Treo 680 line loops after update 1.12

Similar Questions

• Problem in reboot loop after updates.

  I have windows XP on an Asus A8V-E-SE motherboard has developed a problem in reboot loop after updates.  It will not go in safe mode either.  Stop at a display of the driver.  I used the recovery console using the XP cd and you can see the update directories in the systemroot folder.  I followed the instructions in the forum to uninstall every update by accessing commands back to the subdirectory spuninst update and then run "Batch spuninst.txt.  I get a bunch of 'access denied' messages for each of them (varies in amount of "access denied" messages by everyone but consistent for each.)  It's not like the batch uninstall for the update does not work.  I tried to uninstall all updates yesterday 10/02/10 (I had 10) even with the "access denied" messages, but it still will not initialize properly.  No way to move the access denied message?

  See the RESPONSE (by Kevin Hau) message in this thread: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Vista stuck in update 3 of 3 loop after updates.

  updated the title: Can not boot Vista after updates

  I'm stuck in the update 3 of 3 loop and cannot restore my system by using the system restore or the Vista CD... Can anyone help? Y at - it a solution or should I reinstall?  thanksRemember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi royfos,

  Do you have a code error message when you try to run the system restore?

  Check if you can get into safe mode. If you manage to get into safe mode, then you can run the restore of the system from there. Otherwise, another option is to perform the Startup Repair.

  Method 1: Troubleshooting Safe Mode

  Step 1: Start the computer in safe mode

  Safe mode is an option of troubleshooting for Windows that starts your computer with only basic services and features.

  To get into safe mode, check out this help article: , start your computer in safe mode

   

  Step 2: Run system restore

   

  For complete help, see this article:System Restore: frequently asked questions

  Note: If you use system restore when the computer is in safe mode, you can not undo the restore operation. However, you can run System Restore again and choose a different restore point if any.

  Method 2: Startup Repair

   

  Startup Repair is a Windows Vista recovery tool analysis of missing or damaged system files that may prevent Windows from starting correctly. Run it and see if that fixes the boot problem.

  Reference:

   

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

   

  Also take a look at this article to learn more.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unlocked GSM Treo 680 update 1.12 - cannot run

  I can't get the unlocked GSM Treo 680 update 1.12 to work at all.

  I'm depending on environment which extracted with what Palm should work:

  -Windows family XP SP3

  -Treo680 - 1.04 - LINE is a current software on my Treo 680 unlocked GSM

  -Enough of RAM, more than 26MB req

  Œuvres-HotSync

  -J' have Zonealarm firewall/anitvirus

  -J' downloaded and saved the file 'Treo680_1_12_ROW_desktopupdater' on my C drive

  -J' I Executed "Treo680_1_12_ROW_desktopupdater.exe" to extract the files

  -Msg saying Turbo SFX Extraction...

  -Security WARNING asking if I want to run index.hta, I chose run option (vs save or cancel)

  -A encountered an error: "an error has occurred.  You want to debug?  "Line 21 error: the system cannot find the file specified."

  -J' chose debug to see what it was.  Line 21 States ' varoExec = wshell.run (app_to_run1);  It is impossible to continue, if I skip this line and go to line 22 to continue that I get a screen with an HTML error and a few buttons not specified.  It is impossible to continue beyond that point.

  What is going on?

  What should I do?

  Thank you

  Palm SUpport pages where you got the 680 update, there is also an option to pick a single method of installation SD, I think?

  http://www.Palm.com/us/support/downloads/treo680update/unlockedgsm_installsd.html

  It's "alternative" I was talking about.

  Message is about: Treo 680 (unlocked GSM)

• Treo 680 headphones causes hotsync loop

  I have a Palm Treo 680 unlocked working well until a few days ago. While listening to music with pctunes and attached headphones, pctunes locked up and hot sync began in a loop.

  I searched the forum and tried the following to resolve the problem:

  1 soft reset, too many times to count!

  2 clean the contacts for the hotsync cable, with compressed air, then friction alcholol and q-tips.

  3. hard reset a few times first sync after resetting and finally do not sync.

  All to nothing does not. Then I discovered that if I replace the headset it starts randomly hotsync loop. This leads me to believe that the problem lies in the socket for headphones rather than contacts hotsync. I can't find anything on this in the forum. Here's what happens:

  If I insert and remove the helmet a couple of times, start hotsync. Of course, it cannot synchronize because it is not connected to the computer. Sometimes, after that, it will allow normal operation of the buttons, but most of the time, it freezes the screen on the hotsync with no way to get to any other functions of the phone. Because of this problem with the headphone jack, I think I'm dealing with a hardware problem and not software, but I could be wrong.

  With the current hard reset I didn't do a resync with my computer, it should be all the factory without software component programs snap-in settings. I currently don't have the AT & T sim card in because the phone is unusable in this condition. I am using an old Blackberry that I hate!

  I will be grateful for any help or advice anyone can offer.

  There may be a problem with the microphone in the earpiece. Click on the following link for article Palm on this issue.

  http://www.Palm.com/cgi-bin/cso_kbURL.cgi?id=40427

  This usually causes the headset to fail, but it may help to solve your problem.

  I would say to remove the battery and wait at least 1 minute to lower the power of the Treo. Take some alcohol to friction and cushion the plug on the headphones. Connect the headset and turn it several times and also delete and re - insert the plug several times.

  If this does not resolve the problem, the Treo will need to be repaired.

  For reference purposes, click the following link to the support page for your device on the kb.palm.com Web page.
  http://KB.Palm.com/wps/portal/KB/na/Treo/680/unlocked/home/page_en.html

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

• black lines after updating album app

  Hello.

  I use sony experia c, after release of the album, I have a problem with black lines appear on the images. so I uninstall the updates. now his good work. but I liked the album after update. So I want to use it. Correct the problem and give the solution to use the new album.

  Thank you!

  Have you tired reinstalling the update and clear cache and the data of the application through settings Apps then all find and open the Album and tap clear cache and data

• Treo 680 software update question

  I just had a Cingular Treo 680 UNLOCKED. I'll use it in Canada with Fido. If I apply the 2.11 update, it re - lock the phone? If so, can I just get the 680 camera update (January 2007), DST update (February 2007) and Treo 680 software update 1.09 (May 2007) separately? If not, don't use the update from AT & T or the 'unlocked' Update 1.12_ROW? Thank you.

  In fact, I was worried that it would be re-locked to AT & T during the upgrade, but it didn't happen. The phone is now upgraded and works pretty well (except that Bluetooth does not work with my hands-free speaker, but that's another story...). Treats to consider...

• Life after the Treo 680 - Ive had enough of Palm

  Ive had enough of Palm Im afraid.

  I started life with a Palm V and Vx then the Zire.

  Because my Palm Desktop so critical has information about my clients, I bought a Treo 680.

  Now, its keyboard is not working, I can't even turn on the guy - I have to reinsert the battery to get the screen to light.

  The touch screen still works, but it's useless cause, you can't do anything - like making a telephone call.

  Ive had to put the SIM in an old I - mate Jasjam - hate this phone and of course no information contact to my fingers.

  I bought the Treo 680 cause it sync has all my Palm Desktop but after only 6 months his stuffed animal.

  Where should I go now?

  Can I export all my contacts from Palm Desktop to Outlook?  I cringe at the idea of using the Windows Mobile operating system.

  Open to suggestions... Thank you from down under.

  Download and run the program called "Hard Reset" on this page:

  http://www.palmpowerups.com/downloads.php?cat_id=2

  He'll make an immediate hard reset on your device.

  WyreNut

  Message relates to: Centro (AT & T)

• Unlocked (Rogers) Treo 680 problem: no network after upgrade to 1.12

  Here's what I did:

  1. Bought Rogers GSM Treo 680 on Ebay and inserted my T-Mobile SIM card.
  2. Purchased and applied unlock code.
  3. Used Treo 680 on T-Mobile (USA) successfully for 7 months.  Everything worked well.
  4. Recently upgraded to the version of the firmware 1.12 with Palm download "unlocked."  (Probably a mistake... I thought since I had unlocked the phone, I use this upgrade Unlocked.)   Now the phone would not connect to T-Mobile more.
  5. Redid the upgrade to Rogers 1.12 upgrade.   Not connect to T-Mobile.
  6. I couldn't find my unlock code, so spending $25 on a new unlock code.  It is entered, reboot, still not connect to T-Mobile.

  Note: I see T-Mobile and ATT in my list of "Network Selection".  He always responds with "cannot save with network selected."

  What should I do now?

  FYI, some of my info phone, if it's important:

  Firmware: R01.92

  Software: Treo680 - 1.12 - ROW

  CC - Cap: ROG-ROG-015

  Carrier DB: 549

  Material: has

  Solution: It turns out that my year of 7-8 old SIM card has gone wrong (or has been altered) during the upgrade process. T - Mobile Support new authorized pocket card free SIM - I picked up in a downtown Seattle T-Mobile store.

• Problem with the software. Treo 680. Help, please

  Hello. I am of the Republic - a country of Eastern Europe. I have a friend in the United States and he send 2 weeks ago, a mobile - unlocked Palm Treo 680. Maybe in Moldova is this Treo 680 is the only mobile Palm they are not popular in our country, no one has seen before this mobile. When I received it I try to install in many programs, games, utilities... Before installing different programs, it is Treo680 - 1.12 - ROW. but he is now -/13/R01.92- (glance at the screen) [URL =http://img196.imageshack.us/i/p9303898.jpg/] [IMG]http://img196.imageshack.us/img196/3710/p9303898.jpg[line] [url]

  It doesn't work so well that before, are numerous shifts. I tried to reinstall the update of 1, 12-LINE, but I can't. Please help me... What can I do now?

  Where do you have the ROM update file? I have not seen a RO1.92 update. What is a hacked ROM update? The phone has been hacked?

  Here is the link for the update for the Treo 680 unlocked using a memory card to install. The link of update synchronization does not work right now.

  http://KB.Palm.com/wps/portal/KB/na/Treo/680/unlocked/solutions/article/10837_en.html

  This is the page you got the download from?

  I see that there is no serial number in your screen shot, which is not normal.

  You can try a hard reset to fix the problem. The hard reset will erase all data on the device. Make sure that synchronize you with PC to back up your data.

  Click on the following link for the Web page of kb.palm.com for the article about reset procedures

  http://www.Palm.com/cgi-bin/cso_kbURL.cgi?id=887

  When you update the ROM, you cannot revert to a previous version. That ususlly results in a 'brick' phone

  For reference purposes, click the following link to the support page for your device on the kb.palm.com Web page.
  http://KB.Palm.com/wps/portal/KB/na/Treo/680/unlocked/home/page_en.html

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

• Release of stored procedure after UPDATE

  Hello
  I've written a LOOP that calls a second stored procedure.
  In the second stored procedure, I have 3 INSERTS the values of each SELECT limited with a WHERE clause.
  
  Example:
  

  begin
  
  dynsql:=INSERT INTO destinationtable (ID,DATE,NAME)
  SELECT src.ID,src.DATE, dest.NAME FROM sourcetable src INNER JOIN destinationtable dest ON dest.ID=src.ID WHERE dest.date between '01.JAN.2012 and '03.JAN.2012' --if not condition not met, no insert
  execute immediate dynsql;
  dynsql:=UPDATE destinationtable SET DATE = dest.DATE FROM sourcetable src INNER JOIN destinationtable dest ON dest.ID=src.ID WHERE dest.date between '01.JAN.2012 and '03.JAN.2012'
  execute immediate dynsql;
  
  
  dynsql:=INSERT INTO destinationtable (ID,DATE,NAME)
  SELECT src.ID,src.DATE, dest.NAME FROM sourcetable src INNER JOIN destinationtable dest ON dest.ID=src.ID WHERE dest.date between '01.APR.2012 and '01.MAY.2012'  --if not condition not met, no insert
  execute immediate dynsql
  dynsql:=UPDATE destinationtable SET DATE = dest.DATE FROM sourcetable src INNER JOIN destinationtable dest ON dest.ID=src.ID WHERE dest.date between '01.APR.2012 and '01.MAY.2012'
  execute immediate dynsql;
  
  
  dynsql:=INSERT INTO destinationtable (ID,DATE,NAME)
  SELECT src.ID,src.DATE, dest.NAME FROM sourcetable src INNER JOIN destinationtable dest ON dest.ID=src.ID WHERE dest.date between '01.JUN.2012 and '01.JUL.2012'  --if not condition not met, no insert
  execute immediate dynsql;
  dynsql:=UPDATE destinationtable SET DATE = dest.DATE FROM sourcetable src INNER JOIN destinationtable dest ON dest.ID=src.ID WHERE dest.date between  '01.JUN.2012 and '01.JUL.2012'
  execute immediate dynsql;
  
  end;
  
  
  
  commit;

  What should I do?
  I update the existing line of 'old' with a new date, and then I'm basically duplicate this line but add a new DATE, the NAME and the ID is 'copied' as it is.
  The big problem is that the lines of recursive updates. If the first statement updates a date, it could become a 'true' conditions for the second and the first update
  That is not what I want. Initially, only one of the instructions is true, never. The problem with my code, is that after the first update and the setting of the date, the other "could" become reality.
  This should stop. After the update has occurred, I need to stop the stored procedure.
  
  How can I stop put an after?

  Use sql % rowcount after an immediate execution.

  If sql % rowcount = 0, no line have been set to day/insert/selected.
  If sql % rowcount > 0 then lines have been updated/inserted/selected day.

• Problem of GPS location after updating to IOS 10

  Anyone have problems with GPS location problem after update from IOS10?

  I drove Baltimore DC Regan airport, I tried with apple and Google map yesterday map, location was far from the highway, he could not determine where we are, we were on the road, but he kept us showing that we were on a local road to the highway.  Could not find 90% of time on my road.  Finally, I have to use my phone to brother with IOS9, we were fortunate that it has not updated to the most recent IOS 10.

  I wonder if anyone has the same problem after the update.

  Hello yinchiu85,

  I understand that your iPhone seems to have a hard time determining its location precisely. Fortunately, there are a number of steps you can take to help improve the accuracy of the information.
  

  Improve the accuracy of GPS

  GPS accuracy depends on the number of visible GPS satellites. Location of all visible satellites can take several minutes, with accuracy gradually increasing over time. To improve the accuracy of the GPS:

  • Make sure that you set the date, time and timezone correctly on the device in settings > general > Date & time. If possible, use the value automatically.
  • Keep a clear vision in several directions. Walls, vehicle roofs, buildings of great height, mountains and other obstacles can block the line of sight to GPS satellites. In this case, your device uses Wi - Fi or cellular networks to determine your position until the GPS satellites are still visible.

  If your iPhone is still unable to pinpoint your position, the next step would be to restore location Services.
  

  If you want to reset all settings to factory default location, go to settings > general > reset and tap reset card and privacy. When your location and privacy settings are reset, apps will be stop using your location until you grant them permission.

  On privacy and location in iOS Services 8 and later versions
  https://support.Apple.com/en-us/HT203033

• My Macbook Pro does'nt connect after update to 10.11.6

  Hi all.

  After update from my Macbook Pro to 10.11.6 he starts, but after entering my password, then pressing enter shows the loading animation and it is.  I let him go lastnight believe he worked at something after the update, but this morning, nothing...

  An advise, please.

  Kind regards

  Fabio

  Please take each of these steps that you have not already tried it. Some of them are not applicable to your model or your situation. Stop when the problem is resolved.

  To restart a computer is not responding, press and hold the power button for a few seconds until the unit turns off, then release, wait a few seconds and press again briefly.

  Step 1

  The first step to respond to a startup failure is to secure data. If you want to keep the contents of the boot drive and you have not already at least a current backup, you should try to back up now, before we do anything else. It may or may not be possible. If you don't care the data changed since the last backup, you can skip this step.

  There are several ways to back up a Mac that is unable to boot. You need an external hard drive to store backup data.

  a. starting the partition recovery or an hour Local Machine backup volume (button option key at startup). When the OS X Utilities appears, launch disk utility and follow the instructions in this article to support. You'll be 'restoration' the boot on the backup volume volume.

  If you use 2 FileVault, you must first unlock the boot volume. Select its icon ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu. When you are prompted, enter your login password.

  (b) If step 1 fails due to disk errors, and no other Mac is available, then you may be able to save some of your files by copying them in the Finder. If you already have an external hard drive with OS X installed, the start of it. Otherwise, if you have access to the Internet, follow the instructions on this page to prepare the external hard drive and install OS X on it. You will use the installation program of recovery, rather than download it from the App Store.

  c. If you have access to a Mac, and it work and have both the non-working Mac FireWire ports or stroke, start the Mac non-working in target disk mode. Work Mac to copy the data to another drive. This technique will not work with USB, Ethernet, Wi - Fi or Bluetooth.

  d. If the internal drive of the non-working Mac is replaceable by the user, remove it and climb into a docking station that is pregnant or an external drive. Use another Mac to copy the data.

  Step 2

  If you have booted from an external drive, make sure that the internal boot volume is selected in the pane of the system preferences Startup disk.

  Start in safe mode. Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. If you do not see the words "Safe Boot" in the start screen, you did not start in safe mode. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, and some things don't work at all, including the networks without wire on some Macs.

  The login screen is displayed even if you normally connect automatically. You must know the password for the connection to connect. If you have forgotten the password, you will have to reset it before you begin.

  If the startup progress bar gets stuck for more than a few minutes, or the system stops automatically when the progress bar appears, the boot volume is corrupted and the player is probably defective. In this case, go to step 9. If you have another problem with the player, replace it immediately.

  If you can start and log in in safe mode, empty the trash and then open the window of info on the boot volume ("Macintosh HD", unless you have given it a different name.) Make sure you have at least 9 GB of space available, as shown in the window. If you do not, copy as many files as necessary on another volume (not another folder on the same volume) and delete the originals. Deletion is not complete until you empty the trash again. This, until the space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)

  If the boot process hangs again, the problem is probably caused by third-party software you have installed. Ask for additional instructions.

  Step 3

  If the startup process stops at a gray screen together with a mobile cursor, then the logon dialog box may be active but not visible because of a bug. You may be able to connect by using the arrow keys or the cursor to select the password field and type your password as usual.

  Step 4

  Case of failure of step 3, the boot volume can be complete. If you saw previously implemented guard space drive is low, it is certainly the case. You might be able to start in safe mode , even if you cannot boot normally. Otherwise, boot from an external hard drive, or well technology for step 1b, 1 c or 1 d allows to mount the internal drive and delete some files. According to the documentation from Apple, you need at least 9 GB of free space on the boot (as shown in the Infolog) for normal operation volume.

  Step 5

  If a Mac desktop (without the built-in keyboard) crashes on a gray screen together with a mobile cursor, the keyboard may not be recognized. Hold down the button on the side of a wireless Apple keyboard to make it discoverable. If need be, replace or recharge the batteries. If you use a USB keyboard connected to a hub, connect it to a built-in port.

  Step 6

  Sometimes, a startup failure can be solved by resetting the NVRAM.

  Step 7

  If there is an integrated optical drive, a disk may be stuck in there. Follow these instructions to remove it.

  Step 8

  Press and hold the power button until the unit turns off. Disconnect all devices wired except those needed to start and remove all aftermarket expansion cards. Use another keyboard and/or mouse, if these devices are wired. If you can start now, one of the devices that you disconnected, or a combination of both, the origin of the problem. Discover that it is a process of elimination.

  Step 9

  Launch the utility disk in recovery mode (see step 1). Select the boot volume, and then run the repair disk. If problems are found, repeat until that clear. If disk utility reports that the volume is not repairable, the drive is defective and must be replaced. You can choose to tolerate such malfunction in the reader's life. In this case, delete the volume and restore it from a backup. If the same thing happens again, replace the drive immediately.

  It is one of the rare situations where you must also run repair permissions, ignoring the erroneous warnings, that it can produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.

  Step 10

  If the boot device is an aftermarket SSD, it may have an update and/or a forced "garbage collection". Instructions how to do this with a Crucial SSD of brand have been posted here. Some of these instructions may apply to other brands of SSDS, but you should check with the technical support of the provider.

  Step 11

  Reinstall the OS. If the Mac has upgraded an earlier version of Mac OS X, you need the Apple ID and password used to upgrade.

  Step 12

  Do as in step 11, but this time clear the disk utility boot volume before installing. The system should automatically restart in The Migration Wizard. Follow the prompts to transfer data from one Time Machine or another backup.

  Step 13

  This step applies only to models that have a battery logic-board ("PRAM"): all of the Mac Pro, MacBook with a removable main battery and a few others (models not updated). A flat battery logic-board may cause a boot failure. In general the failure will be preceded by the loss of the system and boot disk clock settings. Refer to the user manual for replacement instructions. You may need to take the machine to a provider of services to have to replace the battery.

  Step 14

  If you get this far, you probably deal a hardware failure. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• Location (GPS) service no longer works after update of Os 9.3.2

  My GPS service does not work after update os on IPHONE 6 64 GB. Deleted, hard reboot as well os re - load os, I did, but still unresolved question and google Mao or Apple card does not. It seems that many Iphone user have the same problem after the Os update to 9.3.2.

  My wife also have the same model and updated to Os, but its Google map works perfectly. have online search of dome on the solution, but no luck.

  How to solve this problem?

  Hello, jayantg,

  Thank you for using communities of Apple Support.

  I see that your GPS service stopped working after the update to iOS 9.3.2. I use location Services on my iPhone, so I know how much it is important that we get this problem is solved. I have something I want you to try.

  Job to the subject of privacy and location Servicesand ensure that the location service is enabled and learn how the precision of GPS to improve, in particular, these two sections:

  Enable or disable location Services

  You can enable or disable location Services in settings > privacy > location Services. You can enable location-based Services during the wizard process of installation or later through the creation of location-based Services. You can individually control applications and system services have access to the data of location Services. When location Services are disabled, the apps can't use your position in the foreground or background. You will thus limit the performance of various Apple and third-party applications.

  

  Settings > privacy > location Services.

  

  Settings > privacy > location Services > System Services.

  Improve the accuracy of GPS

  GPS accuracy varies according to the number of visible GPS satellites. Location of all visible satellites can take several minutes, with accuracy gradually increasing over time. Follow these tips to improve the accuracy of the GPS:

  • Make sure that you set the date, time and timezone correctly on the device in settings > general > Date & time. If possible, use the value automatically.
    Important: Incorrect settings on your computer can sync to your device. Check the date, time and time zone on a computer that syncs with your device.
  • Restart your device.
  • Make sure you have a cell phone or Wi - Fi network connection. This allows assisted GPS (A - GPS) on the device to locate the fastest visible GPS satellites, in addition to providing information about the initial location using Wi - Fi or cellular networks.
    Microcells (sometimes called Femtocells) are not supported with location Services.
  • Keep a clear view of the horizon in several directions. Please keep in mind that walls, vehicle roofs, tall buildings, mountains and other obstacles can block the line of sight to GPS satellites. When this occurs, your device will automatically use a Wi - Fi or cellular networks to determine your position until the GPS satellites are still visible.

  All the best.

• Mac pro hangs at startup after update to El Capitan

  TTITLE says it all.  Computer works only in start mode course now.  Was able to download and run EtreCheck in secure boot mode.  Results below.  Results of the last log less than kernel panic.  Can anyone help?

  EtreCheck version: 2.9.12 (265)

  Report generated 2016-06-29 12:38:32

  Download https://etrecheck.com EtreCheck

  Time 02:08

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click the [details] links for more information on this line.

  Problem: The computer is restarted

  Description:

  Kernel panic causing the system to crash after update to El Capitan

  Hardware information: ⓘ

  Mac Pro (end 2013)

  [Technical details] - [User Guide] - [warranty & Service]

  Mac Pro - model: MacPro6, 1

  1 3.5 GHz 6-Core Intel Xeon CPU E5: 6 strands

  16 GB expandable RAM - [Instructions]

  DIMM1

  ok 4 GB ECC DDR3 1866 MHz

  DIMM2

  ok 4 GB ECC DDR3 1866 MHz

  DIMM3

  ok 4 GB ECC DDR3 1866 MHz

  DIMM4

  ok 4 GB ECC DDR3 1866 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en2: 802.11 a/b/g/n/ac

  Video information: ⓘ

  AMD over-pants D500 - VRAM: 3072 MB

  AMD over-pants D500 - VRAM: 3072 MB

  PA271W 2560 x 1440 @ 60 Hz

  System software: ⓘ

  OS X El Capitan 10.11.5 (15F34) - since startup time: less than an hour

  Disk information: ⓘ

  APPLE SSD SM0512F Disk0: (500,28 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 499,42 go-go (345,03 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  USB information: ⓘ

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Hub keyboard Apple, Inc.

  HP HP wireless KB and MS

  Apple Inc. Apple Keyboard

  FireWire information: ⓘ

  G-TECH G-DRIVE 400mbit - 800 max

  EFI (disk1s1) < not mounted >: 210 MB

  Backup of Volumes/NeonBunny NeonBunny Backup (disk1s2): 1.00 TB (187,87 GB free)

  Office backup HD (disk1s3) Volumes/Desktop HD backup: 999,72 go-go (406,82 free)

  G-TECH OEM ATA Device 00 800-800 max

  EFI (disk2s1) < not mounted >: 210 MB

  Time Machine (disk2s2) Volumes/Time Machine: 1,00 TB (562,63 GB free)

  Desktop Hard Drive (disk2s3) Volumes/Desktop Hard Drive: 999,52 go-go (406,55 free)

  Information crush: ⓘ

  Apple Inc. Thunderbolt_bus_2.

  Apple Inc. Thunderbolt_bus_1.

  Thunderbolt of Apple Inc. to FireWire adapter

  Apple Inc. Thunderbolt_bus_0.

  Configuration files: ⓘ

  / etc/hosts - Count: 22

  Goalkeeper: ⓘ

  Mac App Store and identified developers

  Kernel Extensions: ⓘ

  / Library/Extensions

  [no charge] jp.co.pioneer.driver.DJM - 900nexusAudio (1.4.0 - SDK 10.10 - 2016-06-25) [Support]

  [no charge] jp.co.roland.RDUSB017CDev (1.0.0 - SDK 10.9-2016-06-25) [Support]

  / System/Library/Extensions

  com.nvidia.CUDA [no charge] (1.1.0 - 2016-06-25) [Support]

  com.paceap.kext.pacesupport.master [no charge] (5.9 - 10.6 SDK - 2016-06-25) [Support]

  /System/Library/Extensions/PACESupportFamily.kext/contents/plugins

  com.paceap.kext.pacesupport.Leopard [no charge] (5.9 - 10.4 SDK - 2012-07-11) [Support]

  [no charge] com.paceap.kext.pacesupport.Panther (5.9 - SDK 10.-1-2012-07-11) [Support]

  com.paceap.kext.pacesupport.snowleopard [no charge] (5.9 - 10.6 SDK - 2012-07-11) [Support]

  com.paceap.kext.pacesupport.Tiger [no charge] (5.9 - 10.4 SDK - 2012-07-11) [Support]

  Launch system officers: ⓘ

  [loaded] 9 tasks Apple

  [loading] 163 tasks Apple

  [operation] 66 tasks Apple

  Demons of launch system: ⓘ

  com.Apple.watchdogd.plist [failure]

  [loaded] 44 tasks Apple

  [loading] 162 tasks Apple

  [operation] 84 tasks Apple

  Launch officers: ⓘ

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2015-06-23) [Support]

  com.extensis.FMCore.plist [no charge] (2016-06-26) [Support]

  com.Fortinet.FortiClient.fssoagent_launchagent.plist [no charge] (2015-01-16) [Support]

  com.nvidia.CUDASoftwareUpdate.plist [no charge] (2016-06-29) [Support]

  [no charge] com.oracle.java.Java - Updater.plist (2014-12-05) [Support]

  com.RealVNC.vncserver.PerUser.plist [no charge] (2014-04-01) [Support]

  com.RealVNC.vncserver.prelogin.plist [no charge] (2014-04-01) [Support]

  Launch of the demons: ⓘ

  [no charge]    PACESupport.plist (2012-07-11) [Support]

  com.adobe.SwitchBoard.plist [no charge] (2014-05-29) [Support]

  com.Adobe.fpsaud.plist [no charge] (2016-06-13) [Support]

  com.barebones.BBEdit.plist [no charge] (2014-06-19) [Support]

  com.Bombich.ccchelper.plist [no charge] (2016-06-25) [Support]

  com.CrashPlan.engine.plist [no charge] (2016-05-17) [Support]

  com.GoPro.stereomodestatus.plist [no charge] (2014-01-29) [Support]

  com.Microsoft.Office.licensing.helper.plist [no charge] (2011-03-10) [Support]

  com.nvidia.Cuda.Launcher.plist [no charge] (2014-11-05) [Support]

  [no charge] com.oracle.java.Helper - Tool.plist (2014-12-05) [Support]

  com.RealVNC.vncserver.plist [no charge] (2014-04-01) [Support]

  Other applications: ⓘ

  [ongoing] com.etresoft.EtreCheck.268512

  [ongoing] org.Mozilla.Firefox.251872

  [loading] 419 tasks Apple

  [operation] 158 tasks Apple

  Internet Plug-ins: ⓘ

  AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2015-06-23) [Support]

  FlashPlayer - 10.6: 22.0.0.192 - SDK 10.9 (2016-06-26) [Support]

  QuickTime Plugin: 7.7.3 (2016-05-04)

  AdobePDFViewerNPAPI: 11.0.04 - 10.6 SDK (07 / 07/2014) [Support]

  AdobePDFViewer: 11.0.04 - 10.6 SDK (07 / 07/2014) [Support]

  Flash Player: 22.0.0.192 - SDK 10.9 (2016-06-26) [Support]

  Default browser: 601 - SDK 10.11 (2016-05-04)

  SharePointBrowserPlugin: 14.4.3 - 10.6 SDK (2014 / 07 / 08) [Support]

  Silverlight: 5.1.41212.0 - SDK 10.6 (2016-05-03) [Support]

  JavaAppletPlugin: Java 8 73 02 version Check build update (06-02-2016)

  3rd party preference panes: ⓘ

  Preferences CUDA (2014-08-21) [Support]

  Flash Player (2016-06-13) [Support]

  GoPro (2014-06-01) [Support]

  Java (2016-02-06) [Support]

  TR-8 (2013-12-05) [Support]

  Time Machine: ⓘ

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 499,42 GB disc used: 154,39 GB

  Destinations:

  Time Machine [Local]

  Total size: 1.00 TB

  Total number of backups: 128

  An older backup: 29/05/14, 18:39

  Last backup: 29/06/16, 11:48

  Size of backup drive: adequate

  Backup size 1.00 TB > (disc 154,39 GB X 3)

  Top of page process CPU: ⓘ

  16% firefox

  2% WindowServer

  2% fontd

  0% kernel_task

  0% CVMCompiler (2)

  Top of the process of memory: ⓘ

  Kernel_task 755 MB

  Firefox 541 MB

  Softwareupdated 524 MB

  Sharingd 147 MB

  WindowServer 115 MB

  Information about virtual memory: ⓘ

  9,38 GB of free RAM

  6.61 GB used RAM (1.66 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  June 29, 2016, 12:33:17 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-123317_[redacted].panic [details]

  June 29, 2016, 12:32:38 self-test - spent

  June 29, 2016, 12:21:38 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-122138_[redacted].panic [details]

  June 29, 2016, 12:19:55 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-121955_[redacted].panic [details]

  June 29, 2016, 12:03:34 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-120334_[redacted].panic [details]

  June 29, 2016, 11:44:36 /Library/Logs/DiagnosticReports/backupd_2016-06-29-114436_[redacted].cpu_resour ce.diag [details]

  / System/Library/CoreServices/backupd. Bundle/happy/Resources/backupd

  June 29, 2016, 11:39:19 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-113919_[redacted].panic [details]

  June 29, 2016, 11:37:02 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-113702_[redacted].panic [details]

  June 29, 2016, 11:35:45 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-113545_[redacted].panic [details]

  June 29, 2016, 11:18:35 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-111835_[redacted].panic [details]

  June 29, 2016, 11:16:58 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-111658_[redacted].panic [details]

  June 28, 2016, 23:20:06 /Library/Logs/DiagnosticReports/CrashPlanService_2016-06-28-232006_[redacted].c pu_resource.diag [details]

  /Applications/CrashPlan.app/Contents/MacOS/crashplanservice

  June 28, 2016, 22:52:23 /Library/Logs/DiagnosticReports/Kernel_2016-06-28-225223_[redacted].panic [details]

  Anonymous UUID:

  D8BD978F-CE20-BC0E-9AE3-B2CAD98D978B

  Wed Jun 29 12:33:17 2016

  Panic report *.

  panic (cpu 0 0xffffff801ab04687 appellant): "hfs_swap_HFSPlusBTInternalNode: invalid key length catalogue #0 (3)\n"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3248.50.21/bsd/hfs/hfs_end ian.c:544 ".

  Backtrace (CPU 0), frame: return address

  0xffffff921ffeae10: 0xffffff801a6dab12

  0xffffff921ffeae90: 0xffffff801ab04687

  0xffffff921ffeaed0: 0xffffff801ab03473

  0xffffff921ffeaf20: 0xffffff801aaf3be7

  0xffffff921ffeaf50: 0xffffff801a931e3a

  0xffffff921ffeb060: 0xffffff801a9311de

  0xffffff921ffeb100: 0xffffff801a92f4bb

  0xffffff921ffeb170: 0xffffff801ab3159c

  0xffffff921ffeb1c0: 0xffffff801ab36967

  0xffffff921ffeb260: 0xffffff801ab14459

  0xffffff921ffeb980: 0xffffff801a92723e

  0xffffff921ffeba10: 0xffffff801ab849db

  0xffffff921ffebf60: 0xffffff801ac286a1

  0xffffff921ffebfb0: 0xffffff801a7ecc66

  The process corresponding to the current thread BSD name: mds_stores

  Mac OS version:

  15F34

  Kernel version:

  15.5.0 Darwin kernel version: kills Apr 19 18:36:36 PDT 2016; root:XNU-3248.50.21~8/RELEASE_X86_64

  Kernel UUID: 7E7B0822-D2DE-3B39-A7A5-77B40A668BC6

  Slide kernel:

  0x000000001a400000

  Text of core base: 0xffffff801a600000

  Text __HIB base: 0xffffff801a500000

  Name of system model: MacPro6, 1 (Mac-F60DEB81FF30ACF6)

  Availability of the system in nanoseconds: 40936714424

  last load kext to 4709008356: com.nvidia.CUDA 1.1.0 (addr 0xffffff7f9c684000 size 12288)

  kexts responsible:

  com.nvidia.CUDA 1.1.0

  com.paceap.kext.pacesupport.snowleopard 5.9

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.AGPM 110.22.0

  com.apple.driver.X86PlatformShim 1.0.0

  com.apple.driver.ApplePlatformEnabler 2.6.0d0

  com.apple.driver.AppleOSXWatchdog 1

  3.12.7 com.apple.driver.AppleGraphicsDevicePolicy

  com Apple.Driver.pmtelemetry 1

  com.apple.driver.AppleHDAHardwareConfigDriver 274,9

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.driver.AppleHDA 274,9

  com.apple.kext.AMDFramebuffer 1.4.2

  com.apple.iokit.IOBluetoothSerialManager 4.4.5f3

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.AMDRadeonX4000 1.4.2

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.5f3

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleLPC 3.1

  com.apple.driver.AppleThunderboltIP 3.0.8

  com.apple.kext.AMD7000Controller 1.4.2

  3.12.8 com.apple.driver.AppleMGPUPowerControl

  com.apple.driver.AppleIntelMCEReporter 107

  com.apple.driver.AppleFIVRDriver 4.1.0

  com.apple.iokit.SCSITaskUserClient 3.7.7

  com.apple.iokit.IOBluetoothUSBDFU 4.4.5f3

  com.apple.driver.AppleFireWireStorage 3.7.1

  com.apple.driver.initioFWBridge 3.7.1

  com.apple.driver.IOFireWireSerialBusProtocolSansPhysicalUnit 3.7.1

  com.apple.driver.LSI_FW_500 3.7.1

  com.apple.driver.Oxford_Semi 3.7.1

  com.apple.driver.StorageLynx 3.7.1

  com.apple.driver.AppleFileSystemDriver 3.0.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  com.apple.driver.AppleFWOHCI 5.5.4

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.iokit.AppleBCM5701Ethernet 10.2.0

  com.apple.driver.AirPort.Brcm4360 1040.1.1a6

  com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com Apple.kext.Triggers 1.0

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.driver.DspFuncLib 274,9

  com.apple.kext.OSvKernDSPLib 525

  com.apple.iokit.IOSurface 108.2.1

  com.apple.iokit.IOSerialFamily 11

  com.apple.iokit.IOAcceleratorFamily2 205,10

  com.apple.driver.CoreCaptureResponder 1

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.5f3

  com.apple.iokit.IOBluetoothFamily 4.4.5f3

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.AppleHDAController 274,9

  com.apple.iokit.IOHDAFamily 274,9

  com.apple.iokit.IOAudioFamily 204.4

  com.apple.vecLib.kext 1.2.0

  com.apple.driver.AppleSMBusPCI 1.0.14d1

  com.apple.kext.AMDSupport 1.4.2

  3.12.8 com.apple.AppleGraphicsDeviceControl

  3.12.8 com.apple.driver.AppleGraphicsControl

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.driver.X86PlatformPlugin 1.0.0

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.driver.AppleThunderboltEDMSink 4.1.1

  com.apple.driver.AppleThunderboltDPOutAdapter 4.1.3

  com.apple.driver.AppleHIDKeyboard 181

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1

  com Apple.Driver.USB.cdc 5.0.0

  com.Apple.Driver.USB.Networking 5.0.0

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.5.1

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  com.apple.iokit.IOFireWireSBP2 4.2.7

  com.apple.driver.AppleThunderboltPCIUpAdapter 2.0.2

  com.apple.driver.usb.AppleUSBHub 1.0.1

  com.apple.driver.AppleThunderboltDPInAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.3

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

  4.6.1 com.apple.iokit.IOFireWireFamily

  com.apple.driver.AppleXsanScheme 3

  com.apple.driver.AppleThunderboltNHI 4.0.4

  com.apple.iokit.IOThunderboltFamily 6.0.2

  com.apple.driver.usb.AppleUSBXHCIPCI 1.0.1

  com.apple.driver.usb.AppleUSBXHCI 1.0.1

  com.apple.driver.AppleUSBMergeNub 900.4.1

  com.apple.iokit.IOEthernetAVBController 1.0.3b3

  com.apple.iokit.IO80211Family 1110.26

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.iokit.IONetworkingFamily 3.2

  com Apple.Driver.corecapture 1.0.4

  com.apple.driver.usb.AppleUSBEHCI 1.0.1

  com.apple.iokit.IOAHCIFamily 2.8.1

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.iokit.IOSMBusFamily 1.1

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.driver.AppleEFIRuntime 2.0

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417,4

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  com.apple.kec.Libm 1

  Hello

  com.paceap.kext.pacesupport.master [no charge] (5.9 - 10.6 SDK - 2016-06-25) [Support]

  /System/Library/Extensions/PACESupportFamily.kext/contents/plugins

  com.paceap.kext.pacesupport.Leopard [no charge] (5.9 - 10.4 SDK - 2012-07-11) [Support]

  [no charge] com.paceap.kext.pacesupport.Panther (5.9 - SDK 10.-1-2012-07-11) [Support]

  com.paceap.kext.pacesupport.snowleopard [no charge] (5.9 - 10.6 SDK - 2012-07-11) [Support]

  com.paceap.kext.pacesupport.Tiger [no charge] (5.9 - 10.4 SDK - 2012-07-11) [Support]

  Same here > kernel Panics extensions - part 3 - Uninstall...