Toshiba HD-1CMOS SDI - HD camcoder on optical fiber

Similar Questions

• Is the Airport Express optical fiber compatible? (Verizon Fios)

  Is the Airport Express optical fiber compatible? (Verizon Fios)

  Verizon wants me to have one of their routers. Is it necessary if I already have an AirPort Express?

  The airport is a router, not a cable modem. Verizon are likely to provide a cable modem that is also a router, and therefore has an entry for the cable and several outputs ethernet; It can also have wifi.

  You can probably turn off wifi if you prefer to use the airport; and there is nothing prevents to connect airport entrance to one of Verizon output using its wifi and ethernet ports. As long as it is reasonably recent, it should detect that it is connected to a router and configure properly.

• What tool would you use to create optical fiber cables?

  I created which, I hope, will be appropriate brushes to create what must be an accurate picture of vector of optical fiber.

  My question is, what steps you would use to make realistic fiber in adobe illustrator cc 2015?

  I tried the tool brush and pen. However, I found cutting an ellipse in half and using her own path is a good source.

  Thank you

  So two thoughts here. According to Visual processing, there are many approaches to making it. However, here are two things of Foundation that I consider important for you after your Visual processing is established.

  1. create the appearance you want. Below you can see I used a single path with several properties top STROKE in the appearance Panel. Press the button Add race in the pane appearance with this selected path and modify each stroke to get the look you want. Here I use 3 stroke properties. One is black and thick, the second is more thin and grey, and the last is a gradient on an attack of apoplexy that reflects the gradient on the path. Once you have created, select it and press the new button in the Panel of graphic Style. When you draw something, now click that graphic Style and it will make it the path for you.

  

  2. create an Art Brush with scale between the guides. In this way he traces a path with the art brush and always finish by the fibers of the end of your thread unaffected. Draw your image and drag it in the Panel forms. Choose Art Brush as the type, and then click OK.

  

  When the following options come up, then opted to evolve between the guides and drag the guide so you flush the part you want to not scale or adjust.

  

  Now, whenever you draw a path, choose this brush in the brush Panel and it will automatically draw with the part between the guides and add the endpoint without scales or distorted.

  

  Good luck

  Bunch of brand
  lifebypixels

• Can not print wireless Photosmart B110a MacBook Pro after switching to optical fiber.

  I am currently using OS X 10.7.5. After the installation of optical fibres, using Huawei HG863 I can no longer print wireless from my MBP, iPhone and iPad.

  I downloaded the HP v2.12 for OS X printer drivers and reset the settings of the printer, as recommended here and now my iDevices can not detect the printer at all. The printer works fine with other computers in the office.

  Have you contacted both the provider network and Huawei support people, but both were unable to detect the problem. This could be a compatibility issue?

  Hello

  All Appl edevices uses Apple Hello to communicate with the device through the netwrok, it seems that the router is not compatible Hello or do not have the protocol enabled by default.

  You can work around this requirement by adding the pritner using Jetdirect, but it will only provide the functionality of the printer, Hello support is necessary to allow the scanning of your Mac.

  To add the printer using a Jetdirect enter printing & scanning, click Plus the sign and enter the IP tab.

  Set the Protocol as HP Jetdirect-Socket and type the IP address pritner.

  The IP address can be located by entering the parameters from the front panel of the printer, and then enter the wireless settings.

  For the router, don't forget to check its compatibility Hello, amy also be appointed as multicast or mDNS.

  Hope that helps,

  Shlomi

• cable / broadband optical fiber connection

  Can I use my modem/router WAG320N with a fiber optic broadband? If it isn't that one do I have to get / that you recommend?

  Thank you

  You can't have a single box. Routers with receiver integrated fiber optic are very expensive. You will have two boxes: the United Nations and the ethernet router.

  And don't forget: a router ethernet is versatile. It can work with any internet connection as long as you have a modem that works with your ISP. Ethernet is standard, you can still get a modem. Thus, two boxes you making it more independent from the ISP and the kind of internet you have: you can always take with you your router except if find you it is too slow for your next ISP...

• SWR2048: Question optical fiber

  Guys, I'm trying to find an answer to a problem

  I have a campus that uses about 8 switch SRW2048 around campus.

  They will install the fiber between the buildings to improve speed (currently using Ethernet - very slow)

  Here are my questions:

  1. can I connect the fiber-optic lines directly in SRW2048 switches using their ports mini-GBIC, instead of going to a Media Converter and then to the ethernet line?

  2 should. what equipment I fill this?

  From my understanding, it's doable, but I get lots of different answers to make this work 100%.

  Any ideas would be greatly appreciated.

  These products are processed by the Cisco Small Business support community. (URL: https://supportforums.cisco.com/community/netpro/small-business)

• Very slow Windows Vista desktop with optical fiber connection.

  Since we moved and got a fiber optic connection, my computer is very slow.  We have laptops in the House on windows xp and wireless connections that are not having problems with speed.  My computer is directly connected to the modem.

  Go to the website of the manufacturer of your Modem > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• What is neg 30 "error on the optical fiber

  Hi all

  at our office, we have telco tec came and it has tested the demarc to our device fiber and reported this

  30 "error neg, he told us to check our equipment.

  My question is what is neg 30 "error. He told us that there is extremely low loss.

  When we do the ping of our device on teclo circuit, we see packet loss.

  Thank you

  Mahesh

  You don't have not provided us any information about the network or hardware you use or where this neg. 30 error is reported.

  My guess is the technician tested at the level of light at your equipment and measured - 30dBmv.  Most of the optical transceivers, GBIC/SFP, have a minimum level of optical input of-17 and - 29dBmv, according to the type (SX, LX, ZX, WDM).  So,-30dB receive level would cause errors on your link.

  Check the routing of the fiber to see if there are sharp turns or the kinks.  Additionally, make sure that the connectors are clean.

  Tell us what you find.

  Tom

• VCenter should he optical fiber connectivity?

  My apologies if this is answered somewhere else, but some searching google and forum this increase.

  We are planning our first ESX deployment.  We will use our FC SAN.  The vCenter server needs to have a direct connection to the San?  (as in, need a CF card to connect directly to the fabric?)

  What I've read, I think that the answer is no, but I wanted to check, since we need to buy things right the first time.

  Thank you!

  Nope there is no need to talk to the SAN just your hosts

  Jered Rassier

  ##If you found my post answered your question or helpful please mark it as such.

• 55VL900A and BDX4300KY - TV is not output Dolby Digital fiber optic

  Just installed my new TV, 55VL900A - great picture, very happy. I have a BDX4300KY a drive blueray and Foxtel connected to the TV via HDMI.

  The TV has audio output optical fiber, which I run for my Yamaha DSP - A1 amp.

  The Blueray and Foxtel are defined to pass on Dolby Digital through HDMI.

  Problem 1: TV does not have Dolby Digital of the fiber optic connection.

  Problem 2: If I run audio blueray or foxtel fiber optics directly to my amp, there is a sync problem. The audio is delivered earlier than the image.

  I searched and found no results in my manual, or in the forum. Help, please.

  Thank you, Mike.

  Hello

  I put t have the same devices at home, but I use the optical cable for sound. It is connected to my blue ray and Technichs amp player. I use 5.1 home theater connected to the Technics. The sound is perfect.

  I put t know how it works on TV Toshiba but check please if something should be enabled there.
  > The TV does not have Dolby Digital of the fiber optic connection.
  See s operating manuals and do not forget the optical output must not be activated. Optical cable is connected to the amp in the optical port marked as TV in the back? Don't forget that bulks is set to TV chanel when you want to hear the sound of the TV directly. In my opinion, it should be best option for you if you will be able to make it work.
  > If I run audio blueray or foxtel fiber optics directly to my amp, there is a sync problem. The audio is delivered earlier than the image.
  Which is really strange. Can you please test it with cable audio normal cinch? It will be interesting to know if the same problem occurs again.

• 52 "Regza TV Audio - HDMI-output optical audio problem does not

  Hello

  friend of mine has a Regza 52 "LCD TV.
  She's trying to connect its apple TV & Optus Fetch device (cable TV) on the HDMI inputs and then having the audio outpot of optical fiber audio outpot to his BOSE amplifier.

  My understanding is that when you select an HDMI input, then the video and audio must be addressed.
  So you should see the video on the HDMI channel and need to hear the sound.

  What is happening is that she sees the video selected on the HDMI channel, but not audio, the sound heard is actually free in the atmosphere of television station that had been retained.

  We tried all the TV menu options successfully.

  How do we get the optical audio output to be on the instructions of the HDMI input?

  Thanks for the help
  Peter

  Hi Peter

  All this should not be so complicated. Using an HDMI cable, you can transmit video and audio to external device to TV signals. For example, if you use the HDMI 1 port and turn on the V you should see the picture and hear the sound of the TV.

  For audio, you can use an external device like Hi-Fi receiver or this BOSE amplifier. Using the optical audio output of fiber on your TV, you should hear the TV sound look no matter what external device is the source or which channel you. What you see on the TV the sound comes through this amplifier.

  I have this BOSE unit, but all I know is that when you want to hear his amplifier the right port or channel must be enabled there.

  I use my Toshiba TV connected to the Yamaha V537 amplifier with optical cable and it is listed under AV4 port. So when I want to hear the sound on my Yamaha I need to enable port AV4 on it and its is here.
  Some additional settings on the TV are not necessary. Optical output on the TV is always on (see the red light on the inside).

  Check this please on BOSE amplifier.

• Satellite A660 - optical driver turns off when burning DVD

  I have a problem with the optical drive of energy saving options that disables the drive while burning.

  I tried all the suggestions mentioned here [http://forums.toshiba.com/t5/Satellite-Laptops-A-Series/Optical-drive-automatically-turns-off-due-to-power-saver/td-p/223654], but it does not help.

  I start at the burn in Ashampoo Burning Studio free, and he seems to be good until the end. When it starts the process of lead-out the popup of the optical signals Drive Power drive is turned off. It's funny because it is still running at the speed of combustion and it will not stop. The reader becomes unresponsive, even I can't the DVD out. Even, that it disappears from the list of devices.

  The only way I thought so far to stop the car and release the DVD is in the shutdown/Hibernate the computer.

  Once the dive starts working again the STRANGE Fn-tab functionality started working and I can turn it on/Off/ejection at will.

  All the burned DVD - s are not valid, and so far I have not managed to burn a single functional DVD.

  I have a Toshiba Satellite A660 - PSAW3E with Win7 Enterprise 64-bit.

  Is there a way to fix this? Remove the optical drive power management?

  Hello

  To be honest I have never heard of this issue, but it appears that the optical drive power management is part of the power of Toshiba configuration utility.
  Part of the Toshiba value added package configuration done Toshiba power utility.

  What you can try, for testing purposes, to remove the Toshiba added value of the system package, restart your computer and try to burn DVDs again to see if the same problem will occur again.

  Toshiba value added package contains several tools such as utility cards flash FN so after his withdrawal, you will not be able to use the FN keys. In any case, after that trial, you can download and install Toshiba value added package again.

  I mean, I know what kind of conflict is there, but maybe you should consider it.

• Why fiber optic use 4 types of connectors? And what is single mode or multimode optical cable thinner?

  Why fiber optic use 4 types of connectors? And what is single mode or multimode optical cable thinner?

  Why fiber optic use 4 types of connectors? And what is single mode or multimode optical cable thinner?

  Hello

  To bookmark this site.  He may have more information for you. Wikipedia

  Joining lengths of optical fiber is more complex than to join the electric wire or cable. The ends of the fibers must be carefully cleavedand then spliced, either mechanically or by merging with heat. Fiber optic connectors for removable connections are also available.

  Scroll to the termination and splicing

• Connection WAP54G optics and fiber

  Switch used DSL Westell Modem - Linksys - WAP54G and everything worked well.  Changed to fiber optical fiber directly to the switch connected to ethernet and Internet services provider.  Ethernet network works fine but can not access the WAP54G.  Laptops see the WiFi, but local only.

  Should the WAP55G or ethernet fiber (or not) use the uplink Port #6 port?

  As you change the DSL ISP to optical fiber, you need to change the ip address of the WAP in the range of fiber optics ip.

  Also affect the gateway on the WAP even from the optical fiber.

• Satellite A500-140 - graphics card upgrade possible?

  I have a Toshiba Satellite A500-140, I was wondering if I could update my graphics card.

  These are my characteristics.

  Operating system
  MS Windows 7 Ultimate 32 bit
  CENTRAL PROCESSING UNIT
  Intel Mobile Core 2 Duo P8700 2.53 GHz 35 ° c.
  45nm Penryn technology
  RAM
  4.0 GB Dual-Channel DDR2 @ 399 MHz (6-6-6-18)
  Motherboard
  TOSHIBA KSKAA (U2E1)
  Graphics
  Generic PnP monitor @ 1366 x 768
  ATI Mobility Radeon HD 4500 Series
  Hard drives
  488 GB TOSHIBA TOSHIBA MK5055GSX peripheral ATA (SATA) 31 ° C
  Optical drives
  CARPET * a DVD-RAM UJ880AS ATA Device
  OHO O9QBOTEF0DU SCSI CdRom Device
  Audio
  Audio device high definition

  Hey Buddy,

  Upgrading the graphics card is not possible because it s fixed/soldered to the motherboard. See also this article and other threads here in the forum:

  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm