Windows Vista wireless connects but I have no internet access in Internet Explorer or Google Chrome.

Similar Questions

• My computer connects to my wireless connection but it say no Internet access

  Original title: my computer connects to my wireless connection but it say no Internet access

  I have windows 7 I don't know that much about computers, so I do not know what information you need to help me, but if anyone can help me get back on the Internet would be great, I have used the computer before and it worked very well my brother and dads computer still works fine in fact my iPod touch but I need my laptop for work someone ' a please help if you need more information I would like to know how I get the info from my computer and I'm going to do.  Thank you

  I rebooted my router also I uninstalled my card wireless on the laptop and reinstalled computer I also deactivated and activated the wireless network connection and now I have a mini port Microsoft virtual wifi, which I disabled it I don't know what else to do

  Hello

  1 did you do changes on the computer before the show?

  2. What is the exact error message you get?

  3. What is brand and model computer?

  Method 1: Turn off the antivirus

  See the following site:

  Disable the anti-virus software

  http://windows.microsoft.com/en-US/windows7/Disable-antivirus-software.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 2:

  Follow the troubleshooting steps in the site mentioned below:

  Windows wireless and wired network connection problems

  http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows.

   

• I have internet explore and google chrome, which delault program do I use for pc to run properlyI have windows 7

  I have windows 7 and I have internet explore and google chrome on pc. What delaults will work properly my pc? Continues to explore Internet cuts like facebook, I don't have anyone to ask and cannot afford to take my pc fixed up! Teach me how

  "I have internet explore and google chrome on pc." What delaults will run my pc correctly? »

  Firefox? No, really, the browsers are largely subjective. Many people swear by Chrome, but
  many people swear to the Chrome. Even with IE and Firefox, but I have used Firefox for
  about nine years.

  Other considerations are your internet connection stability and speed.
  Try to run the speed Test (type this name in your search engine) to check if you have found
  good speeds. This after the browser is de-energized as long as you are connected to the internet server
  can slow down during peak periods.
  For example, my broadband speed will reach 20 + but will drop to less than 5 between
  6-8 PM on occasion. It is always a high speed and wasn't about to give up, just an example of
  how a connection can vary.
  You need to get off near the speeds of dial-up (or should we say slowing down) before having
  dropping out of school due to the lack of speed in most cases.
  The other possibility is the quality of the line of your home Exchange.
  Old copper cable can also cause dropouts

  What I've read, Facebook has frequent problems, probably for similar reasons, but in this
  the case that it would be their own updated servers to the test under heavy traffic load.

  Also make sure you have Adobe Flash and Shockwave and another browser "plug-ins" to date. -

  Adobe - Adobe Flash Player Install

  Adobe - Adobe Shockwave Player

  You can learn more about "plug-ins" in the help tab navigators.

  .

• Have to reboot windows vista Home premium, but I have no recovery disk. What can I do?

  I bought my computer in January Circuit City and as part of the purchase, they installed windows vista and other programs such as Norton Internet Security. Recently, my system has been "acting" and the folks at Symantec tell me I can get a worm who slipped in front of the protections. Because this worm was now hidden from detection and very probably damaged my registry files, they suggested I have reformat my system and reinstall all of the BONE upward. I searched through the discs that I got with my pc and I have everything EXCEPT the OS! Whats is worse because their people installed, I have the product identification code, but I think that there is another code for validation that I did not. Circuit City is out of business now and I don't know what to do. I know that my currently installed copy of vista is genuine, but what I need to know is that if there is a way I can reinstall vista on my pc without having to buy another copy?

  Hi lxlthr,

  Please use the forum for Support of Vista,

  Please check under your laptop or your desktop to locate a sticker with the product key for Windows Vista.  If they exist, you can probably use another copy of Vista to install, without making a purchase, a new product key.  If they are not located on this computer or anywhere you can find, then you need to get a different product key to reinstall the operating system.

  Note: Formatting the hard drive will erase all data, programs and user settings you have on the computer. If there is no information on this computer and you don't want to lose, or is not guaranteed, you will need to make backups before proceeding with the INSTALLATION of FORMAT / CLEAN.

  Hope this helps,

  Kevin
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• installation failed: Lr 6 cd install, message: cannot install windows Vista... but I have windows 7

  Hello

  I want to install Lr 6 with cd-rom, but it is not possible.

  The message adobe is, it is not possible with windows vista, but I have windows 7 Professional

  Thanks for help

  f

  Hey Fabian,.

  • Please try to install Lightroom 6 from the link below.

  Digital photography software | Free download Adobe Photoshop Lightroom CC trial

  • Serialize Lightroom CC trial to activate like Lightroom 6:

  https://helpx.Adobe.com/Lightroom/KB/serialize-Lightroom-CC-trial-to-activate-as-Lightroom - 6.html

  Thank you

  Atul Saini

• Windows vista can connect but get no additional cursor keeps showing full

  Vista Premium, I tried msconfig and services stopped and start upward. This does not solve the problem

  Hi petersugden,

  1. Did you the latest changes on the computer?
  2. Do you get black screen only when you log in to Windows?
  3. You have security software installed on the computer?

  Check if the problem persists in safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  If you cannot start in safe mode or if the problem persists in safe mode, then I suggest that you perform repair system on the computer and check if it helps.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  When you start a Windows Vista-based computer, the system may stop responding (hang) at a black screen

  http://support.Microsoft.com/kb/946532

• Site looks great with Safari, but all wrong in Internet Explorer...

  So, I developed a website on my Mac using Dreamweaver CS5, spry and tested in Safari.  It looks great.

  But, I have tried Internet Explorer 8 on Windows XP and it is allw rong.

  Here is the site:

  http://staging-area-2.com

  In Safari, the sidebar is on the left (where it should be).  BUT in Internet Explorer 8, the sidebar appears on the right, and what should be the right pane is shown below the box!

  Can anyone help?

  Remove 27px height of the. MenuBackground css

  Add clear: both; to the ContentWrapper css as below:

  {#ContentWrapper}

  Clear: both;

  }

  You will also need to add
  just before the closing tag "MenuBackground" as shown below. This will allow the background image appears.

  • Home 
  • Craig D. Clark, MD
  • Health Library
  • Location
  • Hours
  • Specialties
  • Forms & payment

  
  

• I have windows vista wireless portable and a USB connected Lexmark Z645 printer, but the printer does not seem to connect with the laptop when it comes to the first trial run, custom printing print

  Lexmark Z645, connected with USB won´t listen to my laptop windows vista wireless when it comes to the trial run first printing used

  Hello

  read information about the lexmark on this model drivers

  http://support.Lexmark.com/index?locale=en&page=product&ProductCode=LEXMARK_Z645&segment=support&UserLocale=en_AU&FromPage=null#2

  It comes to the installation of vista operating system instance

  Try the forum hardware and drivers

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware?page=1&tab=all

• Try to connect to the wireless computer after freshly installed Windows says I am connected to the router, but I have no internet access

  Original title: connection problem

  Hello! I recently did a clean installation of Windows 7 Professional 64 bit and I use a wireless USB adapter. Windows says I am connected to the router, but I have no internet access, and I have this yellow on trinagle. Work of all my other Windows 7 PCs, but this one. Could someone help me? Thank you!

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue. I see that you are unable to connect to the wireless network after you perform a new installation.

  I suggest you to consult the steps described in the article:

  Method 1:

  You can try the steps in the link and check.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  You can update the driver of windows 7 on the manufacturer's Web site.

  Method 2:

  
  You can remove and re-create the wireless network connection, follow these steps:

  a. Click Start, type ncpa.cpl , and then press on Enter.
  b. right click on your wireless network connection and then click Properties.
  c. click the wireless networks tab.
  d. under preferred networks, click your Wireless
  network and then click on remove. e. click on view Wireless networks.
  f. under management of the network, click refresh the network list.
  g. under Choose a wireless network, click the wireless network to which you want to connect, and then click Connect.
  
  Method 3:
   
  
  If the steps above don't you can uninstall and reinstall the NIC drivers and check with the question.

  a. click on Start menu, in the Search tab type devmgmt.msc and press ENTER.

  b. right click on network adapters and click Uninstall and restart the computer.

  c. after rebooting, install network cards and check with the question.

  
  Method 4:
  
  You can temporarily disable the antivirus and firewall on the computer and see if it helps:
  Enable or disable Windows Firewall
  
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  NOTE: Turn off Windows Firewall might make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
  You can see the following link to disable the Antivirus installed on your computer software.
   
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Please follow these recommended steps and post if you still experience the problem. I'd be happy to help you further.

• I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. I use downgrade XP on vista.

  I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. Usually, you must configure only once and his game, but I have to keep on my new Dell Precision 6400 reconfigure it. I use downgrade XP on vista.

  Hi Susancav,

  Welcome to Microsoft Windows Forums!

  I'll be your message to the category of xp windows for a better answer. You can always find your message by going to my Threads in the section My Forum links at the top right of the page. http://www.Microsoft.com/windowsxp/expertzone/newsgroups.mspx

  Thank you and best regards,

  Bindu S - MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have to disable firewall to connect to the Internet. Also pop-up windows to make a dial-up connection, but we have a 2 connection wires to broadband?

  Program network networking Internet website website URL website network

  I have to disable firewall to connect to the Internet. Also pop-up windows to make a dial-up connection, but we have a 2 connection wires to broadband?

  Help!

  Hi Barry,.

  MSE is not the cause.  I suspect two things.  One, some ports in the firewall must be enabled to access the internet (your ISP should be able to tell) or you use a wrong port which is not activated, while the is correct.

  Second, you set up like a dial instead of a connection to the local network through the router (which must also be configured and secured if there is no wireless capability), and then the LAN must be connected to the internet.  Essentially, your network configuration is incorrect and must be corrected.  As a general rule, all you need to do is contact your ISP technical support and if you walk through the process over the phone.

  That's how I would handle it because even the experts here is perhaps not able to determine the appropriate settings for your ISP gave your versions of Windows and brands of routers and modems (and everything that needs to be connected).  They lose your business if you can't connect, and they have people who simply as for a life - often 24/7 - they are generally useful and really good in this.

  If that doesn't work (and I bet than that), and so that I could take you through it here in general with more information about your hardware, OS, ISP and other, this is the wrong forum for this.  You start here: http://answers.microsoft.com/en-us/windows/forum/networking?page=1&tab=all&tm=1300700638376.  Near the top, select your operating system from the drop-down menu to access the appropriate forum for your system.  Then post here like you did here, but give them all the details (manufacturer, brand and model of computer, network equipment, your exact version of Windows, what browser you are using and your network configuration).

  Good luck

  Kosh

• I have a good wireless connection, but I can't get my printer to print anything

  I have a good wireless connection, but I can't get my printer to print anything, but that's a story.

  Can someone tell me what could be wrong?
   
  Original title: default printer:

  Hello

  1. What do you speak?

  2. do you get an error message?

  3 did you changes to the computer before the show?

  4. What is the brand and model of the printer? What is a wireless printer?

  5. have you tried to install the printer drivers?

   
   
  
  Perform the steps mentioned in the article:
   
   
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
   
  I suggest you provide more information about the issue so that we can better help you.
   
   
  See also:
   
   
  http://Windows.Microsoft.com/is-is/Windows7/install-a-printer

   

   

  http://Windows.Microsoft.com/is-is/Windows7/install-a-printer-on-a-home-network

   

   

   

   
  I hope this helps.

• Receive error message: ": windows cannot configure this wireless connection if you have enabled another program to configure this wireless connection, use that software."

  Internet connection xp

  I am running windows xp sp3 on my laptop. After a restart of the internet connection (wireless failed). try to connect to the wireless network has this error
  ": windows cannot configure this wireless connection if you have enabled another program to configure this wireless connection, use that software."
  It's a toshiba n205.  When I right click on the wireless network printer it says that it is the firewall disabled. so I'm going to allow it and it still does not work. I don't understand because it seems that the firewall was working aok before restarting. I change all of the settings.

  I solved this problem by changing the setting to allow windows to establish the network connection, I guess it is made by toshiba software. If anyone knows WHY this would be the case, why all of a sudden we would lose the connection, would be useful.

• I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  Hello, Pichon,

  If Windows Vista application unexpected activation

  On rare occasions, you may be prompted to activate Windows Vista on a computer that did not previously require Windows Vista activation or has already been activated successfully. For example, this may occur on a computer on which Windows Vista was preinstalled by an OEM installation or Volume licensing and are major hardware changes occurred, such as upgrading the hard disk and memory at the same time.

  If you are prompted to reactivate Windows Vista, you can do this by using the Windows Activation Wizard to:

  1. Click Start, and then click computer.
  2. Click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation area. If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  3. Select the Windows Vista activation method that you want, and then follow the instructions.

  To avoid this problem in the future, obtain the latest service pack for your version of Windows Vista, either through automatic updates or direct download.

  To update to Windows Vista and prevent this activation problem does not happen:

  1. Click Start, click all programs, and then click Windows Update.
  2. Click find updates.
  3. As soon as Windows Vista found the updates, click the install updates button.

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  Activation fails when you try to activate Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2 on the Internet

  http://support.Microsoft.com/kb/921471

• my windows vista starts normally until I have pass the user coice screene. After that, I see the cursor but everything is black. What should I do? Thank you very much!

  my windows vista starts normally until I have pass the user coice screene. After that, I see the cursor but everything is black. What should I do?

  It was probably caused by the removal of any file system as I was scaning the pc for malware and probably deleted some important file. only safe mode works now
  and I need my computer quite urgent for the University.
  Thank you very much!

  Hello

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">