Touchpad Tablet does not

Similar Questions

• AT10-A-103 Tablet does not supply power to the top

  Hello

  I have the following problem
  my tablet is not at all responsible.

  Despite the fact that I was able to turn on all the percentage indicates zero, and time when the connection to the wall outlet immediately turns off.

  Please, quick help and best regards.

  + The message has been published: name of the Tablet has been added.

  I put t know which device you have, but that looks like the battery isn't recognized by the system and therefore the Tablet does not work without the socket.

  Would it be a bad battery?
  Perhaps.

  Have you tried resetting the Tablet?
  Press and hold the power button / stop and the volume up button.
  After a few seconds the tablet should access the recovery mode.
  Now you should be able to choose the reset option that would set the default system Android tablet.

  But to be honest, I doubt that this could solve your problem, because to me, it looks like a hardware related issue.

• Tecra M7: Tablet does not work after closing the lid

  Someone had problems with the Tablet does not work after closing the lid on a Tecra M7? BIOS is 3.20

  Does not happen on hibernate or sleep.
  I have the set cover to do nothing on close.

  Hello

  What do you with Tablet does not work after closing the lid?
  Is - what the laptop freezes or what? What happens exactly?

  Closing the parameters adjustable lid to Hibernate or standby mode or no action.
  These settings can be defined in configuration power saver actions.

  If you have some problems with some Toshiba applications installed, I recommend you to reinstall the program and TOSHIBA common Modules that doesn t work properly!

  Best regards

• HP 10 G2 2301 Tablet: the correct charger for Hp 10 G2 2301 Tablet does not load

  The original charge cord for my Hp 10 G2 2301 Tablet does not load my tablet.

  Hi there @Bb16,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that your tablet will not charge with the charge lead. I'm happy to help you with this.

  as you said that you are using the correct charge lead, I understand this document for reference: G2 HP 10 tablets - the Tablet is not fresh, I suggest to try your adapter into a different electrical outlet, preferably with a direct connection to wall to remove any other question possible bad connection.

  Y at - there no sign that there is no power at all?

  The connector on the Tablet seems to be loose?

  If you have access to another adapter, also, try to avoid the card itself.

  If none of those who make a difference, then browse this document. Tablets - HP Tablet does not (Android 5.0/Lollipop).

  If at the end, you are still having the same problem, then please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• A2109 autorotation Tablet does not work

  Autorotation on my recently purchased A2109 Tablet does not work. I look in the settings and the field of automatic rotation has not been highlighted, so, I can't choose to turn it on. The Tablet has the Android OS jellybean and I've had to date, but in vain. Can anyone help?

  Thank you

  OK problem fixed

  It seems that screen lock switch is not the best quality. After Pentecost fidling it screen rotation is enabled.

• My touchpad lock does not work, even if the orange light is on, indicating locked buffer. Probook4420s.

  My touchpad lock does not work, even if the orange light is on, indicating locked buffer. Probook4420s.  Windows 7 32 bit.

  Hello

  If the amber light is on the TouchPad itself, try double tapping

  If that is not activate, try uninstalling the device driver course Synaptics pointing, then restart the computer and download and install the driver from the link below.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4145435&prodNameId=4145436&swEnvOID=4052&swLang=13&mode=2&taskId=135&swItem=ob-86824-1

  Kind regards

  DP - K

• touchpad mouse does not work

  For some reason the mouse on my laptop recently purchased does not work on the touchpad. But it works very well using an external wireless mouse. I have something off without knowing? Thanks for any help.

  Thank you all for trying to help. I solved the problem on my own. I discovered a small button with light and has an icon that looks like a Tablet next to the switch on the left side. I pressed it, the little light went off and the touchpad started working. I must have accidentally disable the touchpad when I turned on the laptop. You live and learn. Even the suggestions put forward by Acer support didn't understand this little button "secret."

• Yet Tablet does not not after update

  Yesterday I tried to update some new Windows 10 package, however first I have enough C: / / space. I tried to free space delete all my stuff (documents, requests... etc) by using the restore options (removing only my personal applications, docs not windows). After reboot I think it automatically installs the update and I had a little bright (black) screen after restarting again and it goes no further!

  Anyone knows how can I return it? I tried to stop him, but it does not work!

  Sorry to hear that.

  Did you turn off?

  Otherwise try the restart: press and hold the volume + button at the same time by pressing the power button. If it works, it will open the start page

  If all else fails, wait until the battery is empty and connect the power cable to recharge. After a few hours, try restarting the tablet.

  If everything fails, I think you should he sent to the service of Toshiba.

  With regard to the update of your reminder WT8 here are the safest instructions:

  1. from microsoft site, download the latest Windows 10 ISO file
  2. save it in the map SD WT8 Encore
  3. use the winrar or a similar application to extract the contents of the ISO file to another folder again in the SD card
  4. in this folder, right click on the file setup.exe and select "run as Administrator"
  5. the update process will start
  6 choose to keep your files and applications
  7. when he asks for more space, point again the sd card
  8. in some time, you will have the latest version of Windows 10 in the tablet.

  I suggest you use a 32 GB SD card for the Tablet WT8 Encore

  I would like to know what happened!

  BR

• Satellite U50T-to-10F - keyboard and touchpad MOMENTUM does not

  I have a Toshiba Satellite U50T-A-10F, who did the usual round off the coast and was updated last night won't however when I turned it on the wheel mouse and keyboard does not work I managed to get hold of because the touch screen still works, but nobody knows why it would update then?

  Tried phone support but only open from Monday to Friday, I took out of warranty extended thanks to God!

  According to the bulletin of Toshiba technical support document, the touchpad can be disabled only and using the function keys it should be possible to activate the touch pad once more.
  Touchpad doesn't work anymore after upgrading Windows

• Satellite U920 ultabook-Tablet does not start

  Hello world.

  Just bought the new laptop / Tablet 3 days ago.
  Other than Windows 8 fustrating me death, computer is wonderful...
  until today.
  Does not start!

  Turns on... but now those at home...
  I tried with the battery, but also the decision-making power.
  When I press the Start button...
  2 / lights go on as usual.
  Keyboard led lights as well.
  A that's all what happends...

  Finally, after a minute, the computer will beep 3 times slowly then close.
  No screen at all... not even a light coming from the screen...
  Quite annoyed that its only 3 days...

  Any advise?
  See you soon... Rob... Sydney

  > Just bought the new laptop / Tablet 3 days ago.

  The new book should work fine if it s not the case, then the hardware or software causing the problem.
  I think that it s material so why you n t contact your laptop dealer and ask for the new laptop.
  Replace this unit and test a new

• Satellite A200 touchpad function does not properly

  Hello

  I spent a lot of time looking for the solution to my problem, but without effects.

  My touchpad does not work correctly. I mean, I can move the arrow and click on the screen, it's ok. But all other functions (volume, mailbox and other "virtual buttons" don't work)-the so-called "hybrid".
  I am connected to the USB port on the mouse.

  If I disconnect it, there is no change - the touchpad works only in basic mode.
  If I change the double mode in the settings of the touchpad to "always in Dual Mode when an external device is connected" - and all the virtual buttons work.
  But what do I do to make the mode of double the work even if the mouse is not connected (so that the power button works)?

  Thanks for any help,
  M.

  I m a bit confused now and I don t know what exactly you want
  You're talking about the touchpad, mouse USB, bi, etc..

  I put t know what you mean with dual mode and maybe you should give us more information about your operating system.
  And that you use the touch pad or mouse USB?

  Can you post a screenshot screen or something else?

  I put t know if this solves your problem, but have you tried to update the driver for the touchpad? You can find it on the Toshiba site.

• Touchpad/cursor does not

  I have a laptop of HP 2000; can't find the model numbers, or anything like that.

  My touchpad just in case works when I opened my laptop this morning. I am using an external mouse right now but need access to the touchpad. I already tried the following:

  Reboot 5 times

  Try the function keys

  Toggle switch: there is no light above the touch pad and double tapping does not any changes in light or function of the touchpad

  Reinstall the driver for the touchpad twice

  The research of properties of the mouse: lists not touchpad as a mouse device.

  Thanks in advance.

  Try a hard reset:

  Remove the AC and battery:

  Hold Power for 30 seconds

  reconnect the battery and AC and see if this brings back.

• Touchpad mouse does not work on my Satellite L850D - 12 p

  Hello

  I had problems with my laptop since the beginning. The hard drive failed and the carpet of mouse and keyboard have had intermittent problems since day 1. Randomly, they stop working and will not work again until you restart.

  Recently the mouse pad often stopped to work prompting me to uninstall the Synoptics driver for this device. I removed the device from Device Manager and expected that when I rebooted windows driver would be. This was not the case. I reinstalled from the driver that I got from this site and now is without recognizing the mouse from the Synoptics software. Only the USB mouse that I plugged in worked and even then it often froze.

  I tried a soft reset of the laptop wiping my settings and more recently a reset. I think that it is purely a software problem.

  The mouse still does not work. Does anyone have ideas on this?

  Laptop is L850D - 12 p.

  Any help is well suitable.

  > I have tried a soft reset of the laptop wiping my settings and more recently a reset. I think that it is purely a software problem.

  The point is that, for software problems, the Toshiba Recovery disk should solve your problems of keyboard and touchpad. So, I think that this issue is NOT due to software problem.

  You mentioned that you had these problems since the first day buying hmm I m wondering why you did not contact the authorized service provider or a retailer of laptop for a fix.
  New devices are covered by warranty and in case of hardware malfunction; the guarantee covers the repair procedure.

  My solution: you can try to recover the laptop once more. Use the original Toshiba recovery disc. Also check if the BIOS is updated.
  Note: the touchpad should work even if the other Synaptics touchpad driver isn't installed. Why? The touchpad is controlled by the default Microsoft driver and current touchpad as touch and scrolling functions do not exist by default. Synaptics touchpad driver adds a few more features and functionality for the touchpad.

• Satellite L50 - after Win10 touchpad upgrade does not

  Brand-new Satellite L50-C03E laptop pad touch does not work. Upgrade to Windows 10. Tried using all combinations of F5, FN & F5, don't hit to swipe and checking settings and nothing works.

  I guess you can use external USB mouse.
  Connect it to the laptop and uninstall the old touchpad software / driver for Windows 10 system. You should find it in Control Panel → programs and features.

  After the the touchpad driver has been removed, restart the laptop and win 10 updates.

  It would be very interesting to know if this solution allows you to get the touchpad working again.

• 14IBY IDEAPAD 100 10 x 64 gestures of touchpad Windows does not

  I just installed Windows 10 x 64 fresh OS and all of the latest drivers with automatic updates from Microsoft Update Service.

  Touchpad has Sentelic driver 9.5.0.3.

  Gestures does not. Even scrolling.

  If the decommissioning of Windows could solve this problem - I'll do. Help me, very important things for me.

  I noticed that the touchpad is connected via PS/2 interface. It's a good opportunity to check the driver from another provider.

  Thus, Synaptics is my favorite.

  I downloaded the driver here http://drivers.synaptics.com/Synaptics_v19_0_19_1__C__x86-x64__Win10__Signed__MS_Win10_UXUI_PS2_SMbu...

  Then he installed to the system.

  Then replaced by "lenovo Touchpad" driver "synaptics ps/2"via device. windows manager.

  Restarted.

  And I voala, full functional touchpad to work, with all the advanced features synaptec and gestures, even on Windows 10!