To connect to a Windows XP PC to a printer on a router.

Similar Questions

• How to connect to a windows OS to IOS and run a windows program?

  Hi all

  I would like to know if possible to run a windows program (i.e. DIR or WINVER) on a machine windows on the network via a computer of IOS command line is connected to the same network. Basically, I have 2 computers in a network, a MAC OS and the other is WINDOWS. MAC OS I want to run a command of windows inside the windows machine.

  For example, via the terminal in my mac I want to connect on the windows machine, and run any windows program I have in the windows machine.

  I know it's possible to do on linux via the command line WMI Windows Management Instrumentation command-line.

  Do we have something similar to the WMI for IOS command line?

  Rodrigo.

  I'm confused. You mention a PC (Windows OS), Mac OS (Apple computer) and iOS (Apple iPod touch, iPhone and iPad operating system).

  You can get apps that allows a computer iOS to use a computer mac or Windows computer such as LogMeIn or GoToMyPC.

  Yu can also get the app that allows you to use your Mac to access a PC.

• Cannot connect to Skype, Windows desktop application

  I can't connect to Skype Windows desktop App Win7, Skype 6.9.0.106. Username and password are good. I can log on with these on skype.com. Also I can log in using my address WP8 and hotmail.com. If I try to use my e-mail for loging hotmail.com address, this brings me to the name and password of user Skype page.

  Error: Unable to connect to Skype.

  6.9 Skype is an older version. All Skype versions prior to 6.14 are now disabled, which means that you can longer use the version 6.9. The version currently is 6.21. You must update your Skype.

  http://www.Skype.com/en/download-Skype/

• Satellite P200 - failed to connect to the Windows Services

  After starting Windows Vista on my Satellite P200, I received a message: failed to connect to any Windows Services.The event notification system file are not available.
  Use restricted to the mode of administration.

  No network supports either (wifi, Ethernet,...). At least I can use the PC in batch mode!
  Unable to retrieve a previous saved file system.

  I need to restore my Toshiba restore disk Win Vista?

  Do you offer a lighter solution?

  It's strange, but what you mean with batch mode?
  You can start in safe mode?

  I think the best way is to reinstall Windows with the recovery disk. It only takes a few minutes and then you have the new installation of Windows with all the drivers and tools of Toshiba.

• Laptop HP 15: unable to connect to the Windows store for updates

  Setting up the new HP 15 laptop.  You seem very well online.  Icon says I'm connected to home WiFi.  But when I try to access the "shop", I said that I am not connected to the internet.  What Miss me?  I don't know what else to say.

  Hi there @ElliottO

  Welcome to the Forums of HP Support!

  I understand that you get an error message when you try to connect to the Windows store. You have problems with other Web pages having the same error, or are you able to navigate normally?

  With a bit of checking, it seems that it's an unusual problem, but there are several causes. Here are a few pages of various related forums that can help:

  Store Windows 8.1 does not connect to Internet - eightforums.com

  problem with connection/app store - eightforums.com

  Unable to connect to the Windows store (Windows, 8.1, 8, RT and Pro) -technet.com

  I can't access the store of Windows 8 -answers.microsoft.com

  hope something is useful for you.

• Scan function connects to the Windows 7 computer

  I have a LaserJet M1212nf, CE841A product number and a new Windows 7 computer. The printer works fine from the computer but the scanner is not recognized. I went to this subject through different programs, but nothing seems to work. I also tried to download the latest driver for the printer, but the scanner will not be displayed.

  Hi drandersen,

  There should be an icon on your desktop that say Solution Center, you must also have an icon that looks like a scanner on your desktop. If you click the scan icon can scan you successfully a document to your computer?

  

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.
  
  I would like to know what are the errors you receive?
  
  http://www.HP.com/go/tools

• Pavilion 140 550 - t: unable to connect to the windows service

  Not sure if it's the good advice of post, but here goes.

  Just got the HP computer yesterday and installed Norton Security, Malwarebytes, and Windows Live Mail (do not like the version of Mail). Now, when I start it, I get "Unable to connect to the Windows Service" pop up and WLM crashes when I try to open it. What the DEVIL?

  Had the same problem on the one I just replaced. My laptop became the 'Group Policy' error thing, but I think I fixed it.

  Any suggestions? Windows is a joke!

  If it is Norton Security, then it's a firewall as well and firewalls blocking things, it's that they are supposed to do. So demand for three, you said that this is probably the cause.

  But if you do not want to test it, then try the system restore I've mentioned or reload the image origin, then just put in place the email again and see if it works without the other two installed, first to see if it will work with anything else in the picture.

• Whenever I use my iPhone attaches to internet connection, in the window 'Connections available to the general public', my iPhone is presented as "iPhone 1" the next time that I used it, «iPhone 2 "then 3 then 4 etc.»»

  attaches to the iPhone

  Whenever I use my iPhone attaches to internet connection, in the window 'Connections available to the general public', my iPhone is presented as "iPhone 1" the next time that I used it, «iPhone 2 "then 3 then 4 etc.»»  Currently up to 9. How can I stop this from happening? Or is it still important?

  Hello StevenHuurman

  Try this.

  1. turn on WiFi tethering via the iPhone.

  2 connect the system to the iPhone tethered via the wireless connection.

  3. without closing the iPhone tethering, disconnect the straps of the iPhone system.

  4. now reconnect the system to the loin and Note If the wireless connect denominator increases.

  For the above steps, if you have access to other computers, then try the same steps and allow to know the results of these institutions.

  If the denominator goes up so we know it is a problem with the system and if not then whenever you turn off modem, then again on the iPhone are considered as a new network connection and something has changed in the phone.

  Another thing, you have selected the option for the system to connect automatically when this network is in range?

  Unfortunately I do not know what version of the OS you have here are the steps for Windows Vista and Windows 7. During the installation process for Windows Vista and Windows 7, you will see the option "connect automatically when this network is in range. Make sure that you click this box when you configure the connection to the loin.

  Let me know the results. Thank you.

• How can I get all the connections on a windows 2008 r2 through a VPN server?

  How can I route all internet connections on a Windows 2008 Standard r2 through a VPN server?

  When I try to run just on an account administrator through regular networking, it hits the vpn in offline mode when someone else that the administrator is trying to distance in.

  I have to use a vpn, because I'm on a school network and have permission to use the server, but I have to do my own static IP address.  My solution for the static IP address, he ran through a VPN with data unlimited which ended with a dedicated static IP address.

  Everything on the server works when comes the administrator will connect.  Site Internet/game/file Services/Ect.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• "limited connectivity" on after windows update wireless router.

  Original title: "limited connectivity" on after windows update wireless router. happens all the time after soundcards implemented to date. I then 'restore' on the eve of going online. Why?

  I have... 'limited connectivity' icon wireless router in the toolbar after windows updates. happens all the time after windows updates. I then 'restore' on the eve of going online. Why?

  Hello
   
  What operating system do you use?
   
   
  Method 1:
  Check the update has been installed and make a note of this update.
  To check, follow these steps:
  a. Click Start, in the search box, type in update
  b. click on windows Update
  c. click view update history
  Note: If this isn't a significant update, you can hide the update.
  To hide an update, follow these steps:
  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.
  b. do one of the following:
  o click the link that tells you important updates are available if you have some updates to hide.
  o click the link that tells you optional updates are available if you have optional updates to hide.
  c. Select hide any update you want to hide, right-click and then click on update. Do this for each update you want to hide.
  d. click OK.
  
  If it an important update then you can try the following method 2:
  
  Method 2:
  Download the update of the article mentioned below (enter the number of the update in the search), put the computer to boot and then install the update and check if that helps:
  Download here: http://www.microsoft.com/download/en/default.aspx
  Clean boot: here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• "I can not connect in my windows live messenger from my cell phone.

  From Friday we are no longer able to connect to our Windows Live Messenger of our mobile phone. I contacted Koodo, they said it's a Microsoft Issue and everyone that I spoke to said that they cannot help me as Windows Mobile Professional (I think that's what he said) is no longer in service.

  My phone is a LG model # NKLG9100
  Help, please!
  Annette

  Post Windows Live questions in the appropriate forum found here:
  http://windowslivehelp.com/

• How to connect to your Windows XP computer if I forgot my password?

  Original title: forgotten password

  I forgot the password. IM the administrator

  screen in safe mode, what I do now?

  Hi josegoggle,

  You can view the Microsoft KB articles and check:

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

  You forgot your Windows XP Home password? -Part 1: Introduction

  http://support.Microsoft.com/kb/894900

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit ourMicrosoft answers feedback Forumand let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem to create the Internet connection sharing between Windows XP and Windows Vista.

  Original title: Internet connection sharing between Windows XP and Windows Vista.

  Hello

  Recently, I plugged a laptop running Windows XP to a desktop computer running Windows Vista using a standard Ethernet cable with the intention of use sharing of Internet connection. The notebook contains a wireless connection that I've routed to the office via the cable said.  While the initial phase of installation went well (I was too lazy to do it manually, so I just used the Wizard "Set up a home or small business network" Windows XP,) I had to turn off the host computer to install a program. When I tried to set up ICS again, I couldn't connect to the Internet by using ICS. After this failure, I tried to configure the properties of TC/IPv4 (IP, gateway by default, etc.) manually, but I still couldn't run.  I am able to access the shared host PC and client files. It seems to me that some service essential to the proper functioning of the ICS may be disabled in some way, but it's just speculation, as I have no evidence of such a service. Help would be most appreciated.

  Thank you

  FG-man

  I tried this before using a laptop to share internet with my 360.  problem is there was Nat on the router, and it is in contradiction with the ics.

  Anyway long story short I did some research on the Internet and discovered that if you're behind a router ICS will be confllict with her, as ICS also does routing. a much better option is to "bridge the conections ' on the laptop.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hnw_bridge_install.mspx?mfr=true

  If you go this route, you need to set a static ip address for the office,

  Either that or if you want to continue using ICS put the laptop in the DMZ in the router may help, but it will be less secure.

  Hope that this helped good luck

• Internet connection issues "Limited or no connectivity." and "windows could not find a certificate to log on the network.

  I'm so unable to connect to the internet?

  Hello.

  I'm so unable to connect to the internet.

  Since I've renamed our WiFi network and add a WEP key, I have problems with wireless connection on my
  Windows XP computer desktop, which is a Dell Dimension 4700.

  The questions that I get connection are...

  "windows could not find a certificate to log on the network.

  "Limited or no connectivity."

  I did all the solutions I could try to fix the connection problem!

  1. once I received the message "limited or no connectivity", I click with the right button on the connection and click on repair. It is not always connect for me and I got the "limited or no connectivity message.»

  2. then, I disabled the network connection and then enabled. That no longer works.

  3. I tried to withdraw from the ordered list of connections, and it still doesn't work.

  4. I checked the driver manager, and initially the Ethernet driver was outdated and missing of its pilot. He had a yellow question mark with a black sign and yellow with an exclamation mark inside.

  5. I used DriverZone, downloaded the driver, installed and rebooted the computer after the installation of the it. Apparently, it worked. But I could not always connect.

  6 I have ensured that I entered the correct WEP key, and then adjust the settings correctly. I did it like 10 times in a row and would not always connect.

  7. I tried to go to the command prompt and typed in IP Config/All and that's what I mean.

  Windows IP configuration
  Node type: unknown
  Active IP routing: no
  WINS proxy enabled: no
  ETHERNET connection to the Local network card
  State of the media: Media disconnected
  Description: Intel PRO/100 VE Network Connection
  Ethernet card 2 wireless network connection:
  Suffix the connection-specific DNS: (EMPTY)

  8. after that, I typed the command: ipconfig/release
  and then I got this error...

  No operations can be performed on the connection to the local network, although it has its media disconnected.

  9. after that, I tried Googling for some solutions, and the solutions I found were not any use.
  A solution was

  10. opening of Services...
  Start | Run | Type: services.msc | Click OK |
  Scroll down to and double-click Client DNS | Set to automatic on startup
  type |
  Click apply | Click the Start button | When it starts, click OK
  Do the same for the DHCP Client.
  Do the same for the remote procedure call (RPC).

  and it still doesn't work.

  11. when I look in the menu network connections, I see my connection with a lock on the side, with a red X under the lock and key. In the description, I see not connected, protected by a firewall. How could I remove the internet connection firewall? I disabled the firewall and that did not work.

  12. I tried to uninstall and reinstall the network card and who does not work either.

  It is not the network itself that is the problem.  It is not the modem or the cable. There are no disconnected son or something like that. We have other computers in the House and the internet works fine on other computers. As I said, since I renamed our WiFi network and added a WEP password, I had problems with connecting to my Windows XP computer.

  My computer has updates that must be installed as well. Updates would fix the problem? I just need to have internet.

  What should I do? Thank you for your time.

  Sincerely,

  Justin

  Have you tried to set the value of the link speed/duplex mode? I had the same problem you describe. Your card is only capable of 10/100 communication.

• I can't connect to the internet, get a message when trying to connect it says windows cannot access the specified device

  I get a message when trying to connect it says windows cannot access specified device.you may not have permissions appropriate to access them on my laptop

  Hi MelissaBoltik,

  ·         What is the exact error message?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article to reset the TCP/IP settings.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357