To build the

Similar Questions

• Build the NMAKE error for simulink model

  I spent by the procedure of how create the DLL of simulink models http://digital.ni.com/public.nsf/allkb/D70E74FDA37CD8E486257990000603A0 the and have not been able to successfully build the DLL for my model.

  I installed Visual Studio 2008 and I can see the Relatime Veristand workshop added to matlab. However, I get the below error.

  The system does not have the specified path.
  "NMAKE: fatal error U1077: 'copy': code 0 x ' 1 ' back
  Stop.
   
  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>echo the mark command returned an error of 2
  The mark command returned an error of 2
   
  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>An_error_occurred_during_the_call_to_make
  'An_error_occurred_during_the_call_to_make' is not recognized as an internal or external command
  operable program or batch file.
  # Time real workshop build procedure for model: 'CabinTemp_NI' aborted due to an error.

  Matlabe error window has the explanation, as shown below:

  It seems that the build process could not locate some utilities (e.g. do,
  compiler, linker, etc.). Please check your environment variables path and tool
  are correct. You should be able to run the make command:
  .\CabinTemp_NI.bat
  at an MS-DOS command prompt in the directory:
  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw
  Currently, this method generates the following error message:

  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>set MATLAB = c: \ Program Files (x 86) \MATLAB\R2010bSP1

  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>set MSVCDir = c: Program Files files (x 86) \microsoft visual studio 9.0\VC

  ' D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>"C:\Program files (x 86) \MATLAB\R2010bSP1\rtw\bin\win32\envcheck" INCLUDE "c:\program files (x 86) \microsoft visual studio 9.0\VC\include".

  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>if errorlevel 1 goto vcvars32

  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>set VSINSTALLDIR = c: Program Files files (x 86) \microsoft visual studio 9.0

  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>set VCINSTALLDIR = c: Program Files files (x 86) \microsoft visual studio 9.0\VC

  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>set FrameworkSDKDir = c: Program Files files (x 86) \microsoft visual studio 9.0\SDK\v3.5

  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>call "C:\Program Files (x86)\MATLAB\R2010bSP1\toolbox\rtw\rtw\private\vcvars32_900.bat.
  Definition of conducive using Microsoft Visual Studio 2008
  (If you have another version of Visual Studio or Visual C++ installed and wish
  to use command line tools, run vcvars32.bat to this version.)

  I have the good set compiler but I'm not able to solve this error. I've also attached the text file that contains the log for the build process.

  Can someone help me with this please? where am I wrong or what am I doing wrong?

  Thank you

  Hi Jigar273,

  (1) have you configured MATLAB to use the compiler to MSVC ++ 2008? If not, then just type mex - configure in the MATLAB command window and follow the printed instructions.

  (2) open Windows command prompt and type % NIVERISTAND_ROOT, and then press ENTER. The call to this environment variable returns C:\VeriStand? If this is not the case, then please add this environment with the value of C:\VeriStand variable to your system and restart the PC. To do this, follow the instructions as described in the link: http://support.microsoft.com/kb/310519

• Connecting leads to build the array in a VI script

  Hello

  I'm looking for a way to connect the wires to a knot of "generation table" in a script of VI.

  I have a table of entries that should translate in a table via node 'building the table '. I added successfully to the input terminals for 'building the table' node in a script of VI. However, the program fails when I try to execute a loop to wire all of the entries in the order. The problem is, all the sons of entry to the first element of the' generation '. Snapshot of the code is attached.

  Please suggest me a way to link the different elements at different entrances to the node 'building the table '.

  Thank you.

  Concerning

  HB

  LV12 running at the moment, the fastest to write a small example that so open LV14 and watch your VI.

  

• Application builder cannot build the exe. Error 8 has occurred in AB_EXE.lvclass:Build.vi-> AB_Build.lvclass:Build_from_Wizard.vi

  I bought a new Dell laptop (Windows 10 Pro) and LV 2015 (32-bit) is installed. I copied my project files and tried to build the exe file and received the error 8. After much searching for an answer, I created a minimal test with just a single white vi project and an exe based build spec to reproduce the error with. Whenever I try to build, I get the same error 8:

  An error occurred during the generation of the application. You don't have the appropriate permissions to create the application at the specified location, or the application is in use.

  Invoke the node in AB_Engine_Build_Method_Wrapper.vi-> AB_EXE.lvclass:Build.vi-> AB_Build.lvclass:Build_from_Wizard.vi-> AB_UI_Frmwk_Build.lvclass:Build.vi-> AB_UI_FRAMEWORK.vi-> AB_Item_OnDoProperties.vi-> AB_Item_OnDoProperties.vi.ProxyCaller
  
  Method name: Build: Application

  Error 8 has occurred to AB_EXE.lvclass:Build.vi-> AB_Build.lvclass:Build_from_Wizard.vi

  Possible reasons:

  LabVIEW: File permission error. You do not have the correct permissions for the file.

  I can't quite imagine I could have permissions issues. I of course have full admin on the machine privileges.

  I've seen other messages (like this one) who speak to have Windows Explorer opened the path of construction when it tries to go up and get this error. I made double sure that I don't have ANY Windows Open Windows Explorer, trying to build. There was a mention in one of the positions which perhaps of LabVIEW in current directory is defined in the file generation, but I'm not quite what that means, or why that might happen when there isn't usually prevents me to build on other machines.

  I tried the procedure described in the KB, but no help.

  Interestingly, I have created a virtual machine (Win 10) for a different project and installed LV 2015 32 bits in the virtual machine, and all my applications build very well in the virtual machine. But on OS from my physical machine, I get this error 8 for all construction applications.

  I tried to fix LabVIEW, and also I tried to uninstall reinstall LabVIEW. Nor was the error to go away completely. After the repair, the project has successfully generated once. But subsequent attempts to build fail with the same error.

  See the attached test project and the build log.

  Thank you

  Nathan Scharfe

  CLD

  My best guess is that some external process is the use of the folder and do not let you write here. The most likely candidates are anti-virus software or a service of indexation of a certain type. I'm guessing that he sometimes managed everything simply because it is a race condition and in these cases, the blocking part yet or is already done.

  You could try the building to a network drive, when these forces are less likely to be able to make the lock or you could try to find a software that shows you what software has handles opened in a folder and control for an offender. I seem to remember that the Process Explorer and SIW show this, but it's far from my area of expertise.

• "Value is invalid or out of range" when you build the project in CVI 2009

  I converted a project to the wire of the CVI 9.0.1 to CVI 2009, and whenever I try to compile the distribution I get immediately the error message "Value is invalid or out of range" and stop the construction.  This error message is not too terribly useful to determine what the problem is, and I don't see anything obviously wrong with the signs of 'change the Installer '.  Any idea what's going on?  Thank you.

  Well, I'm a little confused by what I see. The newspaper confirms my suspicions earlier that one of the values of timer progress cached version is cause of an error. However, the values in the file "TriboScan OFFLINE.cds" you posted appear very well and do not cause an error when I copy in .cds another simple distribution (since I do not have the files to test your actual building distribution). Are you sure that you build the 'TriboScan OFFLINE.cds' distribution? In any case, I recommend a little offending the .cds hand editing. Save first (just in case), open it in a text editor and delete everything between and (that should be all down). This should solve your problem.

  Let me know what you find.

  A. Mert

  National Instruments

• Build the name of guard of the table of the last element, but not the others. Workaround solution?

  Hello

  Sorry if this has been posted before, I did the search first, but can't find anything.

  Problem is that I have two configurations which are identical and must be ordered by a single vi. Given that they are the same, they are configured with the same sets of parameters so I decided to create a cluster of these and then build an array of clusters. In this way I need to use only a thread and if I need a given parameter I can get it easily from here (or so I thought) and also because I need to see if anything changes I can compare a thread instead of each of the parameters.

  The gui has the list of parameters, then in the block diagram I group them appropiately, using "Bundle name" and then each bundle in a table by using "build the table. Problem is when I have the index in the array for the first place of the configuration and usage to unbundle the parameters I need, using "ungroup by name" (although if I use "Unbundle" the same thing happens) and lo and behol, the output names come from the configuration of the second, not the first.

  Here's the curious thing, though, even if the names are all wrong, that the values are correct. I could live with that, but it's more boring it will be another very difficult user to understand the schema more this is just a proof of principle to test with two, eventually there will be eight or more and who's going to get really confusing.

  Is there a way to get around this? Even if it is to change the names after unbundling.

  Check the attached vi to see what I mean.

  I think you forget an important point on the tables.  The only thing that may be different between each element of a table is its value.  The elements in the array must all share the same properties.  This would therefore include the names of the different elements that make up the cluster that is a table element.

  It seems that the last group that builds in the table is the one that defines the names of the items that are in the element of the cluster.  You must give all elements of the array with the same name within the cluster.  Or use a cluster of clusters rather than a table of cluster to create your data structure.

• How can I write time to build the table in just a few seconds?

  Hello world

  I am able to use "elapsed time" to send a time stamp to "build the table" using the output of 'elapsed time to text.  But after 59 seconds, it gives then a minute.  In the excel file, it is as follows:

  0 00:00:59

  0 00:01:00

  0 00:01:01

  I want to continue to 60, 61 seconds and so fourth.  When I try to connect to an another Subvi, it gives me a connection error.  Any help would be greatly appreciated?

  Thank you

  Ferriol

  I guess that's the Express VI, you can use the output of the time elapsed (s) instead of the number of seconds passed.  If you want a string, use the Format String VI, or build an array of DBL to add to the rest of your data.

• Problems with secondary after building the application .exe

  Hi people,

  as I like am a self taught Newbie on LV and TestStand I have some problems with the construction of an exe file.

  I don't know if it is a question of LabVIEW and TestStand, so I posted this question in the two Forums.

  I use the interface simple chart that came with Teststand and added a secondary. TestStand is supposed to open the called VIs dynamically in this secondary.

  I used the code from the tutorial respective http://zone.ni.com/devzone/cda/epd/p/id/6278

  Everything works fine until I build the application. The screws are then open in pop-up windows clean AND in high school, but only the popup version is usable.

  I hope that I am too dumb to find the answer and that there will be a quick solution.

  If you have built the exe in LabVIEW 2009 selected in the configuration of your adapter TestStand and LabVIEW 2009 and your screws have been opened and saved in 2009 LV?

  

• Build the AOSPS (unknown Baseband, flicker and recovery graph)

  Hi people,

  I have changed the AOSPS for awhile for Nexus devices and maintains also a few threads on XDA.

  I have now moved to the Xperia Z3 and started to set up my build environment, as shown here.

  http://developer.sonymobile.com/knowledge-base/open-source/open-devices/aosp-build-instructions/how-...

  I built and after the first start-up, I can not work because of the unknown baseband radio.

  I spent some time on XDA to find answers and followed this http://forum.xda-developers.com/crossdevice-dev/sony/how-to-build-custom-stock-kernel-linaro-t306691... but still baseband unknown.

  I post here because I hope that some of you got the answers.

  Second, the graphics, already during the startup, sparkles around the area of the softbutton. All commits in Git that could help prevent this?

  Finally and above all, get a return to work on the device after the flash of the ROM is also a pain. I took an a CM ROM with recovery included, flashed Gapps boot.img and re-flashed my boot.img so successful but is still just a poor work - around.

  Thanks for your help :-)

  Hi, first of all thanks to increase my status as a rookie to the learner. The learner wants to sum up its experience to build the AOSPS for the Xperia. Since I've already built for Nexus devices for years, I thought that the Xperia cannot be too difficult to build software for.

  1 building AOSPS will not a radio works but find you some codes in Git. I still had questions about wasting time on reboot very probably due to bad binary files (already had it on Nexus also). 5.1 construction will lead to graphic flicker but the 5.0 building, which still uses the core 3,4, doesn't have this problem. There is no way to get the camera work, so it was a reason for abandoning the Nexus for the Xperia devices. So I started building CM.

  2 building CM works well. Recovery can be added easily (what cannot on AOSPS). Although version 12.1 (5.1.1), CM still use issues 3.4 kernel so not on the graphics. It is also comes with a camera works but the photos are storted (probably because of the lens wide angle).

  I am very disappointed. Has now spent nearly two weeks to find that any building ROM still will not lead to have a ROM works fully. Also, get comments here seems to be difficult, but we, people come here to get questions... I hope that we will get the binaries for the phone soon to build a ROM that had already been built on other devices for years... the Xperia must return in the package. :-(

  

• Cannot build the sample application headlesservice.

  downloaded the two service without head and UI sample app and imported 10.2 sdk.

  When you build the release version for app headlesservice it gives this error message

  Package failed: 1
  Error: Path access valid asset "active".
  (Point of the error: MD 31 October 2013 16:53:40)

  If I remove the current item in the asset, then the following error message

  Package failed: 1
  Error: Path access valid asset 'arm/o.le-v7-g/headlesservice.so '.
  (Point of the error: MD 31 October 2013 16:49:44)

  https://github.com/BlackBerry/Cascades-samples/tree/master/headlesservice

  garydev wrote:

  What version of the IDE are you running?  (version 10.2.x?)  Please notify.

  g

  SDK 10.2.1 bulid #201308081807 is not the Gold version.

• Can I use private as Source IPs from a remote network IP addresses while building the IPSec tunnel?

  Can I use private as Source IPs from a remote network IP addresses while building the IPSec tunnel? If not why? If so, how?

  Your explanation is much appreciated.

  Hi Deepak,

  In such a situation, you usually NAT traffic that goes to the internet, but exempt traffic that goes through the VPN, because it will be wrapped in packages with public IP (tunnel) addresses. You can use the same IP address on your interface in the face of internet for the NAT/PAT and source of IPSEC Tunnel.

• Push the Plugin problem while that build the app

  I get the following error when I build the app for ios. What is surprising is that the android app sits perfectly with the same configuration.

  "Error - the following 3rd-party plugin causes the generation fails and may need to be updated to a newer version: com.phonegap.plugins.PushPlugin.

  Help!

  Hi shauryag26424738, this plugin is now obsolete. Try to use the last being: phonegap-plugin-push.

  Include in your file as config.xml:

• Apex run and build the State does not

  Hi all

  I installed the Apex and the installation went through without error. I installed and deployed to Weblogic 10.3.6.0. My problem is that the run and build the application version does not have event, although in the f103.sql file I p_build_status = > 'RUN_AND_BUILD '. The column build_status of APEX_040200.wwv_flows also has the value RUN_AND_BUILD. Also the status of the dba_registry column is set to VALID, and the version column is correctly set to 4.2.3.00.08. However, when I enter the URL/http://hostname/ReportServer: port/apex/I get an ORA-01403: no found error. Also, if I try http://localhost:7001/apex/apex_admin I get an error 404 - not found. However, I am able to properly connect to the version of the query - http://hostname/ReportServer: port/apex/f? p = 103 Any help would be greatly appreciated.

  "2715682," Hi

  I don't think that there is nothing to see the status of your application "run and build."

  1. Is there a chance that you performed an installation of runtime instead of a complete installation?
  2. How did you import your application 103?
  3. When you get the HTTP 404 error, are there errors in the Web server log?

  Joel

• Build the query to select date with status

  Hi guys,.

  Grateful if you can advise me on how to build the query on below scenario:

  Table A

  Date

  11.44.39.000000000 12-OCT-14 AM ASIA/SINGAPORE

  11.44.35.000000000 16-SEP-14 AM ASIA/SINGAPORE

  11.44.42.000000000 22-SEP-14 AM ASIA/SINGAPORE

  The result of the query:

  Date                                                                                            Status

  11.44.39.000000000 12-OCT-14 AM ASIA / SINGAPORE inactive

  11.44.35.000000000 16-SEP-14 active AM ASIA/SINGAPORE

  11.44.42.000000000 22-SEP-14 AM ASIA/SINGAPORE inactive

  Basically, the logic, I wanted is

  Active principles: today date or max (date) < sysdate

  Otherwise will be inactive

  And there is 1 active date in time.

  Thanks in advance

  Hello

  2753165 wrote:

  Hi guys,.

  Grateful if you can advise me on how to build the query on below scenario:

  Table A

  Date

  11.44.39.000000000 12-OCT-14 AM ASIA/SINGAPORE

  11.44.35.000000000 16-SEP-14 AM ASIA/SINGAPORE

  11.44.42.000000000 22-SEP-14 AM ASIA/SINGAPORE

  The result of the query:

  Date                                                                                            Status

  11.44.39.000000000 12-OCT-14 AM ASIA / SINGAPORE inactive

  11.44.35.000000000 16-SEP-14 active AM ASIA/SINGAPORE

  11.44.42.000000000 22-SEP-14 AM ASIA/SINGAPORE inactive

  Basically, the logic, I wanted is

  Active principles: today date or max (date)<>

  Otherwise will be inactive

  And there is 1 active date in time.

  Thanks in advance

  Sorry, we don't know what you want.

  Are you saying that 1 row (maximum) can be assigned status = 'Active' and if 2 or more lines are eligible, the last of them will be called 'Active'?

  If so:

  CASE

  WHEN tmstmp<=>

  OR ROW_NUMBER () OVER (PARTITION BY CASE

  WHEN tmstmp<=>

  THEN "could be."

  ANOTHER 'No Way'

  END

  ORDER BY tmstmp DESC

  )  = 1

  THEN "active."

  ELSE 'inactive '.

  END

  If you would care to post CREATE TABLE and instructions INSERT for some samples, so I could test it.

  DATE is not a very good name for a column, especially if the column is a TIMESTAMP, not a DATE.  I called the TMSTMP instead of the DATE column.

• Q: can not build the MOOCData project

  Hello

  I'm sure I'm doing something wrong, but I can't build the MOOCData project. The build option is grayed out when I right click on the project (the project icon looks like a small cup of coffee). I tried to edit a single file to see if it obtained the permit but no. There is no MOOCData.jar file either.

  Any idea what's going on?

  Thank you

  Andy

  One solution would be to open the file browser, click the build.xml file and executes the default target. It worked for me.

  -Andy

• Core upgraded to 4.0 on Centos 7 VMWare Workstation 11 won't build the virtual network device

  As shown in the topic, I have manually compiled kernel 4.0 for my installation of CentOS 7. After the installation of the kernel (in rpm mode, followed the instructions here: How to compile a Kernel - The Way CentOS ) installed all 3 rpm, kernel, kernel-headers and kernel-devel and then tried to start my installation of workstation with it leads to having to re - build the components (as usual)

  It does not, when it came to the compilation of the network management module. See attached log file that it generated.

  I also tried to uninstall, downloaded VMware-Workstation-Full - 11.1.0 - 2496824.x86_64.bundle and re-installed with the same result.

  Any help would be appreciated!

  aaand..., I fixed my only problem!

  Credit:

  https://wiki.archlinux.org/index.php/VMware

  just applied the 3.19 patch and He-voila!