Similar Questions

• App - test available, you can keep track of the health

  Is there anyway to add a new test that you want to keep track of the application?  Some test results important for certain medical contains are not available, and I want to add and then on my dashboard.

  Thanks for the help!

  No, not for the moment.

  Comment asking this feature here:

  http://www.Apple.com/feedback

• tapping on a track from the album will play only one continually

  Tapping on a track of the album reads that a continally

  You have certainly repeat turns. From the Manual:

  Play music

  Control playback. Tap a song to play and show the Miniplayer. Tap the Miniplayer to display the now playing screen, where you can do the following:

  • Press on to move to the next song.
  • Press on to return at the beginning of the song.
  • Double click to play the previous song in an album or a playlist.

  

  Skip to any point in a song. Drag the playback slider. Decrease the speed of friction by sliding your finger to the bottom of the screen.

  Share music. Press on , then choose a sharing option.

  Shuffle. Press on to play your songs in a random order.

  Repeat. Press on to repeat an album or a playlist. Double click to repeat one piece.

  More. Press on for additional options.

  If still problem:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  Unsync/delete all the music and Resync

  To remove all music go to settings > general > use > storage > storage management > music > tap Edit in the top-right, then press the sign less than all music

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

• I've recently upgraded to El Capitan - biggest problem is timing removed all the entries in my previous ical. Any ideas how I can track down the file containing these essential documents and install in the new program?

  I've recently upgraded to El Capitan - biggest problem is timing removed all the entries in my previous ical. Any ideas how I can track down the file containing these essential documents and install in the new program?

  All calendars are enabled in the sidebar?

• How to make the button to set the properties of auto-scale one of the Axes on the graphical indicator so I can turn on or off when I press on it. In the Labview web UI designer

  How to make the button to set the properties of auto-scale one of the Axes on the graphical indicator so I can turn on or off when I press on it.

  I need to change the adjustment vaguely Autoscale property for my graphic indicator. Can someone help me please.

  Thank you!

  Hello

  I have confirmed that there is currently no way programmatically enable/disable autoscaling for axes on the LabVIEW graphical indicator generator of the user Web interface. We noted this to possibly be implemented in the future; Sorry for the inconvenience.

• The USRP CSD requires the LabVIEW Communications?

  I recently installed LabVIEW 2013 on my machine, as well as a whole bunch of toolboxes:

  LabVIEW English 2013
  VI Package Manager
  Module LabVIEW Control Design and Simulation 2013
  2013 LabVIEW Datalogging and Supervisory Control Module
  2013 LabVIEW MathScript RT Module
  NI LabVIEW 2013 LEGO (R) MINDSTORMS (R) NXT Module (in English)
  Module OR Vision Development 2013
  Module LabVIEW FPGA of 2013 (English)
  Xilinx toolchain 14.4
  Module time real LabVIEW 2013 (English)
  2013 LabVIEW Touch Panel module
  2013 LabVIEW Robotics module
  Software OR SignalExpress 2013
  LabVIEW Sound and Vibration Measurement Suite 2013
  Module LabVIEW Statechart of the 2013
  LabVIEW 2013 for myRIO Module
  Toolkit OR run real time Trace 2013
  2013 LabVIEW System Identification Toolkit
  LabVIEW Toolkit 2013 Digital Filter Design
  4.3.4 for LabVIEW Modulation Toolkit
  2013 LabVIEW VI Analyzer Toolkit
  2013 LabVIEW Database Connectivity Toolkit
  2013 LabVIEW Report Generation Toolkit for Microsoft Office
  LabVIEW Spectral Measurements Toolkit 2.6.4
  2013 LabVIEW Advanced signal processing Toolkit
  LabVIEW 2013 PID and Fuzzy Logic Toolkit
  Kit filter LabVIEW Adaptive, 2013
  Toolkit LabVIEW DataFinder of the 2013
  2013 LabVIEW Desktop Execution Trace Toolkit
  LabVIEW 2013 Multicore analysis and matrices hollow Toolkit
  LabVIEW 2013 power electric Suite
  Toolkit LabVIEW 2013 GPU analysis
  Biomedical Toolkit LabVIEW 2013
  Module LabVIEW 2013 OR SoftMotion
  NEITHER Motion Assistant 2013
  NEITHER Vision Builder for Automated Inspection 2012 SP1
  OR DIAdem Professional 2012 SP1 (English)
  LabWindows/CVI 2013 development system
  Module time real LabWindows/CVI 2013
  LabWindows/CVI Spectral Measurements Toolkit 2.6.4
  Spectral measures of LabWindows/CVI DURATION 2.6.4
  LabWindows/CVI SQL Toolkit 2.2
  Toolkit for processing Signal of LabWindows/CVI 7.0.2
  LabWindows/CVI PID Control Toolkit 2.1
  Execution of LabWindows/CVI Profiler 1.0
  Measurement Studio Enterprise Edition for Visual Studio 2012 2013
  General safety NI Patch 2nd quarter of 2013
  NEITHER TestStand 2013
  NEITHER ELVISmx 4.5
  NOR-DAQmx 9.7.5
  Xilinx 10.1 Compilation tools (requires the build tools additional Xilinx DVD)
  Device drivers or - February 2013

  I tried to follow this tutorial with the USRP 2932, coming soon, but I found out later that I have seem to have none of the LabVIEW Communications. No not those who prevent me from using the USRP radio? If not, then is there any restrictions on what I can do with the radio without communication?

  Hi BreadLB,

  The link to the tutorial you posted is based on LabVIEW Communications System Design Suite, a new software environment designed to accelerate the prototyping of the algorithm and stable air.  It is a completely separate and independent of LabVIEW environment.  See my post here for more details.  You can also download a free 30 day trial copy here.  Your hardware is supported with LabVIEW and LabVIEW Communications.

  The 2932 NOR is a network based USRP, and there a small on-board FPGA.  For this reason, the FPGA on that specific product is not a target of LabVIEW FPGA.  The NI 294 x / 5 x family has a large Kintex 7 FPGA and can be programmed using LabVIEW FPGA and LabVIEW Communications, as in the tutorial you posted.  The 2932 OR can be used with your host PC and LabVIEW for a variety of applications.  Unfortunately the tutorial that you have linked to your post requires the NI 294 x / 5 x hardware and Communications of LabVIEW.  If you have questions about a specific application for your 2932, please post more details and we would be happy to help you.

• Freescale in the LabVIEW ARM controller?

  Hi all

  Is it possible to use the freescale MC9S12XEP100RMV controller in the ARMS of LabVIEW?

  Thanks and greetings

  Ben aljia P

  Hi Suren,

  The LabVIEW Embedded Module for ARM Microcontrollers using the "Keil uVision development toolchain to compile, download and debug applications", as this article explains.  (Taken peripheral ARM supported by LabVIEW)

  With this in mind, you should be able to use any microcontroller that supports the "RL-ARM real-time library."  Keil device database lists microcontrollers currently supported with this library.  (RL-ARM real-time library)

  The Freescale MC9S12XEP100RMV MCU is not listed as being supported.  Knowing this, you will not be able to use the LabVIEW Embedded Module for ARM, but you can use the LabVIEW Microprocessor SDK of Module.  The only difference is that the ARM Module has been built on the Module SDK.  The Module SDK is more "generic" and allows to develop support for virtually any 32-bit microcontroller software.

  I hope this helps.

  Kevin S.

  Technical sales engineer

  National Instruments

• Change the language of the LabView controls?

  I just need confirmation. If LabView controls, as a graph, have a context menu, then this menu will be first in the language of the LabView IDE, it is used with. If I create a new application, then the manufacturer includes the LabView RTE. It will also be the same language as the IDE version.

  Now, if I wanted to change the language of the context menu we will say to the french, it would be sufficient for the user has just installed a version in french of the RTE? Is this correct?

  AJMAL says:
  This will be useful?

  Yes, thanks. Another regional setting of RTE would replace the one we provide in our Installer and then the user would have the menu in its language. Very well!

• 2013 LabVIEW allows the user to return to the LabVIEW 2012 or 2011?

  Hi all

  I have LabVIEW 2013. I noticed that in LabVIEW measurement and Automation Explorer (MAX) under the LabVIEW Run-Time 2012 SP1 f2 software is listed. This somehow means I can return or switch between LabVIEW 2013 and 2012 without having to install/reinstall?

  The reason why I ask, is that I have several instrument drivers written for LabVIEW 2012 sp1 I want to use.

  This is probably a silly question, I know.

  On a related note, is it possible to tell if a driver written for an older version of LabVIEW will work in a new version of LabVIEW? Or you just have to play with the software?

  Thank you

  Oh, John

  Hi John,.

  More explicitly answer your main question - you can install multiple versions of LabVIEW in parallel (at the same time, on the same PC), however that one version of patch of each major version (for example, 2011, 2012, 2013) can be installed - you can not install 2012 and 2012 SP1 at the same time.

  The runtime that you noticed has probably been installed with another component that was built in this environment.

  As Dennis said, the big thing to keep in mind is that your screws will have to be upconvertis/resized when moving between versions.

  If your instrument driver is written in 2012 LabVIEW using the serial at low altitude of LabVIEW drivers, it will certainly work in 2013.  If you open the screw driver in 2013 and that you do not see workload issues, you should be good to go.  If pilots request DLL or another have external dependencies can be involved more work.

  Kind regards

• LabVIEW FPGA: An internal software error in the LabVIEW FPGA Module has Unknown

  Sir/Madam,

  Note Labview 2012 SP1 installed about 2 weeks ago.,.

  Accident occurred during the compilation of an fpga vi who worked satisfactorally in the past.

  When I restarted and went to the message recomplile "LabVIEW FPGA: an internal software error in the LabVIEW FPGA Module" see attached picture of popup.

  I reinstalled Labview in its entirety and backed out the changes I made to the vi but still get the same message.

  Thanks in advance

  Daryl

  It turns out that the question was in the VI and not of LabView FPGA module as the message may indicate. I created a vacuum vi, cut and pasted items in this from the vi error and recompiled and it ran very well.

  Somehow the vi has been corrupted internally.

  Thank you it's fixed.

• Any camera regardless of the interface is available for use with the LabView interface.

  Hello

  I intend to go for some CMOS camera,

  but I have a huge doubt before buying, the camera of menttioned above is not anywhere in this list. Nor can I see any type being supported USB device.

  The question is

  1. is a camera regardless of the interface is available for use with the LabView interface?
  2. Can I build a VI to communicate with any device image and recording of camera and take the data?

  Any kind of help or advice is greatly appreciated... I have to buy a CMOS camera and begin to run.

  Thank you...

  Hello Virginia,.

  I am pleased that this information has been useful, one thing I wanted to mention is that USB 3.0 has its own standard USB 3.0 Vision which is currently not supported. If this camera is also Direct Show compatible then you will be able to acquire an image using IMAQdx and manipulate all the attributes that are published to the API Live Show.

  I hope that USB 3.0 Vision will be supported in the near future, and we tentatively announced for this standard of communication for the August 2013 Vision Acquisition Softwareupdate.

  See you soon,.

  -Joel

• Install the LabVIEW DSP Module on Labview 2009 Professional

  I have LabVIEW 2009 professional and I try to install the LabVIEW DSP Module on it. I have LabVIEW DSP Module 8.6, and I think that this is the final version. However, when I tried to install it, it says you should have LabVIEW 8.6 on your system.

  What should I do?

  Hello Brandon,.

  I did run the LabVIEW 8.6 DSP module, you must have LabVIEW 8.6 (compatibility table), which can be installed and run in parallel with LabVIEW 2009. I apologize for the inconvenience, but 8.6 is the latest version of this module, so you'll need to buy LabVIEW 8.6 for use.

  Kind regards

  Deborah Y.

• A query on the LabVIEW runtime engine.

  Can I access front of LabVIEW through Internet Explorer even if I do not have LabVIEW installed in my computer?

  The LabVIEW runtime engine works in this situation without the help of LabVIEW software?

  > Can I access front of LabVIEW through Internet Explorer, even if I do not have LabVIEW installed in my computer?

  Yes

  Server must have the labview, labview Web Server runtime and should be run remotely front panels.

  > LabVIEW runtime engine works in this situation without the help of LabVIEW software?

  Does not understand the question.

  Engine run LabVIEW is a LabVIEW software, which is required to run files executable labview. In the case of remote façade panels screws (exe) running on the server that has the run-time engine. Page Web you are viewing in the browser (client) gives you a picture and monitors where you click on it. It passes those clicks to the server, it changes picture accordingly (going on those clicks for labview, gets the update of this photo). Customer does not screw, so should not be the runtime of LV.

• Can I run two separate versions of the LabVIEW Run - Time Engine on a PC?

  Hello, I am curious to know if anyone knew if it is possible to install and use the two separate versions of the LabVIEW Run-Time Engine on a PC?  I have currently 2009 runtime engine installed on a machine, and I wanted to install the runtime for 2011 as well. I know that you can run two separate versions of the LabVIEW program on the same machine, but what about the Run-Time Engine?

  Thank you!

  No problem at all. I currently have the engines of execution for 8.2, 8.6, 2009, 2010 and 2011 on my computer. Multiples are no problem at all. Go ahead and load.

  Rob

• Thr type hbitmap in the labview

  Hello

  I had a Dll located in the internet.

  Now, I want to use "Call library function node" to get the data of this DLL.

  Unfortunately, I don't, t know how to set the "HBITMAP" without knowing the type of law in labview.

  the code of the DLL: extern "C" __declspec (dllimport) bool __stdcall DataMatrixDecodeBitmap (HBITMAP hImage, char * pResult, int * pSize, int nTimeOut);

  

  Is any body knows the right type of HBITMAP in the labview? Table? or labview can, t take charge kind of guy.

  Any suggestions would be much appreciated.

  Thank you

  Hello

  try looking in the header, what is this type of data. It can be a custom structure defined in this file. If so, thread a cluster with the same elements that are in the structure.

  EDIT: found on google

  --------------

  Although Windows handles are under 32-bit Windows for most of the pointers to memory
  It would be a bad idea to try to directly access these data. Windows handles are
  supposed to be types of opaque data whose internal structure is only known for Windows
  and more specific to Windows versions that are similar or better than the one that created it.

  The Windows API gives you (almost) all the specific access features
  information inside a handful. HBITMAP would need to access the API
  function GetDIBits(). This function works with a HDC device context handle you
  probably need to get your capture card interface. This is necessary to convert
  device-dependent in a HBITMAP independent unit information
  (the GetDIBits DI) information in the settings that you want to receive.

  -----------------

  So, here's an I32 or I64, depending on your system. It is a pointer to a memory space.

  And here is a previous discussion: Forum OR