Toshiba HDR5010 DTT recorder will not turn

Similar Questions

• Tecra M9 - sometimes that it will not turn on

  Hello.

  I have a Toshiba Tecra M9 who has a problem. Sometimes it will not turn on. You must remove the battery and press the power button. When it loads will work fine until I have move or take it upward and then hangs and crashes. Then, you must take the battery out so he can turn it back on if it will be in all.

  I tried to reload xp, tried without battery, tried a known good ram in both slots, a different hd and took part to see if I can see something loose, I have now run out of ideas.

  any help would be good

  Thank you

  Hello

  Which is really strange, buddy... In my opinion, that sounds like a hardware problem, what do you think?
  You should contact a technician for laptop (authorized service provider). Guys can verify and Exchange defective equipment parts. Maybe a mailfunction of the motherboard or the CPU

  By the way: you have updated your BIOS? If this is not the case, to do this, first!

• I have 6 phone is dead.  Will not turn back on

  I have 6 phone is dead.  Will not turn back on

  See Troubleshooting in the paper support. If your iPhone, iPad or iPod touch won't turn on - Apple Support

• I went to pay my own Bill Bill of my family, now nothing will work if I'm on WIFI, no internet, my IMessage/Facetime will not turn on. I've tried everything. Help?

  I went to pay my own Bill Bill of my family, now nothing will work if I'm on WIFI, no internet, my IMessage/Facetime will not turn on. I've tried everything. Help?

  Honestly, this sounds like a problem of carrier. Are you able to make/receive calls or send and receive text messages? I would first check with the carrier to make sure that your phone is still set up to use mobile data. Something was accidentally deleted when they merged your bills.

• K010 ENVY: my laptop will not turn off

  Hello

  When I shutdown/hibernate/standby/resume my laptop, it will die completely.

  All programs will be closed (when stop or restart) and I think that OS will also close. But the laptop will not turn off. Power LIGHT and fan will stay on.

  And when I try to Hibernate, everything is ok, but I have the same problem.

  Whenever I have to turn it off by holding the power button, otherwise the battery will be discharged.

  After manual turn off, when I turn it on again, everything works correctly:

  -If hibernation: OS will continue to last situation.

  -If start/stop: OS works normally without error or warning.

  After sleep, OS works from the beginning. Because the data stored in RAM and will be deleted after power off.

  Perhaps a portable automatic perevent equipment turned off. All the drivers are up to date.

  Is there a parameter/software to check and fix my problem?

  Thank you

  Hello

  You are welcome

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• installed Windows 7 for 30 days works very well. Now I want to activate. Get this error 0x800700D code... Windows 7 not WILL NOT turn ON NOW online

  NEW HP computer bought in September, already updated to Windows 7 with HP upgrade kit. I installed Windows 7 for 30 days works very well. Now I want to activate. Get this error 0x800700D code... Windows 7 not WILL NOT turn ON NOW online. Also can not get a pop window to activate by phone. HP says that I must fully restore Windows Vista x 64 Home Premium AGAIN at the factory all MICROSOFT updates, and THEN... so I can reinstall Windows 7 upgrade. Why now only after 30 days Windows 7 refuses to ACTIVATE! Nothing but run between Microsoft and HP > Please HELP without having to reinstall EVERYTHING on my computer.

  Please go to http://www.microsoft.com/genuine/ and click on the button to validate Windows, and then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  -Online Windows XP: double-click the executable file to run the tool.

  -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

  2. after running the tool, click the Windows tab and then click on copy to the Clipboard.

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new post in the appropriate Microsoft Genine Advantage forum and paste the results of the WGA diagnostic data in a detailed post: http://social.microsoft.com/Forums/en-US/category/genuine

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• MSN will not turn on it just says: upgrading, but the upgrade entirely custom install it... GETS about 58% then freezes

  MSN will not turn on it just says: upgrading, but the upgrade entirely custom install it... GETS about 58% then freezes

  Quote your full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) when you post in a forum or a newsgroup. Please do it in your next reply.

  Your problem has nothing to do with the Windows Update feature. Contact MSN Support. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Have VFC Z216Gx/b, which suddenly will not turn on.

  Have VFC Z216Gx/b, which suddenly will not turn on. AC is on but nothing happens when you press the button 'on '.

  Hello Bob,

  Welcome to the community of Sony.

  Try to perform all the steps here: https://us.en.kb.sony.com/app/answers/detail/a_id/35540/c/65%2C66/kw/35540

  If the problem persists, contact Sony Service support here: http://esupport.sony.com/US/perl/service.pl

  Kind regards

  Miguel

  Note: If my post answered your question, please mark it as an "accepted Solution".

• my laptop will not turn on after a recent windows update

  Windows recently did an automatic update on my laptop and need to reboot to complete. However, it will not turn on at all now. I tried to run the install disc and used to attempt to repair my system and yet it is said that it is not repairable. Ive also tried to restore to a previous point, and yet, he won't do that. Help!

  Hello

  1. the updates are was?
  2. what exactly happens when you try to start the computer? You get the error message?
  3. What are the error messages that you receive when trying to run the system restore or Startup Repair?

  Step 1: Use the option last good Configuration see and check if you are able to boot to the desktop.

  Reference: http://windows.microsoft.com/en-US/windows-vista/Using-Last-Known-Good-Configuration

  Step 2: Check if you are able to boot into safe mode and send back the same.

• My laptop will not turn off...

  My laptop will not turn off, even if I push the power button for 10 seconds.  The only way is to get out my battery and unplug the unit.  It started immediately after an update about two weeks ago?

  Hello

  ·         This happens even when the power chord is connected?

  ·         What is the brand and model of the laptop?

  Method 1:

  I suggest you to check the power settings on your laptop in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Method 2:

  I suggest you put your computer in a clean boot state, and check if the problem still persists. Click on the link below to find out how to perform the clean boot in Windows vista.

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

   

  Method 3:

  I suggest updating the latest video drivers on the manufacturer's Web site, click on the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Check out these links for help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/power-plans-frequently-asked-questions

  I f the problem persists I suggest you to contact the manufacturer of the laptop and check if it helps.

  Kind regards

• my printer will not turn off

  Office Jet 6500, wireless, printer will not turn off.

  Disconnect the power from the back of the printer for 30 seconds.  Plug in and turn on.

• Pavilion dv2415nr laptop. It will not stop. I downloaded the software and it will not turn off.

  I have a laptop dv2415nr Pavilion and it will not turn off.  I recently downloaded some security software and it is not stopped since the download.

  Hello

  I recommend that you make sure you have your license key for webroot. Uninstall the software and reboot. If that solves the problem, it's time to go to the Webroot support and ask their tech support that it.

  Kind regards

  ERICO

• TREO 755 P HEEEEEELLLLLLLLLP! Phone will not turn...

  Lately my 755 p will reset on its own, but it always comes back to the top it's very annoying. Juice my phone reset itself again, but now it will not turn back. It keeps going back and forth between the 'electric access' screen and the "palm". I took out the battery and left for several minutes, but I still get the same screens. Anyone has any suggestions on how to fix this shit? I'm really starting to hate this phone.

  You will need to hard reset the unit. KB. Palm.com enter article 887

  Message relates to: None

• Toshiba cd/dvd drive will not read or eject or anything like that!

  Cd/dvd driver for my Toshiba laptop will not work. It lasted about a year, then he became gradually sporadic to read/write or ejection and by last winter, he stopped all together. I've uninstalled and reinstalled the drivers for it, and in Device Manager, it says that the device is functioning normally; every once in a blue moon it will suddenly eject, but then if you put something in nothing happens, even not with the original disks. With the repair utility, it says something like unreadable media, at best. I'm a little confused as to what is happening here, so, what steps should I take to verify if it is indeed the drive disc or something in the software?

  Thanks, Bruce

  Hello

  You may need to check with Toshiba Support, documentation online & drivers and their forums
  for problems known.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  --------------------------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Google MX Records will not delete.

  I have a problem with the domain name and set up emails. I added the domain name after that I made a new delegation of the name of the BC.

  I put the e-mail settings to use the service of BC. It returned an error indicating that it could not add specific information for MX records. But he showed the list under MX records.

  When I went the e-mail settings, he stated that I used an external for email service provider and change my settings. I'll be back... it's all for the services of BC.

  Then I edited the MX and modified so that it uses Google Mail. Who is responsible. Then I turned back on it to use BC for email services. Now, he entered the records MX seen BC AND Google email services services.

  so at the instruction of a BC Chat Support rep, I deleted everything (including domain). He said that he took off everything completely. But when I look now, the domain name is gone, but all the MX records are still there, and it will not delete any of them. The same applies to DNS advanced settings for Google.

  What can I do to fix this!

  

  Hello

  I'm afraid that this seems to be a buggy.

  I created a case (#37761) on your behalf to have support to study this new.

  They will answer directly through your case.

  Kind regards

  -Sidney