To start windows I hear a three-bipping (the code).

Similar Questions

• Cannot install window updates 14 altogether 646 of the code

  Cannot install window updates 14 altogether 646 of the code

  luckyslap,

  read the problems known in this page, they explain what to do. There is a link to a fix the article.

  http://support.Microsoft.com/kb/2258121

  Let us know if this helped.

• I just bought a key code to update from microsoft for windows xp. When I enter the code is says I have an invalid code? can someone help me?

  I JUST BOUGHT a key code to update from microsoft for windows xp. When I enter the code is says I have an invalid code? can someone help me?

  Hello

  1. what exactly are you referring?
  2. Enter the code to upgrade the main code of the Office application or operating system?

  Follow the steps in this article.

  You receive an error message after you enter the product key when you try to install Windows XP
  http://support.Microsoft.com/kb/310637

• Envy 15-j059nr: Envy 15-j059nr would not start Windows after update to win10 now the hard drive is missing

  This system worked before Windows 8.1 it has been upgraded to Windows 10 last year. It's my boyfriends computer and last night it kept getting blue screen dreaded with errors on his hard drive. He kept ignoring. Then, his computer's battery died and when he started upward, he could get a blue screen and act as if it would repair itself and would just start all over again. He was going in a loop. He did not know what he was doing, but searched on the Internet and ended up messing around any more.

  Its installation was 850 GB HD 3 partitions, it was set up as a Raid was one the main C drive, one was the restore disc and the other hides. He changed the disk. He changed a few things in bios too, but I don't know exactly what.

  The problelm I have right now, is that when that I boot without the USB bootable media, I created, I'm stuck at a screen that says there is no startup disk and no installed operating system and press F2 to run Diagnostics. When I run the diagnostics, just fine, no errors.

  When I try to recover, repair, reimage or anything other that to reinstall, it goes back to the screen I mentioned above which does not allow me to do anything about this either, with the exception of past at the command prompt, which is X and not C. I did a dir/w and only seen the windows files are here , but under the users directory, documents and images are empty, so don't know if it's even watch what I think it is.

  When I want to install Windows 10, everything goes smooth and then bam, he wants that pilots. I can't find the drivers for this laptop who don't have the .exe and require installation. This notebook is not a CD/DVD player on it. I don't mind doing a reformat and start all over, if I could recover his pictures on his hard drive. They are his grandfather.

  Help, please!

  Thank you in advance!

  AggieFan378

  You are the very welcome.

  Unfortunately, I woudn't be able to help you with that.

  I'm afraid that the PC is now a useless paperweight because of the BIOS update has failed.  There is usually no recourse other than to replace the motherboard.

  If all goes well, you were able to recover the files before that happened, and if not, get a SATA cable adapter USB and read the hard drive on another PC.

• Windows XP Setup hangs at «Setup starts Windows...» "after all the required drivers on the CD loading.

  My Pentium III 1.0 GHz computer (394 MB of RAM, disk hard 500 GB) crapped out on me after that I loaded soft PicturePerfect of Nikon.  For some reason, the Nikon software ruined my registry.  Now, whenever I turn on my PC, I get the BSOD with error "Unpaginated IPF in space".   I can't start my computer in safe mode or "start Windows normally" as I get the same error msg almost immediately without seeing the Windows logo and progress bar.  I can start my PC using the "last good known Configuration" and he will be starting the Microsoft Windows logo with the progress small downstairs bar, so I know that the hard drive is fine.  Then the screen goes black while WinXP is loading from the hard drive, and then the BSOD with error page comes up.  I suspect that there is incorrect data in a critical area of the drive where Windows requires data start correctly.   In the meantime, I can't boot into Windows at all because all Windows options lead to BSOD with the msg of error page.

  I resigned myself to reloading Windows XP from scratch, but I can't seem to get my original installation CD to not work.  I've reconfigured my BIOS to Boot CD, and then start the original Windows XP CD.  He reads and load it all very well, and then it hangs at «Setup starts Windows...» "I thought he had to test the equipment, but it remained in this State for 3 hours!  The "Welcome to Windows Setup" screen never came.

  I thought to use FDISK to the new drive of 500 GB and formatting on the errors on the hard drive, but I can't do since I can't complete the installation process.  I feel stuck in a bad situation where I can't enter BACK to FDISK and FORMAT my C: drive.

  Pls help!

  Thank you!

  Here's what I did and learned:

  1. I replaced my DVD burner with my CD - R original delivered with the machine and disconnected the 2nd CD - R.

  2. I disconnected my 2nd hard drive, in part to minimize the current of the power supply, but also to keep clean and simple start between a (hard) C: and D: (CD - R) drives.

  3. I re-tested my SDRAM using test mode full and deep.  To my surprise, I found not 1 but 2 SDRAM bad!  I replaced the original SDRAM 128 MB and re-directed tests of memory with the Diagnostocs memory of Windows and Memtest86 +.  All the 512 MB of RAM is perfect now.

  4. I started to new WinXP and have the msg «Setup starts Windows...» ».  This time, I waited for about 15 minutes and to my surprise the configuration screen came!  There is a long period of time between the msg «Setup starts Windows...» "at the start, and when the configuration menu actually comes to the screen.  I was able to partition and format my hard drive.

  Lessons learned:
  -Maintain the number of devices to a minimum so that it keeps unknown hardware failures to confuse the troubleshooting questions.
  -Test the RAM in deep test mode is important and test several times.
  -It could be more than 1 Bank of RAM can be bad so carefully test RAM.
  -Wait for the next Windows installation menu.  It is not instantaneous, but it will come sooner or later.

  Thank you!!!

• Why Windows Update give me 646 of the code and says it cannot install updates when I try to install?

  I've had this problem for quite a while now, and I recently tried some suggestions from this forum to try to fix it. First I tried to copy some commands to the Notepad, saved and click with the right button on the shortcut and clicked on run as administrator and tried to download it again, and it still does not work. Then I tried to download them from the Web site, and that no longer works. I'm tired of seeing this happen.

  The updates that fail to install are:

  Microsoft Works 8
  Update for Microsoft Works 8 KB977304 security

  Office 2007
  Update for Microsoft Office Excel 2007 KB973593-security
  Update for the 2007 Microsoft Office System KB973704-security
  Update for Microsoft Office InfoPath 2007 KB976416
  Update for Microsoft Office Outlook 2007 Junk Email Filter KB977719
  Update for Microsoft Office Word 2007 KB974561

  But have you tried any suggestions? You say you only tried a few suggestions.
  + site: microsoft.com & rn = Windows + Update + Forum http://social.answers.Microsoft.com/Search/en-US/?Query=646&RQ=meta:Search.MSForums.forumid (f713b70a-5915-4a57-af67-a2252a86a8f1)

  for example: -.

  You can try to download the updates manually (search for a download
  http://www.microsoft.com/downloads/search.aspx?displaylang=en) or try the following command to see if it helps

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

  TaurArian [MVP] 2005-2010 - Update Services

• Try to turn on the Windows Firewall for vista home basic, the code of error 0x6D9

  I need help to turn on my windows vista basic home firewall but get error 0x6D9 code. This makes me crazy... I pay your bills online and can't do anything until my firewall is on

  Hi William,.
  Follow these instructions to fix the Windows Firewall:
  Download and install Windows Repair:
  http://MajorGeeks.com/tweaking.com_-_Windows_Repair_d7141.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Uncheck all boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer. Let me know if this helps you.
  Brian

• After starting Windows Vista Recovery dvd 64-bit, the files are loaded on my laptop, however after the loading screen are replaced by a black screen and the white slider.

  Hi all

  I have my laptop startup problems, and after you use the Windows Vista Recovery dvd(64 bit), I get a black screen with a white cursor. If I try to start the system in safe mode, I get an error message "windows/system32/ntoskrnl.exe is missing or damaged. Because I can't run the recovery dvd, I'm a bit stuck. Any suggestions?

  Evan

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• Cannot start Windows and I can't find the Vista disc.

  Hi all, this is the problem. After his stop with the option to install updates, I restarted my laptop, then he said "Windows failed to Start. Other options include Safe Mode and last good known Configuration. The two option did not work. My Windows Vista computer came with my Sony Vaio laptop and I couldn't find the disk. After various Internet research, looks like the only one that works is to have the Vista disc.

  How can I fix this without that the disc of Vista? Any help is appreciated. Thank you.

  Hello

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• Cannot start Windows 7 message and passed through the repair. SYSKEY problems?

  I received a call that the security program, we have installed last year had been compromised. We bought this company safety program. Then they asked to get on computer, which they did. Then they showed through the event viewer that the computer has been used by others. Started sounding fishy and then they wanted to buy us another program. I told him that I wanted him out of the computer, I would call them back. The guy then pulled up the syskey and typed a password and is out. Worked very well after that but now it works and now I received a message that microsoft cannot be started. The sykey is too ride with my original to enter the computer password?

  Examine your computer to be totally compromised.  You follow the recommended procedures for identity theft.

  Do not use the computer or go online for nothing. Re-install your system or have done to you.

  Notify your banks, credit cards, the police and the post office.

  Never allow people to connect to your computer, unless you are quite comfortable, that they are worthy of trust.  You have been scammed.

• Windows Update will not download anything, the code error code 80070641 and 641

  When I try to download things it says Update window won't I don't really know what to do and my windows update will not install the things he asked me of! Help, please

  Hello!

  It's what has helped us to
  This error code occurs when the Windows Installer is damaged
  Try this:

  Open Notepad.

  Copy the following into Notepad and save it as fixme.reg

     push all the files and then save it to your desktop.

  Windows Registry Editor Version 5.00

   

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\msiserver]

  'DisplayName"="@%SystemRoot%\\system32\\msimsg.dll,-27 '.

  "ImagePath" = hex (2): 25, 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 72, 00, 6f, 00, 6f, 00,------.

  74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 6 D,------.

  00,73,00,69,00,65,00,78,00,65,00,63,00,20,00, 2f, 56, 00, 00, 00, 00

  'Description"="@%SystemRoot%\\system32\\msimsg.dll,-32 '.

  "LocalSystem ObjectName"=""

  "ErrorControl" = DWORD: 00000001

  "Start" = dword:00000003

  'Type' = dword:00000010

  "DependOnService" = hex (7): 72, 00, 70, 00, 63, 00, 73, 00, 73, 00, 00, 00, 00, 00

  "ServiceSidType" = DWORD: 00000001

  "RequiredPrivileges" is hex (7): 53, 00, 65, 00, 54, 00, 63, 00 62 00, 50, 00, 72, 00, 69, 00, 76,------.

  00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 43, 00, 72, 00, 65, 00, 61, 00,------.

  74,00,65,00,50,00,61,00,67,00,65,00,66,00,69,00, 6 C, 00, 65, 00, 50, 00, 72, 00, 69,--------.

  00,76,00,69,00 6 c 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 c, 00, 6f 00, 63, 00,------.

  6B, 00, 4 d, 00, 65, 00, 6 d, 00, 6f, 00, 72, 00, 79, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

  00,65,00,67,00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00,------.

  73,00,65,00,42,00,61,00,73,00,65,00,50,00,72,00,69,00, 6f, 00, 72, 00, 69, 00, 74,------.

  00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00,------.

  65,00,43,00,72,00,65,00,61,00,74,00,65,00,50,00,65,00,72,00, 6 d, 00, 61, 00, 6e,------.

  00,65,00, 6F, 00, 74, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 C, 00, 65, 00, 67, 00, 65, 00,------.

  00,00,53,00,65,00,41,00,75,00,64,00,69,00,74,00,50,00,72,00,69,00,76,00,69,------.

  00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 53, 00, 65, 00, 63, 00, 75, 00, 72, 00,------.

  69,00,74,00,79,00,50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00,------.

  00,53,00,65,00,43,00,68,00,61,00, 6F, 00, 00, 65, 67, 00, 4F, 00, 6f, 00, 00, 69, 74, 00,------.

  66,00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53,------.

  00,65,00,50,00,72,00, 6f, 66, 00, 00, 69, 00, 6 c, 00, 65, 00, 53, 69, 00, 00, 6F, 00, 67, 00,------.

  6 c, 00, 65, 00, 50, 00, 72, 00, 6f, 00, 63, 00, 65, 00, 73, 00, 73, 00, 50, 00, 72, 00, 69, 00, 76,------.

  00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 49, 00, 6 D, 00, 00, 65, 70, 00,------.

  72,00,73,00, 6f, 00, 6F, 00, 61, 00, 74, 00, 65, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

  00,65,00,67,00,65,00,00,00,53,00,65,00,43,00,72,00,65,00,61,00,74,00,65,00,------.

  47.00, 6 c, 00, 6f, 00, 62, 00, 61, 00, 6 c, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00, 65,.

  00,67,00,65,00,00,00,53,00,65,00,41,00,73,00,73,00,69,00,67,00, 6F, 00, 50, 00,------.

  72,00,69,00, 6 d, 00, 61, 00, 72, 00, 79, 00, 54, 00, 6f, 00, 6 b, 65, 00, 00, 6F, 00, 00, 50, 72,------.

  00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 52, 00, 65, 00,------.

  73,00,74,00, 6f, 00, 72, 00, 65, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.

  00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00, 73, 00, 65, 00,------.

  51,00,75,00, 6f, 00, 74, 00, 61, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.

  00,65,00,00,00,53,00,65,00,53,00,68,00,75,00,74,00,64,00, 6f, 77, 00, 00, 6F, 00,------.

  50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 54,------.

  00,61,00, 6B, 00, 65, 00, 4f, 77, 00, 00, 6F, 00, 65, 72, 00, 00, 73, 00, 68, 00, 00, 69, 70, 00,------.

  50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 C,

  00, 6f, 00, 61, 00, 64, 00, 44, 00, 72, 00, 69, 00, 76, 00, 65, 00, 72, 00, 50, 00, 72, 00, 69, 00,------.

  76,00,69,00, 6 c, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 42, 00, 61, 00, 63, 00, 6 b------.

  00,75,00,70,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00,------.

  00.00

  "FailureActions" = hex: 84, 03, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 14, 00, 00,------.

  00,01,00,00,00, c0, d4, 01, 00, 01, 00, 00, 00, e0, 93, 04, 00, 00, 00, 00, 00, 00, 00, 00, 00

  Go to your desktop and double-click the file name fixme.reg

  or

  Click Start.

  Type regedit in the search field and press to enter.

  On the registry change windows click on file and select import.

  Navigate to the location where the fixme.reg file and select the file.

  Click ok on the windows screen once the registry is merged successfully.

  Restart computer and check if updates installs.

  I also had iolo which weaken my Windows Installer and I had to uninstall it.

  Hope this helps

  Microsoft KB article:

  http://support.Microsoft.com/kb/2642495

  Please come back if you need more help

  Thank you

  Makoi

• Not able to install update "Cumulative Windows Driver Framework version 1.11" the code of error 80041002.

  Original title: kb2761494 update failed

  Canning update fails with error code 80041002... help?

  Hi Rocky,

  Thanks for the reply. Unfortunately the steps did not work. Try these recommended steps and check if these steps solve the problem.

  Method 1:

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  How to back up and restore the registry in Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry  

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important: When running chkdsk on the drive if bad sectors are found, chkdsk tries to repair this sector. If all the data available on this disk may be lost.

  Perform these steps and come back if you face any issues so that we can help you further.

• Windows Update for windows install will not update with the code 641

  an important upade listed, click to install the update (update security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2656368))

  Download size: 1.9 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security issue has been identified that could allow an authenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=237397

  Help and Support:
  http://support.Microsoft.com) I get an error code 641

  TIP: See the first, 4 specific sub-section of .NET Framework of the method of resolution 2 (only!) on this page-online http://support.microsoft.com/kb/976982

• Cannot start Windows CD-ROM - Windows trouble so can't

  When I turn on my laptop I am instantly present the screen asking me to select start Windows normally, Safe Mode and know the last good Configuration. No matter what option I choose, then it says "the file windows\system\config32\system is either corrupt or missing. Insert the Windows CD in an attempt to repair this file. »

  OK, so I insert my CD of Windows XP Pro and my laptop will not load it. I decided to go into the settings of the BIOS (by pressing "Esc" when "Toshiba" appears), and change priority boot CD-ROM > HDD > FDD > Lan. It also did not work. How am I supposed to repair my XP installation if I can't even start the CD-ROM?

  Help, please! Thank you

  I posted in another topic where you described your startup problem, but I just have to repeat it here.

  To force the CD/DVD drive as the first boot device, you have three options:
  Press and hold C after having turned on the laptop
  Choose the boot device after pressing the F12 key
  Change in the BIOS boot order

  If no method can help, try using different media bootable (Windows, Linux). By the same result I think there is a problem with the optical disc drive. Try to contact and explain the situation. I put t know which model of laptop you have and how it looks with warranty but if there is a problem with the car it will be exchanged free of charge.

• Satellite C650-1CP - cannot start Windows

  My C650, running on Windows 7 could not start properly today. When turn on/off he went to the Windows Error Recovery screen and gave me two options: run a startup repair and start Windows normally. I clicked on the repair option and on the bottom it says windows is loading files, then it's another loading screen, and finally to a black screen, which, after a few seconds, a cursor appears. No matter how long I left my laptop on nothing changes. So I decided to choose the second option, and he went to the splash screen windows with the logo of the movement. This form lasted around a minute, and then a blue screen with an error, which is then passed to a black screen. To see this error, I completely disabled the auto reboot on system failure in the F8 options and once restarted, he took me to the same error page.

  On the blue screen error was as follows:
  UNMOUNTABLE_BOOT_VOLUME

  She was followed by information saying that it's maybe a software / hardware problem and also to try safe mode.

  Technical information at the bottom were the following:

  STOP: 0X000000ED (0XFFFFFA8003DDFA50, 0XFFFFFFFFC0000185, 0 X 0000000000000000, 0 X 0000000000000000)

  I don't have a recovery disk, if I looked on websites have said recovery is built in. I also tried safe mode, repair your computer, last known config and other options in the F8 key, but these do not properly load and I end up on the black screen with a cursor again.

  I had originally to Exchange my laptop in a week to buy it because it was defective and I had a little less than 11 months, I wonder if there is a solution to this problem and also know if I am covered under warranty for this problem. Thank you.

  Hey,.

  Bluescreens are mainly problems of software or drivers so I think that reinstalling Windows would help to get rid of this.

  Why you don t have a Toshiba Recovery disk? I mean in the user manual it clearly written that you have create such a floppy yourself and it only takes a few minutes and you need to blank DVDs. All that s.

  The recovery disk contains an image of the settings from the factory with all the drivers and tools. It is an image pre-tested by Toshiba so everything will work after the installation of recovery. With this record, you are on the safe side.

  Anyway, you can order a recovery disc here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Software problems are not covered by the warranty. Of course, you can make the laptop to an authorized service provider and guys are going to reinstall to factory settings, but you have to pay for this service.