Try to change the text on a memorial with image.jpeg

Similar Questions

• try to change the text in a saved file, but it will not allow isolate me the text, place the cursor in the text box or simply go back to remove.

  try to change the text in a saved file, but it will not allow isolate me the text, place the cursor in the text box or simply go back to remove.

  Hello

  in what format save you your file? If it's a jpg file, then the text is compressed and unfortunately PS is telling things as they are. Even if you could change the text before you save, after having been saved in jpg format, the text is merged and is no longer editable.

  A good solution is to save the files as PSD files, photoshop files. In this case, all layers are saved uncompressed and so your text will appear in its own layer in photoshop. All you need to do in this case to change it is the result of a three-step procedure

  (1) select the right layer

  (2) take the text tool in the tools bar

  (3) mark and change your text

  So the crucial question is: in what format you save your file?

• change the text of legend group object image size figure

  I need to change the text frame size legend for figure based on the width of the figure in grouped objects

  How to do it please advice.

  Your information and code are not accurate! > Some parentheses are missing, expand the textframe 240 or the width of the image?

  However: Everything made to the works contained in the user interface, it expands the scope of the legend in my test to the right. I decided to write an own function for editing.

  main();
  
  function main() {
  
  var curDoc = app.activeDocument;
  var allGroups =  curDoc.groups;
  
  for (var i = 0; i < allGroups.length; i++) {
    var curGroup = allGroups[i];
    var pItems = curGroup.pageItems;
    if (pItems.length != 2) { continue; }
    for (var j = 0; j < pItems.length; j++) {
      var curItem = pItems[j].getElements()[0];
      var constrName = curItem.constructor.name;
      if (constrName == "Rectangle") {
        var rect = curItem;
      }
      else if (constrName == "TextFrame") {
        var tf = curItem;
      }
    }
    var rectGB = rect.geometricBounds;
    var tfGB = tf.geometricBounds;
    tfGB[1] = rectGB[1];
    tfGB[3] = rectGB[3];
    tfGB[2] = tfGB[2] + 20;
    tf.geometricBounds = tfGB;
    fitFrame(tf);
  }
  
  function fitFrame(aFrame) {
    var lastBaseLine = aFrame.lines[-1].baseline;
    var b = aFrame.geometricBounds;
    aFrame.geometricBounds = [b[0], b[1], lastBaseLine, b[3]];
  }
  }
  

  Note: The script will check if there are two elements on the page of the group. It does not, check if these two elements are textframe and rectangle, it assumes that it is correct.

  Kai

• How can I stop the InDesignCC crashing when you try to change the text

  I'm in an office of 5 users and all 5 of us have the same problem with InDesign CC.  Whenever we get to anything having to do with fonts, InDesign crashes.

  (1) create a new document, select the text = Crash tool

  (2) open an another InDesign doc try to assign fonts for missing fonts = crash

  (3) select text objects in an InDesign doc = Crash

  I can modify the object, the paths and images. It occurs when they are Associates/text fonts.

  We use FontAgent Pro 5,028 for font management, but I tried with and without the FontAgent plugins installed.

  This is the accident report.

  Any ideas?

  Please try to run solutions proposed in the following help document.

  http://helpx.Adobe.com/InDesign/KB/InDesign-CC-crashing-launch.html

• try to change the text in a clip

  I'm trying to replace text in a dynamic text field in a clip, and it seems as if it is treatment as static text. Is there a way to get around this?

  theBtn1.addEventListener (MouseEvent.CLICK, adjustText1);
  theBtn2.addEventListener (MouseEvent.CLICK, adjustText2);
  function adjustText1(e:MouseEvent):void
  {
  textField1.text = "Foo"; It works
  }
  function adjustText2(e:MouseEvent):void
  {
  theMC.getChildByName("textField2").text = "bar"; This is not
  }

  It generates this error:

  1119: access of the property possibly text not defined through a reference with static type flash.display:DisplayObject.

  You don't need to use the function "getChildByName.

  Try:

  theMC.textField2.text = 'bar ';

• Cannot change the text in the existing mathscript box

  I'm under Labview 8.2... I know it's super old, but I met some compatibility issues and found it much easier to continue in version 8.2.

  In my while loop I a mathscript box that controls which cases need to be chosen for each loop.  This configuration has worked perfectly in the past, but now when I try to change the text in the box of mathscript (blue box) I can not type anything in the box.  I click the mathscript box and selects just as if I want to move around.

  Anyone know what could be the cause of the problem?

  Thank you!

  You don't want the arrow tool. You want the tool to operate. One that looks like a helping hand.

  Have you checked that you have enabled editing that made a license for MathScript? Check your License Manager.

• In Windows Vista, when I type text in an e-mail message and then try to highlight, the text disappears.

  I HAVE WINDOWS VISTA. WHEN I TYPE THE TEXT ON THE E-MAILS AND TRY AGAIN AND HIGHLIGHT THE TEXT DISAPPEARS FROM IT. I'VE BEEN ADVISED THAT PERHAPS THE COLOR IS WHITE (I THINK THAT OUR GIRL CAN ACCIDENTALLY CHANGED SOMETHING SINCE IT IS A NEW PROBLEM)
  I DON'T KNOW HOW TO CHANGE THE COLOR. PLEASE CAN YOU HELP. Thank you.

  original title: TEXT DISAPPEARS WHEN I TRY TO highlight THE TEXT

  You can open Notepad and type something.  Press the Insert key, and then try to go back and change what you type and you will see the difference between insert and Overtype.

  I can't help with Firefox, but in IE, you can change the colours via Tools | Internet Options | The colors.  I think Firefox has a similar option, but you need to ask in a forum of Firefox to see the option.  As it happens in the browser, then it is clearly a browser problem and not a problem in Windows mail.

  Steve

• When I have something to stick in wordpad and then change the text, I'll then on preview before printing and most of the time the whole document is not there.

  Original title: need help with wordpad problem

  When I have something to stick in wordpad and then change the text, I'll then on preview before printing and most of the time the whole document is not there. I double space between lines and all that is more than one page disappears. I tried all the different formats (no envelope, window envelope, etc.). How can I fix?

  Hello

  ·         What happens if you use another application to preview before printing?

  ·         You are able to print the document correctly, or you receive no error message when printing?

  You try to use Microsoft Word or Notepad to check if you face the same problem.

  First of all, I would like to check to see if print preview is working on a new empty document with only a word in it.

  If Yes, then the problem is the document.

  You may need to clear any formatting, that depends on where you copied from.

  Your rule of printer drivers print preview

• Try to change the desktop background / Wallpaper

  I have a Toshiba laptop with Windows Vista Home Premium with service pack 2.  I'm changing my screen/for other background thing than the "all black" that is currently displayed.

  I go to the control panel / personalize appearance and sounds / background screen and double click on the image I want as my desktop wallpaper.  It does not change.  I try pictures everywhere (windows desktop wallpaper / photos / sample images / etc) and get the same result.  It does not change.

  I tried the "related children '... Background screen problems, wallpapers appearing is not in customize display of no help.  I am logged in as administrator.

  Thanks in advance.

  Hi CrazyPizzaJoe,

  Run a scan for malware by installing the tool following "Malwarebytes" from the link: http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html

  Make sure that you update the Malwarebytes tool before you run the analysis and then run a full scan and remove if infected files found on the computer.

  After that, open a Notepad and copy the following text and save it as desktop.reg on your desktop

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoActiveDesktopChanges" = hex: 00, 00, 00, 00
  "NoActiveDesktop" = DWORD: 00000000
  "NoSaveSettings" = DWORD: 00000000
  "ClassicShell" = DWORD: 00000000
  "NoThemesTab" = DWORD: 00000000

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "NoDispAppearancePage" = DWORD: 00000000
  "NoColorChoice" = DWORD: 00000000
  "NoSizeChoice" = DWORD: 00000000
  "NoDispBackgroundPage" = DWORD: 00000000
  "NoDispScrSavPage" = DWORD: 00000000
  "NoDispCPL" = DWORD: 00000000
  "NoVisualStyleChoice" = DWORD: 00000000
  "NoDispSettingsPage" = DWORD: 00000000
  "NoDispScrSavPage" = DWORD: 00000000
  "NoVisualStyleChoice" = DWORD: 00000000
  "NoSizeChoice" = DWORD: 00000000
  'UnadviseClient ' = -.

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\ActiveDesktop]
  "NoChangingWallPaper" = DWORD: 00000000

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\ThemeManager]
  'ThemeActive' = '1 '.
  "DllName" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.
  74,00,25,00 5 c 00, 72, 00, 65, 00, 73, 00, 6f, 00, 75, 00, 72, 00, 63, 00, 65, 00, 73, 00, 5 c,
  00,54,00,68,00,65,00, 6 D, 00, 65, 00, 73, 00, 5 C, 00, 6 C, 6F 75, 00, 00, 00, 61, 00, 5 C, 00,------.
  6 c, 00, 75, 00, 6F, 61, 00, 00, 2nd, 00, 6 d, 00, 73, 00, 73, 00, 74, 00, 79, 00, 6 c 00 65, 00, 73,------.
  00,00,00

  After you save the file on the desktop as doubleclick desktop.reg top and click Yes when prompted and click Ok to confirm, and then restart the computer.

  Then try to change the desktop wallpaper and check.

  Please answer if this helps.

  Kind regards
  David

• Windows 7 to put on the desktop, it is too big for the screen, facing problems to change the text.

  Original title: problem with windows 7

  just had windows 7 put on my desk top of the page. It is great for reference but itwon can't I would like to change the text. If I change the resolution, that it makes the photos so you can really see them.it won't let me up the screen so I can't ask anything,

  Hello

  If you recently installed Windows 7 on the desktop, you can try the following steps and check if it helps.

  Method 1:

  We can refer to the computer or the device manufacturer's Web site and try to install the latest version of the display card drivers and check if it helps.

  Update drivers: recommended links

  Method 2:

  It can also refer to article and try the steps to solve the problem.

  Make the text on the screen larger or smaller

  Hope the helps of information.

• When you change the text, all the text in the bounding box is removed...

  I have a PDF file that was created in a different version of Adobe. The Adobe program, I am currently working with that is Adobe Acrobat Pro DC. It is on a Windows 7 PC. When I change the text in the 'framework', any word, I try to change, all of the text in the box is removed. How can I stop this from happening?

  Nevermind, I figured it. I had select the bounding box and select "bring forward" under the "objects" tool

• How to change the text in a form published in LCD / Acrobat 9?

  I have therefore some minor changes to a form that was created in LCD 9 and Acrobat 9 Pro.  Apparently, this seemingly simple task is now impossible with the newer versions.  When I try to edit in Acrobat XI I get the message "this form cannot be changed in Acrobat" but I have no way to change the text on LCD.

  Users of release forms 9 really blocked?

  Yes, it looks like you used to be able to directly edit the pdf 'work' base layer in a LCD pdf.

  The painful solution was to:

  (1) copy the shape of the LCD for a background version

  (2) select and delete ALL the objects in the LCD screen of the form of the background

  (3) use print-to-pdf to create a non - LCD of the shape of the background version

  (4) clean form pdf print background objects,

  (5) use Acrobat XI to edit the text

  (6) open the original form in LCD and then edit-> work replace to replace the background pdf with the updated release of step 5

  (7) maintain the layer background for the changes to come

  This is quite annoying, because with the old version was the only step:

  (1) open the pdf in Acrobat and edit text

  In any case, thanks for the info. I'm not sure what was the logic behind this downgrade XI, but it was enough of a very negative experience that I'll do everything I can to avoid pdf for Adobe products in the future.

• I'm unable to change the text of a document when I imported a document in PDF format in word 2013

  Cannot change the text in word after import

  Hi gfjbo,

  Please try triple click in the text block that you want to change. By default, ExportPDF performs OCR (optical character recognition), so if the PDF file has been created from a scanned document and the text of the contained image, it would have been converted into editable text by ExportPDF.

  If this does not work, please let us know and we will take it from there.

  Best,
  SAR

• How to change the text box in Acrobat XI, created by earlier versions of Acrobat

  Hi, I'm having a hard time trying to figure out how to change a text box that was created in an older version of Acrobat and used to fill in a form.

  In my case, I added text boxes on text pre-existing using an earlier version of Acrobat.

  When I try to click on the text box, however, it seems to be back on the existing text and not allow me to change the text box I created in the past.

  Try changing the text with the tool 'Add comment text' which is in the notes pane. The text used to complete the form may have been written as annotation, so when you try to change those with editing tools, the original text is being edited.

• Need to change the text in the pdf file created in Illustrator CS6

  I need someone else to be able to change the text in a pdf file I created from Illustrator. They have full acrobat should be able to change it. I tried myself to test before you send it, but it does not work. The original file has been created in Illustrator CS6 and saved in pdf format (text not created contours). I opened the file in acrobat and try it saved as file extended to be able to change the text but not luck. You will be able to highlight the existing text and replace it. I tried to change the text of the tool, but rather only a selection box around each line of text, it puts a selection box around the text. I can highlight the text and delete it, but I am unable to change it. Each individual text line should be editable. Is there something I need to do differently in Illustrator so it can work correctly in Acrobat?

  If she help him file is a calendar and they need be able to change the dates and events that are already there.

  This really isn't an appropriate use of Acrobat. You should all use the same editing tool (i.e. Illustrator).

  Extension of files reduced the amount of editing Acrobat can do, it does not increase it.

  The editing of text in Illustrator tool would be to edit the text Document. There is no guarantee that it will divide nicely in lines, it is trying to help by making the text of paragraph.

  In theory, you can use a form for this (fill in the blank for dates) but really, you should use the same tool. Not necessarily Illustrator, more Excel or specialist software calendar.