Toner cartridges HP LaserJet M1132 not delivering full capacity

Similar Questions

• "The HP LaserJet 1020 has the open front door or the toner cartridge is missing." Not true

  I'm going to print something and the troublescreen said: The HP LaserJet 1020 has the open front door or the toner cartridge is missing. But the door is closed and the cartridge is fine. I put a new in after the message started appearing thinking that the low level of ink was casusing the change. I suspect a mechanical switch is kaput, but do not want to enter the machine. All the switches look and feel like they are working normally.

  This little machine of love, it's a real workhorse, simple and effective.  I use a laptop Samsung with Windows 7 and my actions joint the printer using a Toshiba PC. We both get the same response from our little hp... todius

  I will now let you know that we have done to resolve this.  My wife has stuck a pencil in the slot of reception for the closed cover pin located on the corner left front of the top cover. She shook it until she was able to close the lid and printing. He now works as it always has.

  Babe thank you... todius

• XPS 8700 RAM upgrade - do not use full capacity

  I decided to get max out my RAM on my XPS 8700 to 32 GB. After booting, I am only using one half of the total. I checked the system settings to see if there is something that needs to be defined, but I don't see anything that will help.

  Is there a material DIM switch or something of RAM is correctly adjusted? I looked in the user guide but cannot see how to swap the RAM modules.

  If you have windows 7 home, your authorized max is memory 16 GB.  If you have Pro, you can go up to 192 GB.  Windows 8 and higher increased the memory limit.

  If it does not, you may have some bad RAM.

• Hard drive not showing do not full capacity after reinstalling win 7

  I just reinstalled windows 7 and have just noticed that my hard drive I do not show full capacity. After installation, it is show that C & D drives with Windows installed on D. When I tried to copy my music from my backup library he said that there was not enough memory. SRE enough checking properties of the drive see drive capacity C 97.6 GB and D as 12.1 GB drive. The hard drive is supposed to be a terrabyte and it was OK was before I reinstalled Win 7...

  Hi Mick,

  You can expand the C partition in "unallocated space" as follows.

  Once more, hold down the Windows key and press R.  In the run box, type compmgmt.msc , and then press ENTER.  Click disk management in the left pane and let readers load upward.

  In the lower graphic view of the partitions, right-click on the C partition and select "Extend Volume".

  In the next window, click Next.

  In the next window, use the "select the amount of space in MB" make sure it shows the same number as the number of 'Space available Maximum in MB' which is registered just above (adjust if necessary).

  Click Next, then click Finish.

  It may take a few minutes to complete.

  Kind regards

  DP - K

• HP LaserJet P1102 CE651A does not recognize the new toner cartridge

  I installed a new hp for my Laserjet P1102 toner cartridge, but still get the message "install the black print cartridge"and the orange light blinks.  It worked fine until the toner ran out.  Have tried to reinstall the cartridge and you are using a compatible cartridge, without success.  Can I do, or do I have to repair the printer that appears to be a case to send far from a reconditioned unit?  I am disappointed that he didn't after intermittent use of less than 18 months. It was purchased as the reviews said it would be great for printing of volume, but I have not at this stage yet.

  Any ideas?

  I had the same problem. Remove all paper from the tray. Make sure that no paper is started in the printer. I then replaced the toner cartridge and it was recognized. It seems that if the paper is launched to feed into the printer, then the new toner is not recognized.

• Quality of rpint HP Laserjet color faded to the right of the page, toner cartridge the culprit

  Thus, a resolute quirk.

  My HP Laserjet 3800dtn produced pages in which the colors are washed out or did not go to the right margin.  Various associated software HP print diagnostic and diagnostics pages feel integrated, product pages with the same problem.  The colors on the right do not appear, but the black characters, text, graphic appears.

  At first, I thought it was the length of the USB cable, so I went to an Ethernet connection and run all the tests again and got the same results.

  So I took one of the toner cartridges and replaced by a new.  The same problem.  Then, and what a weird coincidence, I discovered that there are two somewhat 'heavy duty' springs on each side of the toner cartridge that works with the door (shadow) on the roller.   One of the springs was detached.  But it just not a not dislodge, because the position whereby the spring attached (a little nub) is broken.

  My conclusion is that the door opened only partially, and therefore the toner is never properly transferred to one side.

  Maybe I broke the node with some brutal manipulations, maybe a new one was defective, that it is I got two defective cartridges.

  However, not wanting to throw a + $100 cartridge, I stuck the spring and post and allowed him to dry overnight.

  Reinserted the fixed cartridge and everything of fine.

  Just sharing.

  An update more.

  Among the repaired 'bumps' failed.

  So I heated a thin nail, and he passed through the plastic in the area where the 'essential' existed.

  The, using fine wires, I threaded the wire through the hole of very small diameter and attached to spring for the plastic.

  Yes, success... another cartridge saved from an ignominious early elimination.

• Color LaserJet 2605dn: changing the toner cartridge guaranteed?

  Can someone help me to replace what seems to be a faulty cartridge? I could find absolutely no information on how to do it on HP's Support website to the regular address.

  Q6003A magenta toner cartridge prints very light. Looks pink instead of magenta. This is true even on the 'Page State supplies", which shows the level of toner to 74%: Pages printed with this power supply: 418; Rest of approximate Pages: 1189. I have 'shaken gently"the magenta cartridge without result, and I see no flaws on the drum. 'Cleaning' running mode did not help; He only printed black. The other three cartridges all show them a solid color, so I deduce that there is a problem with the magenta cartridge itself.

  See below. The title and the area around it are supposed to be "Purple"; There should be a (not complete magenta) rose "2605dn" to the right of the printer "HP Color LaserJet.

  Any suggestions as to how to get this replaced would be greatly appreciated.

  

  You do not have a faulty cartridge, you have a dusty mirror in scanner Assembly laser.

  You will find the instructions on how to disassemble the printer and clean the mirror through various sources online and probably even in the forums.

  The index that identifies your problem is melted magenta from left to right.

  If you decide to take the machine apart and clean the flat mirror handle cables very gently then reconnect the very carefully.

• The LaserJet 8000 and 8100 share toner cartridges?

  Hey people.

  I'm not at home, and I'm sure I have a LaserJet 8000, but everything I buy at HP are 8100 cartridges... Anyone know if they fit on both models? I got three bad cartridges to eBay, and I'm sick of it.

  Thank you!

  I don't think they use the same toner cartridges.

  8000 uses: HP 09a C3909A

  8100 uses: HP 82 x C4182X

  I hope this helps.

• How do I know what toner cartridge for HP Color Laserjet CP1215?

  I have the HP Color Laserjet CP1215 printer. The vehicle currently has the following four toner cartridges.

  CB540A - black

  CB541A - Cyan

  CB542A - yellow

  CB543A - Magenta

  Trying to find replacement for the printer cartridges, I see several different cartridges options, such as the CC531A, CC533A, 124, etc.. So my questions are?

  1. What are the different types of cartridge available for HP Color Laserjet CP1215?

  2. make the serial numbers indicare or say anything?

  3 HP has a number where I can call and buy cartridges of.

  The correct cartridges for your printer is located in the HP SureSupply Site.  You can also order on this site, in the United States there free shipping next day company.  It appears for your printer you should of 125A cartridges, your post numbers are compatible with those contained in the SureSupply site.

• LaserJet M1132: LaserJet M1132 deleted and could not be installed after update latest version 10 of Windows!

  3 days ago 10 Windows installed in my computer suddenly updated. After the update and reboot my PC, Wndows 10 deleted my laserjet m1132 system completely! And now I can't install it again, cause Windows 10 says that my printer driver is 'suspect' and it will be disabled instalation! Auto-detection of the companions of the local HPSupport site do see no printer connected to my PC completely! And PC does not say that all the new devices were connected. WHAT SHOULD I DO?

  Hey @fliperUA,

  Welcome to the HP forums!

  I see that your Laserjet M1132 will not be installed on your PC Windows 10. I can help with that.

  To install the drivers, we will do the following:

  1. If you have the USB cable connecting the printer to your computer, then remove it.
  2. Uninstall all the software your system associated with the printer.
  3. Disable all firewalls, antivirus, ad-blockers and similar programs on your PC.
  4. Download the latest drivers for your printer by clicking on this link.
  5. If the installer asks you to insert the USB cable then plug the cable at the time.

  This should allow you to install the drivers for your printer. If it does not then please let me know what error messages you see now and I should be able to help more.

  I hope this helps and I hope you have a great week!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• Habs No. 57 toner cartridge not accepted

  I bought a toner cartridge combo-pack that had 2 No. 56 and no. 1, 57 for all-in-one printer, HP Officejet 5610.  The printer will not accept the No. 57.  It's an upgrade to the printer driver that will allow the No. 57, which is an extra version of the cartridge three-color n ° 22?

  You will need to know as soon as POSSIBLE.  Thank you!

  Unfortunately the 5610 JO only accepts color HP22 or 22xl cartridges (more information on the compatibility of the cartridge to SureSupply)
  You can try to return it to the store?
  Ciara

• HP Laserjet M1132: Laserjet M1132 - is not printing

  Hello.

  Well, my printer scan correctly (in photoshop either), copy correctly.

  Problem: it's not printing from Windows.

  I have a sweet Wiindows (7 and 8 on laptop - same trouble)

  I connect printer - and nothing happens. Peviously printer created a virtual disk with the drivers and all was ok. Two last moments where he didn't.

  I reinstalled windows 7 spesially for delete a problem, because I need printer more then my progs on old Win game. Nothing happened when I connected (printer)

  I can still scan and copy, I can send to print docs in WORD for HP Laserjet M1132 - but that's all. It adds the queue and does not actually print. And some time later said "error - printing".

  Tried to put in place the new drivers, to find trouble with Win 7 troubleshooting - nothing helped.

  Doctor of HP, new drivers and disabling Win Firewall did not help.

  Adjustment of its CD drivers did not help - it is not at all a device.

  (Russia) screenshots: screen 1 , screen 2

  I installed it with "I'll connect printer later," restarted. Nothing.

  All my attempts to print a Windows test page, HP programs did not, as my camera is totally in depth.

  Printer repair center - they said that everything is ok, the printer works from Windows (Photo test page). But they are not programmers, so they won't help = |

  Somebody help...

  Installation on another port USB (3.0) has solved a problem

  Controller wrote an error, so we checked out another port

• HP LaserJet M1132 MFP prints not a remote desktop

  Hello

  I have a MFP HP LaserJet M1132 (number of product CE847A) connected to a PC (MS Windows XP Home Edition + SP3) via the USB port. There is no problem with the printer. However, when using Remote Desktop connection (it is set to use the resources and local facilities, or in my case, printers and ports series) on the server (MS Windows Server 2008 R2), I can't even print a test of a remote office page.

  Error message: "print a test page failed. You want to display a tool to solve printing problems to get help? »

  But it does not anywhere as planned is access to the internet, and I've not had a MS Windows Server 2008 R2.
  The same error is for the HP LaserJet M1120n MFP.

  On my PC I installed another printer - old OKI ML321 (needle) connected to a PC using LPT cable and network printer Konica Minolta 1690MF (in another room). In two of these printers can easily print a test of a remote office page.

  Please help me.

  Thank you for your interest.
  The situation is a little different from the image. Windows Server 2008 R2 is available across the WAN. LAN is connected to the PC-1, 2 - PC and printer Konica Minolta. HP LaserJet M1120n MFP is connected through the USB port of the PC-1. OKI ML 3320 printer is connected via LPT also to the PC-1. PC - 1 has access to Konica Minolta printer via the local network. PC - 2 also has access to Konica Minolta printer via the local network. PC - 2 is also available for PC-1 HP and OKI.

  It seems to me that I found the explanation for printing problems - some of 'my' printers are simply not compatible with Windows Server 2008 R2. I found on the net the following information:

  http://www.windowsservercatalog.com/item.aspx?idItem=cdde267a-800D-2d9f-1f0c-225cabd6838e&bCatID=1282
  http://www.windowsservercatalog.com/item.aspx?idItem=31df9819-ca52-4684-dc3b-8e31b70c77d7&bCatID=1282
  http://www.windowsservercatalog.com/item.aspx?idItem=6475235d-8DBB-9e95-11dc-3575d569acc2&bCatID=1282
  http://www.windowsservercatalog.com/item.aspx?idItem=59731747-9976-8D51-DCBB-7664cbc17a89&bCatID=1282

  I think I can close the topic.

  (translated from Polish into English using Google translator)

• HP Laserjet 2605dn - cannot remove toner cartridges

  I can't remove the ink of my printer HP Laserjet 2605dn (LJ2605dn). They seem to be stuck on the right side. I already changed the toner on this printer cartridges.

  I also have a Laserjet 2600, which uses the same toner cartridges and they are easy to remove and replace.

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a printer. You can do to Printers - LaserJet. Click new message.

  I hope this helps.

• HP Color Laserjet MFP m277 Pro: can I put my old toner cartridge to finish?

  I hope it's a simple question.

  We changed the toner Cyan on the printer cartridge until it was over. There was a problem and we thought he meant that the cartridge is empty. The problem turned out to be something else. So now, I have a cartridge that is perhaps used three quarters and a new in printing.

  Question: when the CURRENT one runs out, I can put the previous again in the printer to use, without causing any problems for the printer?

  Thanks for any advice.

  Yes, you can put a Toner Cartridge used back with no problem, the printer may indicate its levels of toner correctly, but it can be used without any problem.

  Kind regards

  Shlomi