Trackpad and usb mouse stop temporarily when the power adapter is connected

It is a very weird, crazy question. It began to happen today.

Introduction: I installed ubuntu since 2008 in this laptop from version 8, now I installed 11.04. My brother has the same problem since a month there is around. It has the same model of laptop (DV9000 HP), but Windows Vista computer.

The problem: mouse freeze random by 1 or 2 seconds, the two mouse pad and usb mouse attached. When I unplug the AC adapter, mouse works well immediately.

Indices: I forgot my adapter in my apartment this week, and I got my brother to work here (the House of my parents). And another hint, I used a power adapter for cars, today give it a 19, 7V instead 18, original 5V AC adapter. My brother also use this car adapter.

Hey, try to get the other original AC adapter. My laptop has become normal when I got my power adapter. See me first post

Tags: Notebooks

Similar Questions

  • Satellite Pro L20: battery not charge when the power adapter is connected

    Hello

    all advice appreciated.

    I had a Satellite Pro L20 for about 18 months. Recently, battery does not charge when the power adapter is connected. The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile. However the ACPI often said that AC is "offline."

    There are two recent occurrences that coincide with this problem, I try to eliminate:

    1. my friends rat chewed by the feeder for pets! Power is Mobile OK insofar as he fled sector - the rat seems to have simply chewed by the outer cover (I see some threads, but I think that is just a shield, although I'm not an electrician).

    2. I put the laptop in hibernation for the first time. That seemed to mess up the system a bit, which was what initially drew my attention to the problem. This question is a bit complicated because I'm under Linux (Xubuntu).

    I updated the drivers etc from windows when I bought the laptop. Never had any problems until now and have been running linux for centuries. Also, I have mainly the laptop the power supply turned off, but do not remove the battery (is that really a problem these days?)

    I obviously need to replace the adapter, but is - it is likely (and how I can check) that the battery was borked until?

    see you soon
    Chris

    First, please check if the other are lit.
    If the AC led and power led are on the adapter sector is ok and it provides the power to the laptop.

    > The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile
    If the battery LED is yellow, this means that the battery is not fully charged and if the Green led changes then recharging is caught and the battery has been recharged.

    So I really don t see any problems with the charge process.

    Maybe the battery is old and so you cannot use it for an extended in such a case only the replacement of the battery could help.

  • Computer HP laptop goes black when the power adapter is connected

    Hello, g ' Day

    I have a HP Envy Sleekbook m6 and just today I realized after plugging in the power adapter tge screen woul go completely black. I can hear the cell phone still in market, but I don't see anything. If I play music until the screen goes black, it stops. I tried to change the power plan to see if that would settle the matter, but it does not work. Is there a way I can fix this?

    Thank you in advance.

    Hi jessiecornwall,

    Thank you for the information. I suggest you go to Device Manager and right click on your graphics card and update was from there. Here is a document of Manager of devices for Windows 8 information which has steps for the error codes you get.

    I am also including this document for an Overview of the switchable graphics or Dual GPU that explains what they are and how they work.

    I hope that this information help, please let me know how it goes.

    Thanks and good luck!

  • Satellite A130/135 dies when the power adapter is connected

    Yesterday, my laptop satellite A130/135 completely dead in use.
    Even the lights indicating that the laptop is plugged into the custom of light.

    I read today that by removing the battery, hold the power button and place the battery back in place, I could get the laptop to turn it.
    It worked, but after that my battery is low I plugged my power adapter and the laptop is returned to its State does not.

    So now I have a limited amount of battery power and it does not load.
    Yes, what's wrong with my computer laptop/battery/adapter

    How can I solve this problem?

    Hello

    I found your other thread:
    http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=143840

    It seems that the problem might be related to the hardware failure and all you can do is contact the ASP in your country.
    I put really know what might cause this problem but I think it could be something wrong with the motherboard

    To check the device by a technician of ASP.

  • Satellite A300 stops when the power adapter is connected

    Hello!

    Yesterday, I bought a new Satellite A300. I plugged it in, worked some time with her and then I decided to stop it while it was plugged.
    The computer has stopped working, but in a few seconds, he started alone.

    I tried to do it while it was disconnected and there is no problem, but when it is plugged the problem persists.
    I would be happy if someone can help me!

    Thank you very much!

    I would try a BIOS update. You can download it here: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  • Keyboard and USB mouse stops working and kicking in and out.

    Hello

    I'm having a problem with my keyboard and USB mouse. Both at the same time stop working. Also, the mouse freezes every 10 seconds for 1 second (so boring). When the mouse stops working there is still of the red laser that is below normal. I am confused with that. I have all the latest drivers.
    Thanks for the help.

    Sys Specs: Windows 7 pro 64-bit, Intel DP67BG, HyperX 6 GB DDR3-1600 (3x2Go), Intel Core i7 - 2600K 3.4 GHz S1155, WD Caviar Black 1 TB 7200 rpm 3.5, EVGA GeForce GTX 470.

    Hello

    If you have a USB mouse wired and keyboard connected to your computer, and that they do not work properly, please check following things:

    1. Firstly, plug the USB into a different port on your computer. If they still do not work...

    2 try them on another computer! and if the problem is still there, it would be easy for you to just replace. But is not likely to result in the mouse and the keyboard does not at the same time!

    2 and if it's OK with another computer, which would be something wrong with your computer, and it could be from a hardware or software.

    Just see how it is done up to now.

  • Satellite Pro A200 (PSAE4E) - power off when the AC adapter is connected

    I bought this laptop for my wife about 2 years, since about 6 months ago, that the laptop was randomly shut off without warning, this only seems to happen while the power supply is connected as well.

    I have read several other posts on other sites with people having similar problems.

    There are various suggested corrections, you must disable the duel core in the bios so that it works only on one heart and he spend dynamic low for fans. I did this about 2 hours ago and touchwood not a single switch off again. This however is not an acceptable solution, there is obviously much more slowly.

    Another suggestion has been updated the bios, I downloaded it now but am very worried to run it, this laptop can stop at any moment, lasting from a few minutes to a few hours. If it stops while updating to bios, I doubt that it would be good news. I don't want to make it work on the single core for the rest of the day/night to see if its stable and then go for it.

    Before that, can I make a call to the toshiba helpline, I read on the forums that this is as well a defect of design within the laptop and there's a reminder of some of the laptops in the Canada, I do not know how it rings true but still a concern to read and might be unacceptable to the owners of the A200.

    Others have advised that it is an overheating problem, it's that I reject, I running SpeedFan and showing a stable 47 temp and it allows to switch off the coast immediately when turned on, yes it could be due to dust build up, something I checked and cleared, it did not a difference for the frequent switch offs.

    Im not too well why it is only when the power supply is connected, I have not tried a different PSU, but those who have had the same problem try this and it has not solved the problem.

    When I unplug my power as well the battery seems last mabye 5 minutes at the most.

    Overall, Im very unhappy all this, toshiba is a brand of 'high' where you expect better quality and pay for it.

    If anyone has any suggestions please let me know, would be also good to hear talk of toshiba support on the issue.

    Concerning
    Florence

    Hmmmmm... interesting.

  • Satellite L655 - questions turn on when the power adapter is unplugged

    Hello

    I have a problem with my new Satellite L655. When the power adapter is disconnected and wireless is disabled, the laptop can turn on for less than a second turn it off again. OR turn 'power' and 'Wireless' turns on, but black screen and hd light; After startup bios of 30-40 seconds, the wireless light turns off and hd lights; OR turn on normally;

    Toshiba has changed the motherboard a few days ago, but the problem persists. Update BIOS. My laptop is the only one affected

    Thank you in advance,
    Maurizio.

    Hey Buddy,

    > Toshiba has changed the motherboard a few days ago, but the problem persists
    So have you contacted already technicians again? You must tell them that the problem is still not resolved and it must be another reason for this problem. Then get in touch with technicians again to clarify this issue.

    Have you connected external devices while laptop is turned off?
    -Online if yes remove each of them.

    Load default settings in the BIOS?
    -Online if it is not this. Enter in the BIOS, and then press the F9 key to load defaults.

    Otherwise, it would be time to service as I have already written. It must be a nuisance material

  • His acute appears when the power adapter is plugged into satellite

    Hello

    My laptop is four days old, but when I use it and the power adapter is connected and provide electricity, a steep, low sound volume is issued from the fan area. When I remove the adapter it disappears usually, but sometimes intermittently returns in the form of a stuttering occasional, typically when I use many processor programs.

    I also noticed that, if the sound is not present and yet I increase the brightness of the screen in the properties of the TOSHIBA power saver, he'll be back with a vengeance. In addition, the power supply makes the same buzz, but at least I can sit several feet from it.

    Can someone therefore please tell me if this buzz / your electronic is normal, or if there is something I can do to prevent it being issued?

    Thanks for any help.

    [email protected]

    Hello

    I think you should contact your dealer / ASP with this problem. It seems to me that there is some sort of component inside the PC that generates this noise when the processor speed is high.
    Also if the power adapter is buzzing, you must show this to them as well.

    It does not seem right that the unit should behave like that.

    BR

    Tom

  • The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

    The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

    Original title: clear the display

    Click Start or press the Windows key and type power can locate the power to change recording settings in the section of the Control Panel from the list above and click on it. At the opening of the Power Options pane, click choose when turn off display available on the left side.

    Choose a new setting for brightness in the drop down menu on the battery . Look at all the other parameters that you feel you want to modify, and then click save changes in the lower right to apply the options you have selected energy saving.

    You can now close the Power Options pane when you return.

  • HP Pavilion 6500 goes out when the power adapter plugged

    My Pavilion 6500 (specifically dv6623cl) turns off when I plug in the power adapter. If I plug it in, then turn on the laptop, it automaticly turns off before loading windows. If the laptop is already started, and I can plug the power adapter, it immediately turns off. I can charge the battery without any problem, also while the laptop is turned off, but as soon as I turn it on with the adapter plugged it stops, I checked the battery through HP battery check and he said its good, he is holder of a charge very well and everything, the only change made to the laptop hardware wise was an upgrade memory I had no such problems until the upgrade of memory, but I do not see how it would affect the power on the aspect, in order to make a system restore, if ever, I need, the poweradapter must be plugged and theres other system functions that require the adapter complete, it is a question that must be corrected

    any ideads what the problem would be?

    any help is much appreciate

    Thank you, rayandmaura

    Talk to a jury of uselles / forum, do those who seek info on how to reset / bypass the bios password on their (or anyone elses) computer or something as it gets 20 pages of answers, but asking a power / card issue and your luck if you get a response at all,

    I'll just give up to deal with this useless community and just buy 3 extra batteries and remind all of the accused

  • Satellite A300 may depend on from when the power adapter plugged

    Hello

    I have a problem with my Toshiba Satellite A300 when the laptop is connected to the power adapter I have no possibility to turn it on, it's only 2-3 seconds once it comes down.
    When Toshiba is enabled with the battery power and I tried to connect the adapter it also goes down.
    I have no problem with the charge itself, but only with working with AC adapter.

    Please help me what can I do with this problem, does anyone has similar problem?

    Hello!

    For me it sounds like a hardware failure of the motherboard if the AC/DC adapter is plugged and the laptop is turned on

    I don't know but how best to m would be if you go to the authorized service provider nearest with the AC/DC adapter. Technicians can check your laptop and swap the motherboard if it of really necessary. The guys are very friendly and helpful!

    Here, you can search the nearest ASP:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

    Good bye

  • Tecra A5 PTA51E stop start if the power is not connected

    Hello everyone, I have a problem with my Tecra A5 PTA51E.
    The laptop stops the start if the power is not connected (works with batteries). First of all, I see the Windows Logo, but then I have black screen. LEDs and fan are on. I have to restart the laptop 3 - 4 times to get a full boot and see the Windows XP login window.

    I tried to update my bios, but I find the same problem also with the latest version (v2.10) installed.
    I also tried to disable saving energy Toshiba but nothing happened. Battery is charged and don't play no beep alarm.

    Thanks for help.

    Hello

    It is not easy to tell what can be the problem, but I recommend you to set the default BIOS settings. I put t know if this will help because I guess that is not material just a software problem.

    Best way to test it to install the OS by using recovery media.

  • Keyboard and USB mouse stop working correctly with Windows 7 Professional x 64

    I originally had Windows Vista x 64 on my computer (he's 8 months old, CPU intel quad core 2.0 ghz, 6 GB of ram etc.). I installed Windows 7 RC in July (new installation) and used until 2 weeks ago when I installed Windows 7 Professional edition (I reinstalled Vista and then installed the upgrade to Windows 7 by using the clean installation).

    In recent days, I had problems with the mouse and keyboard (the two connected USB). Entries to start acting strangely. For example, using scroll in firefox causes the font sizes change in firefox, instead of scrolling and clicking on links opens the link in a new window, not in the same window. Right click stops running. The keyboard input will simultaneously strange - I can type is no longer (for example in firefox search boxes, or WMP), of if I type, it uses another command to open something, etc. I don't understand what is happening! However, after the reboot, the problem disappears and everything works fine, until the next time it happens (has happened 3 x now). I tried my mouse and keyboard in my old laptop and they both seem to work well. I have not received any pilot error / virus messages / dysfunction (Bitdefender 2010) messages of any kind, and as far as I know, all the drivers are up to date.
    Anyone know what is happening? Is there something wrong with my motherboard? And if so, why are there no error message? And why things work again after the reboot? Help, please!

    Hello

    Update the drivers for the keyboard and mouse should solve the problem.

    $C God will not look you over for medals, but for scars. Each winner has scars; I do this either on the same heart

  • Satellite L20: Can I disconnect devices such as USB mouse without turning off the power?

    Hi all.
    I am owner of laptop Satellite L20. I always turned off power to my computer when I need to connect or disconnect a USB device. Some devices have a special icon on the toolbar disconnect them, but some don't (FDD USB or flash drives). Can I disconnect and connect devices such as mouse USB or Scanner wihtout turning off the power?

    Hello

    You can disconnect the external USB devices without turning off the unit, but you must use the option "remove hardware" before you cut the material.
    The icon "Remove hardware" usually appears with resources such as hard drives or USB key have the ability to buffer data. It of necessary for this buffer to the device before emptying it is disconnected

Maybe you are looking for

  • I ran avg today. Firefox no longer works. I tried your solution via avg interface did not work I have avg 2012. The applications seem different. I need someone to wal

    I ran avg 2012. Now that Firefox is not running. Checked through support got a current download at AVG firewall and trying to remove then add then click on... He says then go to the firefox installation directory (where is that) go to the Mozilla Fir

  • Admiral: Y at - it update?

    Until when can we expect an update? The direct connect on nextel phones is growing even in the same areas I've ever had a problem now becomes a. Sprint to connect was absolutely not ready for the market and I am sure that all consumers can say that!

  • Compatibility of MW1

    Hello I have a Sony Ericsson Xperia Pro and HP Probook 4520 s laptop (win 7), I need a helmet for most to use apps on my mobile as Viber, Skype, oovoo, LINE... and also use it for software on my laptop, like Skype, yahoo Messenger and also listen to

  • Waterfalls, the AbstractPane subclass

    Is subclassing AbstracePane to create custom cascading screens possible? If so, he is encouraged? I'm trying to wrap my head around custom controls and where the logic off section for types of split-screen. For example, if I have the list of FOOs, an

  • Migration of database 10g database PDB 12 c classic

    Hi allMy Source details:------------------------Oracle 10.2.0.4SPARC Solaris 10Base size of 20GThe database name: ORCLMy target details:------------------------Oracle 12 c (12.1.0.2)SPARC Solaris 10The database name: PDBORCLPlease help me with the co