transparent glass

Similar Questions

• SEMI TRANSPARENT GLASS EFFECT BUTTON

  Hello

  I'm looking for any reflection on the contribution of a glass effect button semi transparent please.

  I've been playing with this for awhile in FW and still not get the look I'm after.

  I'm designing an arty site that has a lot of gray with large images. Rather than use words to nav around the site, that I want to use images, nothing new there and loads of time however did that on this site I would use a button transparent semi which is clear'ish and then changes color slightly when you click it.  I can make the mouseover in flash so that isn't the problem. I am not fan of buttons.

  In short;

  Someone has fun ideas for a glass button semi transparent which could be used to nav around a site?

  I also need to "tone" it with a color when mouse over.

  Thanks much for any help.

  I jumped 'Fireworks tutorial"in Google, because I know that Smashing Magazine has a nice overview (http://www.smashingmagazine.com/2009/07/27/tutorials-and-resources-for-adobe-fireworks/).

  You could read on these four tutorials and see if any of them have techniques you could use or adapt:

  http://Abduzeedo.com/James-white-o-series-Fireworks

  http://blog.blue2x.com/?p=61

  http://www.voidix.com/fireworks_gel_button.html

  http://qrayg.com/learn/Fireworks/jewelbutton/

• My MS 5000 Mouse will not work on glass? Any solution?

  I just bought the mouse and found that, after I've cleaned my desk top in glass that lists the mouse is no longer on the screen.  Someone has the fix for this?

  The glass is transparent?  Usually, transparent glass will leave the 'light' mouse / "laser" to get completely through.  It is not reflected back to the sensor so that the mouse / pilots cannot see that it has been moved.  You may need a mouse pad.  As test, place a single sheet of paper and try the mouse.  If the mouse seems to work, then you will need the key.

• Apply transparency to letters in Illustrator

  I am trying to apply transparency to the items in a logo I created. Right now, I had lettering on a layer above an opaque circle. I wish that the lettering to show through transparent rather than display them in the form of a separate color at bottom. It might help to think that the logo is an adhesive logo to be attached to a storefront window. Anything white on the logo must be cut and show through the transparent glass behind it.

  I tried to use a clipping mask, but the circle disappears, and its color is applied to the registration.

  Here is the logo. Help much appreciated.

  JCBOSCO,

  You can use a mask opacity as follows:

  (1) select the letters, which can be direct or outlined letters, grouped together if more than one object, as well as the object to make it transparent

  (2) in the transparency palette dialog box, click the unchecked with Clip opacity mask and invert the mask checked.

  If you want the two white circles on the sides and/or white central in parts too transparent, you can just group them with the letters (whish can still be live Type) while they are also selected in 1).

  You can release the opacity mask and change what you want, then reapply.

  Keep the text as a direct Type gives you the opportunity to change your mind on this matter without having to start over.

• How can have rounded corners and drop shadow a transparent stage?

  Hello
  
  It is in fact 2 questions:
  1 - How can it cause a stage transparent background corners?
  I tried to do this:
  .rootPane
  {
  -fx-border-radius: 4 4 4 4.
  -fx-background-RADIUS: 4 4 4 4.
  -fx-border-color: gray;
  -fx-border-style: solid;
  -fx-border-width: 1;
  -fx-background-image: url("resource/clean_textile.png");
  }
  And the root of the scene to have the style class '.rootPane '.
  
  But she sometimes shows some visual artifacts on the corners. I'm doing it wrong? is this a bug?
  
  2 - How a transparent stage can display the windows shadow effect windows 7? Is this possible?

  How a transparent stage can have substantive corners?

  Yes, it is a possible.

  There are a few tricks and you need of each of them:

  1 StageStyle must be transparent:

  new Stage(StageStyle.TRANSPARENT);
  

  2. fill stage must be as transparent:

  new Scene(root, Color.TRANSPARENT);
  

  3. the background color:

  -fx-background-color: derive(cadetblue, -20%); 
  

  4. you must apply the effect shadow in the background region.

  -fx-effect: dropshadow(three-pass-box, derive(cadetblue, -20%), 10, 0, 4, 4); 
  

  5. you will need embedded in the background in the region that has the dropshadow so her shadow will be visible in the scene and not cut out of the scene.

  -fx-background-insets: 12; 
  

  6. you must apply a RADIUS in the background of its rounded corners.

  -fx-background-radius: 6;
  

  Here is a sample in the revision of the gist =>
  https://gist.github.com/1887631/155d5e052b6ec7d0eaa6f825713f98f8e542152e

  How a transparent stage can display the windows shadow effect windows 7? Is this possible?

  You can kind of approximate using the techniques above, but I don't think that you will be able to get an exact match, without something like: http://javafx-jira.kenai.com/browse/RT-18936 "Enable aero transparent glass style" (and probably JavaFX platform additional support so) running.

• Windows 7 automatically switch to the basic theme (no aero). I need a way to disable this behavior.

  This is very similar to what is described here: http://support.microsoft.com/kb/939423
  And here: http://social.answers.microsoft.com/Forums/en-US/vistaperformance/thread/c7b869e1-5138-48a3-b09d-419f76e2f728

  However, it's for Windows 7, Vista.

  Scenario:
  On a 3 screen inches (1920 x 1080 each) Setup ran on an ATI HD4890 (1 GB of RAM, 2 screens running) + HD 3450 (256 MB RAM, 1 screen running), whenever anything graphic intensive is put on the HD3450-driven screen, Windows will complain "the color scheme has been changed in Windows Basic - the color scheme current has exceeded its allowed memory. then the color scheme has been changed automatically to improve performance. Click here to see more information. "and change my basic theme Windows.

  However, it is worth noting that the 3450 is not stressed at all (all the load is put on the 4890 according to GPU - Z).

  It shouldn't be a problem with the system (6 GB, on Win7 x 64) RAM or processing power (i7 920).

  Is there a way to disable Windows automatically "improving performance" by changing my theme?

  Hi whsper,

  Welcome to Microsoft Answers Community Forums.

  Basically, the aero theme is enabled according to the video card.

  Windows Display Driver Model is the architecture of graphic driver for video card drivers that are running versions of Microsoft Windows starting with Windows Vista.

  WDDM driver model version 1.0 is that it does not support multiple drivers in a configuration multi-adaptateur, multi-screen, the latest version is 2.0 is introduced.

  Windows disables the window manager of the Bureau (DWM) that controls the transparent glass effect or other effects of the Aero theme. The DWM manages the office and the main display settings in Windows.

  I suggest you to check with your manufacturer for the latest drivers support your hardware configuration.

  Hope this information helped you.

  Concerning

  ----------------------------------------------------------------------------------------

  Arona - Microsoft technical support engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 task bar icons stopped normal mouseover of the functions.

  Usually, when you mouse over or hover over the 'show desktop' without clicking, you should see the office with a visible transparent window frames. It has stopped working. Usually when you hover over the icon of internet explorer in the taskbar, you can see thumbnail pages of everything you have open. Now it produces a list of these pages display. I tried to look at the taskbar settings, but do not see how I could change these functions.

  Hello tomvaillencourt,

  Thank you for visiting the Microsoft answers community.

  Make sure that Aero Peek is activated in the taskbar:

  ·          Right click on the task bar > click Properties > check Use Aero Peek to preview the desktop > click OK

  Make sure that Aero Peek is activated in the performance Options:

  ·          Click on Start Orb > right click on computer > click Properties > click on Advanced system settings

  ·          Under performance, click settings

  Make sure that these are checked:

  ·          Activate Aero Peek

  ·          Activate the composition of the Bureau

  ·          Enable transparent glass

  Now, click OK in each window to complete this action.

  In addition, make sure you have a selected Aero theme:

  ·          Right-click on the desktop > click Customize

  ·          Select an Aero theme

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Missing drivers after new OS installed.

  Hello, my nameis Tyler.

  So my old hard drive in my Toshiba Satellite C675 decided to die on me. I bought a new hard drive and a new windows 7 Home premium OS to new hard drive empty. After installing the operating system on the new drive hard it wouldn't let me updat because I'm not connecetd to the internet.  Trying to connect to my network, I get the messgae of error 'install a driver for your network adapter' so I click Next and the following error that says "windows can't find a driver for your network adapter" so in short I can't install the drivers becausi can not get my computer connected to the internet. I can't get my computer connected to the internet, because I need to install the drivers. Any help would be greatly appreciated.

  I tried calling the support number microsoft product, but the guy gave me the run around trying to sell me a CD pack for $ 200, and then to buy a service that would supposedly help me with my problem. He wouldn't even give me his name.

  Also, you will need to click 'Start' , 'system' type, click System in the list. In the left pane, click on "advanced system settings" , click the "Advanced" tab in the performance box, click settings, click on the 'Visual effects' tab make sure that the boxes "Enable aero peek" and "enable transparent glass" are checked.

• Rigging question

  Hello!  First of all, the program is awesome and I can see tons of potential here!  I just started to play with her and watch the videos.  I apologize if this is covered everywhere and I'm still not there, but I can't find how to make layers of items that are not in the default templates.  For example, here's my character that I did and I try to configure for ch.

  

  I glued the eyes and head back into the layers of the appropriate model.  I added the point of origin for the neck and so far, so good.  Students move with the head, according to the original pivot point and they don't deform or anything like that.  -A quick question here - how to define to what extent students can move in this investment?  Can I remember how they shift character as I move my eyes on the camera?  As a control of tolerance or the setting of the movement?  This is perhaps related to the size of the eyeball?  I left those.

  Okay, back to the main question.  Then head and the eyes move based on the origin and don't deform when moving them.

  

  Now I wanted to add a few layers of group head above the eyes and face saving.  I would like to add lines on eyes, the façade, the dome of glass, etc.  I create layers and dropped, as follows:

  

  I guess since they are in the leading group that they would move related to other items, however, they shift and warp, strangely, as follows:

  

  The lines remain with the façade, which is good, but the lines and front independent rotation of the eyes and face back and then start to deform from the point of origin and great stretch if I, the puppeteer, closer, or farther from the camera.  How to make them all move together and not string?  Also, I noticed that some photoshop layer effects didn't import, like having a layer set as 'Overlay' transparency.  Is it possible to define in Ch or not yet?  I wish that the lines to fix to overlay the eyes.  I also need the transparent glass dome.

  Sorry for dropping a ton here!  If there is a tutorial or something that already explains this, I would be happy to follow the link!  Great program even once, I can't wait to understand better!

  > How to make them for all move them around together and not string?

  To get a bunch of things to move together, place them in the same group at PS. Make sure that the group is set to deform independently (i.e. ' + ' before the name of the PS Group, or check the Warp option independently in Ch when that group is selected) and make sure that the things inside the group are not be moved in directions different (or moved at all). For example if right eyebrow and left eyebrow were in this group, they would warp things in the group as you move your eyebrows. If only one thing is moved (as a handle from the head, for example), then the Group should move as one. But you can also have groups within your group and have their value chain regardless of having them akin to the group but does not deform it. This is a common way to have eyebrows - they move with the head, but also independently floating above it. Each group set to deform independently can also specify handle in its parent, it must join (popup under Warp regardless).

  > Also, I noticed that some photoshop layer effects didn't import, like having a layer set as 'Overlay' transparency.  Is it possible to define in Ch or not yet?

  Ch does not yet support all PS layer options. Hearing from you which are the most important help us prioritize.

• Cinema 4 d Lite rendering error

  While trying to restore a scene in the aftermath I created in cinema 4 d with a bar (bear in mind, the bars have a lot of liquid and transparent glass in them) I get the "cannot write the file' make mistake. in cinema 4 d lite in my rendering settings, when I turn off transparency, refraction, reflection and shadows, make it work. What should I do in order to make legacy and keep all my transparency, refraction, reflection and shadow detail?

  

  Rendering of a sequence of images. Your Quicktime connection is time simply because it takes too long to render a frame. No never serious 3D artist would make formats clip directly, in any case.

  Mylenium

• Any ideas on how to improve this text?

  Hello

  A semi transparent, glass looking for globe with SG letter is attached. I intend to use it on a website and I was wondering if anyone knows a way to make the text look like it sank in the world? Or better said, so that the text doesn't look like it's flat, it seems most urgent in the face of the Earth.

  Hope I explained this right ;-)

  Any thoughts greatly appreciated.

  P

  Use the menu filters and try to bevel and Emboss > Inset and play with the settings. Ohotoshop filters can be used as well. Filters menu in the property inspector. The cool thing is that they can be changed. Of course, ungrop text first tjen select and apply filter.

• Addition of glasses: is Possible to transparency?

  I'm a puppet creating in Illustrator and added glasses, but when I slide to CA transparency of 40% of the lens become opaque. Transparency is simply not yet supported? Thank you!

  

  Awesome looking character! It is supported, but you must choose "Make like image" in the properties of transparency at work currently. It will be by default in the next version so you won't have to worry about this, but for now, this is unfortunately a manual process.

  

• cracked glass image with transparency (alpha) for overlay?

  All knowledge of a file PNG image good glass cracked including transparency (alpha) is I could use?

  The idea is that it could be placed above other images so you could still see the pictures back, but it would be like they are behind the cracked glass.

  Otherwise, if not directly, there are images that match this requirement, so how would easily transform a picture of glass cracked an alpha/transparency?

  1. Desaturate the layer of glass.

  2. make two copies of the glass layer, desaturated. Disable all three eye visibility for these layers in the layers palette.

  3. turn on the first glass desaturated layer by clicking on the eye in the layers palette. First glass desaturated layer place (an image directly above) in blend mode screen. 100% opacity. If the glass has a hole, use a layer mask or erase to drill a hole in the desaturated layer. The levels command to set up the glass so to taste... use push black cursor Grays to black and use the middle gray slider in the dialog control to transition between black and white. You can also set the white slider if you wish. Note: If you have added a layer mask, click the desaturated picture glass to ensure that you use the command levels on the image, not the mask.  (Tip: shortcut on PC for levels is Ctrl + L on Mac Cmd + l.)

  Note: If you need a hole in the picture, it is easier in Normal blending mode. 100% opacity. Use the Quick Selection tool if you have a version of items that includes this tool. If you have an older version of elements before the introduction of this tool, the wand should also do the trick.

  Note: If you punched a hole in the glass, save this selection, so you can reuse it. Select

  Just go to step #4 If you punched a hole in your glass.

  4. go in the first copy of desaturated glass (one directly on the one you made to step #3... you should have one above it) and turn on his eyes the visibility in the layers palette.  As previously, the value this screen blend mode layer: 100% opacity. Hide or delete so this layer effect will be limited at the edge of the hole and some of the glass around the edge. Use the levels command to adjust the contrast around the hole. You should concentrate on the white slider and the edges medium gray to make the hole look correct.

  Note: To make it easy on myself, I have used Select

  5. Optional: go to the latest copy of desaturated glass (this must be on top of your pile of palette layers.) and turn on the eye of this layer. Change the blending mode of this layer to soft light blending mode and adjust the opacity to your liking.

  
  Above shows my layers using Photoshop. In the elements, layers will be the same, although your UI will be different. If you have PSE 9, you can use layer masks as I... see PSE9 layer mask video link I linked below.

  http://www.Photoshopelementsuser.com/featured/elements-9-easy-layer-masks/

  If you don't have a PES 9, you can either use the eraser to delete what you don't need or use a clipping mask or clipping group. (Same thing another name.) PSE 8 and 9 PES call it a clipping mask while all older versions of elements called it a clipping group.

  See the tutorial below if you need a tutorial on clipping mask/clipping group.

  http://www.photokaboom.com/photography/learn/Photoshop_Elements/layers/layer_groups_clippi ng_masks/1_layer_groups_clipping_masks.htm

  Another method:

  You can also use Photoshop brushes and little white paint. Search for brushes that are high resolution, pixel large size... like the smaller brush sizes will be blurred if you have their measure. These brushes can usually be found using broken, break, broken, broken or cracked in the search term. These two are beautiful high resolution sets:

  http://archaii.deviantart.com/art/shatter-glass-brushes-82308115

  and

  http://archaii.deviantart.com/art/shatter-v2-new-101049266

  Several other series are out there on the net at this site and others. This set has attracted my attention like beautiful brushes appearance and are big brushes. (Brushes of mind may not be more than 2500 px in height or width if you do brush of your own images. Brushes, which are small get blurred when the brush tip size increases then trying to make them bigger. This is why I suggest that you are looking for brushes large high resolution at first.

• Why windows transparent like glass and the corners feature borders rounded abducted?

  I love the borders of beautiful windows, I had in Windows Vista and Windows 7! Why are they passes?

  In fact, I think that the layout in Vista is prefect but in 7 is always nice. However, I cannot accept the edges of solid windows and rectangular corners in Windows 8! >/\

  I know there is a method to make windows completely transparent borders, but what I want is sth. I had in Windows Vista or Windows 7!

  Can someone please give me a good reason why the nice feature is gone or can the development team please add it back?

  Thank you.

  He used the resources for little other return he seemed well.

  The new look means a clean, clear image, in line with the new tile interface and is generally less intensive than Aero. It gives laptops and desktops with built-in video a better chance of getting the stuff to the user upwards on the screen...

• Tasks under glass? I know I'm not the only one...

  

  I just buy my Apple Watch 30/03/16 and today I noticed these green spots under the glass and they weren't there yesterday? I did not get the wet watch and it works fine. I have reduced transparency and makes the stains disappear. I'm the only one who thinks it's ok or acceptable? Why should I have to disable the option installed by apple to make the sleep function properly? I did some research and see that I'm not the only one that this has happened? Do I have to send the watch back for a new or what is happening for all watches Apple? I really like the watch I was wondering what everyone else thought?

  Hello

  It's perfectly normal - it is not a problem or an error.

  You are referring to an intentional visual effect that is designed to repeat the contents of the underlying screen.

  The effect appears every time that see you some screens that sit on top of the other, for example:

  -For displaying Notification Center (dragging down when you view the screen of the watch face);

  -For reading a notification;

  -For the opening of eyes (by sliding upward when you view the screen of the watch face).

  -By the use of Siri.

  The underlying mirror not precisely the content of the display function. Instead, it adds a blur effect / ghosts. It can serve as a subtle, useful reminder that you are viewing - for example - looks or Notification Center, each of which can be exited by sliding downwards or upwards on the screen.

  If you want to disable this feature:

  -On your iPhone in the app shows, go to: Watch My > general > accessibility - turn on / enable the setting to reduce transparency.

  This setting stops the effect to be shown on the display of your watch.