trigger the mso with external (BNC) tirgger

Similar Questions

• Satellite A300 - how to use the recovery with external DVD drive disc?

  Hello

  I bought a toshiba Satellite A300 - 15 d

  FTM the tsscorp drive that is installed in the camera no longer works (does not detect any type of media what so ever). ) need to recover the laptop, so I used a USB DVD drive to boot from the restore disc, but after that the charges of recovery console it says waiting for media in the f: drive, which is the tsscorp drive although I used an external drive to load the disc.

  What files should I edit to make it to load from the drive externally and if this isn't the solution, what do I do?

  Thanks in advance

  Hey Buddy,

  Unfortunately I think that it of not possible to use the recovery with external CD/DVD drive disc. Therefore, place the internal for use the recovery disc.
  You can get a new drive to an authorized service provider.

  But if the original OS from Toshiba is installed, you can use the function of disk recovery HARD reinstall Windows as well. Go to the advanced boot menu (F8) and select Repair my computer :)

• dc Acrobat subscription - android app opens the pdf with external application?

  Hello

  The adobe app for android (Lenovo ideapad10) dc opens pdf documents with an external application since a few days - why is this? Why adobe would need an external application for that?

  What happened to the pro-fonctions? I can't edit the pdf documents more. But I need it for the University.

  What can I do? Help, please!

  Thank you

  Falk

  I have a theory based on the screenshots:

  1. The files do not have the .pdf extensions on their behalf. Can you try renaming one of them to ensure that they end in .pdf?
  2. Some file names have a '. ' in them. If the addition of a .pdf extension does not work, can you please try to remove the '. '?

  I don't have my camera android with me today so I can not test this theory. Thank you for your answer!

  Pat

• Message when the project with external link display

  Dear Sir.
  
  I am very fimiliar with Robohelp 6 options. As I've updated from version 6 or 7, things were different. I have a huge project webhelp which consists of many subprojects, in most of them, there are hyperlinks to each other.
  the problem is that whenever I open a project that references an external subject, a message appears saying: (the hyperlink... used in... is outside the flow of the project and do not appear in the project manager)

  This is a standard message and if you like the links are good, there is an option to disable the warning.

  I suspect that you turned off in RH6 and installation for RH7 just brought.

• Windows does not start after changing the partition with external software

  Hello

  I messed up and followed some bad advice.  Water under the bridge, but I want to recover my bootcamp partition if possible.  I've seen several messages with the right process, but decided to post hear instead of assumptions.  I am running OS X El Capitan on an early 2011 MacBook Pro.  My 256 GB SSD is a bit pressed and tried to be too stingy with the Boot Camp partition, so my current troubles after resizing.  I have 10 Windows on the bootcamp partition.

  I'm going to throw a bunch of data from my survey here.

  Capella: ~ list of the ronh$ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 250,1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 190,5 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 58.7 GB disk0s5

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 190,2 disk1

  Logical volume on disk0s2

  B6DC811B-004D-4245-83C9-8FAA0B51FD9E

  Unencrypted

  Capella: ~ list of cs ronh$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 487E3580-D1BE-4A6D-A33C-38C8DD8ABA34

  =========================================================

  Name: Macintosh HD

  Status: online

  Dimensions: 190546800640 B (190.5 GB)

  Free space: 19005440 B (19.0 MB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 190546800640 B (190.5 GB)

  |

  + -> 37BE876E-8E51-47C3-8D62-001EC021DE56 family of Logical Volume

  ----------------------------------------------------------

  Encryption type: no

  |

  +-> Logical Volume B6DC811B-004D-4245-83C9-8FAA0B51FD9E

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 190175473664 B (190.2 GB)

  Reversible: Yes (no required decryption)

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  Capella: ~ ronh$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 250059350016; SectorSize = 512; blocks = 488397168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 488397167

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 372161720 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  372571360 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  373840896 1024

  373841920 114554880 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  335 488396800

  488397135 32 table dry GPT

  488397167 1 dry GPT header

  of gdisk.

  Command (? for help): p

  Disk/dev/rdisk0: 488397168 sectors, GiB 232.9

  Logical sector size: 512 bytes

  Identifier (GUID) of disc: FD5932B4-069B-4CCE-A2EE-99AB5720CA17

  Partition table contains up to 128 entries

  First usable sector is 34, last usable area is 488397134

  The partitions will be aligned with the boundaries of sector 8

  Total free space is 1365 sectors (682,5 KiB)

  Starting number (sector) end (sector), Code name of size

  409639 40 1 200.0 of MiB EF00 EFI system partition

  2 409640 372571359 177.5 giB AF05 Macintosh HD

  3 372571360 373840895 619.9 MiB AB00 Recovery HD

  5 373841920 488396799 54.6 giB 0700 BOOTCAMP

  

  It is worth spending time to recover?  Thank you.

  Ron

  1. can you describe the problem and the steps you took to get here?

  2 can scroll you down to the next MS data (after that highlighted) and press 'p' to the list of files? Press ESC, once only, to return to this list.

• How does the vSphere with external Fax and USB license keys?

  I intend P2Vng a couple of servers, but one of them has an external modem for faxing. Another server has a USB key.

  It will cause problems? Will it be possible to virtualize these?

  Hello

  VSphere 4.1 supports the USB transfer I think still that a USB to the device of the IP works better that thereby you do not pin a virtual computer to a given host. HA, DRS, FT still works.

  Best regards
  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, 2010

  Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security'VMware vSphere (TM) and Virtual Infrastructure Security' [/ URL]

  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]

  Blogs: url = http://www.virtualizationpractice.comvirtualization practice [/ URL] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://itknowledgeexchange.techtarget.com/virtualization-pro/ TechTarget [url] | URL = http://www.networkworld.com/community/haletky Global network [url]

  Podcast: url = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcastvirtualization security Table round Podcast [url] | Twitter: url = http://www.twitter.com/TexiwillTexiwll [/ URL]

• Run the flash with external html buttons function

  How can I run fuctitions in flash, using normal html buttons?

  See the following announcement not too far from your own...

  http://forums.Adobe.com/thread/707720?TSTART=0

• 'Resources in use' error during the acquisition of the analog data on AI0 with external clock on PFI0 and beginning of slope trigger analog on AI1

  Hello

  I use the card PCI-6111.

  I am trying to acquire analog data on channels dev1/ai0 ai1/dev1 using pulses of external clock connected to the PFI0 channel. I also want to trigger the acquisition, when the channel dev1/ai1 signal reaches certain level. I send a triangle wave channel dev1/ai1, and I need the data only for the front.

  I have configured the task in the following ways:

  

  However, I get the error-89137 after function DAQmx Start Task:

  Specified route can not be satisfied, because it requires resources that are currently in use by another route.

  Source device: Dev1
  Terminal of source: PFI0InputLockOut
  Target unit: Dev1
  Destination terminal: AnalogComparisonEvent

  Resources in use by
  Task name: _unnamedTask
  Source device: Dev1
  Terminal of source: PFI0
  Target unit: Dev1
  Destination terminal: AI/SampleClock

  Task name: _unnamedTask

  If I change the internal clock external clock - switch works. If I pull the trigger, the external clock works, too. But these two tasks do not work together.

  Help? Advice? Thank you!

• initialization of the fgen on external trigger

  Hello

  For NI_Virtual bench with the BNC switch, we can trigger the function generator to start the square wave? I mean, I want to relax, so I have the beginning of the square wave

  You cannot trigger the function generator to start in response to an external signal.

  However, you can export a signal only pulses when the FGEN starts the external trigger BNC. You can do this with the entry point to 'Dig deeper the Signal to export'.

  Kind regards

  William Earle

  OR R & D

• Sync to external trigger in conjunction with a nearest pulse frequency device fixed...

  I am writing an application running a scan frame. One axis of the scanner runs at a fixed frequency. I use a scanner high speed 5105 to get the data. The slow axis of the scanner is controlled by a servo with an analog input. I have will probably use an M-series card for analog control, but can also go with a 6713 (output only) or another Board. Fixed frequency Analyzer provides a clock line, I want to use to drive the 5105. In addition, the analog card must be synchronized in this. The entire system should be able to accept a trigger external devices, as it starts scanning at the edge of clock on next line.

  I'm not quite sure about what would be the best way to do it. External triggering from other devices will be an indeterminate pulse width, so I can not just use it as a portal for the line clock. I am reluctant to do it in software (IE via the detection of changes on a digital line) because I want to be reliable started the next clock pulse. I have taken into account things like a counter/timer with a relaxing break, but which could lead to drift between the narcotics control and frequency scanner fixed. It seems just more complex that I think it should be, and it feels like I'm missing a simple way to do it.

  Any suggestions?

  Hi cshl,.

  Good to know - the 5105 has a duty cycle of tolerance of 45-55% (mentioned on the page of the form), so that is why you cannot change clock speed from 3 to 12 MHz on-the-fly (though if you make small incremental updates over time, it would be theoretically possible).

  With the additional information in mind, you might want to try the following on the 5105:

  Use the external trigger as a trigger of departure (arm of acquisition).

  Use the line as a signal reference clock (with a position of 0 samples for reference ~ 7500 are after initiation).

  The problem with this is that you will have to re - trigger on each line - 5105 has a 2.4 rearm us time (also mentioned in the page on record).  If this is unacceptable, another way that I can think of is to use a clock to external reference in PLL internal clocks of the bezel to.  If you can provide a stable, a clock accuracy 50 ppm which is synchronized with your scanner within reach, would solve the problem of drift over time without having to re - trigger on each line (only acquire data continuously).  This clock frequency must be between 1 MHz and 20 MHz in steps of 1 MHz.

  We have no Council can take in an external variable clock up to 12 MHz (on-the-fly), but if you wanted to compromise a little bit the 6115 can enjoy up to 10 MHz, and has no obligation to cycle to 45-55% so it's maybe interesting look in.

  As far as AO goes, I assumed that the clock line is declared after the quick scanner has completed his turnaround (ideally you do not update the zone of OCCUPATION during the lead time).  If you have a signal Analyzer that you can use instead probably easier.  If not, our peripheral series M and X series (but not the series AO 67xx) offer reference clock feature so if you go with the idea of reference mentioned above clock it may be easier to simply PLL the clocks together.  These cards in a PXI chassis or are they PCI form factor?

  I don't know what you mean by the sticking point about the need for two triggers.  I think the idea is that we use the external trigger to arm the 5105 and clock line to trigger each record.  However, if you do not need to generate a pulse double based on the clock of your line then you can use counters to do (our counters are redeclenchables with time to rearm in the ns range).

  Best regards

  John

• problem with the transition and external image

  Hello! I have a little trouble with the transition to a new state that contains an external image. I want a titlewindow to resize when the user clicks on a button and view an external image. the size of the external image is unknown until it is loaded, so I put the widths/heights to 100%. However, the transition "resize" does not know the size of the image in time and comes alive in a small rectangle...
  
  I discovered how to solve this problem by deleting the passage and making the invisible titlewindow until the image is loaded (using the event 'complete'). Ideally, I would like to use the functionality of transition, however and am curious to know if anyone has any ideas on this point - perhaps triggering the resizing to start once the image is loaded? I can only find a way to display a transition through mxml - this can be achieved via actionscript?

  When you use States and there is a tag This means that the child will be added to the display list. The object already exists (a new operation has been made about it). It may not be in a fully realized State first because it has not been added to the display list and therefore his complete cycle of creating the Flex framework has not been executed.

  I haven't run the scenario I propose, so it might actually not, but I have another suggestion below.

  You should be able to have in the State that when you are ready to load the image, img.source = url; should not give you an error. The question is, without the image being added to the display list, try even to load image from url and trigger the complete event? If it does not trigger the complete event, then you can change the States there.

  My alternative is to not put the Image in the State, but leave it in your state of base with a width and a height of zero. Having the button set the source property of the image (or call the load() method). When the complete event triggers switch States.

  In your , instead of having an AddChild, you'll SetProperty. Something like this (width, height would be similar):

  Now, the transition must simply use the effect of .

• Problem with the MK6021GAS as external USB disk

  Hello

  I have a laptop that has a built-in drive HARD Toshiba MK6021GAS.
  I found the disk too slow, so I bought a Hitachi travelstar 7200 RPM to replace. That worked without problem.

  But now I want to use the Toshiba HDD USB external drive. But it does not work. On most computers, I get Windows detect the device but then say "an error occurred during the installation of the device" and a few other times, the device is installed as "unknown device".

  The thing is the usb box works perfectly well with all the other readers, I tested (consuming more than my Toshiba) and the HARD drive works fine if I put it inside my laptop again. I tried to Master and selection of cable, same error.
  I tried several computers (so many configs), several catches USB, tried to add external power source... I still get the same error.

  My 2 "5 USB box is"Mobile Disk "... Well well... noname.

  What can I do?

  Ludovic

  Hello

  I also have external HARD disk. I use it with USB 2.0 2.5 "Portable Hard Drive Enclosure external enclosure and it works very well. Before use, I installed driver CD I got with external box.

  How to use it? Have you installed a driver?

• Portege M200 with external monitor - what is the best resolution?

  As a result of a recent post on using an external monitor with the M400, I have a question on the use of one with the M200. I realize that the M200 uses the graphics card Nvidia rather than the graphics card Intel in the M400 - is it better with regard to the use of an external display is concerned? The M200 manual says that it will support up to 1600 x 1536 resolution on an external display. I want to use my M200 in a docking station with an external monitor to the extended desktop.

  What would be the best resolution to go with externally? Should I go for 1400 x 1050 screen LCD M200 match? Or could I go for a 1600 x 1200, that should the graphics card (!) be able to cope? Or, finally, if I went to a widescreen 1680 x 1050, how would the face Nvidia card? The screen is not as clear as with the 1600 x 1050 screen?

  What are the chances of work at all? I see in the M400 manual which she is supposed to support 2048 x 1536 on an external monitor, but this seems to be a problem, judging from the other post.

  Any help appreciated - thanks

  Hello

  Well, the resolution of the screen depends primarily on the graphics card.
  If you want to use a display resolution that the graphics card must support. In addition, the graphics card driver is important. If the graphics card will support the resolution of the screen, BUT the resolution is not listed in the graphics driver, so you will not be able to choose this value.

  To my knowledge, if you use the docking station you will get Supportepar as the notebook display resolutions.
  The resolution of the external display also depends on the external display. If the material of the monitor will not support the resolution so you will not be able to get all the images on the external monitor.

  I think the best way is to test that the resolution is the best. Some people prefer the high resolution of small icons and other blind ;) like low resolutions (1024 x 768) because of the large icons

• Mix records with the same name of the internal and external space (clip +)

  Hello

  I have a question regarding the reading of 'File': if having a folder on the inside and external space microsd, both are named "graphics". Is it possible to shuffel these 2 files with the same name? There are also a few other folders I want to be included, so I just couldn't use the "play all" option. I don't want to use replay by id3tag because mines are always screwed up and would be a lot of work to mark all the appropriate files in the.

  Thanks for help

  m.

  I've not played with playlists much.

  If ID3 tags are all screwed up, I would use the MP3tag utility to change the label of the kind in "Charts" on internal and external memory, then you access the kind-> just Charts and play at all.  It is probably not an option if your labels are blank and you don't want to ruin you, but it's really quick & easy to do with MP3tag.

  I think that even Windows Explorer (XP/Vista) can change the field type in the batch (select all 'charts' music files, click right properties, summary (Advanced) tab change the field of its kind in "Charts", OK).  I keep the ID3tags 'good' on my PC, but edit on my player according to the needs.

  Just another idea which is really easy if you're not afraid of screwing the ID3 tags.

• Can you use Pocket wizards to trigger the HVLF60M Sony flash when it is out of the unit with the A7R?

  Can you use Pocket wizards to trigger the HVLF60M Sony flash when it is out of the unit with the A7R?  How about studio flashes (Alien Bees)? I just sold my Canon gear and moved to Sony, but I need advice on how to trigger wireless flashes.  Thanks for any help you can provide.

  Larry

  LarryMarshall, Any Trigger of manual Radio should work.  Assistants of pocket or RadioPoppers.

  But there are a few problems with the 60 m.

  (1) it doesn't have a PC or a 1/8 port to connect directly to a Rec Radio of any brand.

  (2) you WILL NEED to buy or use a hot shoe with a PORT adapter... 1/8 according to the sync cable or PC you may already own.

  (3) you WILL NEED to 'Check' to 'ensure' that trigger the 60 m SHAFT is aligned with the center of contact your hotshoe adapter hot with a PORT... because some adapters won't online upward with the 60 m Flash... who fooled you into believing that it does not work.  When, in fact, it's just the PIN which is not aligning with ALL the hot shoe adapters.

  It will work... you just have to be careful... and know of the gatcha.

  The 60 m PUT claw is not fully compatible with all... hot shoe adapters and there that to do with how PUT 60 m flash foot aligns the trigger ROD.

  I triggered the 60 m in flash with RadioPoppers... in the manual... so, I know it works.

  It is, manual release of the waste of the 60 m flash TTL/HSS abilitys.    What is needed is for SONY to develop and deliver a Radio trigger Solution.  Which would be TTL/HSS and you allow to 'Control' the Flash too... from the camera.

  It is the power of a Flash of modern Radio System.

  Manual triggers are old school.

  p.s. the A7r/A7 can easily trigger flashes of Studio with Pocket Wizzards or RadioPoppers... or probably triggers of manual.    Just be careful if the brand you choose is reliable.

  Pocket wizzards and RadioPoppers were the choice of PRO for years.  Because they are reliable.