomous vConventer instead. It is quite simple and easy to use. Alternatively, you can copy or clone the virtual disk to the virtual machine via the Console (ESX) Service offline

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• Unable to connect to the virtual machine after they are created

  I installed VMware view and connected to my server Vcenter. Composer, I installed the server vcenter and View manager recognizes it.

  I created a virtual Windows Vista machine, is joined to the domain and instant, it.

  I then created a persistent office pool and allowed users to access.  I can see the virtual machine created the VCenter

  However, the view Client cannot access the virtual machine (he can see the office pool) bit tells me that the customer is not available.

  Any ideas on what I missed?

  Go to the desktop the pool in view Administrator resources and check the status, it should say "Ready".  If this is not the one usually means that there is something blocking the port 4001 of the agent on the view connection server.  I got this when deploying a pool on a different subnet and there is a network between the areas of the network firewall.  The Vista firewall can sometimes be reset on the deployed virtual check computer so who has not been reactivated and adjust the GPO if necessary.

• Access to the BlackBerry through the USB port on the virtual machine VMWare

  I have my development environment configuration in VMWare virtual machine, and I have no problems of deployment of BlackBerry applications on a simulator that runs as another virtual machine. The problem starts when I try deploying to the device via the USB port. The address is assigned when the mode of development on the device is not accessible from the VM, but only from my host, who do me any good, since as I said my IDE is in the virtual machine. A way to solve this problem? I can still deploy to the device via wi - fi (which is btw access via different ip - one given by the network) by this can sometimes be slow depending on the strength of the signal, etc, so I prefer to be able to deploy via the USB port.

  Just in case anyone has the same problem, how to activate must, VMWare Player click on the USB icon (to the right) and choose to disconnect from the host. Connecting the USB port at the prompt. Stupid...