Touchpad gestures stop working after sleep in Windows

Similar Questions

• Touchpad gestures stop working after sleep Windows *.

  This is the best advice ever! I tried and immediately was saved! Thank you!!

  For laptops Asus on Windows 8 - actions no longer work after sleep on touchpad
  

  
  

  Manual method

  • Open the Task Manager, look for the "Asus Smart gesture Center" process Complete the task.

  Script method

  • Script: Create a .bat somewhere file with the following code:
    Taskkill /IM AsusTPCenter.exe /F

  When you run the bat file, it will kill the process.

  Both: when to end the task, that it seems that the other process from Asus running it will detect it and start it, allowing the multi-doigt touch again.

  To make the batch file:

  1. Open Notepad and copy/past this command:Taskkill /IM AsusTPCenter.exe /F
  2. Then click on save as and type .bat (remove .txt)
  3. Replace all files . the drop-down list and click Save

  That's all! Whenever the problem appears, double-click the file and it will fix it!

  Thanks to Teknokraten @ superuser.com for this solution.

  I am so grateful for your help! I had the same problem that my touchpad stop working after the mode 'sleep'. I had the problem over the years and no one could help me. And it worked! So thank you very much!

• Satellite S50T-B950 - touchpad does not work after update of Windows 10

  Hello "Toshiba."

  After the update for Windows 10 I have a problem with the touchpad does not work and became come boiling Forum and found that the solution is to uninstall "MOMENTUM Input Device" to "Device Manager", finally worked the touchpad, but alas multi touch properties such as: "zoom/minimize gestures of scrolling and two-finger" no longer work

  Please help me solve this company of Toshiba problem

  The same theme has been already discussed and resolved in this thread:
  https://Forum.Toshiba.EU/showthread.php?83885

  Then please follow the proceedings in the other thread to avoid misunderstandings

  by the way: here is the link to pilot site Toshiba win 10:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

• Touchpad does not work after upgrade to Windows 8

  Hello

  I have just upgraded to Windows 8 with my HP Pavilion G6, and since then my Touch Pad stop working.

  Although the scrollbar on the right to work, but the work of the stop scrolling 2 fingers. Pls what can I do?

  oyedepo1,

  If you need drivers from the drivers from your computer's Web pages:

  Install the software and drivers from the HP site

  Driver for the TouchPad, if you need a new, is in the category

  Software-Solutions > > driver - keyboard, mouse and input devices

  See this file for more information:

  Difficult Touchpad / ClickPad

  Display brilliant tips

  Click on the star of congratulations !

  It's a nice way of saying 'Thank you' for help.

  Although I strive to reflect best practices of HP, I do not work for HP.

• Satellite S50-B-15F - Touchpad does not work after update of Windows 10

  Hello

  Yesterday, that I've updated my S50 B 15F Satellite with Windows 10. Now the Touchpad no longer works. Tried enabling in the settings. This works except for the left and right buttons. I reinstall the software momentum but no change. Any ideas how to solve this problem?

  Thank you!

  Joram

  Here another thread where the issue could be resolved:
  https://Forum.Toshiba.EU/showthread...-to-Windows-10

• Z410 Touchpad does not work after upgrade to Windows 10

  Hello

  I have the Z410 (2 years) and since the upgrade to Windows 10, the TouchPad does not work!

  • I updated the driver with no luck to make it work.
  • Solutions used Lenovo Center, digitised material and nothing shows a hardware or driver missing.
  • In Device Manager it shows any missing material.
  • Settings > devices > mouse & Touchpad... The touchpad tab shows her where this versioned (Alps Touch Pad - 8.201.1611.252)

  Any tips?

  
  

• L540: Microphone is not working after sleep 10 Windows

  I'm new in the thinkpad family and I recently had a L540.

  I decided to put my system with W10. My problem is that of the object.

  When the laptop awake the microphone does not work. It is recognized by Windows, but the cannot hear anything.

  I tried to reinstal the drivers or dissable the unit, but nothing.

  It only works after the restart.

  Any suggestion?

  Thanks in advance.

  Problem solved with the BIOS update!

  Thank you very much.

  Bests.

• Speakers Logitech Z313 stopped working after upgrading to Windows 7

  I delayed upgrading to Windows 7 until after I graduated from College just for this reason. I just installed Windows 7 and my Logitech Z313 speakers that worked perfectly well in Windows XP are not recognized as material.

  There is no yellow! device drivers, I have the "High Def Audio" largest later device driver installed. Troubleshooting Windows does not detect a problem with anything. My speakers are working properly. When I disconnect or shut down the PC, I can hear the feedback and the pop Logitech has no drivers for these speakers because they must be detected automatically by the system when they are connected. I tried unplugging / plugging in different ways.

  Can anyone help?

  Thank you.

  Hello

  I quite had the same problem and found the solution: you must uninstall your device, then go to control-online Device Manager Panel => are looking for the "!" symbol on your list, then right click on 'properties' and 'details', you will see a list with weird names (ex: HDAUDIO\FUNC_01 & VEN_10EC & DEV_0662 & SUBSYS_18497662)

  Copy it and go to , paste it into the search bar, and then select your 'Windows' (for me it was 10 Win 64-bit), download the driver and install it. Fact! :-)

  Problem solved ^^ not by Microsoft or Logitech, unable to understand this problem, caused by the update of Windows 10... (-_-(

• Satellite L855 and Win8.1 - Touchpad stops working after the login window

  New laptop running windows 8.1 Touchpad works for about 30 seconds after windows starts and then stops. I have tried downloading drivers the most recent of the Toshiba site, but it does not solve the problem. Tried the function keys of the touchpad, but it's not the question. Called Toshiba support and they suggest to send it in for a factory reset.

  I have also a problem with AMD graphics will split after that computer screen goes into sleep state. Downloaded and installed drivers more recent for it on the advice of Tech support, but not fixed, or the other.

  I'm a little worried because a research shows these two problems are not uncommon and IV ' e spent a lot of time to copy data and install the software, don't want to lose him and wasting time waiting for factory reset if I need to return ot.

  Anyone have any ideas?

  Factory reset is the best way to solve this problem, but you have upgraded your machine following the instructions step by step http://www.toshiba.eu/innovation/generic/windows8_1-message/?

• Toshiba with vista touchpad mouse stopped working after the long sleep.

  I left my Toshiba laptop with Vista only for a few hours and when I came back I had a lot of difficult to resume. When he did power to the top of the screen is fixed to the external monitor, and touchpad mouse will not work.  I did a system restore to several days ago, but it did not help.  I also installed service pack 1 and 2, hoping that would be useful, but it did not.  What should I do to get the touchpad mouse works again? I have the back of the screen, but not the mouse.

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  Read the info on sleep disorders in the tutorial above.

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Also read this tutorial; as well as the 'related links' at the bottom of the links above.

  See you soon.

  Mick Murphy - Microsoft partner

• Sound stops working after sleep mode in Windows 7

  I just installed Windows 7, map its Xonar HDAV 1.3 Slim, ASUS M4a78 Pro motherboard with processor image ASUS.  Works fine until it goes into sleep mode.  When he wakes up, the sound does not work.  When I test different devices, the sound bar saves the output, but no sound appears.  Update BIOS and drivers and that didn't help.  All system sounds and sounds MCE or anything like that do not work until I restart.  I saw the patches for this problem in Vista, but it will not yet install in my computer because I have Windows 7.  Thanks for any help!

  Install the latest Windows 7 compatible sound and display drivers.

  New user, see:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  All the best!

• Satellite C50D-B - 12 c - TouchPad does not work after upgrade to Windows 10

  Can someone suggest a solution to get the touchpad working again after windows 10 upgeade?

  You may need to remove / uninstall the preinstalled software touchpad control panel → programs & features.

  After this reboot of the laptop.

• T430 Webcam stops working after sleep

  I have a T430 with Windows 7 Enterprise SP1 and a built-in webcam. All current Lenovo drivers/software packages are installed. The webcam works fine until I put the computer to sleep. After he falls asleep, the only way to get the webcam to work again is to reboot. When I try the webcam software "Lenovo - Web Conferencing", I get "the camera is used by another application. I reinstalled the drivers and the software with the same result. Does anyone know how to fix this?

  Looks like what happened. I think that the pilot of the T430 series they Lenovo has for the built-in camera is not compatible with Windows 7 (even though it says it is).

  Of my other post: I had to remove the device through Device Manager, while checking the box that says "uninstall driver" and then reboot and let windows automatically installs a driver for the camera. I currently have no problem, and I use the version of the driver camera of Microsoft 6.1.7601.18208 (as dated 21/06/2006). I still have the characteristics of the virtual camera to the ThinkVantage Communications utility. So far no problem. I am running Windows 7, 64 bit.

  (PS: I use actually the factory driver now, after running the restore disks. My driver now says: Ricoh, 16/02/2012, special 1.2.1.16).

• Satellite S50D-B - TouchPad does not work after update of Windows 10

  Hello

  Just bought a S50D-B Satellite last week. Comfortable with technology. Updated to Windows 10 (3rd I did on the machine). New laptop is the only one to give problems. Tried allowing in settings - seems to be gaining 10 Auto turns off the device, which is strange. Indeed, it works (somewhat) with the exception of the buttons left and right. Tried to reinstall software momentum but no change. Any ideas?

  Thanks in advance,

  Peter
  There may be only a Highlander (1timothy 2:5)

  The issue has been resolved as you can read above:
  the ELAN touchpad driver update is released and it seems as well as other updates for Windows 10.

  But of course, MOMENTUM software/driver must be installed in the case to receive this update!

• Subwoofer stops working after upgrade to windows 7. __

  After the upgrade to Windows 7 my subwoofer is no longer in effect. I tried to uninstall the driver and the re - install the latest drivers, but it does not work. Strange thing, it is that the sub will work in test phase of the program, but not in music playback. Any help would be appreciated.

  Finally figured it for people with Realtech HD audio drivers! All you do is, right-click on the volume in the taskbar.  Click playback devices. Click the speakers properties. Access improvements. Activate bass management. That's all! Alternatively click on correction of the room and set the PB to have more control.