Touchscreen stop working after updating IOS 9.3.2

Similar Questions

• screen iPhone touchscreen stop working after updating IOS 9.3.2

  My phone was working without any problem and update the IOS 9.3.2 jumps on my phone. I update my phone as I normally. Now, the screen touch freaking work not AT ALL!

  I tried a hard reboot I read MANY MANY MANY other users have this exactly the same problem. I tried to restore my phone and can't do same. Now my Itunes has decided on his OWN that is has an encrypted password that I NEVER put.

  I'm so SICK of Apple, trying to fix 1 thing in IOS updates only break 50 other things!

  Any help would be greatly appreciated. Technical support has been less helpful on the phone. They advised me to put out a follow-up movement in my privacy settings and it should fix the problem. It would be GREAT if the touchscreen works! Morans!

  iPhone 6, iOS 9.3.2,and WORSE NEVER UPDATE!

  I had problems with touch-screen with my iPhone 5 s immediately after the update to 9.3.2. It was very frustrating - the screen would bounce around to choose things that I wasn't tapping and scrolling fast and sometimes simply freeze completely for a few seconds. I've never had problems before update!

  I have not found how to fix 9.3.2,and but I managed to restore my OS to 9.3.1 (which solved the problem of the touch screen) until the next version of iOS comes out which will be hopefully resolve this issue.

  Here are the directions that I followed to roll back my iOS: http://www.gottabemobile.com/2016/05/16/how-to-downgrade-ios-9-3-2-to-ios-9-3-1/

• Anyone Bitmoji keyboard stop working after updating iOs 10?

  Anyone Bitmoji keyboard stop working after updating iOs 10?

  jerseryjones4 wrote:

  Anyone Bitmoji keyboard stop working after updating iOs 10?

  Someone posted on another thread a tweet from Bitmoji they are currently declining, but working on the issue.

• Bitmoji keyboard stopped working after update iOS 10?

  My bitmoji keyboard no longer works on my iPhone 6 since I have updated to iOS 10 today.  The emoji keyboard keyboard English (United States) both still work, but when I try to go to Bitmoji, it shows a black background that says: "Please enable full access. We need full access to retrieve your avatar... »

  I went into my settings and checked under "Keyboard" and switch "Allow full access" is enabled for the Bitmoji keyboard.

  I tried to restart my phone, deleting and reloading of the application and is gone in the settings and made sure that the "Full Access" switch was once again, however when I open messages and try and switch to the keyboard, I get the same black screen and note.

  Does anyone have any other ideas, or is having the same problem?

  I'm not familiar with this keyboard, however, will need a lot of app developers and content and still haven't, update their software to be fully compatible with the last software update (iOS 10).

• Why-AirPlay stop working after updating IOS 9.3.1?

  I have I have Pioneer receiver SC75 of home theater feature AirPlay. We threw iTunes music on it over the airtime from my iPad, my iPhone the iPhone to my wife 6 and 6. Recently, I've updated my iPad and iPhone iOS 9.3.1.  Since then, I have not been able to get AirPlay for each device.  However, my wife did not update IOS on his iPhone, and aiplay continues to work with its iPhone connection to the pioneer.

  What should I do to get AirPlay work again with my iPhone and iPad?

  Tim English

  Try to force reboot a device that does not work

  Restart your iPhone, iPad or iPod touch - Apple Support

  Also check (if you don't have it) to see that AirPlay is not disabled in the control center

• iPhone more replaced 6 speaker stopped working after update to iOS 9.3.4.

  iPhone more replaced 6 speaker stopped working after update to iOS 9.3.4.

  New speaker of iFixit. After replacement speaker works perfectly. With FaceTime, the call, music, etc. And IPhone running on iOS 9.3.3. But after the update to IOS 9.3.4 speaker stopped working. Several restarts and total content and deletion of parameter did not help.

  Axiomer wrote:

  New speaker of iFixit.

  It is a problem.

  iPhones are not serviceable by the user.

  You're on your own.  After this service yourself, you finished your warranty (if she was still in effect), and Apple will not help you either.

• G72-a20EM screen has stopped working after updating the BIOS F.48.

  How is it possible that BIOS update recommended could turn off the LCD screen.

  Currently I see almost anything on the screen, but vga port works. But increasingly,.

  Intel graphics card is not recognized.

  G72-a20EM screen has stopped working after updating the BIOS F.48.

  What can I do to fix that?

  Good news!

  I found the working version, and it is version F.08.

  Supposedly new version have different Active cables, and this is the reason why the screen is dark.

  So, case closed, everything is perfect.

• Touch ID does not work after update iOS 9.3

  My TouchID does not work, after the iOS 9.3 update yesterday. Does not work to unlock the phone, or the applications that use it. I have disabled/enabled it. Re-installation of my fingerprints and no luck.  Restarting phone did not help either.

  Not done prior backup of phone to date.  And have not tried to make a backup and restore again.  Has been hoping a solution faster or better (and also wanted to report this problem).

  Any ideas?

  Have you tried a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Ignore the "Slide to power off" text if it rises. You won't lose anything.

• Multifunction HP B110a stops working after update from Hp

  I have the all-in-one HP Photosmart B110a, who stops working after applying "HP updates notification". Impossible to print or access HP Solution Center (nothing works). Only solution is to use the installation CD to completely uninstall the HP software & then reinstall. I always prefer to bring software up-to-date, but never for this B110a.

  Member of the family with the same B110a also had this problem today after inadvertently update, so I fixed as mentioned above.

  A lot of your time. Could someone inform me why this happens & there at - it solution. BTW I stopped (as useful as an ashtray on a motorbike) updates

  Concerning

  Thank you Gemini02, not sure what you mean by "go through the HP software. I can find the IP address in the box at tools of the HP Solution Center/printer normally, but after applying the updates, I am unable to access the HP Center solution so I wouldn't be able to change the settings. In any case, I don't want to apply updates in the future.

  Kind regards

• Audio stopped working after update

  I have a T5010 e-machines running Windows 7 Pro, x 64 with 2 GB of RAM.  The audio has stopped working after a few updates.  Don't know which because he has many people who installed at the same time.

  I tried to uninstall the audio driver then reinstall.  I tried the shooters to boredom.

  In Device Manager the drive is recognized, but the question mark yellow and says that the device does not start and he has (code 10).    When I start the computer, I get a message that does not start the Realtek audio.

  Since I have no more options about what to do to solve the problem can anyone here help me get the sound working again.  Thank you.

  Hello

  Refer to the suggestions of Shinmila H said on December 10, 2009 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-no-sound-high-definition-audio-device/99f19403-c7f3-462e-9ff8-b36f260be979

  You can also check:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/ATI-high-definition-audio-device-has-a-driver/cd913a6c-40Cf-43c8-8073-fb865b4020d7

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Helmet of Q10 Blackberry blackBerry 10A stopped working after update 10.3. Help, please

  Dear friends! I bought a new Blackberry Q10 just a return of the week and it was on 10.2 os and worked very well, he made me a 10.3.1.1779 update which was about 1.5 GB and I opted for it. My headphone stopped working after the successful update. Besides that everything works well and good. I tried another helmet, cord to the and also tried to wipe off security and hard reset, but nothing helped. I am very worried and looking for help. Please guide me what should I do? Either it's a hardware problem or software related? PS each time as I use headphones it detects, by pressing the button answer on phone headset also Assistant bb opens but sound is not dating a helmet! What ahould do? My phone does not come in the warranty.

  Try different helmet "well known." If those who still fail in your device (but work well in another device), then the deduction becomes one of the devices, which of course we cannot do something internet remotely. Since you say that you have no warranty, you are then looking for a local store (to you) with a technician that you trust and ask them to go to a good assessment and estimate.

  Good luck!

• Fingerprint reader has stopped working after update vV1.0.3.49

  I recently downloaded from Toshiba and installed Fingerprint Utility V1.0.3.49 (tc00407400c.exe) and since my fingerprint reader has stopped working.
  The software opens but usually recognizes my fingerprints and can not connect any other way.

  Have uninstalled and reinstalled several times and same result.

  Device Manager says device works ok.

  May I ask what model phone you have and what system do you use?

  Probably, you need to delete stored fingerprints and after restarting again, you should try to register new fingerprints using the software update of fingerprints.

  Have you tried that?

• Safari does not work after update ios 9.3

  Links in Safari stoped to work after upgrading to IOS 9.3. I have restart the system and I re - install the backup in my IPad but doesn´t work. When you click on the link only opens a new page and sometimes freeesing Safari

  I use Safari without any problem after update 9.3.

  Try the following:

  Tap settings > Safari and then tap to clear the history and data from the Web site

  Then restart your iPad and try Safari.

• Access keys stopped working after update Win XP on Portege M200 and M400

  After having invited to do, I recently upgraded to Windows XP two my Portege m400 and m200 notebooks.
  Since then, I've noticed as hotkeys that i.e. Fn + F1 - F12 has stopped working.
  Outside the windows updates, I only use and change a lot on the m200 so I am sure this has to do with the Xp updates.

  Can someone help me restore the m200 and m400 hotkeys?

  Hello

  Try reinstalling the common module for Win XP edition filed.

  The common module for Poretege you can find on the European driver Toshiba page:
  Laptop-> Portege-> Portege M Series-> Portege M400

  The common module for Portege lies in
  * ARCHIVE *-> Portege-> Portege M series-> Portege M200

  Welcome them

• Adapter Ethernet Thunderbolt has stopped working after update 10.11.2.

  Hello, after my update to 10.11.2 on my MacBook Pro retina 15 "mid-2015, my crush Ethernet Adapter has stopped working. It comes in the reporting system and it shows that it connected to ethernet, but in the network Panel, the State remains red and I don't get an IP address.

  My colleague who has a MacBook 2013 15 "retina Pro also has the same problem. We tried the retail adapters Ethernet Thunderbolt, but still no connection on one of our networks.

  Anyone else see this behavior?

  Same problem here on my end 2013. In Recovery Mode, the card works (good trick to know if hardware is broken). Roll back via Time Machine works 10.11.1 and adapter. Adapter and 10.11.2 relocation does not-MBP-R all my colleagues in different years work well after the update.

  BTW. : not only Thunderbolt Ethernet does not work, but the cards virtual Parallels (for shared and host-only) as well (only bridged mode works).

  So far, all the stuff has failed. And now I will notify again before the update.