to use the help of a friend (distance) the configuration steps should I take?

Similar Questions

• Inject an apple ID and PW using the Configurator 2?

  Hi all

  Wondering if a id apple & PW can be added to a profile and deployment using the Configurator 2. Sorry if this has been covered, am new to this and learning and discovery I.

  see you soon,

  Kristian.

  Hello, Kristian,.

  AC2 negates the need to have a configuration of account iTunes\AppleID on each device, can I ask why you wanted to do this, there may be a better way? ipads how are you trying to install? ipad users can add their own iTunes account to download other additional applications then deployed via the configurator.

  Kind regards

  Rick

• Cannot use the configuration information of the States DVD burner are incomplete or damaged

  I have an external PIONEER DVRW DVR X 162 DVD WRITER, and I can't use 0depenses with dvd software.
  the warning in the DEVICES MANAGER says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)
  What should I do now?
  Thanks, Mike

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Can I use the following script should set up rman DB only or non-rman configured DB

  Hello

  I need your help this following script

  recover database using backup controlfile until Cancel;

  I can only used in configured RMAN DB.

  (or)

  Can we used above usual script on database (IE. RMAN not configured the database)

  Please suggest me. Thanks in advance.

  If you use RMAN to create backup BackupSet, you use RMAN to RESTORE the database.

  Subsequently, you can use RMAN or SQLPLUS to issue the command to RECOVER the DATABASE.

  (RMAN has no clause 'using backup controlfile' because it identifies the controlfile as a backup, while sqlplus must use the following clause if the controlfile is a backup)

  Hemant K Collette

• When you use the camera application, it will take two photos at the same time.  The first is in the shot, but the 2nd has movement, say a movement arm or head.  Weird.

  I use the 6s and do not have this problem, but at a rally over the weekend, TWO others in the Group showed me the instances of this weird thing.  I'm a photographer by profession and like solving problems.   Cannot understand this.

  Probably "Live Photo.  Read the photo section of the manual here.

• How can I access apex_admin by using the configured services to oracle rest glassfish

  am new to APEX so please forgive my ignorance.

  I'm trying to access apex_admin to start to create workspaces. but can't seem to get the screen to apex_admin

  try to access using

  ADR / http://hostname:8080 / apex_admin

  We get the message that installation has not yet been configured...

  Hi Celtpinoy,

  It is a popular problem. Him more often cause one or the ORDS.war is not the same as the settings of the current database using the

  > java-jar ords.war of installation

  OR the configuration directory is not indicated on the right directory using

  > java-jar ords.war configdir

  I suggest that check it out you.

  Kind regards

  Benjamin.

• Optimization: Game using the timer. Should I use onEnterFrame listener

  I have an app to teach English. You have 20 seconds to answer each questin and progress / timer bar sinks.

  I think I read somewhere that the timer takes a lot of CPU, so if we schedule 20 seconds to answer each question, then the timer is still active.

  We could use the onEnterFrame event handler just add seconds per image.

  Is it much better for our CPU because the game is a bit slow.

  the timer does not take a lot of cpu.  It is the function of listener that can occupy a lot of cpu, especially if you call him several times per second.  your timer function performed once in 20 seconds is not a problem.

• Address field is red - a color that is difficult for me to see. Is it possible to use the configuration editor to change the color.

  Apparently a bug in Thunderbird is changing the "To" address to the Red even if the recipient is in my address book. The address is displayed when I start typing the first few letters of the recipient, but the text turns red which is difficult for me to see. I want to continue to enter addresses that I always (first letter type or two) would be the simplest solution to change the color from red to something easier for me to read. I looked in the configuration editor but can't seem to find a key that is appropriate for the address field. Can anyone provide assistance?

  Update to Thunderbird 38.0.1.

• The configuration step of the calendar after the call to DAQm angular encoder, takes a lot of time vey even to 1000 samples per second. No idea why?

  I use an encoder in quadrature with DAQmx 6259, the call to read the outputs of the meter is slow, much slower than the sampling rate? No idea why?
  Thank you

  Hello Roxanne,

  In the title of this thread, you mention that the calendar configuration step takes a long time.  Is now called node configuration several times in your code?  You may find that your code runs faster if the channel configurations and the task doesn't occur once.

  Our example of the expedition, ' counting digital Events.vi ' may be of interest to you.

  Can be found by browsing our example search tool:

  'Help' examples

  Once opened, the example Finder you can find this example by browsing:
  "" material input and output"DAQmx" counter measures "County Digital Events.vi

  Best regards.

• Net M4110x - Net management and iSCSI. Clarification of the configuration steps. The documentation is at best ambiguous.

  Hi guys,.

  I'm having a lot of trouble to translate what I know PS6000 table to the new M4100x.  Here's what I'm building:

  

  I want my iSCSI traffic that is completely isolated from all other traffic, and I want to use the CMC network to run the Board.  It must be a simple configuration, but Dell documentation for which is worse than useless.  It confuses and everyone who's read it confuses.  Why is this?

  It seems that I should be able to assign the IP addresses of management using the MCC according to DELL:

  Step 1.  Initialize the storage

  * Once in the CMC right-click on storage open storage gui initialization.

  * Member name: MY_SAN01
  * Member, IP: 192.168.101.10
  * Member gateway: 192.168.101.254
  Group name: MY_SAN
  Group IP address: 192.168.101.11
  Group of Memebersip password: groupadmin
  * Password Admin group: groupadmin

  It sounds simple enough, and when I apply this I guess I will be disconnected my M4110x simply because it currently resides on a separate network (net 2 in the image above).  Now how to set up the IP address of my CMC (net0 in the picture above) network management?

  Step 2.  Set ip management port

  According to the documentation of Dell, I have:

  To set the management port:

  * Open a telnet (ssh) session on a computer or console that has access to the PS-M4110 range. The array must be configured beforehand.
   
  * Connect the PS-M4110 modules using the following racadm command: racadm Server 15 connect
   
  * Connect to the PS-M4110 array as grpadmin

  Once I am in:

  Activate the management controller ports using the following commands in the CLI:
  0 > member select MY_SAN01
  1. (array1) > eth select 1
  2. (array1 eth_1) > 10.10.10.17 ipaddress netmask 255.255.255.0
  3. (array1 eth_1) > upward
  4. (array1 eth_1) > exit
  5. (array1) > grpparams
  6. (array1 (grpparams)) > network management-ipaddress 10.10.10.17

  (array1 (grpparams)) > exit

  My interpretation is correct?  Now my questions:

  1. in step 2. SubStep 1 - How can I know what ethernet interface to use?  Step 1 automatically assume eth0?

  2. am I correct in using the same IP address for both step 2 - substep 2 and substep 6?  Or do I have to assign a different IP address for these?  10.10.10.18 maybe.

  3. step 2 - substep 6, it doesn't seem to be that a network mask is that correct?

  4. comparison of the ps6000e - I set up an IP address for each controller (so 2) and then assigned an IP address for the group.  It's 3 IP addresses.  For this M4110, it seems that I have only one controller.  Is this correct?  The specifications make a point that there are 2 controllers.  What happened to the IP address of the controller of the 2nd?

  CLOSE-UPS

  I intend on building a VMware cluster using the algorithm of multiple paths of DELL and I built it to the DSC, but a technician Dell put in place the table initially and have not set up a dedicated management port.  Required configuration routing traffic on the net iSCSI management.  It is not recommended, and I don't want to set up this way.

  Currently, he is a blocking problemand I need to go beyond this ASAP.  I work with a large system integrator in Texas and plan on the order that these systems built this way on their part.  This means that I must be able to explain to them how to proceed.  This issue is standing in the way of progress, and I really hope I can get a satisfactory response from this forum.  Thanks for any helpful answers.

  I think I have the answers to my own questions:

  1. YES.  Step 1 automatically assume eth0.  There are TWO Ethernet interfaces and eth1 is disabled by default, and unless you use step 2 to set the management port this second Ethernet interface is never used.

  2. No. I can't use the same IP address for both lines.  In lower level 6 I need to use a different IP address on the same network 10.10.10.18 would work fine.

  3. YES.  It is correct.  Lower level 6 assumes the network mask that I have included in the point 2.

  4. it's tricky.  There is NO WAY to configure Active/active on these tables.  There are 2 controllers, but one "still asleep," unless the other fails.  Actually, the IP address is assigned to an Abstraction Layer, it maintains.  When fails another controller "awakens" and just starting to accept traffic and it doesn't care what its IP address.

  Another point.  Now that my table is initialized and my interfaces are configured, I need to know what IP address to point my ESXi hosts for their storage.  Use the IP address of the group assigned in step 1.  It is 192.168.101.11 (there is typo in the original post).

• What device drivers OR are required to use the configurator with CompactRIO Profibus Master-Slave device?

  I'm trying to deploy the software driver for a portable production that will allow technicians to download configurations of profibus for CompactRIO profibus DP master-slave cards.  I know I need support VISA and MAX in order to communicate with the device when it is in Slot 1.

  I have a Windows XP computer I've used in the past for this and a 7 32-bit Windows development machine that can do as well.  I guess I would need OR-Rio installed and more MAX and VISA, but I run in RIO the right software to install on this machine.  Until I dig a hole more far than necessary can someone point me in the right direction of what is needed to install?

  My development platform is LabVIEW 2010 with SP1.  The development and the production laptop computer work all the two 32-bit Windows 7.  The development machine has the following (and other) software:

  LabVIEW 2010 (RT, FPGA modules) SP1

  MAX 5.3.3

  NI-VISA 5.2

  NOR-RIO 3.6

  We use Comsoft Configurator II 1.2.37

  All reviews are much appreciated!

  Matt,

  I understand the suggestion about Profibus shake appeal reviewer, but I never mentioned the module Profibus - only the NI Compact RIO driver software.

  Ryan,

  I checked that the key and it is present and correct.  Later during some additional tests, I'm done with several other installers throw similar messages.  I've seen CVIRTEDIR and MAXAFWDIR as well.

  I thought at this stage there was another really obscure registry entry who standing things upwards, so I tried to install it (s) even on another unit of the same configuration management.  Installed LabVIEW Runtime Engine 2010 SP1f5, NI-VISA 5.2 (included OR MAX 5.3) and NOR-RIO 3.6.1 and everything works well for use with Configurator II Version 1.2 (September 2011 version 1.09 interface Comsoft TCP sockets, includes LabVIEW 8.6 run time engine).

  In the past I could have resorted to the use of MSI-Blast to clean all the related registry NOR entered, but I couldn't get my hands on a copy and uninstall NOR has not removed the remains (it seems).

  Jason

• HP LaserJet M775z: Use the Configuration Options of another tray

  Hello

  I have a M775z configured to use another tray, so if an A4 tray is empty, the printer will engages since another A4 tray. Y at - it an option to specify what trays, this applies to the? I have A4 paper with the logo of the company in tray 2 and white A4 paper in tray 3 and tray 4. Y at - it can specify that the printer should only automatic selection of the tray 3 and 4 for the work of the A4 and do not consider tray 2?

  Thank you

  Florian

  Print requests used to select the status bar required by using a combination of paper size and Paper Type (with the value status bar selection Selection automatic printer), rather than choosing a specific tray through its identifier.

  Set up the printer so that he knows that there are different Types of paper in different 'sets' trays.

  For example, type = header for tray 2and type = Plain for trays 3 and 4.

• How can I use the configuration xml into native c + c++ file / qml

  I want to use a config file xml in my app.but I don't know what path should I place my xml file, and how to read it.how to get the path...

  of course, you can put the XML into your project. But why would you do that?

• Corrupted by using the Configurator in Photoshop CS5 key commands

  For me, when the control panel open lorsque le panneau de configuration ouvert commandes commands common keyboard for tools like the brush or tool room (one of them) is no longer working.  There is a brief pause, switch to the tool you want, and then it is up to the tool you were using.  Press and hold the button will keep visible, but let go and he returned to the tool you were using.

  This sucks quite like I grew very fond of Configurator.  It's a real time saver.  Too bad, they incorporate a range of customizable tools directly in Photoshop...

  But in any case, something wrong here seriously and I can't use Configurator 2.0.  If all goes well, there will be an update... but I won't hold my breath.

  Suggestions welcome... I created a special group from scratch, just to see if that would fix things upward.  There can be no.  I tried a panel without orders top keyboard (since that is what is being done) and that did nothing either.

  Lance

  There is a fix that works for Tom, and I would also send it to the spear.

  If anyone has the similar problem, please post your e-mail address here. I'll send you the fix.

  But I can't yet it replicated on my machine, so if anyone has some clues on what is the first cause, please let me know.

  Best regards

  ZhengPing Wang

• Using the Configurator in Win 7 64 bit

  The title says. It will work with 64-bit PS and Win 7?

  Referring to Adobe Configurator, then Yes, Configurator 2.0 is supposed to.