To add the address in the user profile

Similar Questions

• The user profile Service error

  I got the error message saying that the operation has failed, I found instructions to fix, but it is the administrator account that is corrupted how can I fix the user accounts?

  Hello jedboston,

  Since you can not log on with the administrator account on the computer, we should see if we can in safe mode and if not proceed from there. Try, follow these steps.

  1. reboot your computer and press F8 multiple times until you see a menu similar screen, if you see the Windows startup screen, then repeat this step
  2. highlight and press enter on Mode safe mode with command prompt. Try to connect to it. If it still does not work, proceed to step17
  3. If you are able to connect, once the command prompt appears, type: net user administrator password / active: Yes (you can specify the password for the administrator account.)
  4. If you get a message "the command completed successfully" and then restart your computer by typing: shutdown - r
  5. start again by pressing F8, but this time choose just the SafeMode.
  6. you will be able to log in as administrator with the password set in step 3
  7 hit (windows logo) + r.
  8. type regedit
  9. once the Registry Editor opens, search for HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
  10. in the left pane, find the one that begins with S-1-5... and ends with. BAK; If you can't find one, go to step 15
  11 right-click and click Rename, and then change it. TO BAK. BK
  12 right-click with the same numbering but without the. BAK and Add. BAK add at the end
  13. right click on the one that you have renamed in BK and clickRename, remove the. BK
  14. Subsequently, you have activated the. BAK to the end of the second entry in the first. That should probably fix your problem.
  15. If you do not find one. BAK then try this: open Explorer Windows for C:\Users\Default\AppData\Local\Application data
  16. If you find an other Application Data below the one you are on, and then delete. Who should probably also solve your problem.
  17. If you can not log in Mode safe mode, restart and press F8 until you see the menu again, and then press enter highlightingRepair your computer
  18 wait for all the Windows files to finish loading, then hitNext when it asks for the language of the keyboard.
  19. try to connect here also, choose your username in the menu drop-down, type the password, then go to step 23
  20. If it still doesn't work, then if you still have your Windows installation CD, put it in, and then restart your computer.
  21. press F12 until you see a menu of boot options, choose boot from CD
  22. the language of the keyboard and then click Next. Find repair your computer for a little below the center-left.
  23. choose Open command prompt and type: net user administrator / Active: Yes password (here again you can specify a password)
  24. close the command prompt and click on restart and go to step 5

  Source: I receive error message: the user profile service has no logon. Unable to load the user profile

• The user profile service has not logon. User profile cannot be loaded.

  This showed on my computor someday on my connection, and I am the administrator. So now I can not change anything on computor or backups or add programs or delete. I did nothing before that happened. Any help would be appreciated. I tried safe mode, but that did not solve the problem. I need a simple solution that I'm not terrible with computors. Thank you Sandy

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

• the user profile service has no log on, unable to load the user profile

  my laptop me disconnected during use and I tried to log back on, but I get this message "user profile service does not have the log on, unable to load the user profile. But it allows me as a guest, but can't let me as an administrator. I'm 100% sure that my password is correct.  How can I fix it.

  Francefreedom

  Hi, THIS IS a TWEAK of REGISTRY AND IS AHEAD if YOUR NOT COMFORTABLE, please do NOT ATTEMPT...

  Boot into safe mode (tap F8 at startup) once your safe mode desktop computer has loaded click on the start button, type regedit hit search bar enter.  Double left click HKEY_LOCAL_MACHINE next double left click scroll down to MICROSOFT SOFTWARE double left click MICROSOFT scroll down to WINDOWS NT double left click WINDOWS NT, scroll the LIST of PROFILES double click PROFILE, LIST within profile, you will see two files of script long as S-1-5-21-32778... will be a script. BAK at the end of the script. Make a right click the file that does not. BAK at the end and click Rename. Then, at the end of script .BA type highlight the. BAK file, and right click on it and click Rename. Delete the. Then, the part of the file BAK, highlight the click again right the file .BA and rename and add K to the .BA while she reads. BAK.   The long without script. BAK in the end will have to be highlighted again on the right pane, you'll see REF COUNTY double-click REF COUNT and you will see a number in a box to make sure that the number is 0 (ZERO) if not change it to ZERO 0, click OK. Then and then double click on STATE and change again once the number 0 (ZERO)... Reboot and close regedit your machine and you will now be able to boot and load the administrator account once more.   Hope this helps

  You can also follow a tutorial step by step at this link
  

  https://www.YouTube.com/watch?v=vEyxD6ZG-JI

  Checkurtech

• The user profile Service has not logon. User profile cannot be loaded. (I am the administrator)

  The above message appears when I try to log in.  He only started past today, for no apparent reason.  I can access a different account on my computer, but that information is stored on my own connection.  The administrator so I cannot get a more far by creating other accounts etc, (which would not have the info I need anyway).  Help... I work from home so it's impossible to get anything done.  Thank you.

  Hello suestev,

  Thanks for posting your question on the Microsoft answers Forum.

  Please see the Microsoft KB article below for assistance with the error:
  KB 947215 - error message when you log on a Windows Vista-based computer by using a temporary profile:
  "The user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  I have included several links that addresses the error message for the user profile cannot be loaded.
  You profile might be corrupted and needs to be recreated.

  You can also check the tutorial to
   http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  Good thread on Technet dealing with corrupted user profiles
  http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity/thread/e806dd5d-6764-463e-B181-e3aaee271231/

  How to fix a corrupted user profile:
  http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  If please reply back and let us know if these articles have helped solve your problem or if you still need help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get the Error Message: "user profile service service has no logon. Unable to load the user profile"after you remove the Windows Vista administrator account

  Original title: deleted Vista ultima. admin identity and admin authorization password for standard users will not work.

  I inadvertently deleted the admin. identity, I think in Vista Ultima. The photo shows still on the identities, but when I try to open the identity I get the following message, "user profile service service has no logon. User profile cannot be loaded. The admin. password does not work in any of the other identities now, so I can't do updates to most of my programs, such as windows. I can't open the control panel to add and change of identity.

  Hi JBRA47,

  You can consult the following Microsoft KB article and check if it helps to solve the problem:

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  http://support.Microsoft.com/kb/947215

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Fix using Microsoft 50446: the user profile service service has no logon. User profile cannot be loaded.

  About Microsoft fix 50446 found here http://support.microsoft.com/kb/947215#letmefixit for the user profile Service error, I have three questions about it:

  1. what exactly does this automated solve this downloadable program change / do?

  2 would you recommend to fix "user profile Service service has no login" or would you recommend that the problem resolved manually?

  3. currently, when I log on my computer's built-in Administrator account using safe mode, I am unable to change any other user account or create a new user account.  I'm unable to connect to is account only administrator of my computer.  If I delete this account, I then will be able to create a new administrator account by using the built-in Administrator account on the computer that is running in safe mode?

  Any help on this is greatly appreciated.  Thank you.

  Mr Wizard is essentially the same as the manual process. If there is a difference, I'm not aware.  Personally, I prefer manual processes that I feel I have more control - but others prefer the automated process, because it is simpler.  The choice is yours and I don't think in the long run it's important.

  Question 3 is more difficult to answer.  As the only administrator account on the system, remove leaves you only with the built-in Administrator account which, currently, is not working as you can not use it even to create another administrator account.  Here, the hope is that the patch will solve the underlying problem and the high administrator account will work as normal once the fix is completed - however, I can't guarantee that will be the case because I've never done this procedure when the problem of account is the only account to administrator on the system.

  It should work, but if it isn't then you will be in the situation where you have no active and functional administrator account (if even the built-in Administrator account does not work as an administrator account - as seems to be the case at the moment, but can change once completed correction - or for some reason any cannot be enabled or accessible) and the only solution to this problem is a clean install.  For this reason I recommend you make a backup completes before attempting this, unless your data will be safe.

  I should add that I'm not sure that you have many choices, because this is pretty much the way to solve this problem and I do not know other solutions that work.

  I hope this helps and that I could be more reasssuring, but that's as far as I know the problem, the fix, the situation, the solution proposed and the potential consequences.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can't create a new user account (Windows 7): the user profile service service has no logon

  I tried to create a new user account, but I get the following error when I try to open a session with him:

  the user profile service service has no logon

  Until I leave than anything more I will add that I activated the hidden administrator account and this is the account I use to create a new standard user account.

  Most of the patches for this issue are due to the fact that delete manually a user account does not remove the registry key that are associated, and you are required to go to the next section of the registry:

  HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\WINDOWS NT\CURRENTVERSION\PROFILELIST

  and delete the key associated with the user account to be deleted.

  This fix IS NOT help, because whenever I try to create a new user, Windows doesn't bother creating a registry key to the new user.  The new user account appears in the account management window.  If I right click ondesktop and select Properties, then the settings , select the Advanced tab and click settingsunder USER PROFILES, the new account appears not here no more.

  It is a huge problem.  I have other people who use this laptop and I don't want to use my login information, or the guest account.  I'm not editing the registry just to make a new account.

  Please tell me there is a fix for this that works.  Windows 7 was not free, and this kind of problem is very frustrating for the premium software.

  Thanks - this is the only tip that help me to find the solution to this problem.

  Two files in the folder C:\Users\Default\AppData\Local\Microsoft\Windows Live could not be copied without administrator privileges.  This caused the connection in the attempt fail for all newly created user accounts.  The files are:

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\Bici1_00.sqm

  and

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm

  I've added the read permission for all users in these two files and retried the logon.  The opening of session proceeded set up initial user and filled perfectly.  Probably, this problem started when I installed Windows Live Messenger which is the only Windows Live application, I installed.

  Other important in your message board was to check the event log which stressed the two files which could not copy.  Otherwise provided in WARNING messages immediately preceded files event log error message indicates that the profile service could not connect.

• Get the error message "failure to log - on, the user profile user profile Service failed to load.

  Original title: I downloaded 17 Win. 7 pro updates Wednesday, June 15

  Since this update was completed, I was unable to get into my computer; It goes through the usual startup routine, then it goes straight to the 'return - sleep' emblem that I usually just click on (when the computer is back to sleep, not a start-up), and the answer I get is "failure to log - on, cannot load user profile user profile Service. I sure as hell don't want to lose all my data with a fresh 7 - Pro disc. Someone at - it ideas? I swear I'll hold all Microsoft Updates for a few months before installing again. I also had problems with updates of March 2015. Thank you; Croft * address email is removed from the privacy * P.S. I use my old X.P. to connect again.

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.

  According to the description, you receive error message "the user profile service has no log on." User profile could not be found.

  I would be grateful, if you can provide us with the following information to help us better understand the question?

  • Did you the latest changes on your system prior to this problem?

  I suggest you follow the advice given by Jayant Narang replied the August 14,2014 from the link given below and check.

  Reference:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/the-user-profile-service-failed-the-log-on-user/77768431-FAEC-4DA8-b2cb-ddd95fb2e97d

  Hope this information is useful. Please let us know if you need help with Windows.

• THE USER PROFILE SERVICE service failed the logon__User profile cannot be loaded

  I read the previous discussions, so what I need is someone who has the patience and the time to walk through Windows 7 Home Premium for Dummies with me.  I have a friend who has updated all my software on Windows 7 and has added many other applications for a handsome sum.  A FRIEND.  I was on my labtop there is only 1 hour returned to connect and I get this message to the CONNECTION SCREEN...

  THE USER PROFILE SERVICE service has no logon.
  User profile cannot be loaded

  I'm on the front screen.  No office, NO option to use a different connection name, no Director... Just my name and my password.  My Blue tutorial button to the left and my red farm option to the right.  I can't do all the things I've read on because I can't get the properties... blah blah.  I know that I delete anything... I could not... I don't know how.  I just need help, restore peace of mind only I get from a busy daily life.

  Peuvent some please help?

  Hello

  This also happened to me in another case. All local users are unable to connect they get this error. For example if I enable comments or create a local user account that is a member of the 'users' group I get this error when you connect using the accounts of the said that has been set with a blank password. However, I was able to use my administrator account to manage my machine. You probabbly deleted your permissions on the "C:\Users" folder or the root of the drive itself. If you have a local account, you can plug this hard drive into a computer with the same OS as slave then add "everyone" group with full control and select inherit permissions from parent. Restart, and then try. I hope this helps. C =

  -Julius P.

  MCP, MCDST

• User cannot connect again PC Windows 7, error "the user profile service has no logon. User profile cannot be loaded.

  Our plant manager just got a new PC and I've set up with Windows 7.  I can log on fine using my user account.  But when it tries to connect, it receives the "the user profile service has no logon. Error could not load the user profile.  It can connect to other computers fine, Windows XP & Windows 7 computers.  It's just that a laptop could not connect to.

  It was a VIP user.  He's my boss of bosses bosses if you know what I mean.  What I can do.  I tried "patches" for the mistake that I found online, but none of them helped.
  Help me!  Please, I beg you!

  I did other tests just now and I seemed to have found a "solution".  Here are the steps:

  1 Add the user to the local Administrators group
  2 log in as a user
  3. close the user session
  4 log in as network administrator / local
  5 remove the user from the Administrators group
  6 log in as user
  7. the success!
  Still do not understand what was going on the devil, but at least I know the work around her now!

• Unable to load the user profile on my laptop Satellite C

  Cannot connect. He repeats to me ' the user profile service has no log on. " User profile cannot be loaded. »

  In my opinion problem described is unwanted Microsoft and has nothing to do with the laptop to the manufacturer, so I think that the responses should be offered by Microsoft.
  An interesting page, you can find here.

  Check it out.

• Failed to load the user profile on my Satellite L840

  I have a Satellite L840 and when I logged on today that it's telling the user profile service service (it says service twice don't know if this is important) failed to connect
  User profile cannot be loaded.

  Can someone tell me how to solve this problem?
  Thank you

  I never had this problem but to check first what Microsoft says about that - please http://support.microsoft.com/kb/947215
  Maybe it will help you.

• The user profile Service failed

  I installed a password on my lap top, but tonight, on the attempt to login, I get the message: user profile Service service has no logon
  User profile cannot be loaded.

  How can I connect to?

  Hi mate

  It seems that Microsoft is known on this problem of Windows and have already released a fix for this problem.

  + Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. User profile cannot be loaded.
  http://support.Microsoft.com/kb/947215/en-us

  Please follow the instructions in this MS. knowledge base article
  It seems that you must change the registry

• cannot get past error - could not connect the user profile service

  My HP desktop computer has windows 7 - I can't get past - error message "user profile service failed to connect ' & 'impossible to load the user profile'!"  By clicking on the ICON that displays windows closes and repeats the error message read... a new user account must be defined the user upwards and copy the previous settings account - but I can't get there.

  Hello

  You can try the following.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the PC.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K