Tons of spaces created by Contribute code html view

Similar Questions

• I'm unable to create a page in HTML only, no CSS

  We try to promote our company on Yelp, so I need to create a landing page to be inserted into our existing Web site. Our Web site has been created before my time and it's an online store, so they used OpenCart to create. Our it guy has created a page 'information' for me to use as landing page and OpenCart seems to have its own internal HTML code editor. I can't seem to find much help online OpenCart that solves these problems and because it is open source, I doubt they have a lot of support.

  I was hoping I could save time using Muse or Dreamweaver, but OpenCart doesn't seem to like the extra code they have created. So I try to simplify the ordinary HTML Help. OpenCart does not seem to give me access to the header of the HTML page, so I don't know how to set up the internal CSS rules and I don't know if there is even a way to use an external CSS document.

  So I try to do most with old-school HTML formatting only. But it still does not work. Most of the instructions I found online involve the use of internal or external CSS that is not an option. So I tried to copy my code HTML of OpenCart editor and paste into errors of the W3C checker, and he too said to use CSS. He also said the < center > element is deprecated, but it is one of the few things that seems to work in OpenCart.

  What I have a problem with formats, sizes and colors of the h1, h2 and h3, but for some reason, it is inserted extra semicolons, equal signs and quotation marks, as well as spoiling disclaimers which follow. So I have to do something wrong, but the W3C is not telling me what formatting symbols I should use instead.

  So I tried to paste my HTML code in a free code editor, I found called "Media" which seems to be an Adobe product, also, but I couldn't find a separate forum for this category. If there is a more appropriate forum category to post this in, I'm open to suggestions. I was hoping that he could give me more Visual cues as to what I'm doing wrong, but so far, no.

  If anyone knows how I can format the following using only HTML and no CSS (including where and when I have to use colon or semicolon, equal signs and quotation marks, and if it is better to use pixels or ems for font size and RGB hexadecimal color codes or numbers):

  I want a h1 which is bold (although the default value is "BOLD" is fine), 48px or 3 - 4th and RGB 228, 25, 50 or #e41932

  I want the h2 which is "BOLD" (default is fine), 18px or 2 - 3em, default black color is fine.

  The default size and color for the h3 is fine, but it seems to enlarge the next paragraph, even if I have the < h3 > < appropriate / h3 > < p > and < / p > tags (although I have a soft back between them, if that makes a difference).

  In addition, no matter how I try to format the headers, they seem to break up the text of the following warning, which makes them bigger even if I use the appropriate heading and paragraph tags.

  Once again, if there is a better forum to post this in, please let me know. Or, if there is a kind of another forum on the internet where I can ask for help about HTML, please let me know.

  Thank you very much!

  The age-old battle with it's your system.  It's very likely you locking to make style changes because it is all handled the external file system-wide.  You cannot download your own separate HTML page on your server and use it for your landing page of YELP?

  Nancy O.

• I'm trying to connect on Apple TV.  It keeps generating a 6-digit verification code, sent to another device.  I need a 4 digit or need to know how to make a space on the verification code entry screen

  I'm trying to connect on Apple TV.  It keeps generating a 6-digit verification code, sent to another device.  I need a 4 digit or need to know how to make a space on the verification code entry screen

  Read this noting the last two paragraphs:

  For Apple ID - Apple Support two-factor authentication

  You can try to add on your suggested such password or disable the service and then connect.

• NiMax tasks vs tasks created in the code which is faster?

  I'm curious as to which is better to use, tasks created in NiMax or tasks created in the code? If I acquire 8 analog channels, there is a downside to create tasks in NiMax speed? I know there is less code involved but what about the time it takes for labview read the configuration file that contains the tasks that are defined in NiMax? There is a significant advantage in the code?

  Thank you

  Bryan

  BryanSw wrote:

  I'm curious as to which is better to use, tasks created in NiMax or tasks created in the code? If I acquire 8 analog channels, there is a downside to create tasks in NiMax speed? I know there is less code involved but what about the time it takes for labview read the configuration file that contains the tasks that are defined in NiMax? There is a significant advantage in the code?

  Thank you

  Bryan

  I'd go with the third Option (which is the one I use) - set the task in the project.  First of all, define the task in MAX, make sure it does what you want and you are happy with it.  Then go into project, New, DAQmx task, and once again, to register in the project.  Use one in the project, which "lives" with the project and not with MAX.  If you need to change a parameter at run time, it is a great time to get some code...

  Bob Schor

• Create process failed; code 740 the requested code requires an elevation trying to download the latest version of Any Video Converter

  While I was trying to download the latest version of Any Video Converter I got the message: create process failed; code 740; the requested code requires a rise.  What does that mean and what should I do to be able to download this program?

  Hello

  (1) have you made changes before the start of this issue?

  (2) what website you are trying to download from?

  (3) when exactly you get the error message? While trying to download or install?

  (4) what browser do you use?

  (5) can you download and install other applications/programs successfully?

  Create process Failed: Code 740 is an error which is caused by Windows being unable to load the permissions that your computer needs to function correctly.

  Try disabling the user account control:

  Enable or disable the User Account Control

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off

  Note: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  Let us know if that helps.

• Automation server can't create object 0 code

  attempt to send 123greetings ecard. implementation error. Automation server cannot create the object.  code 0

  Hello

  Automation is probably the server that create a specific code of the card on 123greetings.com

  Their server is under their control, I would suggest that contact you them for support.

• Creating a Bar Code Android instead of APK file

  Is it possible that you can create a file "Code Android" bar and not the APK?

  When I renamed the zip file bar and open archive, I see that the conversion is essentially just a MANIFEST file next to the original apk file. But I'm looking for a file bar that looks like a normal bar without a trace of the apk. Is it possible to do such a conversion?

  The main cause of this limitation is the fact that there are no Android runtime in the scope of work of a BlackBerry Smartphone.  So even if you can install the application, it would not be able to run.  That's why BES prevents the installation of Android applications.

  To install in the scope of work, the application must be a native application of Cascades of BlackBerry or application of Cordova.  If your APK was built using Cordoba you could recompile it in a BAR not Android file.  If the application is pure Java Android, should be re-written or installed in the personal area.

• Create process failed code 740 requested operation requires an elevation

  After installing the trial version Everest (material ID software), I get this message "create prosess failed code 740 requested operation requires a rise." This was followed by a crash after x'ing out.  Funny things are gone. Mouse came out the other day (possibly not related), yesterday lost keyboard driver. Then downloaded regcure and all the he'll is unleashed. I have Mcafee dumped (which was), installed and run AVG and one - quared and found nothing. I also run Microsoft malicious software last week and found nothing. last night when I was trying to get rid of regcure - which I downloaded from the site of microsoft in connection, it would pile up a hundred windows on my screen and then told me that he was no longer at the location. I don't know where he is. . I know it's a lot of things, but just try to ask for one. I'm afraid that I'm digging deeper.

  The Everest product is certified for Windows 7? I note on their web page to claim "BOLD", it adapts to all versions of Windows, I tend to doubt since Windows 7 places many restrictions on software, especially when it comes to probe the material. I would like to use the system restore to return Windows to a point before the installation of Everest.
  _________________________
  ID #0211. If this answer was helpful, you can vote by clicking on the green triangle. If it solves the problem, click 'propose as answer. Thank you.

• How can I create photo recovery with Html 5 Webworks?

  How can I create photo recovery with Html 5 Webworks? Please answer me

  Hello

  We have the developer Micro Web camera API documentation available on: https://developer.blackberry.com/html5/apis/blackberry.invoke.card.html#.invokeCamera

• Create combinations of Code account

  Hi all

  I'm about to set up accounting for a fictitious company if the virtual Vision machine.

  I created the chart of accounts (COA) and the values, but when I try to create combinations of code (CC) account it always ask the certificate of authenticity for the operations of the vision. is there a prifile option I need to change to get the certificate of authenticity desired creating GL CC?

  Thanks for help.

  Best regards.

  Please do the following and update this discussion:

  Big book general Super User > Setup > Financials > FlexFields > key > Segments: inquire newly defined "accounting Flexfield" pursuant to the "big book".

  Free Flexfield definition

  Enable allow dynamic inserts

  Gel and compilation

  Inquire your incomplete accounting

  RE account directly into accounting

  Full definition of accounting

  You can disable allow dynamic inserts now

  Concerning

• I can switch between the code sheet and css html, but I would like to see them both at the same time as well as the design window. Right now and can see rather the design and code html or design and css. How can I arrange to see all at the same time, of

  Hello

  My name is Ellie and I am new to Dreamweaver.

  I can switch between the code sheet and css html, but I would like to see them both at the same time as well as the design window. Right now and can see rather the design and code html or design and css. How can I arrange to see everything at the same time, design, HTML and CSS?

  Thank you

  It ends up something like that...

  

• Cannot create a new blank HTML page in Dreamweaver CC 2015

  I can't create a new blank HTML page. When I select file > new > new Document > HTML, the window frame is empty and when I click on create nothing happens.  I tried to restore preferences as suggested in this post: is more able to create html empty in 2015 for CC, but it has not solved the problem.  I completely uninstalled the program and then reinstalled, but still no luck. I don't want to go back to the previous version as it kept crashing, it's why I've updated. Any other suggestions?

  Windows 7 Enterprise 64-bit

  Adobe Dreamweaver CC

  2015.0 release

  7714 build

  

  This should help: reinstalling Dreamweaver (or the extensions Manager) fails to solve the problems.

• How can I put HTML codes with muse cc? I have to put a watch on my site, I only codes HTML

  How can I put HTML codes with muse cc? I have to put a watch on my site, I only codes HTML

  Hi Antonio,.

  You can use the object > option to insert HTML code to add your code to the page.

  Kind regards

  Aish

• Facebook like button does not work, I used the widget of muse and created the facebook code. Anyone know how to make this work?

  Facebook like button does not work, I used the widget of muse and created the facebook code. Anyone know how to make this work?

  Hi connally25,

  Here is a link to a video tutorial on how to add a Facebook button, please check if you have followed the same steps to add the video.

  http://TV.Adobe.com/watch/learn-Adobe-Muse-CC/adding-a-Facebook-like-button/

  If you followed the steps correctly and the button still does not; Here is a link to a forum thread which may help to solve the problem:

  Facebook follow Widget does not

  Concerning

  Sonam

• Sometimes web error message from the client / popup that lies behind the HTML view

  Hello

  At times the web client error / popup hiding behind making the full background grey out and highlighting HTML display the HTML view. At this stage the actions behind the HTML code / above the screen HTML is not clickable, which forces the user to refresh the entire page (in case of a popup). Please find attached the screenshots. I tried to find if it is a known problem, but found no references linked to this document from VMware. Can someone please tell me, if there is no work around for this problem.

  Details of the environment:

  • Browser: Google Chrome (latest version)
  • OS: Windows 2007 and 2 k 8
  • vCenter: 6.0

  
  

  Steps to reproduce:

  • Open an extension point that contains the HTML content.
  • Leave it for awhile until the point the web client session, timeout occurs (or) to disable the WebClient service / vcenter server service (Note: this one is not always reproducible.)
  • Try to perform some action less content, it will display the html error message / see the popup behind the html code.
    

  
  

  The problem of popups being hidden behind an HTML view is fixed in version 6.0.1 which was released on 10 September.

  Same question as indicated previously here: problem with IFrame based HTML hosting inside Flex views