Tri matrix does not seem to work on an array of paths when it comes of <; not a path >;
See the simple VI attached with default values. I use 2011 sp1. Is someone using a later version of the LV that behaves differently? Did I miss something sensible that dictates what s
Insight would be helpful. It seems to behave properly in LV2012. empty path C:\ ASDF a different path
Tags: NI Software I have a desktop computer and a laptop. Both use the same router. The laptop does not connect to the network, but the office has no problem. My wireless adapter on the laptop is on, I tried troubleshooting. I tried to turn it off for 30 seconds then restart him. But nothing is resolved the problem. Any ideas would be helpful! Thank you Hello Maybe this can help. These steps and tell us where is the breaking point. Check the Device Manager for the wireless card valid entry. http://www.ezlan.NET/Win7/net_dm.jpg If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card. Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections. http://www.ezlan.NET/Win7/net_connection_tcp.jpg Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility. ---------------- Make sure you firewall No. preventing / blocks wireless components to join the network. Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active . --------------------------- Stack TCP/IP work should look like. Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings. http://www.ezlan.NET/Win7/status-NIC.jpg Description is the data of the card making. The physical address is MAC of the card number. The xx must be a number between 0 and 255 (all xx even number). YY should be between 0 and 255 ZZ should be between 0 and 255 (zz all the same number.) The date of the lease must be valid at the present time. * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP. * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration. --------------------------------------------------- A message in the small window that says connected wireless doesn't means that you are really a valid functional connection. Above everything is OK, you must be able to connect to the router. Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see. If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security. Enable security wireless after you eat to make a functional connection. Jack-MVP Windows Networking. WWW.EZLAN.NET Need Windows 7 drivers for my system... I tried and does not work Hey there, I have a HP Pavilion dv6700 Notebook PC I just installed Windows 7 Ultimate 32 - Bit on it and it works fine. I can't find a compatible video driver... The driver available from hp website is only Vista not Windows 7. I tried to install Vista driver still to see if it would work since most Vista drivers work fine on Windows 7. During installation, I see this error: "The NVIDIA Setup program could not find all the drivers that are compatible with your current hardware. The installation program will now stop. » Can someone please help me find some sort of video drivers that works with Windows 7 on my system? Thank you Hello Try to download and install the driver of reference on the link below. http://www.GeForce.com/drivers/results/8971 After installation, restart the laptop. Kind regards DP - K "Reboot and select proper boot device or insert boot media" tried, still does not. I went into the BIOS and changed the order of Boot Drive so that the hard drive comes first as a boot priority, and nothing happened. I always get the reboot and select proper boot device error. My power supply broken so I took an old and put this one rather than broken, but I might miss some cable? I don't know because I'm not good with computers. So if you can help me please, I would be grateful. Thank you. Hello Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing. I would like to ask you: What is the brand and model of your computer? To diagnose this problem more, I recommend you to check and make all the cables are properly connected to the devices in the computer. For help with the same, you can either check the manual of the material that you may have received with your computer or you can contact a hardware technician to do the same. Once we are sure that the connection is good, we can diagnose more if the problem is with the software/operating system or if it is a hardware failure. If you have a Windows DVD or USB created. You can try to boot from the installation media and run a system restore or repair in recovery options. To do this, follow the steps below: Boot from the installation media. When you see the Install Windows page, press or click repair your computer to start Windows recovery environment. In the choose an option screen, Windows recovery environment, press or click on troubleshooting. Click on Advanced options etselectionnezStartup Repair. If the auto repair fails, try the system restore. It will take your system at the time, and when it was working fine. Follow the steps below: Boot from the installation media. When you see the Install Windows page, press or click repair your computer to start Windows recovery environment. In the choose an option screen, Windows recovery environment, press or click on troubleshooting. Click on Advanced options etselectionnezSystem Restore. Select the restore point where everything worked well and follow the on-screen instructions System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed. Hope this information was useful. Let us know the results once you have tried these methods. Thank you (similar to the PivotTable) matrix does not Hello Do not forget that NULL + x is set to NULL. my account has been hacked had backit is Arabic, I tried to translate does not work help Unfortunately my account has been hacked. I have it back now, but it of in the translation of Arabic.Tried, but does not not for the entire site. Please can you help. Unfortunately my account has been hacked. I have it back now, but it of in the translation of Arabic.Tried, but does not not for the entire site. Please can you help. You did not bother to tell which e-mail program you use. Maybe one of them? Satellite 105-S157: USB 2.0 via a PCMCIA card does not work I installed the pcmcia card with BIOS update V2.1 and work under WIN XP sp2. This laptop does support USB 2.0? Please help? Thank you Hello It is a brand new model Toshiba and I guess that it supports high speed USB 2.0. HP Scanjet 5590: Scanjet 5590 &; Win10 64-bit - install and scanning does not work 1 install the latest official software for Scanjet 5590 stops in the Middle after the first component (software scanjet 5590) before TWAIN / Iris etc. Macromedia window remains opent "Please wait" but the 2nd part of the installation process does not start. 2. no doubt as a result no scanninng. Before the scanner buttons not working do not (missing twain) and scan from the software installed launch the scanner (activate powersave); Opens the window of the software, but analysis does not start. Win10 64-bit; USB. HP CP1025nw the wireless is the other HP product installed. ASUS z97 MB, i7 - 4790 k / 16GB, SSD. I tried and does not work: -different, another USB port USB cable -new installation of 64-bit Win10 -a lot of removing the software and driver (windows install cleaner, file removal, registry) and reinstall -HP support assistant/framework/scanning, printing doctor [result "don't install the driver" awhile, but obviously it is installed and the wizard fails to resintall it] Installation of the software in safe mode (after editing registry it is possible) all the complete component installs (scan software, iris, twain, etc.) but always the same questions: scanning does not work. Any idea or suggestion? OK, here's the solution that works for me: In brief -check out you the shape of the package files (winrar will be required) -HPZstub.exe (NOT run Setup.exe) problem solved... I went two hollow guidance package and remote session with support and got this link after my file submitted in support of the L2. Satellite L45: touchpad scroll feature does not work OK, I have a laptop Satellite L45 and I need help. I've looked throughout the computer and tried everything and nothing seems to work. My father had the same problem with his computer, but he says it seems to work himself. If someone could help it would be greatly appreciated. Hello Have you checked if the touchpad scroll function has been enabled and configured correctly? Do you know where to find these parameters? + Control Panel-> mouse-> last (device settings) tab-> settings button. Here, you should check the * virtual scrolling *. Good bye HP Pavilion - 14-ab020tu: ab020tu HP Pavilion Notebook 14 - Wlan driver does not work I just bought "HP Pavilion - 14-ab020tu ', installed windows 8.1 pro, downloaded drivers and it seems it works perfectly but wifi. When I tried to install this driver Broadcom WLAN (http://support.hp.com/vn-en/drivers/selfservice/HP-Pavilion-14-Notebook-PC-series/7771364/model/8189... his charge at the halfway point on his instalation and drops then a message appears and asks me if the program worked well. Ive tried to install this driver under Mode safe and in charge of the installation, but when he was installing an error came out saying that the installation cannot continue because update.cpp 1205 is not found or something. I also tried to find the driver from broadcom site, but could not find. And now I can use e-net only via cable. Can someone help me with this problem? Hello: See if this driver works... I am a user in advance, but this got to be one of the funniest problems ever. First, I had 2 headphones with microphone.
I have a similar problem with my netbook a built-in microphone running Windows Starter, that's how mine to get the fix: Control Panel - his - recording tab - click on Configure button - set up micro - Configuration of the Microphone Wizard. You'll see three choices 1. Headphones Microphone 2. Table microphone 3. Others. All what I have to do to fix my netbook is to select the desktop instead of headphones with Microphone Microphone (it has been revived somehow). \n doesn't work does not correctly Hello fellow Scripting Guys - it's probably something really basic, and it of really something minor but would be appreciated if someone could look in and explain why the \n does not work properly. I have a code; I run my use of pallets; I just bought Photoshop CC and the shortcut of the space for the hand tool bar does not work? I googled solutions to the problem and most of them said that I need to close other programs that I opened, as well as photoshop and then restart the program, so I tried this and nothing seems to work. Tool hand by itself works, but I prefer by far with the SPACEBAR shortcut as I need to work fast and it's much easier. Is it possible that I need to activate the SPACEBAR shortcut, because I bought the software this morning? Thank you Hi Jessthristan, Hold the space bar to drag documents works very well for me. You can try closing out of all your other applications one by one and see if one of them interferes with Photoshop? Chrome is known for sometimes pleasant not with that. under windows xp... IE guard suspended and freezing... have you tried several fixes nothing seems to work... am really frustrated with this... dns cache flush... someone can help please Download, install, update and do a full scan with these free malware detection programs at: Malwarebytes (MMFA): http://malwarebytes.org/ SUPERAntiSpyware: (SAS): http://www.superantispyware.com/ http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner http://www.eset.com/us/online-scanner/ eset online scanner post back with the results and more info: brand and model of browser, OS, pc and ServicePack, current antivirus? What was the first question? Have what steps you taken? What are your error messages? Wacom Art Pen barrel rotation does not work Guys, I am under Photoshop CS3. I recently got a Wacom Cintiq 22HD touch with a Pen Art. The Art Pen meant to give me this 6th rotation (rotation of Cannon). But when I tried, it does not turn one of my custom brushes. Do you guys know what happens? Thank you. Shaun im not sure 100%... but I think you need version cs6 or newer. Is there a limit of 24 rank in a dropdown table filter in Figure 3.6.1? Hi, am I wrong in thinking that there is only a limit of 24 rows in a result of the Filter Table? I have more lines of data (client names) which need filtering, but not appear. Is there a possible way to show a list of filters of all unique named row You can use Lifecam Cinema on a Samsung Smart TV for applications like Skype I have a Samsung Smart tv and I am trying to use my Microsoft LifeCam Cinema webcam with her so that I could Skype through TV. It does not recognize the webcam... is it possible to do this? How can I reinstall my google toolbar? I have disenabled he by chance I want to turn it back on. Linksys WAG54GS ver 1.1 firmware update I need to update my firmware before upgrading my ISP to the ADSL2 +. Research on the Linksys website, the latest firmware seems to be 1.01.03, but I understand that 03 is not compatible ADSL2 and it also has a version 1.01.11. Can someone let me kno What do I need open the email attachment code 'wps. I received an email attachment with the code "wps" and I can't open it. I have Vista and Windows 7. Someone told me my system does not recognize wps, but there is a difficulty. Can anyone help?Similar Questions
SN: {removed privacy}
REF: KN843UA #ABA
I'm using after query to create a matrix (similar to a PivotTable) with categories through horizontal and vertical... everything works fine except that the TOTAL amount is displayed only when all cells horizontally has a value
with got_aggregates as
(
Select
LEAD_SOURCE,
SALES_MANAGER,
ACCOUNT_CONSULTANT,
Max ((DECODE (SALES_STAGE, 'ALWAYS CONTACT', opportunities, NULL)
) STILL_CONTACTING,.
Max ((DECODE (SALES_STAGE, 'SPLEEN', opportunities, NULL)
DUD)),
Max ((DECODE (SALES_STAGE, 'AUCUN COURANT OPP', opportunités, NULL)))
) NO_CURR_OPP,.
Max ((DECODE (SALES_STAGE, 'CALL RETURN LATER DATE', opportunities, NULL)
) CB_LATER_DT,.
Max ((DECODE (SALES_STAGE, 'MEETING BOOKED', opportunities, NULL)
) MEETING_BOOKED,.
Max ((DECODE (SALES_STAGE, 'OCCASION IN EOM', opportunités, NULL)))
) OPP_IN_EOM,.
Max ((DECODE (SALES_STAGE, "L'AUTRE", opportunités, NULL)))
)),
Max ((DECODE (SALES_STAGE, cm, opportunities, NULL)
TBD)
Of
(
Select
LEAD_SOURCE,
SALES_MANAGER,
ACCOUNT_CONSULTANT,
SALES_STAGE,
Sum (OPP) opportunities
Of
(
Select
LEAD_SOURCE,
SALES_MANAGER,
ACCOUNT_CONSULTANT,
(CASE
WHEN SALES_STAGE like '%' |' ALWAYS CONTACT ' |' %' CAN ALWAYS "CONTACT".
WHEN SALES_STAGE like '%' |' DUD' | '%' THEN 'SPLEEN '.
WHEN SALES_STAGE like '%' |' NO COURSE OPP' | '%' THEN 'NO CURRENT PPO '.
WHEN SALES_STAGE like '%' |' CALL-BACK' | '%' THEN ' CALL-BACK DATE FIXED.
WHEN SALES_STAGE like '%' |' MEETING ' |' %' THEN 'RESERVED SESSION.
WHEN SALES_STAGE like '%' |' EOM OPPORTUNITY ' | '%' THEN 'EOM OPPORTUNITY'
WHEN SALES_STAGE like '%' |' QUALIFIED OPPORTUNITY ' |' %' THEN 'EOM OPPORTUNITY'
WHEN SALES_STAGE like '%' |' ASSIGNED TO A DIFFERENT REP'. '%' THEN 'SPLEEN '.
WHEN SALES_STAGE = 'OTHER' THEN 'OTHERS '.
WHEN SALES_STAGE = 'OTHER' THEN 'OTHERS '.
OF OTHER SALES_STAGE
END)
SALES_STAGE,
Count (PROSPECT_NAME) as Opp
from TABLE_A
Group
LEAD_SOURCE,
SALES_MANAGER,
ACCOUNT_CONSULTANT,
SALES_STAGE
)
Group
LEAD_SOURCE,
SALES_MANAGER,
ACCOUNT_CONSULTANT,
SALES_STAGE
)
Group
LEAD_SOURCE,
SALES_MANAGER,
ACCOUNT_CONSULTANT
order by
LEAD_SOURCE,
SALES_MANAGER,
ACCOUNT_CONSULTANT
)
Select a.*, STILL_CONTACTING + RATE + NO_CURR_OPP + CB_LATER_DT + MEETING_BOOKED + OPP_IN_EOM + OTHERS + TBD as TOTAL
Of
got_aggregates one
order by
LEAD_SOURCE,
SALES_MANAGER,
ACCOUNT_CONSULTANT
Using NVL (or COALESCE) to process the missing as 0 values when you add it. Do something like this in the main request:
select a.*
, NVL (still_contacting, 0)
+ NVL (dud, 0)
+ NVL (no_curr_opp, 0)
+ NVL (cb_later_dt, 0)
+ NVL (meeting_booked, 0)
+ NVL (opp_in_eom, 0)
+ NVL (other, 0)
+ NVL (tbd, 0) AS total
...
View all Windows Live and Hotmail questions in the appropriate forum found here:
http://windowslivehelp.com/
It seems to work normally in Device Manager, but when I plugged in the USB, it may not recognise.
If I can access usb PCMCIA ports.
How can I make it work?
Sometimes, the operating system can not recognize external USB devices due to the limitation of power. The fact is that the USB port gives the 500mA. It is a standard value.
If the USB device use a higher power, the OS cannot recognize and activated the device.
In this case the external power supply is necessary. Another possibility is to use the USB hub with an external power supply.
The functionality of scrolling on the touchpad worked for awhile and now it will not work.
I don't really know too much about computers in a first time, and no one I know can help me.
Mine has not yet and it drives me crazy.
Thank you very much.
I recommend that you check these settings before you to reinstall the driver for the touchpad.
You can find it in
//created by Daryl Smith
//puts artist name, filename, and date in the top left of the file.
#target illustrator
var thisDoc = app.activeDocument;
var filename = app.activeDocument.name.replace(/\.[^\.]+$/, '');
var createdate = app.activeDocument.modified;
var theDate = new Date();
var day = theDate.getDate();
var month = theDate.getMonth() + 1;
var year = theDate.getFullYear();
var hours = theDate.getHours();
var min = theDate.getMinutes();
if (min < 10)
min = ("0" + min);
var morn;
if (hours >= 12)
{
hours = hours-12;
morn = " PM";
}
else
morn = " AM"
var saveDate = (month + "-" + day + "-" + year + " " + hours + ":" + min + morn );
var nameTextFrame = thisDoc.textFrames.add();
nameTextFrame.contents = globalartistname + "\n" + filename + "\n" + saveDate;
nameTextFrame.filled = true;
nameTextFrame.alignment = "center";
var thisdoc = app.activeDocument;
var hasDocCoords = app.coordinateSystem == CoordinateSystem.ARTBOARDCOORDINATESYSTEM;
var p = thisdoc.pageItems;
for (var i = 0, l = p.length; i < l; i++) {
var pID = p[i];
if (pID.guides == true) {
var guideBox = pID
}
}
var wNum = guideBox.width;
var hNum = guideBox.height;
var tboxw = nameTextFrame.width;
var tboxh = nameTextFrame.height;
var xOffset = (wNum/2);
var yOffset = (hNum/2);
var xNum = guideBox.position[0]+xOffset-tboxw-50;
var yNum = guideBox.position[1] + tboxh + 80 ;
nameTextFrame.position = [xNum,yNum]
var putname = new File("S:/Art/ArtDept/Illustrator JS Palette/Scripts/Art Share Server/Construct/filenameonart.jsx");
miscgroup.add ("iconbutton", undefined, ScriptUI.newImage (miscputnameIcon.a, miscputnameIcon.b, miscputnameIcon.c, miscputnameIcon.d),{style:"toolbutton"});
Maybe you are looking for