Tracker client 1.0 - which extends Customer Tracker

Similar Questions

• no more WiFi which extends from the airport express and Time capsule

  I have no more WiFi which extends from the express airport and Time capsule.

  and once it worked...

  airportconfiguration-app also works, but the graphic display allows to have a straight white line. now, it's one interrupted...

  Your unbroken lines in airport show connections ethernet utility... broken lines show the wireless connections.

  So it depends on the extend method you used.

  I think at this moment, things are configured wrongly... for some strange reason things happens and elements on a stand-alone basis, return to a default mode.

  The best way to manage it is full factory reset on everything... and repeat the installation.

  I have no more WiFi which extends from the express airport and Time capsule.

  It seems to me that you extend a NON-APPLE router... in this case, your Apple routers must connect by ethernet and create a wireless network. Routers Apple cannot extend the NON-APPLE router wired.

  The express could extend the TC or visa versa... by wireless...

  Then I suggest say us what is the main router in the network?

  You have connected by ethernet to the TC or Express or both?

  If so please reset completely the two elements and try again. Make sure they are in bridge mode... It's the network tab. Router Mode is turned off.

  

  And your wireless tab is configured to create a wireless network...

  Use the same name (SSID) and even the security setting and the password as the main router to network roaming (extend wireless ethernet).

  If the Express and transport CANADA are the same, both will have this configuration... If the express extends to wireless then it should NOT be connected to all the way to ethernet... (sequel to wan side at least) and it will be set to expand wireless on the wireless tab.

• Extended custom Interior Panel as a prelude?

  Hello

  I want to create a cutom extended custom panel inside the Chamber, extended composition, it is possible to create nested custom panel?

  Hi Chirag,

  I think that it is supported. I think that it is supported by HTML5. Prelude provides just a HTML5 engine. If you can do it in HTML5, then you can do it in custom panel HTML.

  Lei

• How to test the signal strength of an Airport Express, which extends a network?

  I am trying to understand how my Airport Express is actually help to expand my network, and if I should move somewhere different. Any help would be appreciated!

  Current situation: my base station is an AirPort Extreme in our apartment computer room; for the internet, which is plugged into the wall. The wifi network is extended in the living room via an AirPort Express (version 7.6.4). There are on the same cabinet as the AirPort Express to Apple TV. The Airport Express has an optical cable connecting to a sound bar (which has an additional HDMI connection to the TV).

  I don't really know if the AirPort Express Terminal, he does something useful. The network is set to be extended, best I can tell: Airport Extreme network Mode is "Create a wireless network", and network Mode of the AirPort Express is "extend a wireless network. But still, the wifi on my iPad and iPhone signal strength seem to fall much in the living room. Apple TV usually broadcasts music from my desktop computer (in the computer room) well enough, but if I try to play music from my computer via the Apple Express at the soundbar, the connection is terrible and fall. (Which could be a problem with wifi, or could be an aging Airport Express question, could be a cable problem or might be a sound bar problem...)

  An example of what worries me: if I go to the Airport utility on my iPhone and a glance at the Airport Extreme, it has 4 Wireless, including Apple TV clients. But if I look at the AirPort Express, there sometimes a client wireless (iPhone), but never shows the Apple TV: even if the Apple TV is about 30 cm of the Airport Express. It's as if the 30cm distant to the Airport Express connection is weaker than the connection of two-rooms-distant Airport Extreme, but I am probably wrong that.

  In any case, is there a way to test what speed is through the AirPort Express, compared to through the extreme? I tried to use applications like CloudCheck on my iOS devices, but those only measure the speed of my network, and it is unclear whether or not he uses the Extreme or Express.

  Thanks in advance and all apologies if I used (almost inevitably) 'Express' when I should have used "Extreme", or vice versa, somewhere at the top.

  One way to see the strength of the signal is the Alt (option) key while clicking on the WiFi icon in the menu bar.

  But you see not directly related to the airport of arrival. Also the Airport utility does not give much information.

  You can see a lot more with the free app (Appstore) called "WiFi Scanner".

  The problem could be that the place you have chosen for the Airport Express can be better: it should be somewhere in halfway (in force) between the Real and where you sit with the iPad/iPhone.

• Need Suggestion for background replacement (which extends tiles with Perspective)

  Hello

  I'm all a web developer before... not a photo Retoucher. I don't have a lot of Mothering (although I'd take ) but just a few suggestions. I have a typical case where a customer is going to give me a narrative which must be replaced. Usually I can work some 'magical' with content-aware fill and hide but I get a surprising number of shots such as this, where there is a background with a repetition of 'something' that must be repeated/extended and maintain the perspective. Below was my first shot at a "dummy" effort that shows what I'm trying to find out how. I just copied/pasted a selection and used content-aware-scale of wobbly way "Frankenstein." I hope that there is a better way I'm too ignorant to have figured out! In addition to extending the tiles, I need match the light/shadow. Advice or some books/tuts suggested would be VERY much appreciated.

  Oh Yes... I use Windows C5.5 (not made to the cloud yet.)

  TIA,

  JC-

  Be

  I would try the vanishing point.  It will be a problem to get the corresponding color.  Maybe almost better just to recreate a tile background.

• VPN client 3-party which connects to ASA

  Hi all

  There are some users allowed to connect via VPN using the Cisco VPN client.

  We have seen some users who connect with different clients e.g.: http://www.shrew.net/download/vpn

  I just tried it myself.

  Simply download the client, Import FCP, and connect to the ASA.

  The question is...

  The only way to prevent VPN users to connect with any client besides the Cisco VPN client is by defining the type of customer authorized to VPN on the SAA?

  The fact that anyone with a VPN profile can use another client to connect does not any security risks?

  Federico.

  Should not be a problem because it uses the same protocols IPSEC to encrypt/decrypt packets. A possibility is that if she is not comply 100% with the standard, it can could potentially cause unwanted behavior on the SAA.

• Maintain a fixed width design, but which extends from the background with responses?

  Hello!

  I'm working on a site teaser for a kickstarter for a client campaign. I have the design done in Edge animate CC, with a scrolling Parallax mapped to the timeline.  I want to maintain the appearance of width fixed of the drawing or model and hide the overflow on x, but extend the background color for the browser window.  Can someone help me with how to do this?  Site link below.

  http://www.chadwelchart.com/ruinsaga.com/

  Thanks in advance!

  Chad Welch

  Hello

  (1) "hide the overflow on x' ==> sym. $(«elementName») .css ('overflow-x', 'hidden');

  (2) "toextend the background color" to the ==> the $(«body») .css ('background-color', "yourColor"); "

• Taskbar Windows 7 which extends over several screens

  Is it possible to extend the taskbar windows 7 on 2 or more screens other than to cross the taskbar using third-party software such as ultramon? It would be nice to have the aero peek on my second monitor feature.

  No, he has not taken native support for Windows 7 RTM for spanning the taskbar on multiple monitors. You'll have to depend on a third-party utility such as Ultra Monday Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• Jpg which EXTENDS only not to THE BROWSER

  I have 1. drawn 2 boxes. used to 'fill' to fill the box with the jpg

  I am able to select "extend to the width of the browser" - it is checked and sizes down fine but it does not stretch.

  T blocks of color above and below he are, but there are white lines on each side of my image.

  The box is checked. It is just not to do so.

  I tried stretching beyond the edge and by selecting again. My photos are calibrated at exactly 1200 (150-medium resolution) - should they be dimensioned larger?

  On your test site (a single image):

  Your site behaves completely predictably.

  You have used the image as a fill for the rectangle. The rectangle is set to "Stretch to the width of the browser", but "Fill" options are not properly chosen.

  You need to change two options:

  1 change your settings to "Fill in" for this:

  

  2. allow your page to extend across the browser by clicking on the double arrow next to the bar of breakpoint:

  

  If you want the image to scale proportionally not only in width, but in height, place it directly (and not as a rectangle fill) on your page, across from left to right until appears a red guide line and turn on "resize: Width and Height reagent.

  Regarding your second site file: Please he put away and repost, so we can see the problem more clearly.

  A proposal: If you have no experience in the use of Muse, it would be better first to add without using tons of 3 party widgets, because these widget can introduce problems in your site.

• Which extends from a treeTable inside a panelSplitter

  I use JDeveloper 11.1.2.3. I put an af:treeTable in the first part of a vertical af:panelSplitter, and the separator is one facet of a page template, which puts him in the center of a panelStretchLayout facet.
  I can't get the treeTable stretched for use across the width of the left panel. Here is the code:

  <af:panelSplitter id="ps1" splitterPosition="300"
            shortDesc="Left Side is Services, Right is Location" firstBorder="all"
            secondBorder="all">
       <f:facet name="first">
            <af:treeTable value="#{bindings.ServiceCategoriesView1.treeModel}" var="node"
                                selectionListener="#{bindings.ServiceCategoriesView1.treeModel.makeCurrent}"
                                rowSelection="single" id="tt1"
                                summary="#{viewcontrollerBundle['servicesCriteria.selection_SUMMARY']}"
                                columnStretching="multiple" styleClass="AFStretchWidth">
                 <f:facet name="nodeStamp">
                      <af:column id="c1"
                                          headerText="#{viewcontrollerBundle['servicesCriteria.selection_LABEL']}"
                                          rowHeader="unstyled">
                           <af:outputText value="#{node}" id="ot1"/>
                      </af:column>
                 </f:facet>
                 <f:facet name="pathStamp">
                      <af:outputText value="#{node}" id="ot2"/>
                 </f:facet>
            </af:treeTable>
       </f:facet>
       <f:facet name="second"/>
  </af:panelSplitter>

  I tried a number of things, like surrounding the treeTable with a panelStretchLayout, putting the styleClass = "AFStretchWidth" on the other components, the different parameters of the columnStretching attribute. Probably I'm missing something pretty simple and fundamental.
  Thanks in advance for any help.

  You specified columnStretching = "multiple" for the TreeTable. The value "multiple" waits stretch columns have width specified as percentages (but your column has no such specified width). Specify the width in percentage for that column (for example width = "70%") or simply set columnStretching = "last" for the TreeTable (for as much as you have a single column).

  Dimitar

• Can I extend a controller which extends already?

  Hi friends,
  
  can I extend controller or vo eo that is extended alfready, if so wht precautions I need to take.

  GK,

  Is the TextInput Bean is readonly or disable, then you will not be able to extract the value directly using the pagecontext.

  In this scenario to make use of the vo and attrribute attached to the bean.

  vo.getCurrentRow () .getAttribute ("");

  Kind regards
  GYAN

• Which extends the size of the hard drive

  Hello!

  I used to be able to extend a virtual hard drive easily in just change the settings of the virtual machine and entering just my new size. Somehow, after the upgrade to vSphere, it seems almost all my hard drive got dimmed and I can't extend more except on a few machines.

  I checked free space on the SAN, but the problem is not there.

  Clues? ^^

  I use the parallel LSI Logic driver.

  Thank you!

  question side: is it possible to convert a thick disc or a way to achieve the same goal without too many problems?

  Thanks again!

  The virtual machine that has snapshots?  Have you tried to extend the drive manually via command line and vmkfstools?

  -KjB

  VMware vExpert

• How c ++ extend customer use getLockAll function

  Hello
  I use ContinuousQueryCache to add POF objects to the cache. I need to lock hide any additional data. But when I call following function, it says remote RemoteNamedCache does not support the LOCK_ALL function.
  
  Code: Object::View globalLock = ContinuousQueryCache::getLockAll();
  
  Is there a way that we can achieve together cache lock.
  
  The main reason to follow during data added, we do not have a way to call cache-> lock (key) function. Because we do not yet have a key. In order to achieve that we thought to block cache everything. Even when we start to add a lot of data objects internal structure might change and it would increase to hold many objects of memory. If we don't lock him up two data inserters could screw up the internal data structure of coherence and screw up the whole program.
  
  Please guide me how to reach above requirement. With shared memory, we can have in the lock of the process and who comes first will get the lock and no one can recover so shared memory will be safe. Even if we can have a mutex locking device, it would be great.
  
  Kind regards
  Sura
  
  Published by: Sura 12 August 2011 00:44

  Hello

  Partitioned cache can't lock all anyway. Instead, you can use a special key that your process will be thread as mutex. Convetion single process with the lock on this key can work. Also for consistency * Extend have loack service is disabled by default (and why). Also if you use for example "LOCK_ALL" string as your mutex, there is no need for the entry with the key "LOCK_ALL" to be present in the cache (locks are totally independent of the data entries).

  
      ...
      
          
              true
          
      
          
  

  You should upgrade this proxy service configuartion for activate locks.

  Kind regards
  Alexey

• which extends from af:panelTabbed component

  Hi all
  I have an af:panelTabbed that contains 3 tabs in the middle of the tab width is very large because it contains a table and also the height becaule he table so that train under him.
  I applied styleClass = "AFStretchWidth" to the af: panelTabbed but it only extends the width to the height of the tab but have.
  So, how can I stretch the height and the width of the tabs...
  
  -Thank you.

  In the game of af: showDetailItem the StretchChildren property to true... that should do it.

  Concerning
  Grant Ronald
  Author: Merger Oracle JDeveloper, Oracle ADF development Quick Start Guide

• Want a TextInput which extends the FlowElement element

  I am writing an application in Flex tutorials and find Text Layout Framework useful, except that I have many fields in case of entry must be in the flow, such as the following:

  First of all, there might be a question _ and _,

  _, then there could be another question _.

  The input field doesn't have to be a RichTextEditor, simply to be able to move in the flow of the text if this format is maintained if a user increases the text size.

  I've seen statements in this forum that the TLF was not designed to be extensible, making it a difficult task.  The only alternative I see is to put objects RichText text and enter into objects TextInput fields and write a controller Format which positions these lines given the position of end of each and perform needed line breaks.  Someone has a better idea?  The problem seems a little odd given the ease to do in HTML.

  Gary

  There is a blog entry, that I found on this topic - I haven't read through it, but you can check:

  http://platustalksflex.blogspot.com/2010/07/position-UIComponents-inside-textflow.html

  There is a thread of related forum.

  -robin