The configuration step of the calendar after the call to DAQm angular encoder, takes a lot of time vey even to 1000 samples per second. No idea why?

Similar Questions

• When I turn on my computer until the start menu is ready before I click on internet, it really takes a lot of time

  When I turn on my computer until the start menu is ready before I click on internet, it really takes a lot of time. Why?

  Hello

  Did you do last changes before the show?

  I would like the season you follow the steps in the link and check if that helps.

  Method 1: Perform a boot clean and chcek if it helps.

  How to configure Windows XP to start in a "clean boot" State

  Note: Once the diagnosis has been made, make sure you try the step to configure Windows to use a Normal startup state in the article in order to reset the computer as usual.
   
  Method 2: You can also check out the link and check if it helps.
  Advanced Troubleshooting for General startup problems in Windows XP

• Firefox has become very slow. It takes a lot of time to load any website. I reinstalled FF but the fleeting problem.

  Firefox has become very slow. It takes a lot of time to load any website. I reinstalled FF but the rest of the problem.
  As a test, I downloaded Chrome and it is much faster.
  But I love FF and would be very happy if you can help me solve this problem.

  Hi Reos,

  When you reinstall Firefox it always uses your old profile with all the old things that you had. That said, you're lucky, there is a new feature that lets you "Reset" of Firefox. This will remove some of the pieces that might cause problems while it keeps your bookmarks and other important things safe.

  Check it out and let me know if it works: Refresh Firefox – reset the parameters and modules

• My win 7 laptop HP takes a lot more time at the stop

  MY LAPTOP ABOUT 4 WEEKS IT Y HAS SUDDENLY STARTED TAKING AGES TO STOP

  CONFIGURATION SYSTEM USED IVE, DISK CLEANUP, DEFRAGMENTATION IT REGUALLY.

  CAN ANYONE ADVISOR AS TO WHETHER BACKGROUND PROGRAMS COULD BE INITIALLY - AND HOW DO I FIND AND REMOVE?

  MY LAPTOP RUNNING WINDOWS 7 HOME PREMIUM SUDDENLY TAKES A LOT OF TIME DOWN

  Here's one thing you can check which will give information in some cases: http://windows.microsoft.com/en-US/windows7/Why-wont-my-computer-turn-on-or-off-quickly

• External sample clock change takes a lot of time on the SMU-5186

  Hello

  I use the external Lv - niScope EX Clocking.vi example to define SMU-5186 using an external sample clock.  However, it takes a long time, 5-6 minutes, before I can get the first block of data acquisition.

  Then I run the example 'niScope EX Acquisition.vi Configured' to switch to dashboard clock. There are also 5 to 6 minutes on the first acquisition.

  I think maybe the SMU-5186 made some calibration when I change the source of the clock.

  Anyway is to ignore the calibration? Or make it faster?

  Thank you very much

  Yiming

  Yiming,

  Delays in acquisition are caused by calibration routines that must be performed on the engine to sample (ADC) every time that changes sampling rate.  This ensures our justified precision specifications.

  I don't know if you've noticed also calibration of Power-Up, which will take 5-10 minutes to complete when the unit is turned on.  This is mentioned in our specifications at page 18:

  http://www.NI.com/PDF/manuals/373257b.PDF#page=18

  I hope this helps.

  Nathan

• Firefox is very slow and takes a lot of time by opening a page. I have to move the cursor immediately after clicking on?

  Since then, yesterday evening firefox is not running at its normal pace. Initially, I thought that the problem comes from my laptop, but then I realized pages are open at normal speed in other browsers. Fireffox, I have to click and wait for the page to load. The page will not be charged unless that and until after clicking on remove the slider away!

  Upgrade your browser Firefox 8 and check

  • getfirefox.com

• Without LAN connection after logon applied credentils it takes a lot of time to load items on the desktop

  Original title: startup problem

  during the priming of the laptop without LAN connection after logon credentils applied it takes a long time to load the items on the desktop, but by connecting the laptop with LAN a boot of the computer LAPTOP, all right, please provide a solution for this problem of starting.

  Hello

  I removed IE 8, now it works fine

• New installation of 6.1 of the Horizon. It is normal that provisioning linked clones will take a lot of time?

  Hello

  First, I will describe my setup:

  1 Management Server: Dell PowerEdge R730 48 cores, 2.5 Ghz with 9 drive HARD 300 GB SAS 15 K (RAID 5) and 256 GB of RAM

  2 hosts VDI server: Dell PowerEdge R730 48 cores, 2.5 Ghz with 9 drive HARD 300 GB SAS 15 K (RAID 5) + 1 SSD 200 GB, 256 GB of RAM, 2 K1 grid cards

  1 unit number logic on a Dell Equallogic PS6110X (750 GB) where I put the masters.

  1 switch Dell N4032F (10 GB)

  All the server has 4 10 GB ports configured with NPAR (so, I have virtual network card of 6 x 10 GB for storage and 6 virtual network adapter for the network of the VM) and 2-port 1 GB for the management.

  My master: Windows 7 SP1 x 86 optimized with 24 GB HDD Thin-Provisionned (2 vCPU 2 GB of RAM, 3 VMXNET network Card). There is no application has added to this master.

  I can't ask the Microsoft VMXNET 3 fix because it is said that this patch is not applicable.

  I have no VSAN because that only 2 VDI hosts, so I set up my stock for each guest with local storage for the linked clones and SSD local for the replica.

  When I run the provisioning of the office pool (17 VM):

  The clone of the replica (Equallogic == > local SSD) aura 2'30 "... It's good for me (113 MB / s... the Equallogic is also used for another another LUN storage server)

  But the rest of the entire operation completes the provisioning will take 40'.

  More than 50% of carrots is around 100% of the CPU on the host.

  I tried to change my (9 disc hard + 1 spare) RAID5 to RAID10 (10 HDD). It will take 50'.

  And, when all of the operations are completed. I have 2 or 3 VM with the message: Agent unreachable and 1 or 2 crashes on the provisioning.

  One recompose your desktop one VM will take about 1'30.

  My question: it is normal that commissioning will take so much time?

  And another question: when I'm connected to a virtual desktop computer with customer Horizon during a pool commissioning, the freezing of the VM or I can't just plug. Although I Office ready. And sometimes, vCenter client will freeze to a large number of seconds during deployment

  Have someone idea?

  PS: Sorry for my approximate English ;-)

  Solution: I replaced the lsi_mr3 of storage vmware with the driver megaraid_perc9 driver.

  Thanks to ddewire for his help.

• When I click on a link that opens a new window, it takes an unusual long time to open. (16 to 20 seconds). Even with the opening of Firefox when I turn on my laptop.

  Once it is open, it works fine. I can move the document or page without any problems, it's just the opening. This does not happen when it opens a new tab. Only, when it opens a new popup page. Same thing with Firefox from opening in the morning. I did the same process in IE and has not had the same problem.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Also, make sure that your security software is blocking windows (pop-up).

• Application Builder takes a lot of time and the Popup messages during construction

  Hi all

  My request is slightly larger with over 300 of VI. Between the build process that I receive pop-up messages requesting files from the library GMath etc... are changes u want to save the files... ? When you click on OK button it starts to save these files of the library and when he saves nearly half the number of files in the grave application builder fails and causes LabVIEW close. As the build process takes more than 2 hours and the final result is always a unsuccessful construction due to the accident of application builder I am wasting my time.

  Kind regards

  Pavan

  Here's what I'd do:

  • Open the main VI
  • Press Ctrl + Shift + Run to recompile all the screws in memory
  • Wait until the end
  • Save all the

  If there is, repeat for each dynamic called screw

• Why for the last 3 days am I get the update of windows to shut down & boot-up/it takes a lot of time to complete their/TI is aqnnoying!

  I have windows7 home premium - when I stopped, I get updates - then I get them back to the start-up/it happens each time for the last 2 or 3 days-i use my computer toshiba laptop throughout the day and don't ever started day avant-ce that goes? There are unusually long for downloads to update?

  See this discussion: http://answers.microsoft.com/thread/cac55bf2-e271-e011-8dfc-68b599b31bf5 (which now includes a countless number of threads merged to confuse you more).

• Call to videoControl.getSnapshot (encoding) takes 5 seconds on the torch

  Hello

  I have an application that integrates the camera via the api. The initialization of the camera and preview are fast. When I click on the ball control or touchscreen I run the code:

  JPEG Byte [] = _videoControl.getSnapshot (encoding);

  The torch, it takes about 5 seconds for the camera to focus and take the picture which is the way to slow down. The internal application of the device does not work quickly. When I click to take a picture, it is immediately taken. Why is the api so slow. I tried to add parameters during initialization of the camera, but without effect:

  Let me try this on my torch and get back to you tomorrow... I just wanted to report that it is for a few days and I have been absent due to a long weekend here.

  The version you are using does not contain the patch that I mentioned, so I would like to confirm if the problem you see is the bug I mentioned and if that fixes the problem, and we can go from there.

• Full analysis takes a lot of time on the computer.

  Original title: full scan time.

  My computer time to complete sweep of Windows 7 laptop significantly increased about 8 hours to 22 hours +.  The analysis of 22 + hours has detected 4/5 days there is the Urausy.C Trojan horse, then the scan is effective, but, it's confusing to a layman, why it now takes a much longer period?

  My computer time to complete sweep of Windows 7 laptop significantly increased about 8 hours to 22 hours +.  The analysis of 22 + hours has detected 4/5 days there is the Urausy.C Trojan horse, then the scan is effective, but, it's confusing to a layman, why it now takes a much longer period?

  (1) this may be possible if you have much smaller small files to scan, regardless of the small capacity...

  ) (2) and the next thing is perhaps due to the limitation of physical resources such as ram memory / capacity for he malware program of digitization of treatment...

  (3) active and/or aware malware to the system files...

• When I copy the original document in Illustrator CS6 in Illustrator CC parts of the dough of document beyond their position. I have attached the images below. I have to go to each article and make a compound path that takes a lot of time. Help, please.

  

  Please apply the latest patch 19.1 this should solve your problem.

  -Ashutosh

• Importing Configuration takes a lot of time

  Hello
  
  If I am importing configuration using the xml file, it takes more than half an hour.
  can we it fast?
  
  Sometimes I have observed, this is a failure in this import.
  
  Kind regards
  Françoise

  Hi Pierre,.

  You want to purge the configuration? If Yes, then for the purge of any configuration-

  1. run the command setenv file
  2 run the command 'java oracle.tip.repos.purge.PurgeManager purgeAll.

  For the purge of unique configuration, try to provide the configuration name.

  For the purge of affairs and thread messages please follow-

  http://www.Oracle.com/technology/products/integration/B2B/PDF/B2B_TN_017_Purge_Utility.PDF

  Message status (Complete, error, etc.) should be given as an argument to 'MessageState.

  Kind regards
  Anuj