TouchSmart tx2 notebook, does not start.

Similar Questions

• Satellite A665 - battery not charge/notebook does not start.

  I have a problem with my new A665 Satellite.
  My battery won't charge and my computer does not start if the battery is in place. whitout the battery (with a/c) the computer works fine.
  Please help as I just bought it and without a pile of work a laptop missing its goal.

  Thank you
  Wimv

  > new Satellite...
  New? Don t waste your time trying to fix something on yourself. It is produced and it should work properly.

  Contact the nearest Toshiba service provider and ask for help. They should pay attention to this topic. For free, of course.

• Acer Aspire 5742Z Notebook does not start

  I am running Wndows 7. When you press the button "power on", that the power light turns on, the fan starts, the DVD player made his usual noise and then after 3 seconds, all this stops and all the lights go out. The system restarts immediately, and the process is repeated - over and over again. He just constantly loop. There is nothing showing on the screen at any time.

  I checked the RAM and HARD drive and they seem to be OK. I removed the DVD player and tried different combinations of race on foot with and without lead power and battery connected. All to nothing does not. I can't access the BIOS even by using the Fn + Esc key combination.

  I'm now leaning to believe I have a probem m/Board.

  If anyone has a solution I'd love to hear it!

  Shrappers,

  Looks like you are on the right track and did all the correct steps for the issue. I agree that the problem is hardware related. All devices seem to be powered, but the loop could be linked to the motherboard.

  If you are looking for repair, please contact technical support in your region. If you want to repair yourself you can always contact one of our partners in parts for a motherboard.

• Example; G56-122US Notebook: My HP. notebook does not start.

  Dear Sir.

  When I press the power button on my lap top lights key f12 with color red and capital lock key blinks. The screen is dark. Please notify.

  Kind regards

  Rajdassi

  my HP Note book. has stopped working. When I press the Start button to launch capital lock flashes and the screen is blank.

• My Presario CQ61 NoteBook does not start. It shows a white screen.

  Hi, I'm back. This time, my laptop displays a white screen when I turn on. In addition, Caplock and Numlock indicators blink for 3 times and then the system powers off by itself and turn on again with a regular flashing, almost to infinity. I need a help. What could be the cause and what is the solution? Thank you.

  Hello

  If you have several modules of memory installed, try the following.

  In regards to the link below, delete one of your modules of memory and then see if the laptop will start.  If it doesn't, try the same module, but in another location.  If it is still won't start, try the other memory module in both slots, to see if any combination will allow the laptop to start.

  The procedure for withdrawal of these modules is detailed from Page 56 of your & Maintenance Guide.

  Kind regards

  DP - K

• my HP Touchsmart tx2 screen does not work.

  TX2 comes on but no screen image.  Small lights adjacent to and buttons flashing.  Have Windows 7.  I tried external monitor and fn f4 doesn't solve the problem.  What seems to be the problem?

  Hello

  Please visit this link.

• Does not start satellite C50-A-1E2

  Hello
  When press the power button / the notebook does not start. The screen is black, the fan is running and waving up and down. After 10 to 30 minute wait to start the laptop is well until next time. The laptop is not old, bought about 15 months ago. Nothing has changed, no BIOS changed also. The only change is Windows 10. Any ideas?

  Remove the battery and try to start with the power supply only.

• Touchsmarrt Tx2 turns on but does not start.

  The laptop turns on I hear the fan, the caps lock and a lock of numbers blink, but it does not start. I'm runnin windows 7

  Home premium. I did recent changes. Just put computer in mode 'sleep' and he won't wake up. The wireless light is orange.

  Electrical components sometimes must have all the food sources removed and reintroduced to work properly.  Try to perform a hard reset first, if this does not work then we will move on to the next step.

  To perform a hard reset

  • Shut down the computer by going to the menu start and select shut down. (If you have no display, hold the button for 5 seconds); (if the computer don't market, go to the next step)
  • Unplug the adapter from the laptop.
  • Remove the battery from the bottom of the laptop.  There will be a switch/battery eject button.
  • Wait at least 1 minute with all sources of power disconnected.
  • Reinsert the battery and reconnect the power adapter, and then try to turn on the laptop.

• HP 6535 notebook computer b with Windows 7 does not start

  I got a laptop HP 6535 b for two and a half years now and udgraded to windows 7 in December. Its working well since then, this afternoon. I had put into hibernation earlier in the day and when I tried to restart, the screen remains blank and it does not start. The Wireless does not, and the drive hard and capslock/numberlock lights blinking on and outside. I tried hard cock shooting down by holding the power button and removing the battery and the ac, but it still won't start. I haven't changed anything recently, and he was perfectly fine until this afternoon. What can I do?

  Hello

  I do not work for HP and you are right that the price of motherboards varies considerably between models.  I would suggest contacting HP directly using the links below and see if they can give you an estimate of the cost.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• HP Envy 15: HP ENVY does not start!

  Laptop crashed with page error and blue screen. Now does not start. Followed advice to reset by removing the battery etc etc, but when I power on I just get the wifi switched on continuously (orange) button and the lock button flashing.  Nothing else happens - just a black screen. Why not work to hard reset and what do I do now?

  Hello! Okay, I want you to download this update of the BIOS and then follow this Document on how to solve this problem

  http://ftp.HP.com/pub/SoftPaq/sp66501-67000/sp66941.exe

  http://support.HP.com/us-en/product/HP-envy-TouchSmart-15-J100-notebook-PC-series/5401191/model/7399045/document/c02693833

  Go to the Section retrieve the BIOS of the laptop using an external storage device

  Now when done restart the PC and Boot to the Flash disk by pressing

  Windows key + B

  Good luck!

  Looks: 1029rjmenvy17t

  Please "KUDO" if you like for thumbs to the top and "Accept as Solution" if this fixed your problem

  To help others find it and helps solve them the same or similar problems

• Satellite L40-139 does not start

  ? 19/02/2014 18:41 - edited? 19/02/2014-18:45

  Hello, I have a problem with the SATELLITE L40-139

  the thing is when I press the power button / stop, hard drive led will begin to Flash, CD-ROM led is lit and the screen is black. I noticed that advise in the CD-ROM makes a sound ICT in the same way the hdd led flashes (when it flashes I hear a tick form CD, yes I unfolded any computer laptop).

  I can only say that I have connected my PC HARD drive and it's working., good fan is not working too, but I think it will start, after some time (as he always did)

  Notebook crash circumstances are now saying: that a year ago, he fell from 1 inch (such height ;]) I saw that the ribbon cable connecting the touchpad to the mohterboard was broken and my diidn can't start computer, I thought that there's a problem, but I forgot and left the laptop for more than 9 months (with hard disassebled and battery and cd-rom drive) and then I decided to try to turn it on.
  And viola! It works it boots etc.

  After a month of being happy, I'm drunk I couldn't sit on the Chair and I decided to sleep with my laptop on the bed, I lied right down and put the laptop on my belly and it crashed (screen freezes) so I decided to reboot, but it does not start.

  Here is a video with what I get when turning the power on it: [http://www.youtube.com/watch?v=jC0pGBBVwJk] (not Fortunately my phone fell in the mud and shifts when I record videos)

  Some people suggest I should connect an external display to see if theres no picture but the result is always the same. (Screen not even fuels not on)

  Maybe someone could help me fix without sending it to the customer service.

  See you soon.

  On this virtual path, it is not easy to say what the problem is here. Of course, you can try to do some tests and try to make some conclusions which may be wrong. After his last stop somewhere I think that there is big problem with graphics card. Of course I can't say it for sure.

  Diagnosis just exact mainboard can offer answers. I m afraid mainboard is dead and must be exchanged.

• Portege Z30T-a does not start

  Hello, can be here can someone help me.

  After of unknown causes, perhaps after it was switchable to hot RAM or another, all of a sudden my laptop does not start Z30T-A. How to say, after the press, there is 1 or 2 second screen sound and black fan and autoreboot. After the reboot, I see bright screen with its strong constant cooler and no action in the future.

  I try to start without battery, only with adapter ac - same situation... without ram or ssd - same situation... i ' l reconnect adapter wifi, keypad and all hardware components - same situation - no start.

  After that, I'll give this notebook to my friend, who work in the center of laptop repair.
  After a few tries, he said, which can be a problem with the bios (bios can be deleted all of one or another error, which cannot provide no boot), or perhaps by this problem with CPU.

  I chose the update of the bios, because it's the cheapest option. My friend can desolder the bios chip and via special equipment download a new.

  But we don't have bios for Z30T-A.
  He said that all versions in part support on toshiba sites are inappropriate.

  It's ok if you refresh or download it via capable of mobile work. I try to get e-mail support for toshiba BIOS, but they only have version bin and my friend say that he needs another, not bin... of course, we can buy motherboard on ebay (in our country, it's no support computers laptop toshiba) but it's expensive.

  Also, my friend told me, he can download it via the bios from another laptop same special equipment, but we do not have it.
  Maybe somebodey here can help me.

  To be honest, I can't imagine how an EPROM of the BIOS could be deleted without performing such procedure previously.
  That's why I put t think that this laptop is problem BIOS
  Your friend could be the problem but anyway

  However, you are looking for the BIOS?
  All BIOS versions can be downloaded from the Toshiba U.S. page:
  http://support.Toshiba.com/support/d...ext=1200008173

  The WinRAR ZIP file includes both Windows and disk based according to the BIOS update installation options.
  You should see the documentation included for more details.

  

  Here is the link for a direct
  BIOS version 4.00 for Portege Z3x (PT241x/PT243x/PT24Ax/PT24Cx/PT24Ex)
  http://cdgenp01.CSD.Toshiba.com/CONT...s/t241v400.exe

• Satellite A200-08JC - software of the camera Chicony does not start

  I installed the correct drivers for my 08JC satellite A200 XP, but when I click the button start to run the software, it shows something loading for a few seconds, then stops. The camera does not illuminate and the display software that shows the view of the camera does not start: nothing happens.

  I searched around on Google for a solution, but other users having similar problems to the least get an error message to help. I have nothing like that.

  Does anyone have ideas that could help?

  And what dodey now?
  Driver installation doesn t help, you don't want to test the functionality of device with the settings you would expect now?
  A magical solution or what?

  Description of your model name is somewhat strange and A200-08JC is not known to me but overall Satellite A200 notebooks are WXP supported.
  Can you please post the model name for laptop again?

• Satellite M30-107 does not start successfully after using recovery disk

  Hello

  I recently got my hands on a toshiba Satellite M30-107 laptop second hand and decided to freshen it.
  I used the toshiba recovery disk, but after that the laptop is no longer support windows.

  When turned on it shows booting Toshiba disc for about a second then goes to a screen blank and freezes.
  When turned on, once again, a screen will appear an error by stopping and offer the opportunity to start in SafeMode etc but choose one of the options causes the machine to freeze.

  Any help or advice would be much appreciated.

  Thank you
  JT

  Hello

  Sounds a little like the laptop does not start because of the problem of Windows software
  You did not recover the M30 with the original Toshiba that was provided with this device M30 recovery CD?

  I may be wrong, but to me it looks like a recovery CD incorrect has been used and an image with drivers not compatible m has been installed

  You can try to install the OS of Microsoft Win XP original CD and could check if it would be possible to get the notebook ruin using own BONE.

  In this case we (you and me ;)) might know if this problem could be related to hardware or software.

  Good bye

• Qosmio F750-03W - face recognition does not start and the video freezes

  I apologize for my English.

  NVIDIA 3D test shots of program wheel. Face recognition does not start.
  If the activator of the image that 3D is disturbed and I do not see the image in 3D.

  If I try the Games 3D compatible (Left4Dead) active 3D 1080 p, but the game is choppy as the test 3D image not turn on face recognition.
  3D game is to see the 2D to 3D pictures, but how do I vadere photos in 3D?

  If the Activator active 3D image quality is mediocre.
  I have defined normal and advanced, but videos have gost especially on side effects.

  Hello

  It looks like your Qosmio F750-03W PQF75C 03W001 is a Canadian model of Toshiba that I found it here:
  http://support.Toshiba.ca/support/ISG/Center/en/index.asp?S1=notebook&S2=Qosmio&S3=F750&S4=PQF75C-03W001

  First you need to update the BIOS with the latest version (at this time, it seems that BIOS 2.0 is the most recent).
  Also update the
  nVidia Display Driver version 8.17.12.9039
  Super-D IC Driver version 1.0.1613.809
  Toshiba Blu - ray Disc Player version 1.0.1.299
  as mentioned here http://support.toshiba.ca/support/isg/tsb/en/view.asp?docid=TSB001633

  If stereo 3D effects are not well use X-tune to calibrate it.
  It is recommended to use this utility to optimize the 3D stereo effects when you use the 3D without glasses for the first time or to be dissatisfied by the 3D effects.

  To use the X-Tune utility, follow the steps below:
  1. Select the language mode and optimization, and then click OK. There are three optimization modes: primary, advanced and professional. You can choose according to your own experience.
  2 sitting about 60 cm from your computer, click Start to continue.
  3. follow the onscreen instructions on each step.
  4. use the left or right side of the keyboard arrow key to adjust the effect. When you are satisfied with the effect, click on enter and then an information window appears on the screen. Press the keyboard ESC key to cancel the optimization procedure.
  5. click on Finish to close the X-Tune utility.

  You said that your face recognition does not work correctly so uninstall this software. This also with the software/driver for webcam. Once these two tools has been uninstalled, clean the registry with CCleaner and install these two tools using the most recent version.
  Restart and start X-Tune to calibrate the 3D effects.

  In the doc of Toshiba (link above), you can find this notice:

  1. the value [screen resolution] 1920 x 1080. Glasses free 3D mode is not activated except in mode 1920 x 1080.

  2. depending on the game, it does not work with glasses free 3D mode and with the 2D mode.

  3. depending on the game, it display correctly with stereoscopic 3D mode

  4. the game does not appear with glasses free 3D mode when you run drive Blu - ray TOSHIBA with glasses free 3D mode
  or run TOSHIBA Web Camera application.

  5. the performance of the game will be reduced when the game with glasses free 3D mode. If the game performance is considerably diminished, please reduce the quality of the image of the game by using parameters
  of the game. If the performance of the game are still not sufficient, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  6. small fonts in games can be difficult to read with the glasses free 3D mode. At this time, please press the PC 3D and temporarily disable glasses free 3D mode. Glasses free 3D mode is enabled if you again press the 3D button

  7. the response of the game may delay with glasses free 3D mode. If you feel it and can not enjoy the game, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  8 glasses free 3D mode can be disabled temporarily by pressing the PC 3D button, but it can be activated by playing game. At this time, please press the 3D button and turn it off again.

  9. when [enable stereoscopic 3D] in NVIDIA Control Panel is not checked, the game will start with 2D mode. At that time, glasses free 3D mode is not enabled even if you press the button during the game PC 3D.

  10 glasses free 3D mode may be turned on except TOSHIBA Blu - ray player and games. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  11. the color of the video may be different from the original during video playback with full screen on RGB and not 3D TV if [enable stereoscopic 3D] is checked. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  I hope this helps.