Trial Portege R830 - 10V Bluetooth drivers 30 days

Similar Questions

• Portege R830-10V - connection UMTS falls down very often

  Hi all
  I have a SIM card in my laptop I've used in a netbook before Samsung. With the netbook, the link never broken. But with the 10V, happens every 20 or 30 minutes. When the connection is lost, I have to restart the laptop to connect again. If I try to click on windows again that nothing happens to connect in the Network Center. After a few minutes, a message windows cannot connect to the network.
  The laptop shows that the quality of the network is good.

  I have reviewed the parameters of connection of the netbook and transferred to the r830-10V but it does not help. I also disabled all energy saving options. For me, it seems to be a driver issue, but I'm not sure.
  Someone knows something about this problem?

  Hello

  I m not quite sure if it s a driver problem or malfunction RF Power Control Utility may be 3G but I think you should try to reinstall all software related.

  Here you will find the area of support 3G here:
  http://APS2.toshiba-tro.de/WLAN/index.php?page=home

  I recommend reinstalling the drivers of 3G wireless, 3 G Wireless Manager and 3G RF Power Control utility

• Portege R830-10v / i7 / change internal SSD 225 GB

  Hello

  I need to change my flash drive SSD internal 225 GB for a 512 GB SSD!

  What should I do to the hardware and software level?
  Can I take any SSD?

  Thanks for the help?

  Best regards, Florence

  The HDD or SSD drive update requires no special modifications in the software or hardware.
  You need a compatible player SATA SSD 2.5.

  Here is a nice and very useful document how to upgrade / replace the Portege R830 & Satellite R830 series SSD or HARD disk drive.

  http://APS2.toshiba-tro.de/KB0/CRU18037E0000R01.htm

  Of course, after this upgrade, you'll need to install the system new the best choice would be its use or recovery disk and recover the laptop to factory settings.

• Portege R830-10V P/N: PT321E AHCI Driver for Win XP 32 bit

  Hello

  I'm looking for driver AHCI Inter chipset 6 series 32bi Win XP. I can't find any work. Tried drivers from toshiba web, I tried web drivers of intel - was trying to google for 4 hours in 2 men. His does not work.

  I can't have win 7 on it, because I have Windows NT 4.0 Domain control and Win 7 does not work.

  So, its simple, I have Windows XP installed with all the AHCI drivers.

  What do you im? Force just install driver AHCI (in the hardware Manager)-online BSOD appears, badly restarts, get bios and change the Compatible in AHCI. I got BSOD again, error is unaccesible by car or something like that so I don't know, I have bad driver. Should I change compatible and try a different driver. I tried this way, all the drivers package from toshiba support web and other Google.

  I had a call with the help of toshiba authorized and that they cannot help me, because they do not know.

  Please, can you, someone help me?

  Thank you.

  Perhaps this Toshiba HowTo might be useful for you
  [How to integrate the AHCI driver when installing Windows XP | http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm]

• Portege R830-10V - how to get press PRTSCN to work? (PRTSC)

  Help, please. I'm new on the Toshiba. My print screen button does nothing and I need to use it every day.

  Thank you, Brenda

  Brenda Hay

  Sorry but I don't understand what you mean exactly.
  Maybe stupid question now, but what should happen when you use the button PRTSC?

• Portege R830-10V - DVD drive makes strange noises

  Hi all
  I just bought this machine and registered the following question:

  If I put in a portable DVD starts very strong buzz. This noise disappears if I put a finger on the reader. In addition, the DVD player starts to chat if I press the keys above the player as the arrow keys. Bothers me a lot.

  I called Toshiba support and they said that they can pick up the laptop. But it is possible that this service costs because maybe this problem is part of the specification.

  You have any ideas? What can I do?
  Best regards
  Denis

  Hi Denis_3,

  Have you noticed this problem with different CD and DVD or just a medium? In General, I also noticed the same behavior, but sometimes just with one disk, so the problem is the drive itself in most cases.

  On this path through the forum it s is not easy to say what the reason is but if it s associated with CD/DVD player and the reader needs replace it will cost you nothing because it s during the warranty. Of course, for out of warranty repairs, you must make ;)

• Portege R830 - Download Cant PT321E value added package driver.

  Hello!
  I can't download the toshiba.eu/support/drivers/laptops/ driver for

  Toshiba Portege R830 - PT321E
  Windows 7 64 bit
  Location - Latvia

  Download keeps failing sometimes to 10% to 50% complete.

  Sometimes the page is inaccessible. Tried to download the driver of different networks.

  Thank you.

  Today, I tried again to download the driver package. Downloaded without any problem.
  Wasn't the best place where to post about him, but I couldn't find it on the page where I can report problem Web page technique.

• Portege R830 - functional keys not working after installing Windows 7

  Hello
  I have Toshiba portege R830.
  I install new windows 7, no recovery - new windows.
  Now, I have a problem because my function keys don't ' t work.
  I can't turn on y wifi with fn + F8.
  I was looking for drivers, but I don't ' get there for my toshiba.

  Originally posted by Tomasz
  

  Hello
  I have Toshiba portege R830.
  I install new windows 7, no recovery - new windows.
  Now, I have a problem because my function keys don't ' t work.
  I can't turn on y wifi with fn + F8.
  I was looking for drivers, but I don't ' get there for my toshiba.

  Have you installed the VAP (value added package)

  That should restore the functionality of your

• L50-A-1f2 - Bluetooth drivers satellite disappeared

  Hello
  I own a toshiba satellite l50 a 1f2.
  Bluetooth drivers on my laptop went missing a few days ago.
  In fact I don't know why it happened

  I tried to install the bluetooth stack and bluetooth filter driver package (what is the difference?), but I don't have a solution.
  What do you suggest to me that I do?

  Thank you very much.
  Sorry for my enligsh

  any suggestions?

• Need to check the update of the BIOS Portege R830 without Intel TXT

  Hello Forum,

  I have exactly the same problem as described here 2 years ago:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65519

  I need to update my BIOS, but I can't because the update of the BIOS told me that the Intel TXT is enabled.
  Unfortunately I can not disable it in my bios. Its just not selectable. The 'cursor' jumping just above him.
  I can only 'hide' which does not help.
  I have the same thing for the VT - x and VT - d setting in the BIOS. Is not selectable or editable as well.

  TPM is not active if...
  I installed after infineon and he tells me I need to enable the TPM in the bios to use. :-(

  I have a very old Bios Version 3.1 and I read in the changelog that there are a lot of TPM in v 3.4 and 3.5 related changes...

  In any case...
  A P007Dv360A_EC77V140.zip file has been transferred to 2shared.com who fixed it at the time, a user named Paolo30.
  Unfortunately, that this file has been deleted on 2shared.com

  can someone please provide this file (or an update of the bios later) which resolves this issue?
  Thanks in advance.

  Portégé R830 - 10 p belongs to the series of PT321 if you need the BIOS for Portege R830 PT321

  You can download older versions of pages driver Toshiba BIOS.
  For example: http://www.toshiba-asia.com/sg/support/drivers

  On this page of Toshiba Asia I could find all the BIOS for this Portege model.

• Portege R830 had dead blue when the screen connects to wifi or shared internet

  It seemed began as soon as the automatic update from Microsoft on Qualcomm, Atheros, every time when connect to any WIFi, share internet, my portege R830 shows blue screen and the following error message:
  unhandled system_thread_exception (athwb.sys)

  I found that I am not the isolated on the Web site. I tried to remove and stop updates. However, once I connect to the internet, the blue screen comes back.

  Is the problem because of the network adapter? The model is Qualcomm Atheros AR9002WB
  Can solve the problem if I download the new driver of Qualcomm-Atheros site? Or if I replace a new adapter?

  The athwb.sys file belongs to the Atheros wireless driver. Usually placed in C:\Windows\System32\drivers\athwb.sys
  It seems that in your case this file causing the BSOD.

  I found a very interesting detail about this problem and why it seems.

  A user wrote:
  {quote} The issue is due to a database hosted on Linux kernel mapped NAS drives and if the Client for NFS is installed on the windows machine. For some reason, this configuration does not work. If you mount your shares and NFS is installed it tries to use the NFS client and fails miserably. Trick is to disassemble all the shares of logging in Safe Mode and then rebooted and uninstall the NFS client and then mount your shares. {quote}

• Portege R830 - fingerprints fingerprints are more recognized

  Hello

  Last week, I bought a Portege R830. I registered my 2 index fingers and everything has worked fine for about 2 days. Now when I put my index fingers, the utility no longer recognizes my impressions, neither one.

  How can I delete the prints and start again? I tried to go to the utility, but since it does not recognize my impression, it does not give me access.

  TIA
  Patricia

  Start the utility of fingerprinting as an administrator and click the button "delete all traces of fingers. He may need to enter a password to give you access.

  If you don't remember the password, you may have to send the laptop in to a Service Center for Toshiba to remove fingerprints.

• Portege R830-10 q - need good WLAN Driver for Win7

  I had to format and install Windows 7 Enterprise x 64 on my new Portege R830-10 q, but I can not install the correct wireless driver.

  I used the instructions on this page to determine whether a device Intel - http://aps2.toshiba-tro.de/kb0/HTD0302U00000R01.htm
  It is not the model of the device in the database.
  I tried all the drivers for Win7 Intel (and even a few others) on this page http://aps2.toshiba-tro.de/wlan/?page=downloads

  But none work.

  Also tried to use the Intel tools to discover the device, but it also does not recognize.
  Help!

  Thanks for sharing this with us!

• Portege R830 - problems of 3G connection after installing Win 7 32 bit

  Hello

  I went down a Portege R830 Windows 7 64 bit for Windows 7 32 bit with drivers of Toshiba. I put a SIM from my provider.
  In the windows Network Manager, 7 and in the Toshiba Wireless Manager I can see the right provider and HSPA network but when I start the connection, it does not (I don't have a PIN code).

  It is failed with Windows 7 Network Manager and Manager Toshiba wireless (I don't have this problem with the Portege R700 windows 7 32bits)

  But I found a small solution (but I think that's not enough):
  I have created a dial-up connection, with a number * 99 #,.
  I started the connection, it does not happen, but after that, when I raise my first connection is good.

  I don't know why, it's as if the modem is in sleep and the dial-up connection wake-up the modem, because after all is good (win7 Network Manager, Manager wireless Toshiba) so if I reboot the Portege.

  I want to avoid the dial-up connection on my r700 portege with 32-bit windows 7

  Thanks for your help and sorry for my English.
  support for the toshiba told me to reinstall windows 7 64 bit to solve the problem :)

  Hello

  Are you sure that you have correctly configured the connection?
  Here is a nice FAQ that explains step by step how to connect 3G using the Toshiba Wireless Manager:

  + How to configure and set up a 3G connection via the preinstalled Toshiba Wireless Manager +.
  http://APS2.toshiba-tro.de/KB0/FAQ1A037W0000R01.htm

  and here you can find instruction how to create dial upward of connection using own configuration of Windows.

  + How to create a Dial-Up connection with 3 +.
  http://APS2.toshiba-tro.de/KB0/HTD9802OF0000R01.htm

  Recommend check them both!

• Sound when Portege R830 is anchored and display lid is closed

  I have a fairly new Toshiba Portege R830 laptop (PT321E-01E00YEN) who don't use speakers integrated if it is placed in a dock with the closed laptop screen or the microphone.

  This causes problems when you try to work from only an external monitor, but when I flip the lid open, it works fine.

  I am using a replication of port II (PA3916B) and once installed a month ago, all device etc drivers has been updated to the lasted available so I think that there is a software configuration option that just needs to check or disabling.

  No one knows where that might be?

  I test this on an another older duplicator that has been purchased for a R700-15R and have exactly the same problem, so I don't think it is hardware related.

  Any help would be greatly appreciated :-)

  Please don't get me wrong, but to me this behavious seems logical. When you close the lid internal speaker and microphone placed close to the cam are blocked so I don't know how you want to use.
  When the laptop is closed and set aside, it's almost the same as the office. All devices that you need should be connected to the docking station and external devices.

  If you use your laptop on a regular route, but they also appear external to office extension, you can use all the internal devices to your laptop.

  In my opinion the point of berthing of the use of the station of different devices to your laptop, but using the docking station, you can remove the laptop and take it with you without disconnection of all connected devices, including the power supply.

  To be honest, I see here no problem. You can contact Toshiba service nearest and ask for opinions, but I'm sure the answer will be the same.