too long queue when printing 'surething program. "

Similar Questions

• Pulling in too many sheets when printing to the printer.

  I have an Officejet 7310, which pulls in too many sheets of paper when it prints. This seems to be the case with all types of 8.5 "x 11". Any ideas? Thank you!

  What is the weight of the paper

  If you use 20 lbs

  try the 24lbs

  Also check the properties of the printer of somewhere the on this box or

  It's in the preferences

• Photosmart 8100 error message too small paper when printing envelopes.

  I am trying to print envelopes 8.75 "X 5.75" and I get an error message that the book is small. How can I fix it?  It will print on 8.5 by 11.

  Hey,.

  No problem, margen!

  I would recommend using the Deskjet 9800 driver with this printer because it also uses the PCL3 GUI language.  This print driver allows custom paper size so that you can manually configure this size management.

  To swap to another driver, please follow the steps in the thread found here.  However, instead of the driver 990c or 450 please use the Deskjet 9800 driver.  You may need to click the Windows Update button at the bottom of the printer driver selection screen to pre-populate the list thus providing this HP Deskjet 9800 driver as a selection.

  Hope this helps,

  Jason

• Paper too long on the front

  On my new printer all-in-one HP 8610, I use A4 paper. However, whenever I try to print, whether front or front / back I get an error message saying "paper too long at Auto-duplex.  If I close the window, the printer prints normally, so it isn't a big problem, but I would be quit anyway.

  Hello @mussep,

  Thanks for getting back to me on this subject.

  Because this error appears when printing several programs on your computer, the e-all-in-one printer HP Officejet Pro 8610 there may be a problem within your printers Firmware Version of programming. Or, there may be a conflict between your Windows 7 computer and your printer HP Officejet driver. Can I please you follow the steps below to isolate this problem and fix it.

  Step 1: Make a copy:

  To make sure that printer hardware is working properly, I'll ask you to perform a copy on the front of your printer A4 paper. If the copy print correctly, without error messages on the printer or the paper feed issues, then we know that something on the computer is originally this printing error.

  How to copy on A4 paper:

  1. Please load a sheet of paper for the test copy either on the flat glass on your printer or in the ADF on top of your printer
  2. On the front screen of the printer, please press copy
  3. Then, tap the settings icon on the bottom of the screen
  4. Under copy settings tap paper size. Please make sure that it is set to A4
  5. Select set as new default values. Press Yes if prompted
  6. Please make a Black or a color copy

  -Source: How to copy

  • If this print-out successfully with no errors or problems paper, that the printer hardware is working properly. This seems to indicate that the problem you are having is caused by something on the computer. Can I please you proceed to the next step to resolve this problem.
  • If the copy fails to print correctly, the problem you are experiencing is caused by your printer. Maybe it's a problem within the internal Firmware programming in your printer. Essentially, the Firmware is the "brain" of your printer and control that made the printer and how the printer it. If there is a corruption in the internal programming of Firmware on your printer, it may cause the printer to performance issues. Can I have it please click hereto download the last Firmware update. Once the download is complete, you will see a prompt to "run" the update of the Firmware. Please allow this to run. The Firmware Update utility is now launched. Follow the prompts on the screen to 'send' the update of the Firmware for your printer. Once the update has been completed successfully please make another test copy to confirm if your machine now copy on A4 paper. If the copy is now accepted, please print from your computer to see if the problem is now resolved. If a copy still fails, please do not continue to troubleshoot at this time.

  Step 2: Uninstall the driver:

  If you use a USB cable connection between your computer and your HP Officejet, please unplug this cable now.

  1. Click on the Start menu
  2. Select all programs
  3. Select the HP folder
  4. Select HP Officejet
  5. Select Uninstall

  Please follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete, proceed to the next step.

  Step 3: Delete the temporary files:

  1. Click on the Start menu
  2. In the box "search programs and files" located just above to start after you click on it, type %temp% , and then press enter on your keyboard
  3. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  4. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  5. Close the Temp folder when it is empty
  6. Right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.

  Step 4: Install the device:

  1. Please click here to download the latest drivers for your HP Officejet.
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. If you use a USB cable connection, do not connect the USB cable until the installation program invites you to

  Once the installation is complete, please test print from your computer to confirm if the "too long in the Auto-Duplex document" error is resolved.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Problem too Long way destination - Item not found to rename folders

  I searched an answer in the world to this question and it seems that none of the '' correction '' that people have had success with worked for me, so I write my own question in the hope that someone can help me, and in turn anyone who stumbles on this problem will find this thread and be helped as well.

  My OS is Windows 7 Home Premium SP1

  Here's the problem:
  For a few months now, I was not able to make a new folder and rename it with windows Explorer (I have to go to the command prompt and do it this way)
  It gave me errors "Destination path too Long", despite the path doesn't exceed NOT the limit of 260 characters. Even if I rename the folder '1' or 'a' it gives the error. I have files that were created before the problem that are fine, but they can't really be renamed with windows Explorer.

  It also gives me the 'path of destination too long' error when you move files in other folders, thus making the Organization of difficult cases.

  I tried to uninstall the update "kb980408" as other threads have said... and it did nothing for me. I tried to delete the reg files as indicated on multiple threads to try to solve the problem that some people had success with... I have not the case.

  I ran chkdsk, several malware scans and viruses which did nothing.

  I had not initially installed SP1, so I tried to see if it changed anything. He did. Instead of the "destination path too long" error, I then go "object not found" when you try to rename a file or move a folder to another folder. If I hit "try again" on this box, then it would actually rename the folder or move the folder successfully. Well, not being able to live with the stupid error that appears when I want to simply create and rename a folder, I searched for a way to get rid of THIS problem that brought me to remove these registry keys once more. After reboot, back to the error "destination path too long" and not rename/move the files once more.

  Anyone had any experience with this problem and you can guide me in a solution that does not involve a clean install?

  Hello

  Read the following article, it helped me to solve the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/destination-path-too-long/7ff8d0d0-84F3-4d13-B2FD-f742a38731c5

  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/c6bf8dad-eb04-4818-Ab19-6c46854dd146

  http://www.bryantwebconsulting.com/blog/index.cfm/2012/1/19/getting-around-Windows-7-destination-path-too-long-error-when-deleting-files

  http://forums.techguy.org/Windows-7/911476-solved-destination-path-too-long.html

  Make sure you try all the steps.

• Path too Long error

  Hello

  We continue in our domain network get a path too long error when recording to the reallocated, documents or network folders within Word - someone knows this?

  I checked the various files and folders and all are within the maximum limit.

  Our network is running Windows Server 2008, Windows 7 Pro and office 2013.

  Thank you very much.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• My printer HP F-340 in one stuck in the queue when I try to print images.

  My printer HP F-340 all-in-one stuck in the queue when I try to print pictures but works fine when I print the letters and documents... Yes the printer fails only when I try to print photos or digital images (even the small photos).

  Could someone provide me with support to find out how to fix this fault? I already managed the "HP autofix tool" and said that everything is OK.

  Any help would be appreciated so much. Thank you.

  JMF60.

  HI - sorry for the late reply.  It does not resemble the printer hardware, so I wouldn't worry about the printer being the end of his life.  At this point, I think that I recommend to uninstall then reinstall the printer software.  This problem seems to be really driven by the computer/software.  This document will guide you through the uninstall of the printer.

  This document will guide you through the installation.  If you no longer have the CD that came with the printer, you can download the latest driver of the printer from here.

  BTW - nothing has changed between the time it worked, and when you started having the problem?  (Installed new SW, other hardware changes, etc.).

  Hope that helps.

• I have problem with a .iso file that when I want to use I face the error "the file name is too long.

  Original title: name of a file

  Hello

  I have problem with a file .iso that when I want to use I'm dealing with error "the file name is too long" and I can't use this file anywhere for example: vmvare ' untraiso and even if I cannot write to cd or make a boot USB.

  I don't know how fix it.how I rename the file iso, shorter that I can use?

  Please help me.

  Thank you.

  Right-click on the ISO > rename > give a short name

• Takes too long to Hibernate when I close the lid - also the noise of random device when starting

  Hello guys.

  Since I wiped the machine, I had these two problems. When I close the lid, he used to go to bed right now, but now I see the light of sleep (and the power button), flash and flash, and then he goes to sleep.

  Upon awakening, he crosses the start of lenovo screen and resumption of the windows, then it asks for a password, before I used to open the lid and he was asking me the password immediately. I know it was going to sleep because I could hear the beep immediately when I closed and opened, but now it takes just too long.

  In addition, every time I have boot into windows or resume in a sleep state windows, I hear the sound of the device, like something being connected input/output. But there's nothing being plugged or back at the time. I can't to Device Manager fast enough to see who it is who is the cause.

  But all the drivers seem to be correct.

  Thanks in advance.

  Sam.

  EDIT: Also noticed, when the lid is closed, randomly the laptop turns off (beep) one then turns left.

  Weird.

  T420 model number: 4180-PR1 with operating system: Windows 7 Pro 64-bit

  Completely wiped the machine and reinstalled everything. No Acronis this time and work all fine.

• My page is printed too high. When you print the report of diagnosis of iMac, top of page letters are cut off the page

  I have a hp c310a all-in-one.  When you print cd labels, graphics look good on preview before printing, but when it comes to the printer off, the graphics are about 1/4 "too high, which leaves the low" 1/4 of my blank cd label.  I printed a report of quality Diagnostic print from my mac and it came out too high.  Cut the top of the report, it began printing until the paper is correctly positioned.  When you print the Diagnostic Report of quality printing directly from the touchsmart on my printer screen, the report will print very well.  I wonder if there is a setting miss me when I go on my printout.

  Hello

  This really sounds like a parameter of the wrong paper on the computer, type or wrong size setting can cause these issues, especiallly it seems to work perfectly when printing directly from the camera.

• The internet connection is lost when the computer puts itself to sleep after that idlen too long time needs to restart to re-establish the connection.

  I lose the internet connection

  Window vista Home premium intel core 2 quad CPU q6600 @ 2.40 ghz, 3.00 GB ram the System 32-bit

  The internet connection is lost when the computer puts itself to sleep after that idlen too long time needs to restart to re-establish the connection

  Hello

  Control Panel - device - network - manager double-click the used network - power management device
  Tab - uncheck the computer to allow him to turn off the device.

  Control Panel - Power Options - check at each change of diet Plan - change Plan settings - advanced
  Power settings - check the settings there.

  You may reset the default power Plans and and then change them as needed.

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to uninstall security programs I don't have, I have more than one and do not know which to use. they clean too many files when uninstalled!

  How to uninstall security programs I don't have, I have more than one and do not know which to use.  they clean too many files when uninstalled

  Hello jillmarsden,

  It is not recommended to have multiple Antivirus or firewall installed at the same time because they can cause conflicts as PaulAuckNZ said. However, instead of remove antivirus in programs and features, you must go to the Antivirus website and use the removal tool which is produced by the manufacturer of the antivirus program.

  Microsoft has a free Antivirus called Microsoft Security Essentials. It provides protection for your PC in real time at home that protects against software viruses, spyware and other malicious software. It is simple to install, easy to use and always up-to-date with protection.
  You can download from the link below:

  http://www.Microsoft.com/securevista

  Be very careful on the acceptance of direct assistance to another user. If this user suggests that he use Remote Assistance to help you, be aware that it will have access to your computer and that your computer could be hacked.

  Please let us know if you have any other questions.

  Sincerely,

  Marilyn

• LaserJet pro m401dne: fatal error, takes too long to connect with the printer

  Downloaded the driver of HP software, started installation and got to the point where it says to connect the printer, did, he recognizes it, start the data transfer and just takes forever. After ten minutes, I get fatal error takes too long to communicate with the printer, if aging persists restart the computer and try again.

  I've made this 3 times now and same result.

  Since my laptop doesn't have a cd drive, I copied the cd to a flash drive and installed the software from that. Worked perfectly. Something must be missing or corrupted download. Anyway problem solved

• "File Name Too Long" when copying files on USB using Windows 7 Home Premium (64-bit)

  When I copy about 60 GB of library files in a backup folder on a USB key, at the end of the copy, it is a dialog box indicating "file name too Long for the Destination Folder.  It shows that there are 62 records like that, and I can choose to ignore these files.

  1. I had formatted the USB stick to NTFS - which does not allow large file names?

  2. How can I see which files have this problem so I can shorten the file names?

  Thank you!

  Hello

  What is the capacity of the USB?

  Were you able to copy before?

  Try to format the drive once and then try and check if it is beneficial because it can also happen when there are viruses.

  You can also check the drive for errors.

  Here is the link:

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  It will be useful.

• 'File name' error too long when you copy a folder to a DVD disc

  When I copy a folder that contains a large number of files on an external hard drive, I have no problem, but if I try to copy the same folder to a DVD disc, I get a message indicating that a file name is too long.  My first question is why do I get the message for DVD and not the external hard drive?  My second question is: How can I generate a list of files in my folder that have too long names? My second question is already other post on the forum, but there was no answer.  Is it because it is not possible to generate such a list?

  Thank you

  It depends on what is called the 'file system '. File systems are how files are stored on a disk. Many of them have limits on how long the total file path can be. DVD and external hard drives use different file systems.

  If you want a list of all the files in a folder, open a command prompt. Type this in:

  CD "C:\path\to\folder".

  and press ENTER. Replace path\to\folder with the path of the file in your file that you want to check to make sure this filepath is in quotes!

  Now type:

  dir /s > 'output.txt '.

  and press ENTER. This will tell the guest to make a list of all the files in this folder and in each subfolder, and then store in a text file. This will allow you to view the list and I hope to find the long file names. Once you have found the long file name, go to that file, and then change the name.

  Here is an example of the above commands. Let's say I have a folder named "foo" in the My Documents folder. I first type:

  CD "C:\Users\Entegy\Documents\foo".

  and press ENTER. Now, I want the list of files to be placed on my desk. Then I type:

  dir /s > "C:\Users\Entegy\Desktop\filelist.txt."

  And voila, I have a list of all the content of foo on my desktop files. Just make sure that your path ends with .txt and you'll be fine. And don't forget to put quotes around filepaths!