Track pad issues on a V5 8.1 windows

Similar Questions

• Track Pad problem end 2008 Mackbook Pro

  Hi all

  I was wondering if someone could help me,

  I have a mackbook 2008 end pro works great, however I have a problem with my track pad, which is a gift from my head in. IM using my mac now fine no problem however when I stop and start it upward a day later the touchpad is not responding. What I do is taken to the back of the case where the battery is and remove the 8 screws, I see that the ribbon cable is constantly of the touchpad, so I need to keep undoing the screws and re connect which is a pain. My question is how I g to get one of these and are they easy to set up. How do I know that this will not happen?

  Of which detaches, attached photos I reconnect

  I hope someone could help me on this issue as its been done for centuries and is such a pain.

  

  Thank you is all

  To replace this cable, you must replace the trackpad itself.

  This can be a painful process because you almost remove all to remove the trackpad. I guess that there is a way to fix the cable, so it's not unplugged.

  I use ifixit.com all the time to fix a MacBook Air at my school.

  Here is the link to replace your MacBook Pro trackpad. And also to buy the Trackpad.

  It is currently out of stock, but you can warn you when it comes.

  Good luck

• Satellite P500-12F will not load the drivers of track pad!

  Hi, I just got a DVD driver for this lappy and is a self intall of all drivers that are missing or that need to update, when ran I was told of the Skate track had disappeared, and started to load, but it will not I tried a load of strength in vain Hat too, the track pad did not work since getting this second hand could the block be disconnected from the motherboard?
  This would make the driver not loading please?

  Any help would be really appreciated.
  Thank you, Wayne...

  Hello Wayne

  In front of me, I have Satellite P500 and I use it almost 10 months now without a single update. What I'm updating are important updates from Microsoft. More than that and so far I didn't notice a single hardware or software problem.
  After reading your ad m a little confused.

  As far as I know Toshiba doesn't offer any DVD for that laptop, not any kind of pilot DVD so please be so kind and tell me which DVD driver is and who has created and offered this DVD.

  original is Win7 64 bit OS (original image of recovery Toshiba) preinstalled on this P500?

• Track Pad question

  Hello
  I have a ProBook and my cursor will not move once I log in... there is a light point size in the left corner of my Tracker Pad that is on
  What should I do to reactivate my cursor works?
  Thank you
  Herb72

  Hello

  Try double clicking the top left - if the light goes off, the trackpad is to be enabled.

  Kind regards

  DP - K

• Track Pad evil, mysterious symbols?

  I'm having some problems with my new computer and I can't find help, hope you guys can help.

  I have a problem when I accidentally hit some keys (I'm a typer sloppy) and I get these weird symbols on my keybord (the ones in blue and any combination of keys that I press, I can't reset it unless I restart my computer.

  (Photos)

  

  

  The second problem I have now is with my track pad. I have a bit of light on it (you can see at the bottom of the image, under the keyboard in the 2nd picture) and it lights up (orange) and I get this litle sign on my screen that fades, he has an image of a hand pointer to the block of follow-up with a red line horizontally across the image.

  After which appears, my track pad locks and I cannot use it at all, but the keyboard works (I have to restart my computer to get the track buffer to work).

  Please help me, I can't find anything on the internet.

  Hello

  Symbols in blue can be activated by pressing the fn key - the next time this happens, try pressing the fn button to see if that makes switch to the normal keyboard input.

  About the touchpad, the Orange light you see come (and disable the touchpad) are probably caused by double tapping the upper-left corner of the touch pad.  Double tapping this new area should toggle the Touchpad on.

  Kind regards

  DP - K

• How can I load or restore my original profile due to the absence of issue of the original rights of Windows?

  How can I load or restore my original profile due to the absence of issue of the original rights of Windows? My XP version is original and can not finish loading registry.

  Hi, route 66 Rock band,

  In addition to that suggested the PML, try this:

  Error message: "Windows cannot load the locally stored profile".

  http://support.Microsoft.com/kb/812339

• BSOD issues before and after a clean windows 7 installed

  Hey, I get BSOD issues after a clean install of windows and I also replaced my RAM with sticks again because I thought that my memory was damaged for some reason any. Is it possible that my hard drive is bad?

  Here's my minidump file:

  https://www.dropbox.com/s/paqnfyylg5yw2bw/012416-20420-01.dmp?DL=0

  Hello

  Since you did a clean install this strongly points to material with only one
  small chance, it is the BIOS, chipset drivers or others. Could be the hard drive, the
  wiring for the hard drive or other hardware.

  BugCheck F4, {3, fffffa800df48060, fffffa800df48340, fffff80002b97f40}

  ETW unavailable minidump
  Probably caused by: ntkrnlmp.exe (nt! PspCatchCriticalBreak + 92)

  Ntkrnlmp.exe is a component of Windows which means than anything else he has led astray.

  See this article:

  You receive various Stop error messages in Windows 7 or in Windows Server 2008 R2 when you try to resume a computer that has a large hard drive SATA.
  http://support.Microsoft.com/kb/977178

  ---------------------------------------------------------------------------------------------

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  ========================================================

  BCCode: F4 0x000000F4

  Check and reinstall the cards memory and cables (at both ends where possible) in fact
  delete and replace - do not just tight. On a laptop computer on all you can do is reinstall it
  memory and possibly check the connection/contacts on the hard drive. Memory could
  be the problem, so if you have more than 1 stick swap them in and out to see if the
  problem follows a stick or try the new memory. Antivirus/anti-spyware/security programs
  have been known to cause or have a role in this matter.

  More general patch updates day and low level chipset BIOS drivers and other software to control.

  Also check the wiring on the hard drive.

  =========================================================

  BCCode: F4 0x000000F4<-- read="" this="">

  * 1241.html http://www.faultwire.com/solutions-fatal_error/A-process-or-thread-crucial-to-System-Operation-has-0x000000F4-

  Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION
  https://msdn.Microsoft.com/en-us/library/ff560372%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  =========================================================

  These can help:

  Remove ALL power. Then carefully remove the cards one time and put them
  back in their locations. Do the same for memory, then the cables. A coward or
  corroded connection point may cause strange problems.

  Reinstall the expansion cards
  http://pcsupport.about.com/od/fixtheproblem/SS/Reseat-excards.htm

  How to reinstall a desktop memory Module
  http://pcsupport.about.com/od/fixtheproblem/SS/reseat_memory.htm

  The relocation of the supply and internal data cables
  http://pcsupport.about.com/od/fixtheproblem/SS/Reseat-power-cables-data-cables.htm

  Reinstalling your RAM, graphics card and hard drive
  http://www.YouTube.com/watch?v=DLxNPBQBfT8

  ---------------------------------------------------------------------------------------

  You may need to check with the mother system/card manufacturer or a computer
  Shop (that makes its own service in the workshop).

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• How can I get my ps 3.0 to install on my laptop? compatibility issues with the new version of windows

  How can I get my ps 3.0 to install on my laptop? compatibility issues with the new version of windows

  It is hopelessly outdated. It is simply not compatible.

  Mylenium

• G780 - issue of Track pad

  Hello

  Just got my Lenovo G780 for about 2 weeks now and I have a weird problem with the touch pad.

  1. whenever I double select something, so I immediately proceed to move my pointer, it does not have a second later. It's a very noticeable delay.

  (I also have the same problem when I type and use the touchpad, immediately after, it has a response time).

  2 when I double select a Word and move the pointer to my later, the selection of trails just along where I move towards which is annoying, because now I need to triple select to let the choice. On regular laptops and mouse, all I have to do is double click and everything what is selected without any problem.

  I encounter these questions with my USB mouse.

  Thanks in advance!

  Moderator comment: edited topic. Model added for visibility.
  

  Hi terramishu,

  From what I understand here that looks more like a software problem. What I suggest is for you to uninstall the touchpad drivers and restart your machine. Once the machine load let windows install the generic readers that it a. find the changes then.

  If the problem persists, try to download the drivers touchpad from our http://support.lenovo, com support site Please ensure that you download the correct drivers for your machine type.

  Let me know how it goes.

  Concerning

• Satellite M100 Track Pad failure

  I recently performed a 'factory restore' on a Satellite M100 (with Vista Home Basic Edition).

  It was hoped that this process would solve one issue was the recent failure of the functionality of the "pad".
  It doesn't happen if the problem persists.

  The customer is using currently a "Belkin" USB optical mouse instead, and it works without any problem.

  In the BIOS - I couldn't find any settings that can affect the Trackpad.
  Investigation on Device Manager"- no conflict appears and a consistent"HID"device as well as the mouse (which seems to have"captured"a PS/2 port) appears.
  Investigation on the 'Control Panel' - under input devices, the management software for both a mouse AND trackpad are indicated.

  It seems that the 'Trackpad' has been 'disabled' somehow but I can't locate where or how that could be done.

  What Miss me?

  Try to press Fn + F9 to toggle the mouse.

  If its still does not (and considering that you have completed the recovery), and then the Touchpad may be replaced.

• How to manage the padding issue &amp; bytes - ordering when you change the resource (PiPL) file in windows?

  Hi all

  I just started programming sdk photoshop. I noticed that the resources provided by Adobe Guide recommends to develop dialogs using Mac ground language and converting it into window using the CNVTPIPL resource file. EXE. If you use a windows resource editor, padding and byte-ordered issue must be handled by the programmer himself. Since I'm not sure what is the architectural differences between a PC and a Mac, can someone explain to me exactly how padding and byte-ording problems are handled under the windows resource editor? It would be good if there is no concrete example.

  Thanks for any help!

  You really shouldn't edit resources directly if you can avoid it.

  Simply modify the .rc files or Betty and recompile.

  Macintosh, used to use the big-endian byte order, but didn't for several years because they switched to Intel processors.

• Track pad pinch open and close does not not with Firefox 4

  pinch open and close feature to adjust the size on my touch pad Mac does not work

  The first part is the pref name and the second part of the command that you can use as the new value of the preference. Preferences have a value of empty string and you can double-click the pref to change the value of a copy and paste.

  browser.gesture.pinch.in -> cmd_fullZoomReduce
  browser.gesture.pinch.in.shift -> cmd_fullZoomReset
  browser.gesture.pinch.out -> cmd_fullZoomEnlarge
  browser.gesture.pinch.out.shift -> cmd_fullZoomReset
  

• Satellite A200 - IE7 windows 'restore down' when using the Tracker pad

  Hi, I recently bought a Satellite A200 - 1VO and when using the laptop without a windows mouse explore 'restore down' at random.

  I found a thread on the site of the Internet USER who said that if his past not with a mouse, it may need tracker drivers up-to-date.
  You can also consider its under warranty.
  Any ideas anyone?

  Hello

  It s a bit confused what you´ve writes down. What do you mean exactly, where´s the problem and what you want to tell us when writing:

  > and when using the laptop without a windows mouse explore 'restore down' at random.
  >
  > I found a thread on the site of the Internet USER who said that if his past not with a mouse, it may need tracker drivers up-to-date.

  Whereas it should be, where´s now the problem?

  Please give clear and understandable feedback, then I and other users you could point to the solution.

  THX

• MacBook pro 2015 stuck in Bluetooth Setup mode after commissioning, recognizes on the keyboard and track pad. SMC reset does not work.

  My Macbook Pro 2015 stopped periodically (and now permanently discontinued) responding on keyboard and touch pad Board. This seemed to start at the same time, I got a Bluetooth headset; When I turn on the computer, he's stuck in Bluetooth Setup mode. I tried to reset the SMC, and it does not work. I don't have a Bluetooth keyboard to even try with it. Also, I can't start in safe mode. It seems completely blocked. Any help you might be able to offer would be great!

  Hello rad trp,.

  Thank you for using communities Support from Apple!

  From your post, I understand that your keyboard and trackpad on your MacBook Pro are unresponsive and now you see the Bluetooth set up screen on the computer. I also see that you tried to reset the SMC, but that doesn't seem to work because the built-in keyboard do not respond.

  I know that you do not have a bluetooth keyboard, you can connect, but you have a USB keyboard? Even a USB keyboard for a computer Windows will work. If you do, I would say connection that the keyboard and you use these keys to perform an SMC reset, but reset the PRAM as well. Instructions on both of these resets can be found in the links below if you need.

  Reset the management system (SCM) controller on your Mac - Apple Support

  OS X Yosemite: reset PRAM your computer

  See you soon!

• HP Envy 15-q008tx touch pad issues

  Hi HP supports,

  I have a problem with my laptop HP Envy 15 - q008tx, permanent and recurrent I bought recently. My touchpad is not working properly (the mouse pointer is very laggy and moves by itself on the screen). I brought my laptop to HP to Alexandra SG TWICE service center for repair, but the issue is never resolved.

  I did some research and it seems that this problem occurred with other HP customers as well. Please see the links below.

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/HP-envy-15-q004tx/TD-p/4423918 http://h30434.www3.HP.com/T5/notebook-hardware/HP-envy-15-q004tx-touchpad-issues/TD-p/4364352/page/1

  As seen on the above forum discussions, some were able to solve it using the most recent driver from synaptic. I tried this solution but it didn't work as the mouse pointer continues to lag and move by itself, which is the recurring question.

  Kindly HELP me with this problem and hope to have this problem as soon as possible.

  According to the message that you have recently published, I want to confirm that it is a hardware problem and I highly recommend to immediately contact HP technical support by phone for further assistance without delay to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP