Touchpad not working do not properly after the update to W7
My DV5035nr has been recently wiped and upgraded to Windows 7. the touchpad is thrown around and driving me crazy. I went to the synaptics site and downloaded the proposed pilot, but the same problem continues to be. must I download another driver? Between the steps, I went into the control panel and deleted the synaptics driver before installing the new. the touchpad works very well when it is not a program or driver associated with it. can I run without additional software? any help at all would be appreciated... I'm not tech savvy enough to understand this point, but I can follow directions very well. Thanks in advance!
Hello lizslone,
Welcome to the HP Forums!
I apologize that your touchpad is crazy! One reason might be because there are no drivers Windows 7, as shown here: HP Pavilion dv5035nr PC drivers
I have a solution that can work, if you'd like to try:
1. go in Manager devices, then mouse and other pointing devices.
2. right click on the driver in question and select "Uninstall".
3. restart the computer. This will force the computer to install a driver based on the detected hardware.
Please let me know if you have any other questions. Thank you!
Mario
Tags: Notebooks
Similar Questions
-
App Walkman search works do not properly after the update of the lollipop?
Anyone else have problems with search app walkman? Yesterday it worked fine until I updated to the lollipop, when I wanted a song that she really was. Now he broke everything and can usually find the results only when I type in two or three letters. If I type less or more he finds nothing at all even though I know that I have these songs on my SD card.
I can find the songs very well if I manually scroll through all the albums, but that is slow and the pain of doing...
I've updated the walkman also application after I noticed this problem but nothing has changed. I also tried cleaning app/data cache, but it helps not at all.
move several albums for the internal storage and try again, look for a song that is on the internal memory.
-
I've updated to windows 10. .and I have installed the latest driver realtek audio on my laptop from the HP website.
The B & play 0 appears in the control panel and list of icons. But I am not able to change the mode(music/voice/movie) in the room B & O when you listen to music and watch YouTube etc .i have reinstalled the driver realtek audio, but the same problem appears. Please tell the solution for this problem
It does not work when I use my headset
Hi there @pavan_014.
Thank you for visiting the Forums HP's Support and welcome! I think the problem you are having is your sound and headphones since the Windows 10 upgrade.
Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.
Although you had already uploaded/updated new drivers, I would suggest trying to uninstall all the drivers of its current:
- Go to the Device Manager
- Click sound, video and game controllers
- Right-click on the audio driver
- Click on uninstall
- Restart your computer laptop twice
- Try the speakers
You can use the HP Support Assistant's drivers. Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated for Windows 10.
Are - what you happened to try the audio Troubleshooter? It might be able to solve your problem automatically.
You can find the great troubleshooting steps in document No. sound from speakers as well as resolution of the headphones and headset problems. This document contains several troubleshooting steps that may prove useful.
Please follow provided the troubleshooting steps, re-post and let me know the detailed results of the troubleshooting.
Thank you!
Have a great day!
-
When using liquify tool get w square pixels with change on a mask hiKey, don't know how to get rid of
Hi josuep,
Please see this link for the same problem: Photoshop CC 2015.1 liquefy clear result
-
OCR does not work on mobile devices after the update. How can I make it work?
Ocr does not work on mobile devices after the update. How can I make it work?
Hello
Acrobat Reader mobile apps (for iOS, Android, Windows Phone) is the free PDF viewers. They don't support OCR (Optical Character Recognition).
However, you can purchase the subscription online service called Adobe export to PDF and use it in mobile applications of Acrobat Reader to convert PDF documents to other formats (e.g. Microsoft Word, Excel, PowerPoint).
Have you already bought the Adobe online subscription service export to PDF? Would make sure that you're signed in with your Adobe ID to use the service?
-
iPad will not restart after the update iOS9.3. Should force us the reboot?
iPad will not restart after the update iOS9.3. Should force us the reboot?
By restart do you average will not turn on?
There seems to be a bit of a problem past, especially with older models of iPad 2. Some people have reported success after that restore their device via iTunes, for others that it has not worked and all they get is a message "bring it in an apple store.
Since it affects a lot of people, I think it's safe to say that the problem lies in the range of Apple. But I don't think it is recognized or no matter what put forward fix.
You can try to restore your device, or you may just be stuck waiting to see if a fix comes out.
-
Delete photos from my camera do not roll after the update to 9.3.1 IOS iPhone 4s, also the photo has not saved when taken by camera
Mhefzi86 wrote:
Delete photos from my camera do not roll after the update to 9.3.1 IOS iPhone 4s, also the photo has not saved when taken by camera
OK, thanks for sharing.
Maybe you can provide clarification comments on what happens when you try and what troubleshooting steps you did.
-
I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:
Firefox Pei
"C:\Program Files (x 86) \Mozilla" PEINothing happens with every order.
I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "
If you have any ideas, I had appreaciate that your expertise!
Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers. -
Photoshop and Illustrator is not opening after the update of Windows 10 anniversary
Hello!
After the update of Windows 10 anniversary, Photoshop and Illustrator can't open. What should I do?
Thank you!
not serious.
You get an error message or Apps do not respond when you try to open.
You can run the System File Checker to see if there are any problems with Windows OS after upgrade files,
https://support.Microsoft.com/en-in/KB/929833
As for the latest CC applications you need to install the latest package updates Visual C++ Re-distributable.
See the link below:
-
computer does not work properly after the update, because the screen is black.
Advice please! :-(
After an update there about 2 months, my computer has never worked properly after that I turned it back. My windows start page is longer there. My screen is black. The words are only in white and fluorescent yellow...
The only way I can go online to find Norton (is always at the bottom of the black screen) and go to help. I can get a search bar like that. Almost as if this black screen hides everything below. Computer is 13 months old.
My internet provider says it isn't them. Gateway said it's not my computer so idk what happened after this update.
Any advice would be so appreciated.
Thank you.
Hi Patty,.
Welcome to the Microsoft community. I would be grateful if you can answer these questions.
- You have installed the latest drivers for Windows 8?
- What is the model number for Gateway computer?
If you get a black screen after upgrade to Windows 8, it might be due to an outdated or incompatible graphics card driver. Update to the latest version of the display driver should fix this.
Try to remove all external devices connected to the computer and then try to start the computer and check if it works. Follow these methods and check if that helps:
Method 1: To resolve this problem, update the Gateway website. video card driver
Step 1: Check out these Microsoft items for additional reference:
Download and install the drivers
http://Windows.Microsoft.com/en-in/Windows-8/all-drivers
Step 2: If you are not able to find drivers for Windows 8 to HP support. Try to install the graphics drivers in compatibility mode and check:
Download your applications and devices in Windows 8.1
http://Windows.Microsoft.com/en-in/Windows-8/get-apps-devices-working
If the problem persists, proceed to the next method.
Method 2: I suggest to follow the suggestions provided in this Microsoft KB article and check if this can help:
Windows 8 starts with a blank screen after a standard or hibernation
http://support.Microsoft.com/kb/2756559/en-us
See also the suggestion provided by Scott (owner of Forum) from this thread and check if this may help.
I hope this helps. If you need help with Windows, let us know and will be happy to help you.
-
Acer X 1930 works does not properly after the factory restore
It did not work correctly since the restoration of my desktop Acer X 1930 under Windows 7. Now, it shows: "configuration of the Windows updates failed. Returning from the changes.
Could someone please help?
Hello, I had problems even when I went back to 10 Win7... The only way I could make it work just is for the first few newspapers in I had to restart my system rather often. I know that this is not a SOLUTION but is what I did...
Load Windows 7, let the updates for about 3 minutes... I first tried 8 mins but still many updates. So 3 works for me... I am also connected on wire on a Giga lan with Ultra fast connection to my ISP... So time could vary for you...
After 3 minutes, I had 20 to 26 update ready to be used. Restart the computer. They worked. Makes about 3 times. ON the 4th time I down load 90 updates to see if it would work. And he did very well. Then after that, I went to look at the missing updates to ensure that they were going to update or had... added some that were OPT... on on the last 50ish and they have all updated very well. But for some reason, if I let all try them and update from the beginning, they would fail. I think it's because they have tried to put in the updates before others will want that needed to be done first...
I do not work for Microsoft or Acer and it is only first hand from one of my systems. This isn't a fix only my way to make it work.
So if you have a connection interent fast and no more wireless I would say that for the first time you start your computer just let it run for a few minutes then go to the Start button and restart so you do a little at a time...
I would like to know how it works for you...
James
-
PP 2015.3 Edit to tape function suddenly not working properly after the update
I have maybe in a small percentage. I have grown to love PP and have been using it for controlling certain emissions tape HDSR. I think I went from 2015.0 a.3. The reading seems to have suffered in this update. I get now loss of images of PP did not keep in touch with the reading. So put together it on tape fails and insertion don't will go not to the point where there was a framework has fallen.
There are a few other issues that are easy to manage, but tried to go through telephone support on this issue.
-Insert video or audio over half the time after insertion is finished, PP gets stuck. The Strip was inserted but the glass remains and to pass to the next punch that I have to cancel the dialog box.
-PP will are not more than 8 channels of audio. -Final Cut 7 can arm all12, available on our SONY SRW-5800.
-After the 2015.3 update the PP would go through the motions of insertion on the Strip, but it would not actually insert audio, so if I was not paying attention you'd think they had set just a note QC. But no! PP just doesn't work. This problem has been resolved by removing the preference PP folder in My Documents on Mac OS X.
So my main problem still remains that reading is basic and is no longer usable for laybacks professional Ribbon. I had to go back to Final Cut 7 and snap a simple 422HQ to tape. There must be something that I am missing, but the time allotted to me to troubleshoot this with time etc etc is limited. What could have changed in the update for the functions to change the band which makes it unusable now?
I want to really just to install the old version, but phone support wasn't helping me with that and said I couldn't.
Mac Pro 5.1 12 Core
OS X 10.10.5
32 GB OF RAM
NVIDIA GTX980
PP 2015.3
Black Magic Decklink Extreme 3D +.
Video Fund 10.6.2
Tape recorder plugged with cable RS - 232 9-pin
Adobe must have heard our complaints. The new update of PP 2015.4 seems to have resolved most of the questions that we take. I always have a random frame dropped here and there. Export to tape option is viable again in PP 2015.4. I'm under PP 2015.4 with the latest drivers from the AJA.
-
After the last update, my game store does not work correctly. A lot of apps is not proceed with the installation an error...
Help, please
Hi Digambar,
Welcome to the community of Lenovo!
Please perform the below mentioned the troubleshooting for the troubleshooting steps:
1. go to settings--> Apps--> all Apps-> Google Playstore: clear the Cache, erase the data
Note: All browsing history will be get deleted.
2. If the problem is persists kindly update the playstore Google later.
3. make sure that the update of the system is up-to-date.Please come back to us if the trobleshooting helped you.
Thank you & best regards
-
fonts Mathematica does not properly after the senior at el capitan
I used Mathematica 5.2 on my MBP with Mountain Lion. After the upgrade to El Capitan, there is a problem loading the fonts and Mathematica does not load correctly. Any ideas? Wolfram has a package of fonts, but don't know what fonts to download or how to install them on my MBP. Any ideas?
Please, back up all data before proceeding.
Launch the application book fonts and validate all the fonts. You must select the fonts in order to validate them. See the built-in Help and support article for instructions. If the font book detects any problems, solve them.
Start in safe mode rebuild the font caches. Restart as usual and test.
Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or the boot volume is a software RAID, you cannot start in safe mode. In this case, ask for instructions.
If you still have problems, then in the font book menu bar, select
The file restore Standard ▹ fonts...
You will be prompted to confirm and then enter your administrator login password.
Also note that if you disable or remove built-in fonts, for example by using a third-party font manager, the system may become unstable.
-
My application does not work for two days after the update
ITI has been two days now my app is not workog knowing that I paid for a membership year after that I did the update it please help
We will post updates on the installation of revel problem in the following thread:
Maybe you are looking for
-
Re: Satellite P100-am6 - need driver for using Vista 64 SD memory card
Hello I need help. I recently updated my P100-am6 for Vista Home Premium 64-bit and everything works perfectly and I find software, drivers, and more for all components except the built-in SD memory card slot!It will not work and I can't seem to find
-
iPad pro independence, how long?
I am interested in the number of hours everyone is currently done on the iPad pro? My best is 15 hours. The brightness is set to a little less than half. I have app updating in the background off the coast and push and the location of the settings as
-
Windows Vista Home Edition suddenly not open attachments. How can this be corrected?
I can't open attachments in the email in the "MAIL" program in Vista Home Premium
-
is there a way to get my xp and win7 computers in the same network group? I wnt to use easy transfer but my new machine can not find the old
-
HP7500A printer use Visual indicators under the touch screen
There are Visual indicators 'print' named 'fax' 'scan', 'copy' 'web '. below the touch screen of my HP7500A multifunction printer. Initially, I thought that these are the access keys; There is however no working when I press on them. What is the func