Touchpad no longer works
Hello
I have a HP Pavilion g6 - 2226tu Notebook PC, windows 8, 64 - bit. Product number: C9L65PA
All of a sudden my touchPad has stopped working. There is this yellow exclamation next to «Synaptics PS/2 Port TouchPad»
The driver status reads this device is not present, does not work properly or does not have all its drivers installed. (Code 24) '
I tried the usual uninstall and re-setup but without result. Please suggest a fix.
Thank you
Hello
Please follow the link given below in case you still have the same issue could be a problem with the Touchpad itself that needs to be replaced.
Use and troubleshooting of the touch pad (Windows 8)
Tags: Notebooks
Similar Questions
-
Satellite C70 - A - 15 d - Touchpad no longer works
My touchpad no longer works. Windows 8.1.
New drivers can not be installed. MOMENTUM: error message bad touchpad. Synaptics: obviously empty zip file after downloading.
Any idea where I can get the zip file of work?
Are there function keys that enables / disables the touchpad?
Thanks for the tips!
+ The message was edited: model number added to the object.
many answers but we cannot reply if we do not know what model of laptop you have, so please the exact post model name of your laptop by Satellite.
-
Satellite A350-212 - touchpad no longer works
Hi all, I have some problems with my FN keys, my touchpad no longer works, in addition to this, when I press the FN key, I don't see any icon on the top of the screen... Two days ago, all this did not work properly... An error is given by the program called Tossiba assist, its written exactly this way: this system cannot use accessibility... Could you please help on this issue?
My operating system is Windows vista 32-bit (service pack 1)Finally, sorry for my English if I make mistakes, it is not my mother tongue...
Thanks in advance
Try to restart flash cards.
Start > all programs > Toshiba > utilities > restart Flash CardsAfter doing this press FN button several times to see if Flash Cards are still on the top of the screen.
If you see Flash cards again use the FN + F9 key combination to activate the touch pad again. -
Touchpad no longer works after update BIOS on Satellite A500-1GL
Hello world
I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.
Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
After that Windows 7 (x 64) started the touchpad no longer works...I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...
I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
But unfortunately it still doesn't.Now, I'm out of ideas, can anyone help?
Is there a chance to get the older version of BIOS to downgrade it?Thanks in advance ;)
Hello
It seems strange that after update Bios touchpad no longer works.
> Is there a chance to get the older version of BIOS to downgrade it?
To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
Advice for the future; Do not touch the running system.Good luck!
-
Split 13 x 2 touchpad no longer works
I have a new split of HP 13 x 2. The touchpad no longer works. This is the latest driver Synaptics Touchpad (17.0.10.9). I'm under WIN 8.1. I have to close the session and then again for the touchpad to start working again. Any suggestions?
Took a little digging on the forum but found this solution that worked for me in solving the touchpad freeze problem:
Hope this works for you.
-
Touchpad no longer works after the clean boot
Own, I started my laptop today, following the steps on http://support.microsoft.com/kb/929135. After the first reboot in clean boot my laptop touchpad scroll bar stopped working. I can now scroll using only the arrow, or quiet mouse clicks on the arrows at the end of a ScrollBar to the screen. In addition, I can't select any text with my touchpad now. All this happened after the boot process. What has gone wrong? How to fix?
Original title: scrolling Touchpad no longer works after the clean boot
Hi lauranne.
What is the brand and model of the computer?
I would like to put the computer into normal mode and check if your able to use the touchpad.
See the section "How to reset the computer to start normally after a boot minimum troubleshooting"
How to perform a clean boot in Windows
http://support.Microsoft.com/kb/929135If you still have questions, please refer to the article to give below, and follow the instructions.
Mouse, touchpad and keyboard with Windows problems
Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you more
-
Satellite C55 - Touchpad no longer works
Hello
The touchpad on my C55 no longer works.
After you restart the touchpad works until I signon to Windows. After this, all functions will stop.
A few days ago, I think that some Windows updates have been launched.
Is that what someone else has had this problem and can you give me a solution please?
In addition, immediately after the entrance to Windows, it works always, but after a while, he stops. This rings a Bell?
The driver for the touchpad seems to be ok.
-
Mouse Touchpad no longer works correctly
My touchpad mouse no longer works correctly. I'm unable to double-click, even after changing the speed setting in the control panel. In addition, items are selected when appropriate without a click. This could be a virus or a definition that has been accidentally changed? I tried to restore to a previous point, when things were working properly and that did not help.
Check with your PC manufacturer for support. You may need to update your driver.
-
Synaptics Touchpad no longer works correctly
Hello Internet!
Hear my fate and tremble: I recently updated my drivers from the official manufacturer website Synaptics touchpad. Before the update I could press twice on the upper left of the touchpad to enable and disable the touchpad. It is a convenient feature that I have grown very fond of. However, after the update this feature no longer works! I'm so devastated... I really enjoyed watching the pretty light outline of my touchpad to turn to a hurt red when it has been disabled. I suppose I could return the drivers back to their old form, but I wanted to check if anyone knew a separate fix so that I could have as well the new drivers and the old features that I loved so much.
My model number is: A6Y49UA #ABA
My operating system: Windows 7
Thanks for your help, I remember you when I am the dictator of the world.
Hi @El-Nacho .
Welcome to the HP Forums!
It's a great place to find answers.
You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and moreI see that you updated your driver from the manufacturer's website. HP recommends that the drivers listed on the HP driver page. These drivers have all been tested and known to work properly. When you install the drivers of the manufacturing site, they may or may not work properly with your laptop. Can of OEM and sometimes change a driver so that it works properly with your exact laptop.
Download or update of software and drivers for HP computers
If you don't have a problem with the old driver, I suggest you do a roll back driver.
15.3.11.0 is the version recommended for your laptop and Windows 7.
Here is a link to the driver download page if you need it. HP Pavilion dv6-6c10us Entertainment Notebook PC Drivers
Good luck!
-
Synaptics touchpad no longer works on Qosmio G50-133
My Qosmio G50-133 suddenly lost it of keypad touch, it no longer works, the panel of mouse control shows the synaptics without any inside information tab.
I uninstalled, rebooted my windows 7 with no luck and I just can not find a driver for it on the toshiba site or anywhere...Sosmeone there a clue?
Hey cool.
Thanks for the comments. -
Satellite U400 - 10L - touchpad no longer works
Suddenly, my touchpad doesn't work.
Any suggestions that might help with this problem?
My laptop is Satellite U400 - 10LHello
I think that you should first check if the touchpad is not disabled.
Check the FN + F9 key combination.If the touchpad still does not work, try reinstalling the driver for the touchpad.
Welcome them
-
Satellite M70 PSM73C - touchpad no longer works
For some reason any my touchpad isn't working.
After trying unsuccessfully to get it working again, I found the software installation driver (tpdrv-xp - 603056.zip) on the Toshiba site.
I thought I would uninstall and reinstall to fix the problem, but when I try to start the installation I get the cryptic error messages.The shield of the installation does not work yet.
Anyone who has had success or knows how to get this software to install the touchpad?
Thank you.
What error message you get exactly?
To reinstall or update the driver for the touchpad, you should delete the old first in Add/Remove Programs, restart your computer and install the new version from the Toshiba site.
Check this box and post your result.
-
Touchpad no longer works after upgrade to VISTA on my M105-S3084
I recently updated my system to VISTA and since that time, my touchpad does not work. I tried to install all types of drivers, that nothing seems to work. VISTA indicated that the device works properly. All other devices work - just the touchpad.
Any idea?
1 million thanks!
AxelHave you checked if the touchpad is not disabled?
You can enable and disable the touchpad by using the FN + F9 key, but I don't know if it will work if you have not installed the correct drivers m.However, in my opinion, the touchpad does not work due to incorrect or missing drivers!
The laptop seems to be designed for the American market, and therefore, you should use the Toshiba site to download the correct Vista drivers!
http://www.toshibadirect.com/TD/B2C/home.toBy the way; It s always a good idea to perform a clean install an update!
-
Portege R600-10 q - Touchpad no longer works
Hello
My touchpad has stopped working. I tried to turn on and off with the FN keys and this did not help - can someone let me know what I can do to get it working?
brand
Hello
Maybe you should put the exact cell model and the OS you are using.
What do you think about this?In any case, what happens if you connect an external mouse? Can you work with it?
What is the other FN keys work? Perhaps only the utility ON / OFF touchpad isn t work and can be solved with a new installation.
In addition, you must update the driver for the touchpad.Good luck!
-
Satellite L305-S5921 - Touchpad no longer works
Thanks in advance for any help.
I had my laptop for about a month now, and about a week in I plugged a USB external mouse because I prefer it on the touchpad. One day I decide to unplug the external mouse and use the touchpad for a bit, but when I unplugged and allowed to the touchpad, touchpad does not work.
I tried the FN + F9 key combination several times but it does not work and I have also reinstalled the drivers for the touchpad repeatedly and they have not worked either. I also uninstalled the touchpad drivers and rebooted the computer, leave the computer to deal with reinstalling the drivers, but the result was the same.
Someone at - it other ideas or do I have to send my laptop in for repair?
Hello
Did you install additional software for external mouse?
-
My Satellite Pro A200 (PSAE7E) touchpad no longer works
Dear Sir.
My problem is my touchpad does not work, I usually enable it or disable it in a tab to hide automatic at the top of my desk (which was disappeared after I updated to Vista SP1), after that and accidentally stopped the pointing device driver,
I tried to re - install again but I could not find out who the good driver for my laptop is (ALPS Synaptics pointing device or pointing device)?
I tried to press FN + F9 key but I had no change that the touchpad is not working, so I have to use a USB mouse...
Can you help me please
Note that I'm using Windows Vista Business SP1, Toshiba Satellite Pro A200 (PSAE7E)
Thank you very much
Zaid
Have you checked the Device Manager? Normally, you should see what touchpad you have exactly.
So the latest driver, you can download the Toshiba site:
http://EU.computers.Toshiba-Europe.com-online support & downloads-download drivers onlineCheck it!
Maybe you are looking for
-
For some reason, Shazam does not start my Apple Watch. I select the app then I get spinning points for a minute that it displays the menu of the watch. I try again once I get spinning points for 1 second then it returns to the main menu again. I unin
-
Pavilion g6-1335sa: network drivers
Hi, I recently did a clean install of Windows 7 on my computer - but this has been removed and the network drivers, I can't access the internet. Please can you help to locate the drivers that I can reinstall it on the computer? Ethernet controller Ha
-
Satellite U400-10J does not operating system load, and it's brand new.
-
The serial number is not valid
Hi Acer, I tried to register my device. However, your site does not seem to accept the serial number. I tried using 3 different types of browsers and watched on your support page but no luck. Link posted for your cat to support doesn't seem to work e
-
While Facebook I can't access an assignment for youtube videos. any suggestions
I can't access youtube videos while on facebook, get a message that says (an error occurred, please try again later) any suggestions?