Habs No. 57 toner cartridge not accepted

I bought a toner cartridge combo-pack that had 2 No. 56 and no. 1, 57 for all-in-one printer, HP Officejet 5610.  The printer will not accept the No. 57.  It's an upgrade to the printer driver that will allow the No. 57, which is an extra version of the cartridge three-color n ° 22?

You will need to know as soon as POSSIBLE.  Thank you!

Unfortunately the 5610 JO only accepts color HP22 or 22xl cartridges (more information on the compatibility of the cartridge to SureSupply)
You can try to return it to the store?
Ciara

Tags: HP Printers

Similar Questions

  • LaserJet P1102W will not accept a new black cartridge

    I have a Laserjet P1102W coming out of warranty of 16 days. It won't let me print as it calls for a new black cartridge which I changed to a new one and it still won't let me print. I have tried the factory reset and it still does not work.

    Any suggestions to make it work please.

    Hello

    Remove the toner cartridge from the printer and on the left inside of the printer where the toner cartridge,

    There is a sensor vertical flag that triggers and detects the toner cartridge when its inserted...

    Make sure the sensor is freely switch also check the obstacles inside the area of the cartridge...

    to clean the contacts inside the printer and the toner cartridge...

    even if I am an employee of HP, I speak for myself and not for HP.

    * Say thank you by clicking on the "Bravo!" Star"located on the left *.
    Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your problem.

  • Do not accept HP ink cartridge

    My F4180 all-in-one printer will not accept a new HP ink cartridge. I only use HP cartridges. The computer gives me the message that my cartridge is defective or incompatible with my printer.

    Clara_B wrote: Hi, ptr613, 5520 PS did you get an error saying something like the cartridges of the older generation?

    Hi Clara_B thank you for your message. No, the message, Word for Word, was ' the printer is in the next error state: ink cartridges HP no approved. " He couldn't be a cartridge older generation it was only a month or two old, and had worked perfectly in my original HP5520 printer. Contacts look clean and sparkling. Printed on the label expiry date is 2014/11. In any case my previous post was written in a moment of intense frustration. The printer works fine now with the new cartridge except that he often gives a "paper" message even when the bin is full. Then I have to pull the paper and press return and it works again for a while. I can live with that. But still - a printer Photosmart with print, scan, copy, and wi - fi, all for $69 - how good is it?

  • "The HP LaserJet 1020 has the open front door or the toner cartridge is missing." Not true

    I'm going to print something and the troublescreen said: The HP LaserJet 1020 has the open front door or the toner cartridge is missing. But the door is closed and the cartridge is fine. I put a new in after the message started appearing thinking that the low level of ink was casusing the change. I suspect a mechanical switch is kaput, but do not want to enter the machine. All the switches look and feel like they are working normally.

    This little machine of love, it's a real workhorse, simple and effective.  I use a laptop Samsung with Windows 7 and my actions joint the printer using a Toshiba PC. We both get the same response from our little hp... todius

    I will now let you know that we have done to resolve this.  My wife has stuck a pencil in the slot of reception for the closed cover pin located on the corner left front of the top cover. She shook it until she was able to close the lid and printing. He now works as it always has.

    Babe thank you... todius

  • OfficeJet Pro 8500 does not accept the new cartridge

    My OfficeJet Pro 8500 has 910g does not accept the new magenta cartridge. It displays replace following used cartridge in the order of printing continues (translated from Swedish). I've done various resets and now to restore the alos an OOB (out of the box), does not help. My weighs 40g 940XL cartridge so I know what it it not empty. I have read a lot about the problems of cartridge maggenta but found no solution. The printer is fine, but this problem is driving me crazy! I have always recommended HP printers and have owned quite a few over the years,

    No problem, I understand.

    I think that could happen is that the oval pin mechanism comes into contact with food has become defective over time. Its supposed to sink to bottom when feeding is complete (on inserting). Over time as the ink level runs the mechanism will expand gradually until you reach full extension on what an ink level alert is triggered. What might happen in your case, is that the mechanism is not entirely depressing even when the new full provision is inserted. This would explain why to apply the tape inside the oval window on the supply allows the new offer be detected. Unfortunately, the fix for this would be to have the machine. If you think it's something you want to do here is a link where you can check the warranty status of the printer and based on this status, you will be presented with relevant options

    http://h10025.www1.HP.com/ewfrf/wc/weInput?cc=us&DLC=en&docName=c01321436&LC=en&product=4116838

    With regard to the branch point the device directly into the wall socket, sometimes for some questions (usually power up/on) the resolution can be plug directly into the wall in the routing through a power bar or surge protector can induce weak variations of the voltage applied to the unit. However, this should not be a factor in the problem you are experiencing, so there should not be any need for you to change your current configuration.

    More sorry that you are having a problem with ink level detection on your device. Please post back with other questions.

    Best.

  • HP LaserJet P1102 CE651A does not recognize the new toner cartridge

    I installed a new hp for my Laserjet P1102 toner cartridge, but still get the message "install the black print cartridge"and the orange light blinks.  It worked fine until the toner ran out.  Have tried to reinstall the cartridge and you are using a compatible cartridge, without success.  Can I do, or do I have to repair the printer that appears to be a case to send far from a reconditioned unit?  I am disappointed that he didn't after intermittent use of less than 18 months. It was purchased as the reviews said it would be great for printing of volume, but I have not at this stage yet.

    Any ideas?

    I had the same problem. Remove all paper from the tray. Make sure that no paper is started in the printer. I then replaced the toner cartridge and it was recognized. It seems that if the paper is launched to feed into the printer, then the new toner is not recognized.

  • I bought my printer to Bahrain, he does not accept the cartridges UK

    I bought my HP deskjet 1050 all in one printer to Bahrain it does not accept UK cartridges although I bought which is compatible for the model here in the United Kingdom

    Contact the customer service to the United Kingdom.

    They will talk you through the procedure of change of regionalizationation for your printer. It is no cost change.

  • 6210 all-in-One printer: European-sold printer does not accept the United States-have sold cartridges

    Hello

    I need advice to fix this... My printer (HP Officejet 6210 all-in-One Printer) that I bought in Europe does not accept the cartridges sold US. The printer identifies the cartridge 94 as incompatible. On the site of HP 94 cartridge is listed as being compatible with this printer (the original cartridge is 338). It seems that I need a new printer? It still works perfectly. Should I try other types of cartridges?

    Thank you.

    You will need to Contact HP to ask a "regionalization Reset." Do not charge for this, it is covered under the warranty of the cartridge. You will need to have access to your computer and printer then on line with HP. You will also need to have a set of cartridges for the new region, once completed reset cartridges of region of origin no longer works.

  • I need to reinstall Adobe Creative Suite Production Premium on my computer, when you are prompted because it does not accept my serial number adobe, I bought my version in April of 2013, why the habit he accepts my serial number?

    Hi all, I have reinstall Adobe Creative Suite Production Premium on my computer, when you are prompted because it does not accept my serial number adobe, I bought my version in April of 2013, why the habit he accepts my serial number?

    Quickly find your serial number

    Error "serial number is not valid for this product". Creative Suite

  • Laser Jet MFP 125nw: Toner Cartridge

    I just bought my printer a couple of days. The toner cartridge provided with my printer, no one knows how many sheets he's supposed to print until the vacuum? I didn't know if it's a trial size with a little ink or not!

    Thank you very much

    Hello @Hippie1422,

    Thank you for showing your interest in the HP Forums! I see you want to know the page give to the toner of origin. I want to help you.

    The printer comes with the HP Laserjet Printer Cartridge black preinstalled Introduction. It prints about 700 pages.

    Replacement cartridges for the Laserjet HP 83 toner cartridge black print about 1500 pages.

    Source: HP LaserJet Pro MFP M125nw.

    I would like to know if these measures worked for you. You can select the 'accept as Solution' and the 'Thumbs Up' buttons, which will help us and others see that we have the answers! Good luck!

  • Why is the '564 Setup' cartridge not compatible for use where a 564 cartridge is required?

    I just replaced the cartridges and noticed that the label says "564 Setup.  My HP Photosmart Plus B210 printer gives me this error message and does not print and does not accept the cartridge.

    Thank you.

    It seems as if HP is following the methodology of razor Gillette: sell the razor dirt cheap, but expensive and exclusive profit on razor blades.

  • toner cartridge warranty

    Happy holidays! My new 305 yellow cartridge HP LaserJet (CE412A) is faulty. I get the memory power 10.1003 error on my printer (HP LaserJet Pro 400, M475dn color). The problem is that there is a failure of communication with this toner cartridge. The mitigation step to reinstall the cycle of the cartridge and the power of the printer. I did it several times, and the error appears again.

    Toner was bought from Newegg.com November 20, 2014, and they said that they don't support consumables, so Newegg will replace it under warranty.

    I need to replace the cartridge under warranty from the manufacturer, because it has become defective. I searched the right number of HP phone call, and I don't the have not found. I tried 800-HP-INVENT, who then referred me to 800-334-5144 and went to the business, no guarantee support. I also tried the Contact Us and guaranteed HP ink page (where is a button "Contact HP"), and the website does not recognize the number of toner cartridge, as a product number valid.

    Please let me know what I need to do to replace this cartridge. My printer is inoperable now until the cartridge is replaced. Thank you.

    @treet007 ,

    I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).

    If you are unfamiliar with the operation of the function of the Forum, private messages you can learn it all here.
    Thank you for visiting the Forum from HP Support.

  • ImageRUNNER 3235i Toner Cartridge

    Replaced the now copier toner cartridge keeps saying "No. Toner" and flashing red error is lit.  I put in two OEM toner cartridges.

    Hey, Toney!

    Thanks for posting! Canon does not provide direct support for imageRUNNER the serial products, but your dealer will be able to help you! If you do not have a reseller, please call us at 1-800-OK-CANON (1-800-652-2666) and we will be happy to provide you with the names of dealers who are in your area!

    Have a great day!

  • Quality of rpint HP Laserjet color faded to the right of the page, toner cartridge the culprit

    Thus, a resolute quirk.

    My HP Laserjet 3800dtn produced pages in which the colors are washed out or did not go to the right margin.  Various associated software HP print diagnostic and diagnostics pages feel integrated, product pages with the same problem.  The colors on the right do not appear, but the black characters, text, graphic appears.

    At first, I thought it was the length of the USB cable, so I went to an Ethernet connection and run all the tests again and got the same results.

    So I took one of the toner cartridges and replaced by a new.  The same problem.  Then, and what a weird coincidence, I discovered that there are two somewhat 'heavy duty' springs on each side of the toner cartridge that works with the door (shadow) on the roller.   One of the springs was detached.  But it just not a not dislodge, because the position whereby the spring attached (a little nub) is broken.

    My conclusion is that the door opened only partially, and therefore the toner is never properly transferred to one side.

    Maybe I broke the node with some brutal manipulations, maybe a new one was defective, that it is I got two defective cartridges.

    However, not wanting to throw a + $100 cartridge, I stuck the spring and post and allowed him to dry overnight.

    Reinserted the fixed cartridge and everything of fine.

    Just sharing.

    An update more.

    Among the repaired 'bumps' failed.

    So I heated a thin nail, and he passed through the plastic in the area where the 'essential' existed.

    The, using fine wires, I threaded the wire through the hole of very small diameter and attached to spring for the plastic.

    Yes, success... another cartridge saved from an ignominious early elimination.

  • Can I still use the toner cartridge after deposit of 2 and a year and a half?

    I have a HP CE505A toner cartridge model in a sealed box, but the box have a date on it his 20111003 (I think that refers to October 3, 2011). Now my question is if I unseal the box can I still use the toner cartridge (whereas 2 years and a half elapsed from the date on the box), or if I buy another cartridge of toner?

    HP Laserjet toner cartridges are usually not a particular lifecycle or expirary date or end of warranty.

    You can use all your stored correctly with your printer laserjet toner cartridges & most probably you shouldn't find any problems or defects on them, until the cartrdiges are sealed pack & storage, or weather conditions (heat, moisture, and direct light from the Sun) did not cause any damage to the cartrdiges.

    Please consider reading this useful document related to the storage and handling of the HP laserjet print cartridges:

    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-bpl02955-5%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&ac.admitted=1401253189408.876444892.492883150

Maybe you are looking for

  • How can I change the video display Mode when the monitor mode not supported?

    While creating my new monitor, I changed the computer video display mode at 120 Hz by accident.  Now I see something on the monitor other than the words not taken in CHARGE the MODE. My system is a new HP Pavilion p7-1423W running Windows 8.1 with In

  • The streaming of Media Center PC on Xbox 360 problems after recent updates

    I've been streaming video of my Media Center PC on my Xbox 360 for about a month now.  I've never had problems until I installed the new update today.  Now I can listen to just a show for about 5 minutes then my PC freezes.  My configuration is: Wind

  • block diagram free programmatically return labels

    Hello I am looking for a way to recover by programming block diagram free labels for use in a report. There seems to be no option when you print a VI in html format to include the free labels. The description of VI is included very well and I would l

  • New owner Acer 5551

    Hi all I just had an Acer 5551-2648 after that my laptop old and tired cratered. I searched on the web, a lot of learning, but some questions remain: The Acer support site lists for the 5551 bluetooth drivers, but AFAIK, it came standard with BT I kn

  • FormatDateTime (Date, 2) return the date in an incorrect format.

    Hi all The region in my PC setting is in the United Kingdom. Short date is dd/mm/yyyy. But when I run the code in the following vb script. He's back in the form dd/mm/yyyy date. System date time shows in the correct format. sDateTime = FormatDateTime