Toshiba stor.e wireless adapter, WiFi password

Similar Questions

• Cannot connect Stor.E Wireless Adapter + 1 TB HDD in my laptop

  I recently bought a Stor.e wireless adapter for use with my partner Stor.e 1 TB HDD laptop but I can't seem to connect to my laptop.

  If I plug the HARD drive directly into my laptop everything appears also ok but if I connect via the wireless adapter that shows nothing. the instructions that come with the adapter are very poor, but after following the instructions stating "plug drive HARD adapter using the USB cable then plug taken adapter (AC power), the LED flashes of HARD drive and the lights on the wireless adapter showing 1, 2 green, solid = power, wireless = 3 green, strong." USB = blue.

  The disc shows hard on my Android phone and the android Tablet but won't connect, when you perform a scan for wireless on my laptop devices, the adapter cannot be found.

  I sent twice, the support from Toshiba on July 5 and July 10, but have not received the courtesy of a response although confirmation of receipt of my e-mail, so for them we will get back to you in the DAY a statement.

  ANY help with this problem would be highly appreciated.
  Thanks in advance.

  Hello

  Stor.E WLan adapter extends a USB HDD with the ability to access data stored via a WLan connection.
  This means that you must activate your WLan on your laptop and configure the Stor.E WLan adapter first.

  The 3 LEDS have the following meaning:
  Above 1 LED is on / off and lights up green if the adapter is running
  The LED 2 is WiFi link and turns green where wi - fi access has been established.
  The 3rd (first from the bottom) lights up blue when the HARD drive is mounted. Flashing LED means read/write mode.

  How to connect?
  Connect adapter to Canvio Stor.E WLan adapt to the B USB 2.0 (near the reset button) microphone connector and connect the USB HDD to the type A USB 2.0 connector.

  You will need to activate the laptop s Wlan and press the reset button (hold it long 4 sec). The Wireless settings, you should see the Canvio Stor.E open wireless card that you connect access point.

  Then, in the Web browser using IP address: "http://198.168.65.1" to access the settings page of the Canvio Stor.E wireless adapter.

  In the preview, you can see the current version of the firmware, storage devices, network access point information.

  The list of devices shows detailed information on connected devices.
  Within the network, you can find the devault sotre.e wireless adapter network settings

  Now, you can use an Android application called Toshiba Wireless Adapter to move files on the HARD drive connected to the WiFi adapter from your smartphone.

  You can also map the card wifi as a network drive in Windows system.
  In type of Explorer: \\198.168.65.1. then right-click and choose map network drive.
  In a new window, select the application letter to the new drive (Z) and click the Finish button.

• Toshiba 32RL933 - what wireless adapter I can use?

  Hello

  I have a macbook pro (latest version) which has intel WiDi and my tv has intel WIDI also remind that I could use the one I have in my house, but as I understand it, it is that I need a wireless adapter.

  I have one here at home, but it didn't work. (d-link dwa-140)
  I was wondering if it was my mistake, or if this adapter in question does not work on my TV.

  I would also like to know if the only one that works is the toshiba adapter or y at - it one adapter other than the toshiba that works.

  Thank you

  flaviotobi, after having read pages 13, 48 and specification of the pages (81), the manual of your model TV, (32RL933), the manual of English to me, at least, indicates that only the Toshiba dual-band wifi adapter is suitable for wireless networks and functions of WiDi.

  In my opinion, the use of the available USB only is a concern, this does not allow the use of the function of time-shift TV, because this feature requires the use of a flash or connected USB HARD disk drive.
  It is my opinion that the time shift function is more convenient than having the WiDi or wireless network card and find the cable system without problem, in my case.

  If I want to display anything from my laptop on the TV, I use HDMI, (via a HDMI auto-box switch), because I have multiple devices share available on my 32RL900A sockets and having only a USB taken is a little embarrassing, but as I have said in other forums, we buy what we can afford...

  donhe7

• Store.E wireless adapter Firmware

  Three questions:

  1. I can't find an update firmware for the device.

  2. I can't seem to find the components to build the new firmware for it (it is obviously using a linux GPL, etc.)

  3 Telnet seems to be activated... What is the username/password so I can't change, because it obviously is back.

  Thanks for sharing the link

• Toshiba stor.e connection of wireless network card

  Hello. I bought the stor.e wireless adapter and I am totally disappointed. I was expecting to connect to my WiFi router and then I could access it as a network within my normal system drive.

  Unfortunately, it creates its own wifi network and devices need to connect directly to the adapter for access. This makes the camera useless for me, because I wanted to access my files on my local network far enough away where the adapter signal does not reach.

  Is it possible to make it to fix on my local network and I can access it from there?

  A second problem is that the Android on 5 Android app does NOT work. 4.4, I can see the files, on 5 I can't.

  Totally threw the money. If these problems not corrected soon I would not recommend this product or anything affiliated with someone I know.

  The STOR. E wireless adapter can be used as part of an external HDD or SSD hard drive.
  It supports hard disks up to 2 TB, and it allows you to access the data stored on the HARD drive using the Android app.
  This is the main function of this STOR. E wireless adapter.

  You can also map the card wifi as a network drive in Windows system.

  In Explorer types:
  198.168.65.1. then right click and choose map network drive.
  In a new window, select the application letter to the new drive (Z) and click the Finish button.

• Toshiba stor. Connection wireless adapter E smartphone problem

  Hello world.
  I have a shop. E wireless adapter I can not connect with some devices. When I use my laptop, it works perfectly. I also tried with a s4 Galaxy and a Note 2, both work.

  My Samsung Galaxy 4 marks used to connect to this subject when I was on 4.4 kitkat firmware, I could access my hard drive without any problem. But since I upgraded 5.0.1 is not connected to its network Wi - Fi. I updated the adapter android app wirelessly on game store that shows an improvement on the lollipop. Network adapter is displayed on my rating 4 but when I type the password it does not connect. When I remove the password protection, it connects to the WiFi but I can not access my files.
  I also have the problem of connection with my sister's computer, it shows the Wi - Fi, but can't type the password.
  Does anyone know how to fix this?

  Thank you so much everyone.

  Hello.

  I would like to add that my sister's laptop is on windows 8.1, that would cause it not to connect?

  Thank you

• Toshiba stor.e tv + WIFI settings does not

  Hello!

  I ve recently bought a Toshiba stor.e tv + and when you try to connect the drive to the router via wifi is just doesn´t work.

  I connect to my wifi network, I give the WPA password, I choose DHCP, and upon acceptance, it takes looong until what it returns to the screen first.
  So I ve noticed that when you select the network, under "Wireless Setup" mode, it says "on *: DHCP is not ready!

  All the world is facing something like this before?

  I ve connected the HD to the router via a cable network and it s fine.

  Thanks for your help!

  Hello

  I found an update of the firmware on the European driver Toshiba Stor.E TV page.
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

  choose: Options-> drive-> multimedia hard disks devices-> 3.5 StorE TV +.

  Now you should be able to download the latest firmware.
  After this attempt to set up the WiFi network once more!

• How to fix his jerky in PA3455U Toshiba bluetooth wireless adapter?

  I have Toshiba bluetooth wireless adapter PA3455U with Toshiba bluetooth stack v 8.0.0.12Tsoftware on Windows 7. When I use it in the A2DP profile I get his jerky.
  Tell me please how to fix this?

  Have you checked specification for this old piece of hardware, including system requirements?

• I want to set a password for the Toshiba StorE Art3 500

  Dear Sirs,

  Toshiba storE Art3 500 GB external hard drive, I bought and I have the following problem: I would firstly a password for opening, but hard drive ever asks me the password.

  Pls let me know what I need to do that he asks me a password for opening of the disc, or when you open the files stored.

  Thanks in advance.

  Hi mate

  AFAIK the Toshiab STOR. E ART 3, 2.5 "includes pre-loaded® NTI BackupNow EZ Software.
  http://www.nticorp.com/en/us/product/backup_now_ez.asp

  This software helps you secure and back up data. It provides a system and file & folder backup complete.

  It seems that only the backup can be secured with data encryption and protection of password (up to 256 - bit).

  Check this box:
  http://www.Toshiba-multimedia.com/global/manuals/store/datasheet/STORE_Art3_Datasheet.PDF

• Belkins wireless adapter recognizes not all wifi networks

  I have a Belkins wireless adapter for my pc and try to connect to a wireless network. My adapter recognizes not all wifi networks and I know that there is on the functioning of the House. How can I fix it?

  Laptop?  If you know that there is a wireless network in your home because the other computers are connected to him, the most likely cause is that the wireless adapter is disabled (a physical switch or a combination of keys Fn + Fkey).

  For additional help, please indicate the make and model of your computer (and your wireless adapter, if it is not integrated), as well as the version of Windows you have, including the service pack.

• Try to connect iPhone 3 g to WiFi, impossible to find the WiFi password as it is grayed out under wireless properties.

  Original title: I need help to connect an iPhone to my wifi? Please, I beg you!

  Hello! :) I recently got an iPhone 3 g from my friend, to use as an iPod because I can't afford the package of data that requires smart phones. Well, I can't find my Wifi password! :( I tried and do the "show characters" in wireless properties, but it won't let me. The box is... used output so you can not click it, unless you click on the box where the password is typed. And when I do that, the entire password disappears from the box! :( And there is also a box in the 'Connection' tab that says "Activate the WLAN connection settings" is unchecked. Should it be checked?  Help, please! Thank you very much!  :)

  Hi Morgan,

  . Who is the Internet (FSI) Service provider?

  I suggest you contact the ISP password Wi - Fi.

  Please follow the link that has the same problem suggested by Kevinbelow: http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/wifi-password/f649e026-cd80-4a99-89ba-761c0bf1d31a

  For reference:

  5 steps: how to set up your network home wireless:

  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx#fBid=zE71jpqZdXU

  For more information:

  I suggest also you to post the same question in the Sub forum.

  Contact Apple Support communities:

  https://discussions.Apple.com/community/iPhone?CategoryID=201

  I hope this helps.

• I can not connect my Smartphone to my connectiion of Wifi computers via my wireless adapter

  It worked fine until I put in a new wireless adapter. I am sure that in my attempt to reproduce the configuration/connection of my cell phone Wifi signal with the new wireless adapter

  I was not able to make it work? I'd appreciate any help. Thank you

  Hello

  1. is detected in Device Managerwireless adapter?

  2. what happens when you try to connect to your phone?

  3. do you get any error code or error message?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the network troubleshooter, and check.

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Turn on the Windows Firewall temporarily off the power and check.

  Enable or disable the Windows Firewall:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  WARNING: Disable Antivirus\Firewall temporarily, then check the issue. Sometimes they may be in conflict. Please make sure that you enable the antivirus software\firewall after the test to keep your computer protected.

  Method 3:

  Try the steps in the following Microsoft article and check if it works.

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Hope the information is useful.

• Slow WiFi on Qualcomm Atheros AR9485 wireless adapter on HP Pavilion 500-120EA 8.1 Windows

  This wireless adapter is extremely slow that causes ping high during the game. The game I tried was League of legends. The artheros adapter showed the ping MS 1000 +.

  So I decided to see if the necessary driver updated. When you go to Device Manager to update, it showed that she needed no updates.  Also checked on the hp site and it showed that I have the latest version of the driver. So I checked the Atheros website and I didn't have the latest version of the driver. So I intalled the latest driver at 10.0.0.263 10.0.0.270.

  Yet once I tried the game to see if there is an improvement with Internet and again he showed my ping 1000 + Ms. has not changed at all. No improvement.

  I did troubleshoot and it sort of something I do not know what but. No change.

  I also changed the powersaver maximum for the wireless card. No change.

  Several times I looked at task manager network, it shows send and receive to be at 16/08/32 Kbps or sometimes even zero Kbps. The table looks very small and its value on the chart was of 100 Kbps.

  However, I don't see a difference during the videos to youtube or browsing the Internet. Here, the speed is very good. Even during the speedtest, speed showed a ping from 43ms. sending / receiving packets are indicated in 00' sKbps Mbps. The table is not stable it flucatuates strongly.

  So I change my card a blekin N300 wireless and all the problems I've had are solved. The ping playing League of legends is 40-70 m send it / receive packets similar to the atheros AR9485 rae but I've seen go up to 88 Kbps at its highest level.

  So what can I do to fix the Qualcomm Atheros AR9485 wireless adapter?

  Any help is appreciated.

  What can I do else?

  Just an update to someone else who has had this problem for the channel 11 wireless channel setting should do the trick.

• Problem with access point or wireless adapter

  Hello world

  tried to connect to my WiFi, but the convenience store detects that the problem with access point or wireless adapter.
  The drivers are up-to-date and functioning normally. There were discussions on BIOS but I don't know if I would be able to complete the task without bricking your laptop.

  Is there any online support?

  Hi smert

  Your message is not really useful.
  Why? Because no one knows all the details of the laptop, wireless network card system...
  So please would you be kind enough to provide more details.

  But despite the missing information, I recommend:
  (1) reset your router WLan
  (2) check the connection to the WiFi unsecured. (of course for testing purposes)
  (3) check the different (WPA/WPA2 AES, TKIP) encryption

• Satellite A660 - Broadcom internal wireless adapter does not work

  Hi all

  My first post to this forum - I have a new laptop of Toshiba Satellite A660 - only had for about 4 weeks and it turns out be a disaster for me...

  Firstly - I spend weeks getting everything on and configured as I want - then the hard drive begins to die...

  I just returned it service center Toshiba and NOW wifi has stopped working...
  Internal broadcom wireless adapter doesn't work - but according to windows and built-in Diagnostics it works...

  HOWEVER - when I try to use wireless with the built-in adapter may not detect all wireless networks...

  I then plug in my adapter netgear usb wireless backup and I can pick up and connect both of my wireless home networks...
  I am moving abroad in a few weeks and need to know that my laptop will work/be reliable and not have any problems-if anyone can help me with this, it would be much appreciated.

  John.

  Before starting the scan for available wireless networks you have activated WLAN card correctly?
  Orange is WHAT turned on WIFI?