Try to install ESX 4.0 on Dell Optiplex 380 - NETWORK adapter driver issue machine
Try to install ESX at home on a Dell Optiplex 380, with Intel Core 2 Duo E7500 @2.93 GHz processor, 4 GB of RAM. Installation keep saying NETWORK adapter detection failed. do not get the NIC for ESX drivers. NIC details as follows: network: Broadcom 57XX Gigabit Integrated Controller, 5721 1 NetXtreme Gigabit Ethernet PCI-E, BCM95722 PCI-E NIC Driver - Version: A05 - name OEM: Broadcom.
I had a similar problem, I tried to install ESX on a Dell Inspiron, but the on-board NETWORK interface was not picked up.
I looked around and I bought the following NIC after reading the reviews and it has worked very well for me since then.
EXPI9301CTBLK Intel 10 / 100 / 1000 Mbps PCI-Express adapter 1 x RJ45 network
Tags: VMware
Similar Questions
-
How to fix Dell Optiplex 380 at HP, the one I use
Dell Optiplex 380 was in excellent condition until I upgraded to Windows 10 the week before I moved. Four months later when I had internet, didn't know I needed to upgrade my security programs and acquired a brutal situation of malware, downloaded ten tons of scrap and resulted in blocking of the Dell printer off of the internet. I have used the Hewlett-Packard, that is running Windows 7, real did well, learned a lot, but have failed to get internet Dell operable. He won't start mode safe mode with networking, reset setting manufacturers, restore previous state or I would remove programs without internet.
I want to know if it is possible to connect the Dell (10 Windows) at HP (Windows 7) so that I can run scans on the Dell of the HP. Dell opens and is usable in a limited framework. How can I have two computers on a single monitor? a mouse and a keyboard on two computers? Can I run things security, Norton, SpyHunter, RegHunter from one computer to another? I really want to buy discs that I can run these programs on up to five computers and it seems pointless to need to buy records.
I want to exhaust all my possibilities of learning before I break and bring it to a repair guy. I'm on the SSD and have little income, but I get to learn what it might take. Please notify
Download ESET Removal tool
Burn it to a CD or create a USB bootable thumb with her:
http://www.eset.com/us/download/utilities/
ESET are Live is a live Linux distribution which can scan malware and clean infected files. It runs from a CD/DVD or a USB device, regardless of the host operating system, but has a direct access to the system disks and files. This will eliminate the threats which, under normal conditions, can be impossible to remove.
Download and create your ESET are Live drive
You can also try to do a system restore before you start experiencing this problem:
http://pcsupport.about.com/od/fixtheproblem/HT/system-restore-Windows-7.htm
There are some that will hide your files/folders so that you don't normally see them. I strongly suggest to run a scan on your computer with your antivirus/antimalware software. If you need to, you can also use the Microsoft Safety Scanner, it's free:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Also, if your files are hidden, check out the following article on how to display the:
http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files
You can also download Windows 10, then do a custom installation:
How to download official Windows 10 ISO files
then
How to: perform a customized Windows installation
then
-
ESXI how to install the network adapter driver
Hi all:
My ESXI5.5 has been installed, but find that the network card can not be identified, how to install the network adapter driver.
Thank you very much
Hello
Follow the VMware KB for the installation of the NIC driver, hope it helps.
-
Qosmio G30-163. Try to install Win Xp Pro on the new HARD 120 GB drive
Hi all
I am trying to install Win Xp Pro on a new 120 GB HARD drive, but windows setup does not recognize the HARD drive.
I have only to install a (formatted) HARD drive on the laptop as main.
The secondary place for HARD drive is empty.Can you please help me with this?
Thank you in advance.
Hello
Rose is right you need RAID driver.
Download from the Toshiba download page and load it before installation of WXP starts using the diskette drive/USB stick and F6 option.On this forum, you can find many threads with exact explanation how.
-
Laptops Dell Studio 1555 network adapter in Vista problem
I work with Dell Studio 1555 laptop computers that have Windows Vista Home Premium on them. I had to reinstall Vista and drivers. Now that it's all over I can't the laptop to connect to wireless internet. I get the below error message:
This computer does not have an installed and configured wireless network adapter...
what Miss me? some services to market?
any suggestions would be greatly appreciated?
Thank you!
http://support.Dell.com/support/downloads/index.aspx
Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.
The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.
See you soon.
Mick Murphy - Microsoft partner
-
PROBLEMS WITH DELL OPTIPLEX 380
PLEASE SOMEONE CAN ME TELL WHY ALL MY OPTIPLEX 380 DELL COMPUTERS GIVING CLEAR AMBER. I CHANGED THE POWER SUPPLY. THEY ARE ALL NEW COMPUTERS, WE GOT JUNE YEAR LAST. CAN SOMEONE HELP ME SOLVE THIS PROBLEMS. WHAT ARE THE CAUSES THAT?
Thank you...
Andy.
Hi Andstino,
If it is, I would like to ask you some questions about what I want to make sure that we get at the bottom of the problem for you. Some questions will be asked to remove components of the system, so please make sure that you disconnect the power cord to the back of the system before making these.
(1) turn on the system. Can you tell me if the power button flashes orange or orange fixed? Could you also tell me if you notice any diagnostic LED remains lit - these are labelled 1,2,3 and 4 and are nearly taken before headset
(2) Please remove all devices to the back of the system and turn on the system. This affects the power LED or Diagnostics LED button
(3) have you added components to the system of cards for example video, his etc...
(4) Please, open the system and remove the following:
(a) cables for power and data from hard drives and optical drives
(b) PCI/PCI-Express expansion card
(c) the memory of the system
(d) the system fan(5) with the above removed, reconnect the power cord to the back of the system and turn on the system. Please take note of what happens with the power LED button and the diagnostic lights
(6) if there is no change in the LED or Diagnostics LED power button, remove the power cord from the back of the system and remove the following:
(a) Panel of e/s cable
(b) CMOS battery(7) with the i/o panel cable and the CMOS battery removed, please connect the power cord to the back of the system. The system should automatically try to turn it on. You hear the beeps of the system? If so, can you tell us exactly what you mean?
If you need help with the removal of these components, please see the manual here: http://support.euro.dell.com/support/edocs/systems/op380/en/index.htmPlease keep us updated on how you go! -
Hello world
I ran Diagnostics on my desktop optiplex 380 almost testing showed happened, but the problem is not resolved so far. I get the message on the screen when I try to run the computer that "TFGHT is compressed - press Ctrl + Alt + Del to restart." I have made this statement but the computer does not all means for desktop. It goes short window on the desktop. Can someone help me with this question, I'll have on Optiplex 380?
Thank you all
Noa
See if this help.
-
Driver network Dell Optiplex 380
I'm a computer technician rebuild a customers 64-bit Windows 7 Optiplex 380 who suffered with the Cryptolocker Trojan horse if you need a reformat. Built in recovery partition won't work, so I installed a new copy of Windows 7 64-bit, but device manager tells me there is no installed ethernet adapter. I have been as usual in these cases, on the Support / downloads site using the tag number and downloaded what seems to be the good pilot, Broadcom 57XX Gigabit Controller, v.16.4.0, A07 and Broadcom 57XX 64 bit update driver/BINS, R296615, combined package but will be installed. I get a message telling me that it is not supported. It was working perfectly before the reformat...!
Any ideas please.
Thank you
Tony
Loïc
I FOUND it and it works. I googled the hardware ID, sorry, I forgot how to do this and he finds on the site of PCI hardware, so everything is now OK.
Thank you very much
Tony
-
Dell Optiplex GX 270 lost driver sound
Hello
I lost the driver for my card of his legacy. Anyone know where I can download the driver without having to buy software such as registry cleaners, Driver Detective, etc.. I was looking for yesterday evening and it is impossible to find a site that just allows you to download the driver without all the other stuff.
Thank you
I forgot to mention that this is an old dell optiplex GX 270 computer.
Thanks again
-
Dell Optiplex PC 390: the driver for the PCI device is not installed
In "Devices and printers" my desktop unit shows a yellow triangle with an exclamation point.
When I click on "help" I get the message "PCI device driver is not installed. When I try 'apply this correction', nothing happens, it retains only the search.
I've read to go to "Control Panel > Device Manager" and click on the part of the problem, then click on "Details > hardware ID" and I get the following:
PCI\VEN_1FD4 & DEV_1999 & SUBSYS_01011FD4 & REV_00
PCI\VEN_1FD4 & DEV_1999 & SUBSYS_01011FD4
PCI\VEN_1FD4 & DEV_1999 & CC_070800
PCI\VEN_1FD4 & DEV_1999 & CC_0708
I don't know where to take from here. Can anyone help?
Thank you
Kathy
Hi, Kathy:
Here is the link for the driver you need...
For later use, there is a Support Forum of community Dell for Dell desktop PC.
-
Try to install Windows 7 from the SanDisk USB 3.0 Flash drive...
I spent days trying to find a solution to this, but nothing helped. I am trying to install an image pre-configured on a new Dell Latitude E5530 and Dell Precision T3500 (our two standard workstation deployments). At the prompt 'Where would you install windows?', I chose the disk/partition and get a message "Windows Setup could not create a new partition system.
Before I begin to explain - I made this configuration will leave if it is thousands of times with disks USB 2.0 without problem. (It installs custom and preconfigured win 7 for an enterprise environment.) The images we use are fine - they work with other USB 2.0 readers)
Material:
Dell Latitude E5530 / Dell T3500
128 GB Samsung SSD (Dell OEM) / Western Digital 320 single disc and two disks in RAID 1 (RAID Intel)
Installation drive: SanDisk Extreme 32 GB USB 3.0 Flash Drive
Software:
Windows 7 32-Bit Enterprise Edition
-Pre-configured image and answer file, custom (install.wim)
Here's what I've done previously. None of this worked at all:
- Clean the disk target (SSD) with diskpart (own > create > active > format (NTFS) > attribute).
- Clean the installation USB 3.0 drive and install re-copied the file several times.
- Cloned the installation drive USB 3.0 from a well-known work 2.0 USB drive.
- Addition of the latest Intel USB 3.0 Boot.wim in the USB 3.0 drivers installation disk.
- Tried manually navigate and load the drivers of intel USB 3.0 while the selection of drive / configure screen (they seem to load but the error persists)
- Boot order set to the target drive / array at the top of the list
- Off the other boot devices.
- Operation change of SATA (AHCI, SATA, RAID, etc.)
- I tried different ports USB 3.0 and 2.0.
- Tried with laptop in itself and dock.
It seems that the Windows 7 installer will not work on this USB 3.0 flash drive anything (not even on 2.0 ports). Each search than I on this subject shows results that relate to an upgrade install or simply clean the score target and marking as active (what I've done, and what does not). I can't, for the life of me, understand what the limitation or the problem, it is that is causing these installs do not work.
I don't have the option to try different USB 3.0 drives. Any help is greatly appreciated.
HI Maria,
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
It will be useful.
-
Hi team,
I have an Intel Server Motherboard S3210SHLC, now I installed VMware ESX 3.5. In the configuration in the network part, I can only see 1 NIC card. How can I find the 2 nd NIC card, that is how it can be possible. GUi based or CLI based. Whatever it is would do it. Please guide.
Regrads
Sylvia
http://communities.VMware.com/thread/129417
Read this topic. ICH9 is supported by ESX 3.5 dpunishment.
StarWind Software R & D
-
Dell OptiPlex 380 TM HELP!
My OptiPlex has lost its graphics IE no signal to monitor just before that happens, I got the color of the lines ect but it was brief so he's just went I had a Radion HD5450 mounted but even when removed still no signal on the screen the generic graphics, the machine always starts as usual
The question can anyone guess at what is wrong with him
Damaged Ram or motherboard or overheating GPU.
Remove the battery to take the card.
Take out the ram.
Turn on it should beep.
Then put ram back 1 stick at a time.
Turn on.
-
Broadcom netxtreme 57xx gigabit ethernet is not supported to install esx 3.5
Hello
I use my laptop Dell E5420 workstation 6. When I try to install esx 3.5 in my computer, it's show error message as port of networking is not supported. Then I tried to install esxi 3.5 in the same system. His installation, but I have not found all of the network adapters. Physical system I have broadcom netxtreme 57xx gigabit ethernet. I changed little in vmx file, but not all.
Please help me
I hope that you use WS 6.5?
you will miss at least the lineethernet0.virtualDev = "e1000".
Take a look at this vmx - worked in nice on Workstation 6.5
config.version = '8 '.
displayName = "esx35i."
ethernet0. Present = 'TRUE '.
ethernet0.virtualdev = "e1000".
Ethernet1. Present = 'TRUE '.
Ethernet1.virtualdev = "e1000".
floppy0. Present = "FALSE".
guestOS = 'other '.
IDE1:0. AutoDetect = 'TRUE '.
IDE1:0. DeviceType = "cdrom-image".
IDE1:0. FileName = 'VMware-VMvisor-InstallerCD - 3.5.0 - 82664.i386.iso.
IDE1:0. Present = 'TRUE '.
memsize = "1024".
Monitor.virtual_exec = "hardware".
monitor_control.restrict_backdoor = 'true '.
numvcpus = '1 '.
scsi0. Present = 'TRUE '.
scsi0.virtualDev = "free".
scsi0:0. FileName = "esx35i - system.vmdk".
scsi0:0. Present = 'TRUE '.
Sound.Present = "FALSE".
virtualHW.version = "6". -
I get an error when I try to install World of Warcraft.
From: KPizzle
Hi, whenever I try to install WoW on my laptop Dell Inspiron 1520, I get the following error at about 98% of the way through the installation."The file"C:\Program World of Warcraft.temp\Data.temp\enUS.temp\Documentation.temp"could not be renamed to"C:\Program World of Warcraft.temp\Data.temp\enUS.temp\Documentation".
(ConflictManager::ResolveConflicts/1) »
I am running Windows Vista and I have a 8600GT with 2 GB of ram. I have no idea why this happens, can someone find a solution for me please?
Thank you!
From: Mark
There are a lot of people on this list who are playing WOW under Vista so it must work.
A couple of easy things to try:
1 - remove the folder C:\Program World of Warcraft.temp. Its possible that it I messed up during the installation of the system and the file is locked, preventing new attempts to working installation.
2 - right click on the file setup.exe on your cd and select 'Run as administrator', it might be useful if it's a permissions problem
Hope thelps!
Mark
Another response of the community of Windows Vista discussion groups
Maybe you are looking for
-
Can not launch Firefox successfully because of the Mac application profile settings?
The team, currently I am working for Oracle and must use Firefox to access our CRM applications.Whenever I run the firefox.app, I get the following error message?Could not initialize the safety component of the application. The most likely cause is p
-
My home page is the page of Google by default, but when I click on open new tab instead, it loads site some other search engine. How can I change that back to Google? I checked for any add-ons to randomly, but this doesn't seem to be the problem...
-
I can't enter my computer hp mini 1000 Code is: CNU9263NWD I don't remember the password for the life of me. Thanks for any help!
-
Director of Windows: audio does not play
I imported the songs on my computer into movie maker, and they used to work. But now, they do not work. It says playback of audio files, but I can't hear the music. The audio of the video work, but my imported music does not work. Can someone help me
-
HP psc 2110 adjust print options do not open in Windows 7
Hello I have the following printer: HP psc 2110 all-in-one and I work with the Windows 7 operating system. I can print, but the 'Print setting Options' dialog box does not, and I can't change my options, always print with the default settings. I trie