Triangle missing tab Fix

Similar Questions

• Basic missing tab settings

  Hi people

  We have a server farm implemented here with 6 Terminal servers and printers loaded locally on each server. The tab settings in the printer preferences when printing c7260 on two of our servers or our C5240 is missing. On the other 4 servers, it is fine. Exactly the same drivers loading on all servers and in fact all of them were created as of the VMS in a windows image. I've checked everything I can think but can figure out what's different

  Any ideas?

  Thank you very much

  So OK, just reinstall the same driver fixed

• my cd/dvd missing Mr fix not planned I also tried upper and lower in the regester not there to remove

  CD/dvd lack tried to delete the upper and lower part in the registry but were not there to remove. tried to delete the device manager that he should not delete and re-start

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Apps missing tab

  Hello

  I'm on a work computer, but I think I have administrator rights and have installed Adobe (Photoshop CC) products on this computer before.  I try to install a free trial of InDesign, but the Apps tab does not show in my version of creative cloud. The top of the nav page has only ' home community Stock assets.  Apps is just missing.

  Is there a problem with the program or if it is probably blocked by IT?

  I tried following these steps, but not of change:

  1. In the context menu, choose Preferences. Click the account and then click the sign of creative cloud.
  2. Note:  If creative cloud sign is grey, go to step 2.
  3. Of the same gear in creative cloud icon, choose to leave Creative Cloud.
  • 2. Rename the OPM.db file that is located in the OOBE folder located here:
    1. Mac: ~/Library/Application Support/Adobe
    • Windows XP: \Local Adobe application
    • Windows 7: \AppData\Local\Adobe
    1. Change the name to OPM.db.old
  1. Restart the Adobe Creative Cloud.
  2. Reconnect to your Adobe ID
  If there is a way to fix it please let me know.

  Thank you!

  Corrie

  never mind - found a thread to fix:

  Missing Creative Cloud Desktop applications tab

• Error: "C:\Program Files/reviversoft\Registry Reviver\unins000.msg"is missing." "Fix the problem or get a new copy of the program.

  Original title: cannot start computer

  Cannot start computer

  This response comes and does not let me start the computer (Message missing file 'C:\Program Files/reviversoft\Registry Reviver\unins000.msg "is. Fix the problem or get a new copy of the program) what should I do to get the computer?

  Hi Dan Maarsman,.
   
  -Did you change on your computer before this problem?
  -Do you have any third party registry cleaner program installed on your computer?
   

  Start your computer Safe Mode and check if you can successfully start.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  For more information, see:

  A description of the options to start in Windows XP Mode

• MMS 5650 missing Center Fix

  Hello world!

  I read never really many on the Dell forums, but I want to share something with everyone in hopes of helping someone, I discovered.

  Recently, my neighbor, who I do a good bit of work at the computer, went to a yard sale and bought a system MMS 5650. She bought thinking it was a computer! Again, however, I was working on his computer that night and told him it was not a computer, but it is rather a speaker system. She said that she couldn't use it, so she gave it to me.

  So I get home and I'm looking on it, to realize that missing a center speaker. After some research, I learned that the center speaker feeds the whole system with its switch on / off. However, being as curious as I am, I opened the subwoofer bass/receiver to do tests. After a while of wire tracing, I decided to try jumpers on some pins. Hey, no center speaker, so if it is fried, it fried.

  I realized that the on / off switch circuit had to do with the DB9 connector on the back of the unit. I spent some time to place a wire on several pins with no luck. Then, suddenly, the whole system came to life only to falter to silence, literally. This brings to mind a potentiometer, or wheel to control volume, must be on the center speaker.

  This means that there must be another set of pins that needs a rider. Then, I tested a bit more and found that the PIN was right next to the first two. It is such an easy solution!

  Here's how to fix it: put a thread on pins 2 and 7 and another wire on pins 3 and 8. This creates the circuit and the powers on the system. Optional: I did my riders in an old series extension cable to tinker more easily.

  He seems to pin 6 has some amount of tension to this topic, but I have no idea how. This leaves 4 that pins open, right? Fix. One thing to note is that the grounding is done through the screws on the original DB9 plug. So, in theory, the other 2 pairs of pins to go to two separate speakers, i.e. inside the center speaker!

  It shouldn't be difficult to find what areas focus the audio, and then I'm going to attach a headphone jack of 3.5 mm on each that will then be linked to a set of speakers left from an old computer. You could exchange the plug for headphones with RCA plugs depending on your situation.

  This concludes how to fix your MMS 5650 home theatre system. Feel free to ask questions and make suggestions. The difficulty of the ultimate amateur, go to radioshack and get a male DB9. Weld the two pins necessary sets and fix your catch in a pretty box also available here. Nice and clean!

  Not bad for an amateur teen, huh?

  Hello

  Not bad, but I have a different pin

  I was looking for the same solution for my Center speaker is also absent.

  As I found nothing on the internet, so I took the bass part, a little behind all this engineering.

  Here's what it looks like on my end of the world:

  pins 1, 2 are shorted and the center speaker on (+)

  PIN 5, 9 are also shorted and also for the center speaker (-) (I'm not sure of the +/-thing)

  PIN 4, 6 connect these (power)

  pin 3 connect a potentiometer (out / wiper)

  PIN 7 potentiometer (Terminal 1)

  PIN 8 potentiometer (terminal 2)

  When I tried with a 100K potentiometer, it was too big, could not turn down the volume. It is probably a 10K, because the system has its own volume control ic.

  So here it is, hope I helped for all the jokers (like me) who doesn't have enough money to buy a new system.

  Peace

  Jim the HUN :D

• Entries missing tab in data controls

  Hello Experts

  I use Jdeveloper 12.2.1. I was working on this project last week and everything was fine. But today when I started the project in Jdev I see the empty data controls accordion.

  I tried to delete the system folder, by selecting contains CheckBox controls data in the project properties without a bit of luck.

  Can someone let me know if I'm missing something. Not sure why he suddenly disappeared.

  Finally managed to fix.

  I compared Model.jpx file from a different application and lying under the missing lines in the tag. Add that and restart Jdeveloper. Now I can see the entries in the data controls.

• Missing tab of the Spry Menu on CS5 using an iMac (only 2 computers do not see)

  I use Dreamweaver CS5 on iMac in my class. Two students are not able to see the blue tab of the Spry menu bar.  Is there something that should be selected in so that they can see it?  I thought that maybe they missed a step, so we followed our book and recreated the Menu bar on another page.  Once the menu bar is complete and you click on the Blue Menu Spry tab is not available.  Any suggestions would be greatly appreciated.

  Spry menus have been abandoned by Adobe.two years ago because they can not be used by millions of visitors on portable devices.  We use now of JQuery menus or pure HTML/CSS menus.

• Missing: Tab "Search"

  I try a project output in a CHM file using RoboHelp 8, and the result is completely missing a 'Search' tab. There is a table of contents, an Index tab tab, and that's all. (The project has a glossary, so the absence of glossary it's surprise). I searched through the forums and issues closest I saw were people whose Search tabs "did not work." However, the hotfix in this situation (re-recording of some DLL files), has not worked for me. I hope that someone out there has an idea how find a search tab missing thank you!

  Hello

  Try this. In RoboHelp, click View > pods > project implementation.

  Expand the Windows pseudo-dossier.

  You see an icon that looks like this?

  

  If you see this icon (the one with no globe inside), double-click it. If you don't see it, make sure first that the type of your primary provision is Microsoft HTML Help. Then click the icon to create a new window.

  

  Whatever it is, you should see the window properties dialog box. You must make sure that the 'Search' tab is enabled.

  

  Hope this helps... Rick

  Start learning HTML RoboHelp 7 days - $24.95! Click here for authorized Adobe Captivate and RoboHelp HTML training Click here for the SorcerStone Blog Click here for RoboHelp and Captivate eBooks

• Icon of Wikipedias missing tab?

  Wikipedias icon isn't load in its tab, so far, it seems as if it was the only site that does this. last night the icon loaded fine on the https://www.wikipedia.org/ page, but nowhere on the site, but this morning it is more support there as well. This is well on other computers and other browsers, however.

  You did to be sure that the security software is not blocking this image?

  The network tab, which shows if you open the image in a tab?

  • https://developer.Mozilla.org/Tools/Web_Console

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Create a new profile as a test to see if your profile is the source of the problem.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting more problems.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Bug: Missing TAB in standalone application

  So far I was at a loss to refine this bug to a small example VI if it is here in general terms, in the hope that someone will have a solution to this.

  I have an application with a large number of subVIs that I develop on a machine Windows XP (LV 2012 latest patch). The main VI has control tab with 10 tabs in it (more a hidden one). I have no trouble to release it as a source distribution on a Win7 64-bit (LV 2012 64 bit running) computer. Things work very well.

  When I try to release it as a standalone application, the tab control disappears on the same exact machine where it works very well as a distributed source! Obviously it now installs as a 32-bit application, since I developed it on a Windows XP machine.

  If I release the same code on another WinXP machine (in fact a MBP under WinXP laptop to in Parallels Desktop), I have no trouble either...

  Where my tabs is on the Win7 machine?

  I tried and check if a simple application of the VI with a tab on the PF would show the same problem, but that seems not to be the case... Nasty bug!

  
  

• Properties of missing tab PDF document

  When I click on properties of a document created with the Adobe Acrobat 8.1 I have no PDF tab over just one general.

  This is what I'm talking about:

  

  As you can see behind the Properties window it is a PDF file but I get no PDF Properties tab.  Can someone tell me how to solve this problem?

  

  Hello

  The question you have posted is related to PDF documents and will be well suited in the Adobe forums. Click on the link below.

  http://forums.Adobe.com/community/Acrobat/acrobat_windows

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• 'Start' missing tab

  I try to help my elderly father of 80 year to resolve this problem on his computer over the phone.  He knows not what he was doing, but the tab start has disappeared from the lower left of the screen.  The only way he can turn off the computer's power button.  Any help would be appreciated.

  Thank you
  Larry

  It could be that the taskbar was minimized - what happens if he presses the windows key? If the start menu is displayed then try hovering over the bottom on the screen until the resize cursor appears, and drag it to the top. (the cursor turns into an arrow to the top and bottom).

  Let me know if this does not work!

• Extract the missing tab to retrieve the css

  My files psd got uploaded to the cloud when I do the following

  -> Click assets

  -> select the file

  -> view on the web

  I can see my files and when I click on it it just view details, activity tab, I am unable to see excerpt tab in order to extract the css of my PSD.

  Thank you

  They took the feature on June 28

  Update on the extract for creative assets Cloud Service online and media | Creative blog Cloud by Adobe

• Missing lenses fixed profile

  In my Photoshop Lightroom CC I can't choose a profile for my lens Canon EF 500mm f / 4L IS USM II when I'm in the develop module. Does anyone know how can I get the missing profile? Not even the old objective profile of 500mm f/4 is available.

  Concerning

  Steen Torner

  Hi steentorner,

  Canon EF 500 mm f / 4L IS USM II objective profile is not by following the objective profile supported:

  Lens profile Support list Camera Raw Lightroom

  You can create your own lens profile by following the below article:

  Create your own profiles of lenses "Julieanne Kost's Blog

  Concerning

  Sarika