To my mind end... work LV 7.1.1 installation failed

Similar Questions

• DVD player does not appear error - the driver may be corrupted or missing. Code 39, fix the driver installation fails, virtual drives don't work - same results if the material under tension

  Original title: drive does not appear, difficulty he pilot installation fails, virtual drives don't work - same results if the material under tension

  A few weeks ago, as my two DVD players (the two Samsung Lightscribe SH-S223Q of) disappeared after a repair installed, I did for the other problems (not sure if it was directly after installation because I don't notice it right away, but it was no doubt). In Device Manager, it gives the message:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  I tried the Microsoft Fix It tool (Mats_Run.dvd.exe) that detects the problem and says "Install device driver" in a popup, but then he says "software device driver failed to installed. At the end it says under the issue, the "CD/DVD drive is not detected" and the status of Fix 'not set '. Note that, when I boot from another hard drive (with Vista 64 on it installed from the same DVD, just a new installation) disks appear very well. Also I can boot from the drive as well.

  I can't do a repair installation, since it must initiate Windows, and I can't load the disc. I tried to update my BIOS but that has no effect.

  Recently I actually moved this hard drive to another one, with another brand of hard drive and all the rest. Just like before, if I boot from another hard drive (this one with Windows 7), the drive unit-a Optiarc AD-7230 s - looks and works, and I can also boot from the drive at startup. But since the drive hard as I want to use, the drive does not appear. Fix it, etc. Device Manager gives the same messages as before.

  I tried virtual drives - Daemon Tools Lite and Virtual Clonedrive. When I try to add virtual devices to help, nothing happens. The new drive will be displayed in the Manager of devices, but with the same error Code 39 as the real drive.

  What are my options at this point? How can I get the drive to appear or to fix my copy of Windows?

  I could solve this problem. I started in Ubuntu and deleted the existing cdrom.sys, cdrom.inf etc. files (as in Windows, they were protected and I couldn't delete them), then I copied the files from another installation of Vista I had on another hard drive. After having done that, I updated the drivers in device, disabled/enabled readers and readers management that presented themselves.

• How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now?

  How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now with 10.11.3.  I would like to restore the previous version of the operating system without losing any data created in various applications since the 10.11.1.  Fortunately, I had only to use Time Machine is rare over the years, I do not know if you have to return the entire drive to the chosen date or it can somehow just go back to a previous state of OS.  Any suggestions, much appreciated.

  OS X El Capitan: revert to a previous version of OS X

• Since the update to firefox 10.0 (and then 10.0.1), the bottom of the Page, the Page Up keys, start and end work correctly. Is that what someone else has this problem, and are there any suggestions for a fix?

  for example, I read a Web page, when I push the bottom of the keyboard Page, sometimes nothing happens. Sometimes the page scroll a few lines but then does not continue to scroll down when I push the key several times. Sometimes the page immediately jumps to the bottom of the page; etc. Similar issues occur, in the direction towards the top, when I press the Page up key. The keys start and end are completely "dead", because the page does not move when I press them.
  It is important to note that all these keys work as usual when I open the browser Chrome or Internet Explorer, and other applications in which keys should be functional, so this problem is specific to Firefox.

  Hello

  Please check if still use the keys cursor to navigate through the pages is selected in Tools (Alt + T) > Options > Advanced > general and uncheck. This setting can also be turned on/off by pressing F7.

• Bluetooth works only with fresh OS installation

  I bought the laptop from m6-n113dx HP ENVY at Best Buy and a 240 GB SATA III SSD. When I reinstalled the operating system to a previous license that I owned for Windows 8.1 Pro x 64, I could no longer work of Bluetooth radio. The Qualcomm drivers work very well, or at least Windows can't find something wrong with them.  I did not format the original hard drive came with the laptop, so I replaced it to see if the bluetooth radio was working on a previous installation of Windows 8.1 to find it works very well.

  Drivers that have been installed on the functioning of the operating system are the same drivers as the replacement of the BONES.  The radio works with the previous operating system, but not with the new OS.  The only difference I can say is in the BIOS settings where I disabled the option 'Security' on the HP Secure key.

  Where can I go to fix this? I don't mind doing research and my own problems, however, I need some additional tips.

  Thanks in advance for the help that the community can bring!

  Chris

  Hello @chrisvirg,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I read your post on how the Bluetooth does not work on your computer after you have installed Windows Professional 8.1, and I'd be happy to help you in this case!

  To make sure that the Bluetooth adapter works on your computer, I recommend uninstalling and reinstalling the adapter software there is. To do this, I recommend you remove the pilots in programs and features and the Device Manager. Once removed the old software, restart your computer.

  When your computer boots into Windows, install one of the following drivers, according to the name of the card wireless in Device Manager:

  • Broadcom Bluetooth driver

  or

  • Driver Bluetooth software (Ralink) MediaTek

  If the Bluetooth adapter still does not work on your computer, I recommend following the steps below:

  Step 1. Go to Device Manager
  Step 2. Right click on "Bluetooth device" you want
  Step 3. Select "update driver software... »
  Step 4. Choose "Browse my computer for driver software".
  Step 5. Choose "Let Me pick from a list of drivers for devices on my computer.
  Step 6. Select "Ports (COM & LPT)"
  Step 7. Select "Microsoft" to the list of "manufacturers".
  Step 8. Finally select "Standard series via a Bluetooth connection.

  If you are unable to connect to a Bluetooth device, try the following:

  Step 1. Search for 'Change device' in the start menu in Windows 8.
  Step 2. Click on where it says change device installation settings.
  Step 3. Select No, let me choose what to do option.
  Step 4. Check the automatically get the device app option
  Step 5. Click on save changes to save the settings that you select

  You can also try the following:

  Step 1: Go to RUN (Windows Logo + R) and type "services.msc" and Enter
  Step 2: Now find 'Bluetooth Support Service' and double click it
  Step 3: Now click on the Log on tab and type "Local Service" without the quotes
  Step 4. Click on "account".
  Step 5: Now remove any authorization of passwords the password field blank
  Step 6: Below the upper left title should be a hyperlink 'Start' click

  You can also view tab management power and unchecked the box that says "Allow the computer to turn off this device to save power."

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• SSD not work / be detected - error Windows installation on laptop HP Dv6-1149wm

  Well, well, I tried three different nine ssd: 1 kingston v300 120 GB SSD, 2 840 120 GB ssd samsung, and 3 an another kingston v300 120 GB SSD. Tried in this order.

  The Kingston-discs Are not detected by the bios no error or nothing, nada. When it is attached to another computer running windows drives are detected properly. nothing wrong with that.

  The Samsung player- It was the second drive I tried. It has been detected by the bios but diagnosis gave me the '303' fast error. When you install windows via USB, it asked me to drivers before proceeding. When installing from a cd, I could get to the point where I see the drive listed. I would get errors when I would try to partition or format. Not even partition the drive via the command prompt by using diskpart worked. It returns an error indicating an incorrect setting or something like that (Note I could partition the drive here but not format NTFS).  I could manually partition on another system completely. Formatting/partitioning via another system has allowed me to completely enter the installation up to the point where it says "installation of features" then it gives me an error saying that it was impossible to define the local system - or something like that. In addition to that I also tried to install windows on the other system that was working fine but would not transfer to the laptop. I also tried the previos on the ssd drive cloning, but when booting the computer gave me a disc read error.

  My personal desktop (OCZ Vertex 4 128 GB) drive- it has worked. Diagnosis of computer picked up fine and did not point out the mistakes. The only thing is that I tried to install windows on it because I already had a facility there.

  My thoughts– my best guess is that there is a kind of incompatibility with the drives firmware and the BIOS of the computer. The Bios (Insyde h20 F.21) is very limiting in a first time, too easy to use, and not much to do here, second he has not seen an update since 2011. Seems to me that the SSD technology may be advancing faster that HP can follow their updates (this of course assuming it's the BIOS that is at fault)

  I am open to suggestions for ideas, basically anything that can help me at this point. I spent many hours on it and I turned empty.

  In the end, I ended up putting 4 vertex in there. For some reason, the mobo refuses to recognize the kingston ssd. The samsung, I can't say with certainty because it detected well, but wrong on everything. Must have been a bad disc. It's weird that the manual says it does not accept the ssd because many old machines still accept DSS. Any ways long story short the the kingstons were not compatible, probably faulty samsung, the ozc was the only one that worked perfectly.

• Acrobat 9 Pro (Master CS4 Suite) works not at all after installation

  I had to reinstall all my software Adobe CS4 after I restore my iMac any HD issues I had with other things after upgrade to El Capitan (initially before restoring HD no problems with Adobe Acrobat Pro).

  Now with the own drive, I reinstalled my software including Acrobat Pro, and everything seems ok except my Acrobat Pro. I uninstalled and reinstalled just that as uninstalled and reinstalled everything and it still doesn't work.

  When I first open it upwards, he said: there are some missing items that need repair. I've attached a screenshot of the message. So I say keep and all I get is anything other than 'Acrobat' in the main menu choices but nothing underneath, no help no menu nothing. And when I try to stop it it won't let me, I have to force it to quit.

  Can anyone please help me why it does not work. I'm in my mind filled with questions of El Capitan and now having this problem just because I reinstalled it on my own HD again.

  

  Adobe does offer not supported for CS4, as we know, even if we paid for the software it is basically our bad luck now if we have problems. Hoping someone can help me on this problem through the forum, including Adobe support please

  Thank you

  Hi MightyMaya,

  It may or may not work, difficult to guess as its on an unsupported platform.

  We will recommend so you can use the application in a supported environment.

  Kind regards

  Nicos

• Can I remove the 10.6 and bootcamp or windows still work with previous 10.11 installation?

  I have an early 2009 mac mini, 10.6 installed bootcamp at the same time on the hard drive. Have windows 7 installed on bootcamp.

  Recently, I removed the CD - RW drive and put in an SSD. I then installed 10.11 on this drive and use it as the startup of the operating system. I noticed that I can run applications that has been installed to 10.6, Autocad 2013 being a.

  What I would do is make hard drive on the old hard drive space by removing the 10.6. I can do this without destroying the current installation of bootcamp and windows 7 install?

  Due to the limited space on the SSD drive, after removing 10.6 I want to update my old applications and install less 10.11 but actually during the installation, install the actual application on the old hard drive files. Of course I know that it works, as stated above and previous experience.

  Fundamental question needs to be able to always use bootcamp and windows 7 install I have now, even after the removal of 10.6. Is this possible?

  Once Windows is installed (W7 in your case), it is autonomous. But it is very sensitive to partitioning of the changes/resizing efforts.

  If you want to keep the old Applications (10.6) intact and on the old disk, but use the 10.11 on the SSD, the only space you get in return is at the heart of 10.6 OS. It is usually 16 to 32GB.

  If you have verified that each of your applications is fully functional under 10.11, backup Applications on an external drive and erase only 10.6 partition. Create a reader of 'Fusion' between the SSD and the old HARD drive 10.6 and then drag Applications from the external drive in the Fusion drive application. It will also give you performance SSD for your Applications, rather than leave it on the HARD drive part that will slow them down.

• HP 260 G2: USB does not work with W7 x 64 installation ENT

  I have a new G2 of 260 HP, when I proceed to the installation of W7 x 64 USB business, after th e first loading, USB devices does not work. I tried with the utility of th 'Installer_Creator' from Intel, but with the same result.

  You can someone help me with this issue?

  Thanks in advance

  Mauro Caputo

  Hello:

  You must run this utility...

  https://Downloadcenter.Intel.com/download/25476/Windows-7-USB-3-0-creator-utility

  Your only other option would be to use a PS/2 keyboard and mouse to complete the installation and then install the drivers for Chipset and USB3 you need.

  or see this post for an alternative solution.

  http://h30434.www3.HP.com/T5/business-PCs-workstations-and-point-of-sale-systems/HP-prodesk-600-G2/m-p/5485092#M11107

• Satellite M40X - material works does not after re-installation

  Hello

  I just reinstalled my Satellite M40X with a WXP Pro. For some reason all the edge
  hardware does not work and it is still impossible to install it manually.
  Does not not to date:
  W - Lan (not shown)
  Controllers USB (although my usb mouse works fine)
  all of the controllers listed in the list of material

  I tried to download the drivers from the hp toshiba but nothing worked
  I could not find the drivers for the controllers in general.

  If you have suggestions please tell me

  Best regards

  Jan

  My first question; why don t you use the recovery CD?
  My second question: WinXP Pro contains SP2?

  Hey dude, or you have installed the fake software, drivers or / and updates are missing.

  First install all updates from Microsoft and secondly if you install divers manually do not forget that you do it in the right order!
  Did you check the Toshiba driver page exactly? You will find installation instructions. Have you followed this guide line?

  I thik you know now what to do.

• End of 2013 SSD Macbook Pro has failed

  The SSD in my end 2013 13 "retina MBP failed, leaving me with a very nice and completely unnecessary aluminium piece.

  The genius bar appointment confirmed the failure by saying that it was obviously a defective component, but that my only option was an Apple Service / repair costs £526 + VAT.

  Someone else has met a failure of this type in the same model of MBP?

  This would be a general problem with the SSD components used in this edition of the MBP that is similar to the issue of MB Air?

  I'm obviously gutted by the failure and lack of options and cost of repair in this case adds insult to injury.

  Apple has lost a long-term MBP owner / client.

  Stephen...

  You may be eligible for a reminder, but you will need to check with the Apple support.   Read this article, and then Google ' Macbook pro / ssd reminds "."   You will find several references.

  u-to-bad http://www.Theverge.com/2013/10/18/4853430/Apple-recalls-last-years-MacBook-Air-d - SSDS

  Good luck.

• Satellite P775 program - BluRay player does not work, pilot installations fails

  Hello

  I have a laptop Toshiba P775 program-110 and the blu - ray player no longer works.
  Tried to install the new driver, but it comes this message:

  http://S14.directupload.NET/images/140918/4xjmnhwg.jpg

  If I put a blu - ray in the drive, it starts and stops playback, but it won´t game.

  In the Device Manager everthing seems good.

  I remember after update driver for second or third blu - ray that he began to cause trouble.

  Please, you have any advice?

  Thank you
  Denny

  Wait a moment Denny. If I understand you correctly, you have just problem with Blu - Ray player installation, right?
  I assume that the optical disk drive is running OK and can read CDs or DVDs.

  Can you please tell us what you are trying to install exactly (version number)?

  Maybe you should remove preinstalled BD player, registry clean and try to reinstall this version.

• Time Machine don't prune the old El Capitan backups and works out of space and "backup fails.

  With the help of El Capitan 10.11.1, I noticed a change in behavior with the handling of the time Machine of large files, specifically the files of virtual disk VMWare Fusion (about 50 large concerts).  After a few weeks of use of fusion VM virtual machine, Time Machine gives an error where it ran out of space and "backup failed."

  I had the same problem occur on a second iMac that I own.

  I reformatted my external drive for Time Machine and started fresh, but after a few weeks, I got the same error again.  It seems that Time Machine is not the size or remove older backups of VMware virtual disk to provide a space for the new.

  Previous versions of Mac OS X and Time Machine had no problem with the backup of large files such as these.

  Has anyone else noticed "backup failed" message with Time Machine on El Capitan?  I know that I can exclude the disk virtual VMware backup, but that defeats the entire purpose of Time Machine backups.  Any suggestions?

  Time Machine automatically deletes older snapshots to make room for the new. If your backup history is shorter than expected, it may be because you want to save one or more large files frequently.

  Software virtualization VMware, Parallels or VirtualBox creates a large virtual disk container that is constantly evolving. It will not be saved at all while the virtual machine running, and at other times it must be saved each Time Machine performance. Who fills up quickly any backup destination.

  You must exclude files from virtual drive of your Time Machine backups. To do this, click the Options button in the Time Machine preferences window. You can also do this to virtualization, application settings. Back up the files on the virtual disk within the comments system, using a native backup application.

  A compromise solution is to create a 'snapshot' of the virtual machine in the virtualization software (not a Time Machine snapshot.) This will give you a single large file that never changes and only has to be saved once. All future changes will be stored in a file that is much smaller initially, but will grow over time. You must always exclude this backup TM file. If you need to restore the computer virtual of Time Machine, you will have a working configuration, which will be easy for you to restore the rest of the data in the system of comments.

  See also this page of Parallels support.

• Keypad doesn't work is not after the installation of windoss 8.1

  Team,

  Recently, I installed windows 8.1 pro in my laptop after I installed some drivers.

  After installing Numkey pad is completely his work as guidelines instead.

  When I click on lock its beep again and again. can u help with this problem.

  Thank you

  Sheik

  Hello

  Have you tried a clean boot? They work in clean boot?

  What happened in Mode safe?

  Do you have updates of Windows again?

  Say the HP Support Assistant?

  Say the automatic adjuster?

  Did you back manually move the bar?

  Occurs when you do?

  Where did you download the driver AMD?

  It could very well be the wrong driver:

  Uninstall the graphics drivers in your device manager.

  Restart the laptop twice.

  Please, try the above troubleshooting steps and respond with answers for each question.

  Thank you.

• Windows Update does not work and the McAfee icon installs and shows off

  Two problems now: first I tried the fix for windows update and it did not work.  I think that I have a malware. second is a problem of McAfee.  I turn on my laptop in th emorning and it tells me that my security is disabled.  My McAfee icon moved on the desktop without changing.

  Hi John,.
  Your computer is probably infected by malicious software. Try following the steps in this guide to malware removal: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.
  Brian