TouchSmart iq500: update BIOS iq500

Similar Questions

• Advisor TouchSmart IQ500 hp total care work is not for the updates.

  I have a PC of the Touchsmart IQ500, with WIN Vista Home Premium and ie series 8

  When the Advisor to hp total care appears with updates, I click to update, but it is just frozen there. Also help PC Advisor does not not to get critical update update and gives me the red error box when I click run that reads: error occurred while processing message. Thanks for any help.

  Nancy Uzupan

  Thank you...

  Product number is: NC700AA-ABA

• How to find or change the voltage setting set in a series of HP TouchSmart IQ500

  How do I find or change the voltage setting set in a series of HP TouchSmart IQ500 (specifically an IQ524)

  It does not use an external power adapter? If so, all you need to use in another country is an adpater sheet to match the wall outlet.

• TouchSmart IQ500 and Win8?

  Hello.

  

  HP TouchSmart IQ500.

  System #: FK936AA-ABG

  Serial No.: 3CR - B32 (hidden for security)

  Model #: IQ518a

  What is the position of HP on this machine and Win8?

  I have one of these machines running Win8 64-bit, but it often gives problems.

  Problems of video driver with the screen going white (which I learned by reading the other messages, is quite a common problem with Win8 on TouchSmart machines), and recently, problems, where the sound cuts just by itself, and there is nothing you can do to make his work again made hear.  Sometimes if you wait awhile it works again, but the sound can fail just half way through a movie without apparent reason.  There is NO sound alert, weird or anything - he just died and you can't have her again from there.  SOMETIMES reboot solves the problem, but only with about a 75 percent success rate.  It isn't the application to the origin of the problem with the sound - no application that uses sound not coming out-even the his Windows in the Control Panel application.

  Thus, at the end of the day, can someone at HP please confirm me if this model machine is actually compatible with Win8?

  I'm guessing that it's NOT supported at the moment, because I was not able to find drivers specific for this model machine Win8, unless I'm not looking for the right place, and it is quite possible!

  Thanks for any response.

  Graeme1974,

  It is a forum for users of peer-to-peer supported. HP maintain no official presence on this forum. Any response received by an employee is one who is clean and not HPS.

  It is position of HP on Windows 8 and any computer Windows 8 non-HP;

  Not all the features of Windows 8 may be available on all PCs.

  Your specific experience with Windows 8 will be determined by the capabilities of your PC.

  HP provides upgrade instructions and the drivers will be available for the majority of Windows 7 systems sold after October 1, 2011.

  If you want to restore the original operating system after the upgrade, you must create HP recovery before you put on level support.

  Please note that if you purchased your system before October 1, 2011, HP has not tested these PCs or developed the drivers for them or upgrade of Windows 8 instructions. The upgrade of these systems can be difficult, if not impossible.

  Please send Bravo

• Portege A600: cannot update bios 3.0

  My current bios version is 1.6, the latest is the 3.0
  When you try to update the bios, I receive an INSTALL2 APPCRASH. EXE
  exception code c000005

  I tried to start it in safe mode, but that deer does not help

  Thanks for help

  Hello

  The istall.exe should not breaks down and you should not update the BIOS in safe mode!
  Windows should be started and should work properly!

  This is a Toshiba FAQ How update BIOS:
  http://APS2.toshiba-tro.de/KB0/HTD9502M10000R01.htm

  Eventually the error code is related to corrupted windows OS or some tools from Toshiba is missing.
  Using Win XP the common Modules must be installed.
  You are using Vista or Win 7 VAP (value added packaged) must be installed.

• Portege Z830 - update BIOS

  Hello

  I want to update my BIOS from version 1.4 to 1.6 (latest)

  When I try to do it (directly with the updated BIOS or via the TOSHIBA Service Station) I got the following error message:
  Error: Preparation of updated failed
  You have not given permission to run the update.

  I am connected with an administrator account and I already try to run it with "run as Administrator"

  I'm not on the toshiba Windows installation because I have my own license of Windows 7 Professional (64 bit).

  Can you help me?

  Thank you very much

  PS: Sorry for my English, it is not my native language

  Question may be stupid, but why do you want to update the BIOS?
  Have you noticed a few problems with your machine?

• Portege 3410 - how to update BIOS and install XP?

  Hello, I have two questions on Portege 3410.

  First: I can't update the BIOS (current usage, 1.50 there, I want to update to 1.60). Instruction does not work: I connect Teac USB into USB port, turn on the USB - FDD emulation to activate, portable switch with pressed F12, the message «Ready to update BIOS...» "appears, I touch in a hurry, but nothing happened. What's wrong?

  The other: I can't install Windows XP on laptop (it does not start from USB disk or external USB DVD drive).
  How can I install Windows?

  Thank you.
  Mikhail

  Hello

  Just a question: why do you want to update the BIOS? Is this really necessary?
  I ask this question because this update is always somewhat risky and you might damage it ROM module
  In any case, have you tried to load the default settings in the BIOS before you start the update and install XP?

  You can install XP without CD. Therefore, you must copy the folder i386 on the HARD drive from another computer and the boot to the HARD drive files, I think you need a little search with Google to find a workaround for this. You should find enough! ;)

• Don't recharge Tecra S11-119 - updated BIOS question too!

  My computer is a year. It was quite well, until I noticed that he had ceased to charge the battery. After some googling I found that there could be an update of the BIOS, that I had missed. When you try to install the BIOS update, I get a message saying I need to plug in my computer first (which is always that the dough is not a charge).

  BIOS update program says he wants to be updated as follows:

  BIOS version: current Ver.2.60--> updated Ver.3.20
  THIS Version: Current Ver.1.80--> updated Ver.1.90

  OS: Windows 7
  BIOS file I downloaded: bios-20110714132558

  Is this a known problem with a fix available?

  Hello

  Are you sure that you have downloaded and used the good version of the BIOS.
  I have read about similar error message and finally the used user isn't compatible BIOS.

  In addition the VAP (value added package) must be installed to update BIOS! In case you, I recommend you to reinstall this tool too.

  But I'm not quite sure if the BIOS update will help you solve the problem of battery m
  Maybe you need to replace the battery

• Satellite P20 S203: update BIOS after version 1.70

  Hello! I have a Satellite P20 - S203 BIOS is Ver1.70, published on 20/11/2003. I think there pretty outdated now, but there has been no new versions for years and I think that this great computer, despite the old, should be more supported. What I don't understand is why they made an exit for the PSP23E and not for the PSP20E, that make the differences that they should deserve to be updated bios different?

  Does anyone of you know about BIOS versions after 1.70 which allow the laptop to boot from SD cards or removable media? And that the problems of the management of multiple USB devices?
  Thank you

  Hello

  I use P20 over two years, without any update of the BIOS. If your device works well I recommend you to leave. Boot from the SD card is not possible and update the BIOS will not allow this.

  What problem do you have with the USB devices?

• HP Pavilion 500 series: updates Bios

  HI I was wondering tonight in my hp support center was a significant update of the Bios I was wondering if I could please get some advice on the question of whether it is a good idea to Bios if there is nothing wrong with the Bios in the first place.  Why should I update the Bios or should I not update the Bios for my hp Desktop.

  Thank you for your time and help

  In general, I agree with redshore.  I'm used to be of the opinion that if everything worked as planned, then leave it alone.  Since I use a HP ENVY laptop with Windows 8.1 one year, I noticed that the HP helper has done several updates that I probably have on my own, especially updates BIOS.  I don't know why there would be many updates to BIOS, so have to asuume engineers tried to fix a problem that had been reported.  As redshore, you always stand the risk of bricking the unit with BIOS update is bad and if you read the forums here, there seems to be more those happening.

  Some units now have a feature where a regime of BIOS recorvery is integrated, a good idea.  You might wise to explore your PC to see if the model you have this feature for a while where you might need.

• Question about updating BIOS for my Satellite M40

  So, my laptop does not start, but works recovery procedure. Support suggested me to update my Bios.
  OK, given that the last time, it was easy.

  I downloaded the newsest version vor my Satellite M40 (PSM40) (1, 70 - WIN<= i="" have="" an="" ati="" grafics="" card)="" and="" extracted="" the="" bios-20070709161345.zip="">
  But there was a surprise:
  Instead of getting the old data structure, as written in the FAQ update Bios
  1 extract the zip file containing the BIOS upgrade to a temporary folder.
  2. in the folder temporary three subfolders will be generated. "docs", 'Update - 3.5' disc', 'Update - CD - R or CD - RW"

  I get a file only: BIOS of Windows Knockhill10GV170.exe
  Extraction of it I get 8 files:
  -fdbase.img
  -InsydeFlash.exe
  -iscflash.dll
  -iscflash.vxd
  -KPM170. ROM
  -Platform.ini
  -The c:\windows\system32\unicows.dll

  Now my question: How can I create this bootable CD-ROM to update my Bios?

  Just to know: download all the other things are done on my desktop from my laptop is not starting ;)
  I also tried to run the exe in the hope that it will create a floppy disk or a CD-ROM, but it is written "basic cfg address not found."

  Hello

  Update the BIOS there are two ways to do this:
  -Traditional mode (TRAD) and in this case, you need floppy
  -Windows (WIN) and this update can be done under operating system running.

  Update BIOS WIN will work if you run Windows on your laptop satellite. If I understand your assignment well you are trying to do traditional BIOS updated, but using the BIOS to WIN update. On the Toshiba download page, there are two listed BIOS updates and two of them as versions of WIN. This means that you can update the BIOS under operating system only.

  Back to your problem: in the history one thing confuses me when you write: my laptop does not start, but works recovery procedure. Sorry, but if the recovery procedure is working and you will have clean installed OS.

  Be a little more concrete in our laptop does not start. What happen exactly when you press the power button / stop?

• Satellite T135 - update BIOS 2.70 won't be finished

  I have a Satellite T135 Win7 running with an original BIOS that I'm moving to 2.70. I ran all the other software updates in Service Station (2.1.51) with no problems. but the BIOS downloads 2.7, initiates and cautions that I'll need to reboot (I select Yes to execute) and receive notice of popup on the electrical problem (defective DC) which corrects this BIOS, then nothing. It just stops.

  I disabled my firewall windows antivirus, but the update is still unable to fill. I downloaded the file directly from Toshiba (outside the Service Station) and run the file and exactly the same thing happens.
  The event viewer shows all the related entries.

  Anyone has an idea on how to get the updated BIOS up-to-date?

  Hi mwarwick,

  Did you install any new version of package of added value of the Web from Toshiba site? This program is necessary if you want to update the BIOS to check if you have installed the latest version.

  In addition I recommend you load the default settings in the BIOS before doing the update. Then, go into the BIOS, press F9 to load the default values, save & exit it.

  Can update you the BIOS now?

• Update BIOS Z830 satellite

  Hi, everyone tried to upgrade the BIOS Z830.
  After I rebooted, I get a message to insert an original disc of Windows, but Z830 has no optical drive and more I don't have a Windows disk, since that it is pre-installed?

  I went back to the store and they plugged the USB optical drive with an OEM of Windows version and I entered my ultrabook, but a day later I got the same message to insert an original disc of Windows after a re-boot without me even trying to upgrade the BIOS, it seems that the upgrade of the BIOS did not the first time!

  Why update BIOS asking for an original Windows disc? Any thoughts? Thaks!

  Hello

  Please try this:
  Switch on and press F2.
  This should allow you to access the BIOS.
  Press F9 BIOS this will outline the BIOS default settings. Press F10 to save the changes.
  Now start the machine.

  If you will not be able to start Windows. Try this:
  Turn on the computer and press F8.
  Now you should see a menu of advanced boot.
  Here choose fix my computer-> drive HARD recovery.

  HARD drive recovery will start the recovery procedure, without the use of all disks.
  This will help you define the laptop back to factory settings.

  Hope this can help you.

• Update BIOS Satellite 1730

  I want to update BIOS and who have already downloaded and the file dezipped. This file that I copied to a floppy disk. In the description they say I have to restart the computer and press a certain key (F12 or the left of the space bar). But it did not work. Does anyone know how to do this?

  Guenter.

  Hello

  on this model you do not need to press F12 or another key. Just unzip the packege BIOS on a blank floppy disk, reboot the machine and make sure it boots from the floppy disk. The upgrade of the BIOS will be done automatically.
  Make sure that you have the power adapter plugged!

  Tom BR

• Satellite Pro M30 - error message: the user is not authorized to update BIOS

  Hello

  I bought a Satellite Pro M30 of second hand. This one has the Bios 1.30... I would like to install the bios v1.70.

  I am running Windows XP Pro SP3 and tried first update in Windows.
  I however got the message "the user is not allowed to update BIOS.

  This message is quite surprising given that I have administrator privileges.

  I read that you can use a floppy disk to update, but I did not...

  So, is it possible to update the Bios with the CD?

  See you soon,.
  R.S.

  Hello

  I checked the page European driver of Toshiba and found the version of BIOS 1.7 WIN in the field of ARCHIVES.

  As you can see, it's a version of BIOS Windows and not a traditional version of the BIOS (trad BIOS can be updated using the diskette).
  This BIOS win can be improved only from a running OS Win.

  In any case, I see that you have installed SP3. It could have a bad influence on the update of the BIOS.
  Then maybe you should try to update the BIOS without SP3 installed?

  Remove SP3, download the good BIOS, unzip correctly and then try to run the BIOS update file.

  _Ps: If you laptop then runs without problem a BIOS update is not necessary! _

  Concerning