Transform the shaped form

Similar Questions

• How to transform the 2 forms in 1?

  Hey there everyone...                                                                              Level: Newbie'ish OS: Win7 64 bit PS: CS6

  I would take 2 forms of rounded Rectangle I have rotated 45 degrees and make them a form so that the paths of each rectangle become a.

  I looked upward paths, shapes and other things in the manual, but I have been unable to contain the right keywords to find what I'm looking for.

  I used the pen tool, but I'm not satisfied with the result of the rounded corners. I know that I can use combine shapes, but not when I need first rotate the shape.

  Sure I've done this before, but for the life of me I don't remember how I can find it in my notes, or.

  Here is a picture of what I want to turn it into a form with a continuous path.

  

  Of course, would appreciate your ideas and any links to the info that could help me accomplish this

  Thank you for your time.

  Target the two shape layers, press Cmd / Ctrl + E to merge into a single shape layer. The SL will, so to all active shape/path tool, select Merge elements of shape in the Options bar.

• I'm trying to select several images (Forms), but I have not found a selection tool. This selection tool to transform the mouse cursor in an arrow and it is possible to select several images or figures. I use Microsoft Excel for Mac 2011 Version 14.5.3.

  I'm trying to select several images (Forms), but I have not found a selection tool. This selection tool to transform the mouse cursor in an arrow and it is possible to select several images or figures. I use Microsoft Excel for Mac 2011 Version 14.5.3. Thank you!

  tupensi wrote:

  use Microsoft Excel for Mac 2011 Version 14.5.3. Thank you!

  Then you should post on the Microsoft Mac forums where to hang out the gurus of the Office, as is the Microsoft product, with that you are having problems:

  http://answers.Microsoft.com/en-us/Mac

• Transparency on the converted forms

  Hello

  I use this effect in the appearance Panel to create copies of the form that overlap. I was wondering if it is possible to set the transparency of the copied form so that you can see the shapes under it.

  Please see the attachment. Left is the effect of the applied transformation. I wish that these forms behave as the form on the right.

  Tips on how to achieve this without developing the appearance?

  Apply transparency settings to fill only (and not the object).

  Then, the effect of transformation to the object.

  

• Why not transform the work? I'm doing a simple resize a smart object, and I constantly have problems. do not transformation. I had this same problem on several images and I've just updated to the latest

  I had frequent problems trying to resize the smart objects - I am unable to use the transformation. I had this problem on several images. I had some success by restarting Photoshop CC and Windows, but this does not always solve the problem. Is this a known issue? It's really annoying. I had this problem before the last update, and it continued after the most recent update.

  Hi djdphotography

  • You also have the same result if you create a layer duplicate the layer of the same image?
  • Also be sure that you do not have the Quick Mask mode by mistake (press Q to turn it off before you select the transform tool)

  

  Useful article:-Photoshop help | Free transformations of images, forms and paths

  Concerning

  ~ Assani

• Preventing duplication of the irregular forms button

  I designed a website using Illustrator and imported into Flash Catalyst. The design uses navigation triangle-shaped buttons. When CF makes in a button, it does so in a semi-transparent square instead of a triangle. Unfortunately, because triangles are staggered, a button almost completely covers the button next to it. (you can't see it, but you notice when you try to click on it) Is it possible to use the buttons resize/move or change their shape?

  Unfortunately, the bitmaps are somewhat more limited - across the rectangular region is sensitive to the mouse.

  If your original design consists of vector shapes, then it is easy to work around this problem.  Just delete the bitmaps and imports the original back in.  Then, instead of using raster, use optimize vector graphics.  This will give you more performance and benefits of memory, but the sensitivity of the mouse will follow the exact outline of the vector shapes.  (Like the icing on the cake, making in this way allows you to return optimization and change the individual forms again later if you want).

  Hope that helps,

  -Peter

• I use the latest version of firefox, but cannot print all downloads. I tried to use the icon to print the downloaded form and also control P

  I tried using the icon of the downloaded form printing and also control P, but only get a blank page. I even changed my printer, but it did not help. My print menu looks the same, and I have quite everything, print only with downloaded files.

  Hello, it's currently a bug in firefox's built-in pdf viewer that is studied by our developers. in the meantime, you can use a plugin third pdf as Adobe that you can enable in the firefox options > applications -scroll down and set the default action for the portable document (pdf) format.

  How to disable the built-in PDF Viewer and use another Viewer

• Firefox makes my filling out forms online when the standard form of information such as name, address, e-mail, phone number. I went just from Goole Chrome who had this feature.

  Google Chrome would provide drop-down list prompt you for this information that I started to enter the information. I would just like to point out the correct prompt and press enter and the information must be entered in the online form.

  See:

  • Tools > Options > privacy > History: "don't forget to search and form history."
  • https://support.Mozilla.com/kb/form+AutoComplete
  • AutoFill Forms: https://addons.mozilla.org/firefox/addon/autofill-forms/
  • http://autofillforms.mozdev.org/Drupal/content/main-page

• Can I enter both a table and a constant of double precision in the VI form?

  I would like to calculate a new 1 d array using the formula VI. LabVIEW 'smart enough' to enter a 1 d table and a double precision constant in the VI form and leave a 1 d table receives basic commands?

  For example, can I enter [1 2 3] table and the constant [2] and say "table * constant-1" in the VI form and get an output of [1-3-5] or do I have to make a loop for or something?

  The Express VI formula seems that it can have up to 8 inputs.

  Twolfe, the best way to find an answer to this type of question is to try it.

  I didn't know this (because I have no reason to use that express VI), but you can wire a table to it.  He treats like any other LabVIEW operation on arrays.

  But if you were to make a loop, then you should already be avoiding Express VI and start making actual emissions.

  

• How LabVIEW can press a command button in the Access form?

  Situation: access database with a command button, which generate code after you have pressed

  Task: LabVIEW open the access database, you press the command button and read the code

  Status:

  • Use activeX to open data access - ready
  • Press the control button - open
  • code - open reading

  Problem: is there a possibility that LabVIEW automatically press the button in the Access form?

  Dear Mike,
  Thanks for the reply. You are right that MS Access is not really a database. ;-)

  When the operator will push the button, the program generates a serial number and add the new number in the article table.
  Therefore, by pushing the button means process this code.

  Solution
  After that I became the password to unlock the database, I have check the code behind the button and build it with LabVIEW.

  So it is not necessary to press the button :-)

• The resizing of the Windows form performs a test of the Windows XP computer.

  Original title: resizing the form event performs.

  I have a c# program that uses the Windows form resize event. On my Win 7 and the machine on 1 of my XP machines

  the program works very well. However on my other XP machine, the resize event fires prematurely when the application

  is current initialization blowing toward the top of the original graphical user interface of the application.

  The two XP machines related worm 5.1 build 2600.xpsp_sp3_gdr.111025 - 1629 as the operating system.

  The obvious question is "why would be 1 machine to fire prematurely the windows form resize event when the other.

  "2 machines to not"?

  Any help/comments/suggestions will be much appreciated.

  TIA, Joe

  Hello

  I recommend you ask your question in the forum MSDN for assistance:

  http://social.msdn.Microsoft.com/forums/en-us/categories

  Hope the helps of information.

• Windows Media Player keeps reversing information of track that I edited to the modification form, destroying hours and hours of work. All I can do to stop it? Thank you.

  Windows Media Player keeps reversing information of track that I edited to the modification form, destroying hours and hours of work.  All I can do to stop it? Is it possible to change information so it cannot be changed by WMP? Thank you.

  Hi mynamesv,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow the steps in the article.

  Resources for the resolution of problems in Windows Media Player

  http://support.Microsoft.com/kb/843509

  Method 2: You can re-create the database of Windows Media Player and see if that fixes the problem. Follow these steps:

  (a) output Windows Media Player.

  (b) click Start, type %LOCALAPPDATA%\Microsoft\Media Player, and then click OK.

  (c), select all the files in the folder and then click on Delete on the file menu.

  Note: You don't have to remove the folders that are in this folder.

  (d) restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  (a) output Windows Media Player.

  (b) click Start, type %LOCALAPPDATA%\Microsoftand then click OK.

  (c) select the folder Media Player and then click on Delete on the file menu.

  (d) restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

• Under XP, when I try to install the program screen flash BACK and trying to change back, but then return to the windows form.

  When I run the Setup in the program screen flash backs and trying to change back, but then return to the windows form.

  * original title - back program will not be run. *

  How old is this program and what is his name?  If you give us the name of the program someone read here who have experience with the peculiarities of the program might be able to provide more help.

  Open a command prompt, and then try running Setup from the command prompt.  To start a command prompt, type CMD in the box run from the start menu and press or click OK .  At the command prompt, you can use the CD command to navigate to the CD, or you can run the Setup program by using the full path to the Setup program, for example:

  x:\Install.exe

  where x is the CD drive letter.

  John

• I want to send my message by mail with the email form that I have already installed

  I want to send my message by mail with the email form that I have already installed

  original title:<>

  Hi Michael,

  I suggest you to check if you get the same message in Internet explore, if you use Firefox I suggest you contact Firefox for using the link below.
  http://support.Mozilla.org/en-us/questions/new/desktop
   
  Hope this information helps.

• Win 7 Ultimate stuck on the windows form

  Hello world

  I close my laptop last night and booted up this morning only to discover that he's stuck on the windows form. The laptop computer to download updates and installed when I stopped. I need help just to get it to work properly.

  Thank you

  

  Hello

  Do a Safe Mode system restore, which takes back you to a time before the updates were installed.

  "In Windows 7 system restore:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  "The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. " You can access the menu by turning on your computer and pressing the F8 key before starting Windows (press F8 at the rate of about once per second)"

  @@@@@@@@@@@@@@@@@@@@@@

  If this does not it, follow this method:

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  "This will show you how to create a system repair disc Windows 7 to be able to use to start the system recovery options to help recover your Windows 7 installation, if you have not a Windows installation disk, can't find your Windows installation disc or can not access the recovery options provided by your computer manufacturer.

  A system repair disc is not able to install Windows 7.

  Note

  If you are unable to start your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  _____________________________________

  Then, use this disk for System Recovery Options:

  "System recovery options".

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  "How to run a startup repair in Windows 7"

  http://www.SevenForums.com/tutorials/681-startup-repair.html

  See you soon.