Toggle NetworkInterface via command line
Hi guys,.
Someone here who could point me to a resource or a command line instruction to disable a network interface in Windows 7? Your help would be very appreciated. Thanks in advance!
EM
This should do it:
netsh interface set interface name = 'Connection to the Local network' admin = off
Change the name of real network connection if it isn't connecting to the Local network.
Boulder computer Maven
Most Microsoft Valuable Professional
Tags: Windows
Similar Questions
-
How to set address static IP for cisco APS to the controller via command line
Hello
in our project it 208 APS registered in a WISN-1 controller
How do I assign a static ip address to this Aps via command line in a controller 4404
Thanks to the Internet, it takes more time to assign the static ip address
You don't mention what version of the code, you are on but on 7.0:
ap static IP config activate
You can also add
ap static IP config add domain
ap static IP config add nameserver
-
Rebuild the indexes to search for Windows 7 via command line
My search index is constantly becomes corrupted and will have problems, looking for things in Outlook. The only way I can make it work temporarily is rebuilt the index and it goes for a week or two before she starts to have problems again.
Is it possible that I can have research rebuilt via command line so that I can put in a batch file and schedule it to run?
off @echo
net stop wsearch
del "% programdata%\microsoft\search\data\applications\windows\Windows.edb.bak".
move "% programdata%\microsoft\search\data\applications\windows\Windows.edb" "% programdata%\microsoft\search\data\applications\windows\Windows.edb.bak".
net start wsearch -
steps to upgrade host ESXi ESX5.1 to 5.5 via command line
Dear team,
I m planning to improve my esxi5.1 to 5.5 via command line, need your help how to make the same success.
concerning
Mr. VMware
I found that it is useful for my case.
http://www.vmwarearena.com/2013/10/vSphere-55-upgrade-to-ESXi-55-via.html
-
402 error when installing an extension via command line
When I try to install my extension via command line, I get the following error message:
"Cannot install, status =-402!
What means this error-402 code?
I found someone with a similar problem in the forums:
It had file names containing non-ASCII characters. But I couldn't find any non-ASCII characters in my project or extension.
Thanks in advance,
Andreas
Hi Andreas,
I checked your ZXP file, and although his signature appears to be valid and correct, it is not time stamped. This means that when the signing certificate expires (which is in less than 3 years), signature of your ZXP will cease to be valid and your extension will not be able to be loaded. I think this is the reason for validation of signature issues.
Can you please try to re-sign your ZXP by adding "tsa - https://timestamp.geotrust.com/tsa" to your order of signature?
for example
ZXPSignCmd-sign my_product my_product.zxp cert.p12 password - ASD https://timestamp.geotrust.com/tsa
(This should be possible with either ZXPSignCmd for CC + or UCF.jar for CS6 +)
Your product also seems to be a hybrid extension - with a packed inside another ZXP ZXP. So please make sure that the internal ZXP joint is also signed and timestamped this way.
If this does not resolve the problem, please let us know of your stamped ZXP and I'll take another look.
Best regards
Fraser
-
Deploy the model via command line
Hi all,
Is possible the deply a model via command line and set hostname and network?
Thanks for your help
PS: Do not forget a gift for the ghetto script repository
You try to create a model of an existing VM using the CLI or the cloning of a virtual machine from a template?
=========================================================================
William Lam
VMware vExpert 2009,2010
VMware VCP3, 4
VMware VCAP4-DCA
VMware scripts and resources at: http://www.virtuallyghetto.com/
Introduction to the vMA (tips/tricks)
Getting started with vSphere SDK for Perl
VMware Code Central - Scripts/code samples for developers and administrators
If you find this information useful, please give points to "correct" or "useful".
-
compare two PDFs using acrobat to adobe via command line
Does anyone know how to compare two PDFs using acrobat to adobe via command line. I want to do this via command line, because we want to compare hundreds of files each day through some automated tasks in windows.
If the command line option is not available in acrobat format, then it is possible to use acrobat javascript API to perform this task?
Any kind of help will be greatly.
Command line: not possible.
JavaScript: Possible, but very limited. Basically, the only thing you can do is simulate the clicking Compare Documents. The rest must be done manually.
However, it * might * be possible to automate this process a bit more using a plugin. Ask for more at the Acrobat SDK forum for more information...
-
How can I remove Lotus Notes PDFMaker plugin via command line?
How can I remove the plugin from PDFMaker lotus notes via command line? I initially deployed Adobe Acrobat 10 as a full install on multiple computers. I see how to remove this specific feature through the user interface in Windows 7 by going to Control Panel / programs and features / Adobe Acrobat X / change / modify / create adobe PDF / acrobat PDFMaker / Lotus Notes, but it would be a tedious task to do manually on each computer. I've experimented with a few msiexec commands after removing Acrobat such as:
msiexec /i "\\path in msi" remove = pdfmakerforlotusnotes
&
msiexec /i '\\path in msi' disable_pdfmaker = yes
The two still install acrobat as a full install. Any help and suggestions would be appreciated. Thank you!
Try to use the correct case: PDFMakerForLotusNotes
-
Adobe Reader 11 (XI) will not open the file via command line
Hello
I posted this question
, so I am repeating again.I installed the new Adobe Reader XI today and when I tried to open some PDFs via command line, it reported a syntax error. Now, this syntax worked so far on versions 9 and 10 (I checked today with them and it does not), so my question is - where can I find new syntax, if there are? Google search did not help. Or what else could go wrong?
In previous versions, I was able to open the pdf file (on page 5) like this (everything was taken from the help file 'Open settings')
«Page "/A" CompletePathToAdobeReader = "CompletePathToPDF", 5"»
That is to say
"C:\Program Files (x 86) \Adobe\Reader.
but now - not that it opens a specific page, but it won't open the file at all.
Edit:
Operating systems: Windows 7, Windows XP
Thank you.
Post edited by: v604
Yes, he has correctly reported because there is a syntax error in your order. Try spaces between the /A switch and open the setting. Try this:
"C:\Program Files (x 86) \Adobe\Reader" /A "page = 5" "d:\V2\DataSheet.pdf" "."
I hope this helps.
Sumit-
-
How to search in a pdf via command line package
How can I search a specific PDF file within a PDF batch via command line? Previously, I used the following code in VB6 to find a unique PDF file successfully.
acroPath = String (128, "") ' initialize the string
resultStatus = FindExecutable (pdfPath, vbNullString, acroPath)
acroPath = Replace (acroPath, vbNullChar, "") "get rid of the null character
«acroPath = "" "" & Trim$ (acroPath) & "»
cmdLineString = acroPath & "/ n/a" "search =" "& searchString &" "" "" & pdfPath
Call the Shell (cmdLineString, constant vbNormalFocus)
I now get this file in a PDF package, so how can I change the command line to search for the specific package file?
I understand that I can not use OLE with just the drive nor the DDE as the search function is not exposed in the drive. So I find myself with the command line.
I only have Acrobat Reader blown on Win XP SP2, not the full version of Acrobat 8.1.
SAV
No fix - no command line option.
And Yes, you're right about OLE and DDE.
-
How to add a license via command line for C60 key
Could someone remind me what the command would be to add a license key via the command line interface? I want to downgrade the software and it was initially delivered with version TC7.
Hello Douglas.
Here are the commands:
xCommand SystemUnit OptionKey Add Key(r):
xCommand SystemUnit ReleaseKey Add Key(r):
You can also enter them via the web interface by going to the maintenance > Software Upgrade.
-
Outline Extractor Olap performance via command line fails
HelloI want to run the extractor of Olap outline via a command line. I created a file with the GUI .properties. I can launch the GUI very well and everything works.
Now I want to start this a scheduled task and it does not work with "the main class is not found: com.appliedolap.olapunderground.essbase.outline.extractor.ui.ExtractorFrame." Program will exit.
The command is:
D:\apps\olap-outline-extractor\olapunderground-outline-Extractor.cmd-PROPRIETES \\adev99\epmsess$\data\_production\otl\ACT\ACTLoadFile.properties
The location where the Starter is on D:\Programs\Informatica
It has to do with the java classes and the path, but I do not understand to work.
Thanks in advance for your help.
Kind regards
Philip Hulsebosch.
He must find olapunderground-contour - extractor.jar, which is in the same directory as the utility, what I'd like to try editing olapunderground-contour - extractor.cmd and try
: runGui
% _JEXEC % - jar d:\apps\olap-outline-extractor\olapunderground-outline-extractor.jar-proprietes \\adev99\epmsess$\data\_production\otl\ACT\ACTLoadFile.properties
The rest of the java classes required seem to be in the lib directory and not the directory of classes.
And maybe add to be sure
Set CLASSPATH=D:\apps\olap-outline-extractor\lib;D:\apps\olap-outline-extractor\classes;%CLASSPATH%
or just start in the right directory
See you soon
John
-
Java ME 8 b54: impossible to deploy MidLets on RaPi via command line
Hello!
I'm trying to deploy a moped to demo on my Raspberry PI for awhile, always running into the same error.
Everything works fine via Netbeans (RaPi connected in DeviceManager, deployment through 'Run').
No matter if I try to install directly from the LPR (installMidlet.sh) or remotely (DeveloperAgent, usertest.sh $ ams-install), I always get the same answer:
PI@raspberrypi ~/jmee-8-0-ea2-b54/bin $./installMidlet.sh /home/pi/midlets/app1.jar
argv [1] = runMidlet
argv [2] = + UseProxy
argv [3] == VMAgentBufferSize4000
argv [4] = - 1
argv [5] = com.sun.midp.scriptutil.CommandLineInstaller
argv [6] = I
argv [7] = /home/pi/midlets/app1.jar
[INFO] [CORE] iso = 0:javanotify_start_java_with_arbitrary_args() > >
[INFO] [CORE] iso = 0:JavaTask() JAVATASK_EVENT_START_ARBITRARY_ARG > >
[Java begins. Press Ctrl-C to exit
INFO] [STORAGE] iso = 0:opening for read only/home/pi/jmee-8-0-ai2-b54/bin /... /appdb/ams_params.txt
[INFO] [CORE] iso = 0:initialize resource limit
[INFO] ISO [CORE] = 0:RESOURCES [0] midpCheckResourceLimit (3, 1)
[INFO] [STORAGE] iso = 0:storage_open allocated file_desc 0
[INFO] [SECURITY] iso = 1:Loading blacklisted clients file/home/pi/jmee-8-0-ai2-b54/bin /... /appdb/blacklist_clients.txt
[WARNING] [SECURITY] iso = 1: cannot load the blacklist of client file/home/pi/jmee-8-0-ai2-b54/bin /... /appdb/blacklist_clients.txt
[INFO] [SECURITY] iso = 1:Loading blacklisted apps file/home/pi/jmee-8-0-ai2-b54/bin /... /appdb/blacklist_apps.txt
[WARNING] [SECURITY] iso = 1: failed to load the application blacklist file/home/pi/jmee-8-0-ai2-b54/bin /... /appdb/blacklist_apps.txt
[INFO] [SECURITY] iso = 1:BlacklistServer: listening to queue has started
The following Setup error: null
java.lang.NullPointerException
-com/sun/midp/installer/Installer.rebindSuites (), bci = 1
-com/sun/midp/installer/Installer.installStep6 (), bci = 417
-com/sun/midp/installer/Installer.performInstall (), bci = 132
-com/sun/midp/installer/Installer.install (), bci = 65
-com/sun/midp/scriptutil/CommandLineInstaller.run (), bci = 231
-java/lang/Thread.run (), bci = 5
next suite for run 0 null
[ERROR] ISO [CORE] = detection of 1:Device service failed: java.io.InterruptedIOException: Socket closed
[ERROR] [AMS] iso = 0:java_input_forwared: no subscribed channel = 8
I tried several alternatives for the URL of the file (direct, file:// path, http://), still the same error.
Can someone explain the difference between the behavior of the command line and NetBeans? I tried on Windows and MAC, no difference.
Anyone who manages to run an installation without NetBeans?
Thank you very much
Andi
Hey Andi,
Sorry, it's called problem. To make the things work on this binary install you .jad .jar directly not through the file. (i.e.:./installMidlet.sh /home/pi/midlets/app1.jad). Please note that the MIDlet-Jar-URL in the file .jad should point to .jar, such that he's seen raspberry pi (that is, you can use the local path if you use installMidlet.sh or put the .jar file in the local file system and using an absolute path in the MIDlet-Jar-URL when installing the Agent developer console). Also you can use the hostdownload to install-ams command parameter. In this case the MIDlet-Jar-URL must use host paths because the .jar is downloaded by Developer Agent in this case
The problem is resolved and you should be able to use .jar installation once next developer version published on OTN
Kind regards
Andrey
-
Export to .txt via command line
Hey everybody,
I wonder if it is possible to use Adobe Reader to export to a file .txt via the command line? I know that I can do through the program, but I'm willing to do without opening Adobe Reader.
I found third party programs that will do it for me, but it exports in a different style to Adobe Reader (e.g. text appears on different lines).
I hope that makes sense! I appreciate any help that someone is able to offer!
Thank you
Dominic care
No, not possible.
-
Manually configure the listener apex via command line
I would like to be able to configure the listener apex via the command line.
Is there an api or method to achieve this?
Is it possible to take an apex-config. XML as a template and make changes to this environment and place it in the config.dir directory
According to me, placing a! in front of the clear text password cryptera apex listener reboot?
Is the method of model above a taken way in charge of the configuration of the apex listener script languages?I set the value of config.dir for
/apex_lsnr
This will search the apex - config.xml in the directory above or it will search the XML in/apex_lsnr/apex? +
/apex_lsnr + would be option 1 - who doesn'work currently. +
+ refers to the 'context' you have deployed your APEX listener, so if you used the default value (apex) this would actually
+/apex_lsnr/apex +. -Online cp apex - config.xml $DOMAIN_HOME/apex_lsnr/apex
Note that APEX auditor records the location of the apex - config.xml, he uses actually started. If it comes to the temporary location (default), he found nothing in your configured directory.
-Udo
Maybe you are looking for
-
UK sim free iPhone could not used in Germany
Hi guys. it a sad stor I think. I bought an iPhone sim-free SE to the United Kingdom last month, it's a gift for my girlfrien studying German. For this purpose, I have open but today when I give it, we discovered that there is only the card SIM of th
-
Messages crashing upward on the opening
Can someone help me with this? All of a sudden in the middle of writing a message to someone, it bombed. I have rebooted, repaired permissions, nothing seems to work. Splashing around in the console, I thought I saw a conflict with DirectFolderX, so
-
What is the 8007001F error code
I just got my computer from being repaired, they had to remove a virus from the root, which they did by cleaning up my hard drive. I have to start at zero all install again. Yet I can't update Windows, he always tells me to install an update for Wind
-
Since Tuesday, June 14, I was unable to get a response when I search the updates of windows 7 or updates for MS security essentials. Is there a problem with the download system?
-
Update of the software of blackBerry Smartphones keeps freezing
I have a Blackberry Bold 9700 and I try to update the software of 5.0.0.54 5 5.0.0.86 2. Whenever I try to do that it freezes at "downloaded modules 540 534. Initially, I left the Blackberry at night (about 10 hours) and nothing happened, it was sti