Toshibia e-studio200s start-up of the printer/copier problems

Similar Questions

• I have a form in which the text area can be developed to accept more text, but the text does not appear on the printed copy.  How can I get the text to print?

  I have a form in which the text area can be developed to accept more text, but the text does not appear on the printed copy.  How can I get the text to print?

  Hi robinm6200,

  Make sure that you have selected 'Document and annotations' under 'Comments and forms' when printing.

  

  Kind regards

  Nicos

• Re installation Dell is 920 printer says spooler service must be started. How to start and get the printer to work?

  Windows XP... Dell desktop computer and printer

  Although Christopher has correctly described a way to start the Printer Spooler service, chances are that he won't stop even once until you remove the problem that caused its judgment in the first place.

  Often, but not always, the print spooler stops because there is a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Use of the special procedure for printers Lexmark described below and follow in its first Article.  If still no joy, use the alternative method that is linked below.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.

  A special procedure for computers that have or had a Lexmark or Dell-badged Lexmark printer.

  Open a command prompt window (start > run > cmd > OK)

  Type the following in the black command prompt window and press enter

  dependent on the spooler of sc config = RPCSS
  output

  Note that there is no space before the =

  If you want to use a Lexmark or Dell-badged Lexmark printer after having done the above, you will need to reinstall it.

  Alternative to the method of his Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Connection to the printer driver problem

  I am trying to connect to the printer (hp business inkjet1100) that is connected to a computer running xp (sp3 pro) to my computer laptop under vista (home prem x 64). That just seems confused reading this way: (printer) >>>(xp/desktop)<(vista aptop).="" i="" already="" have="" a="" network="" set="" up="" and="" can="" share="" file="" with="" no="" problems,="" so="" i="" thought="" it'd="" be="" easy="" to="" connect="" to="" this="" printer.="" i="" was="">

  I try to connect to the printer by going to control panel > printers > add printer > network printer > the printer name after what in fact share on the xp computer (the name displayed on the computer to vista so there no problem). While vista has attempted to connect to the printer (bless his heart), but had a problem (no surprise), he couldn't find a driver and asked me to manually find the .inf file. No problem, just download the driver for the hp site, right? Evil.

  Apparently there is no driver for my printer for windows vista, however there is a solution. You can use the drivers for the printer series 1000 and basic functions should work (I hope it includes printing). The problem is that workaround tells me to manually configure the printer (port, pilot, etc.), then reconnect the printer to the computer (the problem is the printer is not connected to the computer in the first place).

  Now I consider myself fairly well with the computer and fix most of the problems without help (and unfortunatlly end up helping a lot of family with their problems), but it's just annoying. I decided that it's time to call in the experts (from India).

  I choose the live chat, because it always seems faster and I haven't had one that had playing music while I'm waiting (some may consider something positive). The problem is that I need to find my serial number and product number. I copy down the 2 easily labled numbers, but that is not good combonation. So, I searched for 'find the product number', and I get a page just like what I get (finally some lucky). After clicking on printers, I get to a page called "find the name of your product." At this point, I give up on the hp site and just write down every number on the back of the printer. Finally the stars aligned and I can start to chat with someone. A couple of auto messages pop up and then he asked me to confirm the information, I'm just entered (if she was wrong how do I live chat?), then continues to inform me that my warranty has expired and it will be $ 25 for support. I ask him if there is any other type of support, and he says that the best he can do (probono) is to give me a link to a Web page on the site of hp (I've been there believe it or not), I thank him for his time and move. I hope that the expired warranty matter here (but if it ignores just this part that was a total lie just to see if you would really help a guy without a guarantee (to test if you were really good people or just simply...))

  Thanks in advance for your time

  Additional details:

  Laptop: AMD, Vista home prem 64 bit

  Office: Intel, XP Pro 32-bit (x 86) Home

  The following has worked for me, allowing me to manually select the driver

  Another method 1. 1. click on the Windows icon > Search > printers Type and press ENTER. 2. click on 'add printer '. 3. click on "add a local printer. 4. click on ' create a new port:'. 5. do not change the "port Type:'." By default, it is selected as "Local Port". Let it remain the same. 6. click on "Next".

  7. in the small ' Port name: "window, type the following command under" enter a port name:'

  NOTE: Names must be exactly the same. They are case-sensitive.

   

  \\computer name\printer name

  For example: If the computer name is 'John' and the printer name is "HPprinter", you must type the exact name with all characters, including spaces.

  This is why in this case it would be the following:

  \\John\HPprinter

  8. click on OK.  9. click Next and complete the wizard. (It will now install the printer and driver) I used the driver of the 7400 series for my 7550 but it works.10. Try to print a Windows test page and check the functionality of the printer. 1 click on the start icon on your control Desktop.2.Select Panel.3.Double, click on the printer icon.4.Select and right click on the printer HP Photosmart 7550 series icon.5.Click on properties.

  6. in the Properties window, click on Print Test Page tab it starts printing a Page of Test Windows

  2

• The folder administrative tools devoid of orders for the print spooler problem that is stopped.

  I could not install my printer because the spooler is stopped.  According to Windows help, the problem can be solved by administrative tools.  But the biggest problem is: the Administrative Tools folder contains anything other than "Windows SuperShell Modules.  The Service order through which is accessible the print spooler service is NOT there.  Is there another way I can make the spooler running?

  Hi francisco a.sanchez,.

  I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• slow down the printing/copying

  I have a Deskjet F4180 all-in-one printer. A few days ago (4/5), he went into a "snail" printing mode. I tried to print something on mapquest when I noticed this. Everything since then has been mega slow. I tried to copy it and he did the same thing, slow. I uninstalled the printer and rebooted but still get the same results. It prints but takes more than an hour to print a 3 page document. You can help me solve this please. It was working fine before that.

  Hello

  1 hour to print 3 pages? Indeed, it is very slow. Try the following:

  -Check if the print quality is set to best Mode. If so, bring it back to normal or project

  -Do a print head cleaning. The option must be in the Panel menu before or from the HP software

• HP Envy 4500 All in one printe: copy problems HP Envy 4500

  The printer works well, but I can't do on my envy of 4500 copies.  When I press the 'Start copy black' or 'Start copy color' nothing happens.  I just replaced two cartridges with HP ink cartridges.  The scanner doesn't work well anymore.

  Hello

  Such a most likely occurs as a result of a problem with the scanning hardware.

  Follow these steps to solve this:

  http://support.HP.com/us-en/document/c00587971

  If the product of the repairs are needed to fill this form to contact HP support, be sure to select your region by clicking on the country of change:

  https://support.HP.com/us-en/contact-HP/product/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5304876

  Shlomi

• Check the printing sorting problem

  In our checks check printing program do not come in order. On research I discovered that the check numbers are considered to be rather in the form of text and number, so to solve that I am trying to convert the text to a number first check number and then use the sort expression. I am using now, but in error...
  
  <? sort: (<? xdofx:to_number(PaymentNumber/CheckNumber)? >)? >
  
  Could someone point me on whats wrong I do here?
  
  Thanks in advance for your answer.
  Dinesh

  use

• Pavilion HPE: when PC starts the printer starts printing a document

  I have a printer HP Photosmart 5520. For a few days every time when I start my PC, the printer automatically starts printing a document. It's always the same document.

  I think it's something that remains in the memory.

  I can't get out. Passing off the coast and on the printer does not help. There is no wainting documents to print.

  Hi @ivux,

  Welcome to the Forums of HP Support!

  I understand that you the same document continues to print on your printer Photosmart HP 5520. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that when restart you the computer does not resolve the issue, I know how it must be frustrating for you.

  Is the document something that you sent to print already or is it a diagnosis for the printer page?

  If the document is one of your own, it is probably corrupted. To try to resolve this, please follow the steps in the order presented.

  Delete the task and restart

  Whenever a print job is sent to the printer, a file is created in Windows. Sometimes, these files are corrupted and causing problems. To reset your printing environment, remove these print job files manually and restart the computer and the printer.

• Printer Officejet 5740: can not find the claim code to register the printer Officejet 5740

  I printed the map which is supposed to have the claim number, but it's not about it, there only diagnostic results.  I can't find it on the box or the other.  This printer is going to get knocked down a star in a review to be a PITA for the program installation, but right now I need the application number if my wife and I can use it for work and college classes.

  Hey there @douglasrob!

  Thanks for posting on the HP Forums!

  EPrint is when an e-mail address is assigned to the printer.  Once this electronic address is assigned you can then send emails to the e-mail address of printers and the printer will print the email.  If the printer cannot connect to Web Services which means that eprint is not connected either.  The reason why you are able to print from the iPad is because it communicates through your network send printing to printers IP address not the Eprint address.

  When the devices are connected to the network (router) it means other devices connected to the same network may be.  Connecting to Web Services the printer attempts to access the internet through the router.  The printer is connected to the network, but something is not allowing it to connect to the internet or the Web Services server.

  One suggestion would be to change the DNS (Domain Name Servers) on the printer.  If the automatic DNS in the printer is incorrect then the printer will not be allowed access to the server of Web Services via the router.

  To change the DNS of the front of the printer, you must:

  1. Tap the settings icon.
  2. Press the Network Configuration.
  3. Press wireless settings.
  4. Scroll down, and then press advanced settings.
  5. Press IP settings.
  6. Press manual (static).
  7. Press OK and ignore the message.  You do not change the IP address just the DNS.
  8. Scroll down and press DNS address.
  9. Type 008.008.008.008, and press done.
  10. Press on apply.
  11. Return to the start screen on the printer and try to activate Web Services again.

  Let me know how it goes.  If this does not work, I should be able to locate another step to try!

• HP 1050a printer has no action the printer

  I use printer 1050A printing fades. I am trying to clean the heads and to see the ink levels, but I have no printer hp "action of the printer. I used the updates but still nothing. No maintenance task, no printertoolbox. What can I do? Is there a driver? I use the serial printer help instructions.

  Thank you

  Hello

  First unplug the printer and select uninstall in the Start Menu of the printer folder.

  Then download and install the latest version of the software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109412-2&cc=us&DLC=en&LC=en&OS=4158&product=5068681&sw_lang=

  That should restore the latest version of the HP software that inclides the current Assistant HP printer.

• Photosmart C6180 - unable to delete the document in the print queue

  My Photosmart C6180 shows a document in the queue which can not be removed causing the error message and unable to print documents from my laptop.

  Hi Thomastwhilaker,

  I'd love to help you remove the paper that is stuck in your queue and get you print again.

  First post please returns with the answers to these questions.

  1. Is the printer connected wirelessly or with a USB cable?
  2. The printer is connected directly to a wall outlet or a surge protector? (It is preferable to connect directly on the wall)
  3. You have all other printers HP installed on this computer? If so, do you still have the printers?
  4. Is this a HP laptop or another brand?
  5. What operating system do you have? Mac or Windows?

  At this point because you said your 'portable' I imagine you have Windows. If you have not already tried the HP print and Scan doctor, please do and let me know the results. You will see a key, a yellow exclamation point, a red X, or a checkbox then each point tested. If you have a Mac, skip the following steps and let me know.

  

  Click here to download and run the utility > HP print and Scan Doctor

  If the problem persists, I suspect that if restart us the spooler, remove the driver and re - add the printer that we may be able to correct the problem. Follow the instructions below to perform these tasks.

  Restart the print spooler

  Hold down the Windows Logo key () on the keyboard and the 'R' to open the Run dialog box

  • Type services.msc and press enter
  • Locate the print spooler and double-click it to open the spooler properties
  • Make sure you that Startup type is set to automatic, if not please click the menu down and select automatic
  • Under Service status, please stop the server, wait a moment, and then click Start

  Remove the printer from the server to the printer properties

  1. open the folder "devices and printers".

  2. choose "print server properties.

  • Win XP - with no printer selected, click 'File' then 'server properties '.
  • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
  • Windows 7/8 and 8.1 - Select any printer in the "Devices and printers" folder and click on "Print server properties" above.

  3. click on the "Drivers" tab at the top of the window "properties of the print server.

  4. choose the printer that you want to uninstall, and then click 'remove '.

  5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

  If you get an error "in use", restart the computer and the printer, and then follow the steps again.

  Re-add a printer

  Open start > all programs > HP folder > folder printer > HP Setup and the software if you do not see the program installation and software, but you see the printer icon, double-click the printer icon to start the installation and the software.

  Please let me know if this does not resolve the problem, or if you need additional help, I'm happy to help you.

• HP DeskJet 2546B: Deskjet 2540 stops in the middle of the print page

  I was not able to connect my computer to my pc via wifi a colledge, so I connect my printer via the usb port on my pc (I use the white cable provided with the printer that connects to the back of it). Impression of normal word documents is very well, but I have been tring to print several pages of a pdf file and it stops a few lines of print. No error message, no warning sounds, just stops. The power light flashes too.

  The cord is still plugged, it says in my devices on my pc that is always connected, and I can see the print job in my what. I can delete from my without any problem and it will spit the rest of th page. If I leave without doing anything, he will spit the pages finally after one minute. It will always work in Quebec of the printer, but it won't do anything with it.

  And I can't seem to convert the content of the pdf in word format to work around the problem.

  What can I do to fix this?

  Hi @Roket107,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you are using a HP Deskjet 2540 all-in-One printer with a Windows 10 computer and when you try to print from a PDF file the print job stops printing without any error messages, but seem to print correctly from MS Word. I would like to help.

  I would start by checking the printer software installed by downloading and running the tool HP Print and Scan Doctor. This tool can diagnose and solve many problems of printing software and printer.

  It could also help to ensure that the updates of Windows are updated.

  If HP Printy and the Scan doctor does detect no problem with printing software, perhaps that the software used to view and print PDFs must be updated, or uninstalled, then reinstalled.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Got paper stuck in the printer and now will only print proofs. How to reset the printer

  Got paper stuck in the printer and now will only print proofs. How to reset the printer

  It looks like you may have some saved jobs in your queue that need to be removed.

  Here's how:

  To clear the print queue, stop the print spooler service and delete all the jobs/print pending.
     
  You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
        
  To stop the Print Spooler Service, click Start, run and enter in the box:
         
  services.msc
         
  Click OK to open the Services Applet.
         
  Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
     
  The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
     
  If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).

  Do not try to start or restart the Print Spooler Service immediately.  You must remove all print jobs backed up first...
     
  Then, delete all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send the to the printer again.
     
  Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
     
  C:\WINDOWS\system32\spool\PRINTERS
         
  Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
         
  Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
     
  After the reboot, check again the Spooler Service for printing and the 'Status' column for the print spooler must be read "started."

  Submit new failure of print jobs.

• OfficeJet Pro 8500 has: the printer does not

  Got a message on the control panel may not print, replace the depleted ink cartridge (magenta) to resume printing.  Nothing changed when I replaced the magenta cartridge.  I replaced it once again without change.  I keep getting the same message and therefore impossible to print.

  Hello @dejen and welcome to the Forums of HP, I hope you enjoy your experience!

  If I understand your message that you are having problems with your cartridge.  I would like to help!

  I recommend to start by removing the printer ink cartridges and reset the power supply.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  Then, I recommend following the steps in this document:

  A "ink cartridge appears to be missing or corrupt" control panel displays error on the printer

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!