Toshiba pc with graphics software

Similar Questions

• Tecra M7: Problem with graphics.

  I have a problem recently with my Tecra M7.

  I have unwanted points and lines on the screen and also sometimes the screen is blank or vision pauses for several seconds.
  After my experience with desktop computers, I thought it should be the GPU, but I have no idea how Nvidia NVS Quattro works.

  I recently installed a new Windows XP Tablet to check if a problem with the software, I have also installed the latest gpu drivers of the site so I don't know that this is not a software problem.

  This may happen the other thing that GPU? Is it possible to replace the GPU if there a problem?
  I bought my laptop on Nov 2006, so almost 2 years, how many years is the warranty period for the gpu to the United Kingdom?

  Thanks in advance.

  Hello

  Connect the external monitor to your laptop and see if the problem still occurs. If Yes, I'm afraid there is problem with the graphics card. Unfortunately the graphics card can be exchanged separately. The entire motherboard must be exchanged.

  There is no warranty period for each component material, but for the laptop as a product. It depends on the country of purchase. Try to check the warranty on http://gedb.toshiba.com/

  Good bye

• Remote Graphics Software: Remote Graphics Software activation failed

  Hallo,

  I had to replace an old workstation with HP Remote Graphics Software (the workstation of the sender, the machine with the reception part is always the same) on this subject.

  Since the installation of RGS 6.0.1 on the new machine, I get a pop up whenever I connect to it:

  Advanced features activation failed

  Already, I discovered that this has something do with activation without the software work.

  Version of the sender is 6.0.1 as shown above.

  Version of receiver is 7.0.1.

  There are two different versions, because it was setup on the old sender (with always the same receiver machine) and it worked very well there.

  I also tried the newer versions of the sender, still does not.

  As far I knew the remote software activation should occur automatically when having an internet connection.

  I have internet and no proxy or something fancy.

  By coincidence, I found an article that describes the manual setting of the license server in the island of receiver config.

  There was still an old man and I changed it to the last (I hope):

  　

  15.0.92.201

  Same settings for the firewall on the old and the new sender's machine.

  He worked with the old machine, we also have another pair of workstations transceiver, which work fine as well.

  I now use the license file, from the old machine to the new machine.

  Could it be a problem (although I did not see a MAC address restriction in the license file itself)?

  Best regards

  n7c

  To activate the speed of HP or STROKE with RGS receiver versions 7.1.1 (or earlier version) the activation server address must be changed by editing the Configuration file of RGS receiver or using the receiver RGS (details below) Configuration tool.
  RGS receiver Configuration file
  The RGS receiver Configuration file, rgreceiverconfig, is located in both
  C:\Program Files (x 86) \Hewlett-Packard\Remote graphic Receiver\regeceiverconfig (Windows)
  / etc/opt/hpremote/rgreceiver/rgreceiverconfig (Linux)
  Locate the Rgreceiver.Registration.IpAddress property in the file, it uncomment and set it as follows:
  Rgreceiver.Registration.IpAddress = 15.0.92.201
  RGS receiver Configuration tool
  With RGS 7.1 the server address can also change with the receiverConfigApp.exe on Windows or receiverConfigApp.sh on Linux. The address of the server is in the Activation tab.
  Also find URLs for the authorization of RGS user guide
  http://h10032.www1.HP.com/CTG/manual/c01624233.PDF

  Best regards;
  REDA
  I am an employee of HP
  Please click the White Star Kudos to say thank you for helping.
  Please check accept as Solution if my help has solved your problem.

• Satellite A300-146 - cannot play games with graphics

  I have Toshiba Satellite A300-146, model No.: PSAJ0E, 1 GB of RAM, Intel Dual core 1.87 processor, chipset Mobile Intel (r) 965 family.

  I can play some games like hitman silent of assasin on fullscreen and with graphics.

  But the problem is that a game could not open correctly IE after you open the game, he becomes 16-bit or not graphicsless. I tried these games = need for speed - pursuit and need for speed - undercover, the same problem occurs. I tried in windows XP and Vista.

  We all know Roadrash. I played this game in computer III pentium no value correctly... but I can not play in my laptop...

  Please help me to recover from this problem with the graphics.

  Sul

  Hello!

  Check the system requirements for the game. Satellite A300 is not a high-end gaming laptop and maybe some new games couldn't work on this laptop.

  Maybe you need to reinstall your laptop with the Toshiba recovery disc. I put t have another idea so try and post your result.

  Good bye

• Satellite P200 - 14 H - problem with the software after reinstalling Vista whindows

  I have a Satellite P200 - 14 H, who bought systems Activ of Romania. I got a Toshiba DVD with an image pre-configured Windows and my driver's license windows vista Home premium. After several blue screens windows crashed after 5 days. It was a software problem. I am a network administrator and I need several virtual machines Linux vmware server Windows.

  The DVD provided with the laptop is not really suited to my needs to reinstall windows because it throws my entire hard drive and is not an option. I took a friend a DVD windows vista Home premium and using my key from the sticker on the back of my laptop I reinstalled win without deleting all of the hard drive but only the partition c. I downloaded all the drivers of your site even if I found them really hard (model PSPB6E because that model PSPB6E I don't find it anywhere) everything is good except that "Flash Cards Support Utility" and «» Hardware Setup' give me the following error: "serial number is invalid '. I don't know what to do to be able to use the function keys I knew which are installed by 'Flash Cards Support utility'.

  If it is not good that I did give me another solution that does not need to wipe entire HARD drive, but only the C drive and use the DVD that you have provided or give me access to some place to be able to download all the drivers and software that can be found on the original DVD (those above and to burn DVD and Norton internet security center and so on)

  Thank you very much and please be so kind to give me a solution quickly because I really need this computer and I am unable to use it.

  Hi Adrian

  I'll try to clarify a few things;
  First the drivers for Satellite P200 - 14 H PSPB6E series are placed on the page of Toshiba Europe and it of really not difficult to find.
  Secondly the Vista serial key, which is located on the bottom of the unit cannot be used with another copy of Vista OS! This will not work!

  You have installed the operating system Vista from the CD to friends, but you used a serial key that does not match with the Vista on CD to friends! As a result, you get the message error "serial number is invalid!"
  The utility of Flash cards is required to use the keys FN under Win Vista. It visually shows the use of the FN button.

  I would recommend another way of installation
  First, you must use the DCD from Toshiba recovery. Back up your data first!
  Then after installing the OS, create a new partition and install your favorite OS (Linux, XP, etc.)

  If you n t to use the Toshiba recovery but CD the original Microsoft CD Vista then you need to use the original series OS key that belongs to the MS Vista CD.

  Good bye

• Downloaded the new firefox and it told me that it does not work with my software, how do I go back to my old version

  I have a mac 10.5.8 software. I downloaded moxilla firefox 24 and has replaced the old version to download. Then I got a message that firefox 24 does not work with my software. How to bring back the old version?

  Hello patcouse, if you want to stay with you older version of the OS, then firefox 16 is the last version available that will run in this environment. for a download link, please refer to the Firefox no longer works with Mac OS X 10.5 (at the end of the article).

• How to connect a Toshiba TL838 with facebook profile?

  How to connect a Toshiba TL838 with facebook profile?
  When I try to connect toshiba generate email with info and links for connect facebook with toshiba accounts places but when I click on the links I see only errors.

  _ * EDIT * _

  * Ok I flashed the QR code with my phone and now is connect :) *.

  Moderators please close thead

  Post edited by: junioreks

  > Ok I have flashed the QR code with my phone and connect now :)

  Thanks for sharing!

• HP pavilion f002sm 17: hp pavilion 17 f002sm problem with graphics card

  OK Hi again, you help me with my problem with graphics card yesterday I install the driver for my laptop and I can play games, but I I look for tools of diagnosis and is in writing which is r5 graphics card which is built on my laptop and I have A7 graphical please help amd a8 6410 win 7 32-bit

  Hi @zumzo ,

  I understand that you have installed the driver and it works fine.  When you checked the diagnostics you became confused because it says graphic R5 but you R7.

  According to the specifications of your laptop you have AMD Quad - Core A8 - 6410 APU with graphics Radeon R5 (2 GHz, 2 MB cache).

  Here is a link to the 17-f002sm HP Pavilion Notebook product specifications to confirm this information. I hope that this eliminates any confusion.

  

• Satellite L350-214 - error with the software Reeltime

  Hello

  I have a Satellite L350-214 with Windows 7 Pro and have encountered an error with the software Reeltime, I uninstalled and reinstalled and still get the error below. Any help or assistance would be great

  Tony Miller

  Log name: Application
  Source: Windows Error Reporting
  Date: 2010-11-30 12:27:58
  Event ID: 1001
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: Tony-TOSH
  Description:
  Fault bucket 1223018385, type 5
  Event name: CLR20r3
  Answer: No available
  Cabin ID: 0
  Signature of the problem:
  P1: tosreeltime.exe
  P2: 1.0.0.0
  P3: 4a769d0e
  P4: WindowsBase
  P5: 3.0.0.0
  P6: 4b5950b7
  P7: a86
  P8: 18
  P9: System.InvalidOperationException
  P10:
  Attached files:
  C:\Users\Tony\AppData\Local\Temp\WER7C9E.tmp.WERIn ternalMetadata.xml
  These files are available here:
  C:\Users\Tony\AppData\Local\Microsoft\Windows\WER\ ReportArchive\AppCrash_tosreeltime.exe_25c5a6496c7 ad44943ce88637e3389e8a80bd45_07f0c745
  Symbol of the analysis:
  Recheck for solution: 0
  Report ID: d5b71327-fc74-11df-a596-00266c333aed
  State: 0
  The event XML:
  
  
  
  1001
  4
  0
  0 x 80000000000000
  
  37886
  Application
  Tony-TOSH
  
  
  
  1223018385
  5
  CLR20r3
  Not available
  0
  tosreeltime.exe
  1.0.0.0
  4a769d0e
  WindowsBase
  3.0.0.0
  4b5950b7
  A86
  18
  System.InvalidOperationException
  
  
  
  C:\Users\Tony\AppData\Local\Temp\WER7C9E.tmp.WERIn ternalMetadata.xml
  C:\Users\Tony\AppData\Local\Microsoft\Window s\WER\ReportArchive\AppCrash_tosreeltime.exe_25c5a 6496c7ad44943ce88637e3389e8a80bd45_07f0c745
  
  
  0
  d5b71327-fc74-11df-A596-00266c333aed
  0
  
  
  My system specs

  Hey,.

  If you get this error Reeltime, you should try Ccleaner. There may be a registry problem and CCleaner might solve this problem. This great freeware and easy tool which you can download here:
  http://www.Piriform.com/

  Check this box!

• H20 and movie back with matchmoving software

  No one knows what would be the rear measure equivalent film for the H20 for use with matchmoving software?
  It seems to be only a little bit of technical info supplied with the device itself.

  P.

  Hello Paddelli,

  I am a user of H20, but I Don t know what you mean exactly.
  Could you please explain that a little more understandable?

  Best regards

• How to use the "Toshiba controls" with other players?

  Heey

  I have a Satellite with Toshiba controls. How can I change so I can use the buttons for other media players and not only Windows Media Player?

  A dude sorry for the bad news, but I fear that it is not possible to use the Toshiba controls with another application as with WMP (CD) and WinDVD (DVD)
  I think that the utility was already programmed and designed to use only these two applications.

• HP20002D19WM came with no software (cyberlink) key and certificates of authenticity for windows

  I just bought the HP20002D19WM, which came with no software (cyberlink) key and certificates of authenticity for windows. I can't use any program cyberlink with a key number to enter. Also if I would give for somereason I wonder in my number of windows I would not be able to since I have ever trevieved it

  This is the original factory specifications for your laptop HP 2000-2d19WM. All Cyberlink OEM software should work without key, because it is not mandatory for the installed OEM mass products. Regarding the Windows product key, see Activation of Windows 8 product;

  • OEM Activation 3.0 (OA3) at the factory. A digital product key (DPK) is encrypted and installed on the motherboard BIOS during the manufacturing process. Windows 8 will be ignited automatically the first time that the computer is connected to the Internet. With systems activated by OA3, most of the computer's hardware can be replaced without the need to reactivate the software from Microsoft.

• Problems with the software of fax on 1536dnf

  Hi, I just got a 1536dnf all-in-one, and I have a problem with the software sending faxes. I can fax machine directly, but when I try to send a fax from my computer, I can't even get into the software. I get an "internal error" that there is no device detected. I installed it on my network, so about four different computers can access. I'm running Windows XP SP3 and any other function works fine (I can print to the printer from each computer, send and receive faxes from the printer itself, etc.).  Any ideas why this happens? I found zero documentation or help on this and any help would be appreciated.

  Thank you.   I was using FAX4Word plugin for Word.  It allows to easily print/fusion of fax machines.

  I answered my own question, but others may be interested in:

  I was buy HP printers since the time that first, they came out with the LASERJet House, I waited in line to get one at the then price of $700 or more.  I bought a HP product on average every 3 years after that.   All HP products were excellent quality and easy to use.

  Once I looked at the question of the use of the 1536dnf as a modem, I found that I was MUCH better off just buying a modem from "Zoom" $ 50 for my database driven fax needs rather than trying to send it through the HP.  If it is possible to use the 1536dnf as an intuitely MODEM, it is a solution too complex to simply get a modem to 'Zoom in' $50, which leaves my 1536dnf available for other tasks.

• Y580 has not come with any software to play Blu-Rays

  I recently purhcased a Y580 of the store exit with a Blu - Ray player drive in it, but to my knowledge, it did not come with any software to actually play any Blu-Rays.

  Must I pay for my own software just BR movies?

  It came with Windows 7 pre-installed - I have a program called Powe2Go, but nothing like PowerDVD 10

  
  

• Conflict with emulation software detected

  I installed Windows Vista Ultimate (32 bit), I installed one of my games called Sim City societies and I get the error message - conflict with emulation software detected.   I don't know what kind of program could be causing it. About 3 weeks ago, I installed this Windows Vista and installed correctly. All my other games work fine, t is right with this one I get the error message.

  Any help would be appreciated.

  Chuck

  I found some information for you. It is for more than a year since this information below was sent, they should have the problem resolved with an update now. Have you tried updating to the latest version?

  http://TheSims2.EA.com/mysimpage/blog.php?user_id=2612925&date=all

  (Text below was copied from this link).

  Sunday, February 3, 2008
  Electronic Arts has admitted there is a SecuRom issue, on the plateau of SimCity Societies and issued a URL where you can learn more on this subject. they know that there certainly is a problem.
  Worse still, Sim City societies totally sows as a product, that it also get error performance, which makes the game totally unusable. I bought today and I am back in the morning, because it does not load because of the error! More than half who buy the game cannot play because of problems with SecuRom or the runtime error!

  Here's a URL posted by a leader of Sim, their form of a master Maxoid/Sim:

  Author: SimLeaderSix profile
  Date: 22-Feb-08 04:17 PM PST (updated on 23-Jan-08 09:47 AM PST)
  Subject: Conflict with error message software emulation with Game Update #2

  Some of you receive a error message when you run the game after installing the #2 game update that says conflict with emulation software detected.
  We are aware of this problem and it will be corrected in the next game update (soon, with a lot of exciting things).

  Here's how to work around this problem and come back to play the game.
  1. find the icon of shortcut for SimCity societies on your desktop. Right-click on the icon and choose "Launch Analysis".
  2. you will be prompted by a message box asking if you want to start a crawl. Select "? 'Yes '. Note: Make sure that the disk is still in the DVD player.
  3 disc will turn upward and the analysis will begin. You will receive a second error of emulation. It is part of the analysis. Select 'Ok '.
  4. analysis file will be generated. The message tells you where to find the AnalysisLog.sro file on your hard drive. It also tells you to send an email to * address email is removed from the privacy *.
  5 Securom will answer you by email with instructions on the replacement of the simcitysocieties.exe file.

  You can find more information about this on our support site:
  http://support.EA.com/cgi-bin/EA.cfg/php/enduser/olh_adp.php?p_faqid=10703&p_created=1124384855&p_sid= $p_sid #secu
  in the section titled "other questions with SecuROM.

  We apologize for this inconvenience and will the be fixed in the next update!