Driver network Dell Optiplex 380

Similar Questions

• Try to install ESX 4.0 on Dell Optiplex 380 - NETWORK adapter driver issue machine

  Try to install ESX at home on a Dell Optiplex 380, with Intel Core 2 Duo E7500 @2.93 GHz processor, 4 GB of RAM. Installation keep saying NETWORK adapter detection failed. do not get the NIC for ESX drivers. NIC details as follows: network: Broadcom 57XX Gigabit Integrated Controller, 5721 1 NetXtreme Gigabit Ethernet PCI-E, BCM95722 PCI-E NIC Driver - Version: A05 - name OEM: Broadcom.

  I had a similar problem, I tried to install ESX on a Dell Inspiron, but the on-board NETWORK interface was not picked up.

  I looked around and I bought the following NIC after reading the reviews and it has worked very well for me since then.

  EXPI9301CTBLK Intel 10 / 100 / 1000 Mbps PCI-Express adapter 1 x RJ45 network

• How to fix Dell Optiplex 380 at HP, the one I use

  Dell Optiplex 380 was in excellent condition until I upgraded to Windows 10 the week before I moved. Four months later when I had internet, didn't know I needed to upgrade my security programs and acquired a brutal situation of malware, downloaded ten tons of scrap and resulted in blocking of the Dell printer off of the internet.  I have used the Hewlett-Packard, that is running Windows 7, real did well, learned a lot, but have failed to get internet Dell operable. He won't start mode safe mode with networking, reset setting manufacturers, restore previous state or I would remove programs without internet.

  I want to know if it is possible to connect the Dell (10 Windows) at HP (Windows 7) so that I can run scans on the Dell of the HP. Dell opens and is usable in a limited framework. How can I have two computers on a single monitor?  a mouse and a keyboard on two computers? Can I run things security, Norton, SpyHunter, RegHunter from one computer to another?  I really want to buy discs that I can run these programs on up to five computers and it seems pointless to need to buy records.

  I want to exhaust all my possibilities of learning before I break and bring it to a repair guy. I'm on the SSD and have little income, but I get to learn what it might take. Please notify

  Download ESET Removal tool

  Burn it to a CD or create a USB bootable thumb with her:

  http://www.eset.com/us/download/utilities/

  ESET are Live is a live Linux distribution which can scan malware and clean infected files. It runs from a CD/DVD or a USB device, regardless of the host operating system, but has a direct access to the system disks and files. This will eliminate the threats which, under normal conditions, can be impossible to remove.

  Download and create your ESET are Live drive

  You can also try to do a system restore before you start experiencing this problem:

  http://pcsupport.about.com/od/fixtheproblem/HT/system-restore-Windows-7.htm

  There are some that will hide your files/folders so that you don't normally see them. I strongly suggest to run a scan on your computer with your antivirus/antimalware software. If you need to, you can also use the Microsoft Safety Scanner, it's free:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Also, if your files are hidden, check out the following article on how to display the:

  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

  You can also download Windows 10, then do a custom installation:

  How to download official Windows 10 ISO files

  then

  How to: perform a customized Windows installation

  then

  Recover personal files from the Windows.old folder, such as pictures of Documents and Windows Live Mail emails in Windows 10

• install SATA drive for dell optiplex 170L

  Cannot install a new SATA hard drive in Dell Optiplex 170 L.  Windows XP Pro SP3 cd cannot find the hard drive. Need help please.

  Hello

  This problem is related to the installation of the equipment, I would suggest you get in contact with the system manufacturer for assistance that you need the BIOS (Basic Input Output System) Setup to install the new Windows XP SATA drive. Will also need you a floppy drive to install the new SATA drive.

• Audio driver for Dell optiplex gx 620

  I need Audio driver for Dell optiplex gx 620 for windows 7 64 x

  Go to http://www.dell.com, click Support at the top of the page, select support for individuals, then drivers and downloads and finally put the number of serial number of your computer.  Downloads to be there.

• PROBLEMS WITH DELL OPTIPLEX 380

  PLEASE SOMEONE CAN ME TELL WHY ALL MY OPTIPLEX 380 DELL COMPUTERS GIVING CLEAR AMBER.  I CHANGED THE POWER SUPPLY.  THEY ARE ALL NEW COMPUTERS, WE GOT JUNE YEAR LAST. CAN SOMEONE HELP ME SOLVE THIS PROBLEMS. WHAT ARE THE CAUSES THAT?

  Thank you...

  Andy.

  Hi Andstino,

  If it is, I would like to ask you some questions about what I want to make sure that we get at the bottom of the problem for you. Some questions will be asked to remove components of the system, so please make sure that you disconnect the power cord to the back of the system before making these.

  (1) turn on the system. Can you tell me if the power button flashes orange or orange fixed? Could you also tell me if you notice any diagnostic LED remains lit - these are labelled 1,2,3 and 4 and are nearly taken before headset

  (2) Please remove all devices to the back of the system and turn on the system. This affects the power LED or Diagnostics LED button

  (3) have you added components to the system of cards for example video, his etc...

  (4) Please, open the system and remove the following:

  (a) cables for power and data from hard drives and optical drives
  (b) PCI/PCI-Express expansion card
  (c) the memory of the system
  (d) the system fan

  (5) with the above removed, reconnect the power cord to the back of the system and turn on the system. Please take note of what happens with the power LED button and the diagnostic lights

  (6) if there is no change in the LED or Diagnostics LED power button, remove the power cord from the back of the system and remove the following:

  (a) Panel of e/s cable
  (b) CMOS battery

  (7) with the i/o panel cable and the CMOS battery removed, please connect the power cord to the back of the system. The system should automatically try to turn it on. You hear the beeps of the system? If so, can you tell us exactly what you mean?

  If you need help with the removal of these components, please see the manual here: http://support.euro.dell.com/support/edocs/systems/op380/en/index.htm
  Please keep us updated on how you go!

• Replacement 250 GB C: drive in Dell Optiplex GX 620 with WD 750 GB SATA drive by cloning. BIOS sees the drive, Windows XP does not work.

  I have 5 Dell Optiplex GX 620 desktop computers.  All are about 5 years old.  Had a hard drive failure so I replace the disks C: by secondary SATA disk cloning, disk 1 in the bios.  BIOS sees drive when Windows XP on two systems and not on the other three.  Have no idea why.  All rooms have all the updates of Windows and Dell. A bought WD Caviar Green drives.  WD has replaced three with Caviar Black readers and still does not work.

  Level 2 support WD had response which was to creat Acronis True Image WD Edition BACK boot CD for the windows version of the software, (that I downloaded on www.wdc.com), boot to a CD and had the disc I cloned then.  I wish only the support level 1 guy was aware of this utility.

• Problem Driver network Dell Latitude E5570 with MDT

  We received a lot of laptops Dell Latitude E5570. I want to install a picture on them, using MDT. I downloaded the file CAB for Windows 7, A02 08/03/16. Added to the output of the drivers on MDT as usual, then updated the deployment share.

  When you try to start the installation, I get an error in the wizard. Connect to the deployment share could not be established. The following network device has not been installed, PCIVEN_8086 & DEV_156F & SUBSYS_06DF1028 & REV_21

  I tried download the drivers for the network card on the Intel site and their import. This time, I can access the task sequence list. There's nothing wrong with the first part of the installation. When it comes to complete the installation, I get the same error of Assistant on the network device.

  Any suggestions would be welcome

  I finally got mine work. Drivers is must always use a combination of the taxi driver from Dell and Intel driver. If the version 3 of the TAXI driver who has been published will solve the problem?

  I try to import the driver directly from intel first as well as the cab file and see if it works. This is the link I used: downloadcenter.intel.com/.../Intel-Ethernet-Adapters-Connections-CD

  In the end, I think that my question was due to the SSD and the fact that I tried to start Win 7 x 86.

  After reading a couple of different forums, it seems new SSD require UEFi start to run, which is not supported in Windows 7 x 86. I tried an image with Win 7 x 64 and it worked the first time.

• Hard drive support Dell Optiplex 790 (installation SSD 2.5 ")

  Hello

  I intend to install a new 2.5 "SSD in my Dell Optiplex 790 (mini lathe). Unfortunately, the original hard drive carrier (3.5 "?) was lost.

  As the number of hard disk media (Dell) is quite overwhelming me, I would be very happy to help to find the bracket.

  Laborec

  DN8MY = set of support from Caddy drive 3,5 '' hard
  R494D = support for 2.5 hard drive Caddy Assembly "

• DELL OPTIPLEX 380 ISSUE

  Hello world

  I ran Diagnostics on my desktop optiplex 380 almost testing showed happened, but the problem is not resolved so far. I get the message on the screen when I try to run the computer that "TFGHT is compressed - press Ctrl + Alt + Del to restart." I have made this statement but the computer does not all means for desktop. It goes short window on the desktop. Can someone help me with this question, I'll have on Optiplex 380?

  Thank you all

  Noa

  See if this help.

• driver for dell optiplex gx620 for Windows 7

  I ran a test of compatibility and told me that my 128 MB ATI Radeo X 600 SE driver on my Optiplex GX 620 with XP is not compatible with Windows 7.  Could someone tell me where I could get/download a compatible driver?  Thank you.

  Go here and work through the steps to search for a driver.

• Dell OptiPlex 380 TM HELP!

  My OptiPlex has lost its graphics IE no signal to monitor just before that happens, I got the color of the lines ect but it was brief so he's just went I had a Radion HD5450 mounted but even when removed still no signal on the screen the generic graphics, the machine always starts as usual

  The question can anyone guess at what is wrong with him

  Damaged Ram or motherboard or overheating GPU.

  Remove the battery to take the card.

  Take out the ram.

  Turn on it should beep.

  Then put ram back 1 stick at a time.

  Turn on.

• Maximum memory for Optiplex 380

  Specifications for maximum memory in the Optiplex 380 are quite confusing. Pdf manual indicates the maximum memory is 4 GB - 4 GB module in a slot or two 2 GB modules in two locations. But I read in other places that the maximum is 8 GB - two 4 GB modules in both slots.

  On another thread here, someone asked max on the Minitour Optiplex 380 memory and told me that the max memory is 8 mg. But see here that the max is given as 4 GB:
  http://www.pcrush.com/product/desktop-computers/632935/Dell-OptiPlex-380-desktop-computer-Intel-Core-2-Duo-E7500-dual-core-2.93-GHz-Mini-Tower

  I also is not the case of the minitour and don't know if that makes a difference. I believe that what I have is called the small form factor. I'd really, really like to upgrade memory, but don't want to spend money on a memory module, I can not use.

  Edit: Here are the other features of my computer:
  3.20 gigahertz Intel Pentium Dual-Core
  cache of 64 kilobytes main memory
  secondary memory 2048 k-cached
  64-bit ready
  Multi-core (2 total)
  Board: Dell Inc. 01TKCC A01
  The bus clock: 800 MHz
  BIOS: Dell Inc. A06 01/09/2011
  Usable 3996 megabytes of memory installed
  Slot 'DIMM_1' has 4096 MB (serial number 652F0829)
  'DIMM_2' location is empty

  Just checked. You can add another 4 GB module to your system.

  You can order one here.

• Dell Optiplex 745 with Broadcom NetXtreme 57xx Gigabit Controller with Windows 7 x 64 host cannot fill network

  All, I am new to the forum but have been reading up on top of a problem that had led me into a wall.

  I'm trying to create a development environment that uses VMWare Workstation 7.0.1 (and I tried with 7.0.0 before, leading me to)

  update in the hope of a quick solution) as a development of imaging and the test bench.  The system is a Dell Optiplex 745, upgraded to 8 GB of

  RAM.  Unfortunately, it seems that the biggest problem is the network card.

  I tried several different operating systems, and all DHCP requests are found in the AUTOMATIC private IP addressing.  This is even after I implemented a custom adapter (VMNet2) that fills explicitly to this network card problem.  I disabled VMNet0 and all because this dish was not working.  I have read some relevant

  messages, but nothing seems to help.  This included the http://communities.vmware.com/message/675649 and more

  positions listed on the registry settings.  I don't know what to do at this point.

  So, for those who do not know the Broadcom driver issues, they are apparently many.  It is important to disable the unloading, but

  I'm not able to find the settings in the post linked above.  It's quite similar to the OP for this thread.  I'm not

  know if it's a difference of conductor between the 32-bit and 64-bit implementations.  So, I updated from the version of the driver

  12.2.2.1 (b57nd60a.sys) of 10.100.0.0 (I think, can not driver rollback now to check because I need to work on VMS for urgent

  projects as soon as POSSIBLE).  So, as I said, I was unable to find the parameters of this post

  ()http://communities.vmware.com/thread/191085) mentioned below:

  • Large Send Offload (IPv4)

  • Large Send Offload v2 (IPv4)

  • Large Send Offload v2 (IPv6)

  What I found were these parameters:

  • Flow control (Auto, I tried to disable)

  • Priority and VLAN (priority & VLAN enabled; I tried priority and VLAN disabled)

  • Speed and Duplex (Knew better than to mess around here, has made the problems in the past, retired to Auto)

  • VLAN ID (always 0)

  • Wake Up Capabilities (Magic Packey; no one tried)

  • Unloading ARP (Enable; I tried to disable)

  • NS unloading (Enable; I tried to disable)

  I tried enabling / disabling all, specially those mentioning the unloading, all day without success.  This did not help.

  Later, I tried to add DontAddDefaultGateway, EnabledRSS and DisableTaskOffload keys to my CurrentControlSet on the

  host.  For some reason any DisableTaskOffload shows in the regedit, GUI, not the export of text.  Don't know what this means, and I'm too

  tired of care at this point.

  Host registry settings:

  Windows Registry Editor Version 5.00

  "ICSDomain"="mshome.net."

  "SyncDomainWithMembership" = DWORD: 00000001

  "NV Hostname"="HOME".

  "DataBasePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f,

  00,74,00,25,00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00,------.

  64,00,72,00,69,00,76,00,65,00,72,00,73,00 5 C 00, 65, 00, 74, 00, 63, 00, 00, 00

  "NameServer"=""

  "ForwardBroadcasts" = DWORD: 00000000

  "Domain"="domain.mei.contoso.com."

  'Hostname '=' HOME '.

  "SearchList"=""

  "UseDomainNameDevolution" = DWORD: 00000001

  "DeadGWDetectDefault" = DWORD: 00000001

  "DontAddDefaultGatewayDefault" = DWORD: 00000000

  "EnableWsd" = DWORD: 00000001

  "QualifyingDestinationThreshold" = dword:00000003

  "NV Domain"="domain.mei.contoso.com"

  "EnableRSS" = DWORD: 00000000

  "DhcpNameServer"="141.161.200.201 141.161.100.201".

  "DhcpDomain"="contoso.com".

  So, I'm not where that leaves me.  I am attaching a file vmx for a Windows XP (currently only started in WinPE) invited configured with bridged and IP information for the host and the guest.  If anyone can help me, I would be incredibly grateful.

  Guest VMX file:

  . Encoding = "windows-1252".

  config.version = '8 '.

  virtualHW.version = "7".

  maxvcpus = "4".

  scsi0. Present = 'TRUE '.

  memsize = '512 '.

  ide0:0. Present = 'TRUE '.

  ide0:0. FileName = 'Pharos PS.vmdk Test '.

  IDE1:0. Present = 'TRUE '.

  IDE1:0. FileName = "C:\Users\%username%\Documents\ISOs\peboot.iso".

  IDE1:0. DeviceType = "cdrom-image".

  floppy0.filetype = 'file '.

  floppy0. FileName = "autoinst.flp".

  floppy0.clientDevice = "FALSE".

  ethernet0. Present = 'TRUE '.

  ethernet0.wakeOnPcktRcv = "FALSE".

  ethernet0. AddressType = 'generated '.

  USB. Present = 'TRUE '.

  EHCI. Present = 'TRUE '.

  Sound.Present = 'TRUE '.

  sound.startConnected = "FALSE".

  sound.fileName = "-1".

  Sound.AutoDetect = "TRUE".

  MKS. Enable3D = 'TRUE '.

  pciBridge0.present = 'TRUE '.

  pciBridge4.present = 'TRUE '.

  pciBridge4.virtualDev = "pcieRootPort"

  pciBridge4.functions = '8 '.

  pciBridge5.present = 'TRUE '.

  pciBridge5.virtualDev = "pcieRootPort"

  pciBridge5.functions = '8 '.

  pciBridge6.present = 'TRUE '.

  pciBridge6.virtualDev = "pcieRootPort"

  pciBridge6.functions = '8 '.

  pciBridge7.present = 'TRUE '.

  pciBridge7.virtualDev = "pcieRootPort"

  pciBridge7.functions = '8 '.

  vmci0. Present = 'TRUE '.

  roamingVM.exitBehavior = 'go '.

  displayName = "Test Pharos PS"

  guestOS = "winxppro.

  NVRAM = "Test Pharos PS.nvram."

  virtualHW.productCompatibility = "hosted".

  easyInstall.keepFloppy = 'TRUE '.

  extendedConfigFile = 'Test Pharos PS.vmxf'

  ethernet0.generatedAddress = "00: 0C: 29:64:09:63.

  tools.syncTime = "FALSE".

  UUID. Location = "56 4 d c0 0 b b2 3 b 33 07-24 4 c 65 64 09 63 a4 b1.

  UUID. BIOS = "56 4 d c0 0 b b2 3 b 33 07-24 4 c 65 64 09 63 a4 b1.

  cleanShutdown = 'TRUE '.

  Replay.Supported = 'TRUE '.

  Replay.FileName = «»

  ide0:0. Redo = «»

  pciBridge0.pciSlotNumber = "17".

  pciBridge4.pciSlotNumber = "21".

  pciBridge5.pciSlotNumber = "22".

  pciBridge6.pciSlotNumber = "23".

  pciBridge7.pciSlotNumber = "24".

  scsi0.pciSlotNumber = "16".

  usb.pciSlotNumber = "32".

  ethernet0.pciSlotNumber = "33".

  sound.pciSlotNumber = "34".

  ehci.pciSlotNumber = "35".

  vmci0.pciSlotNumber = '36 '.

  vmotion.checkpointFBSize = "134217728.

  USB:0. Present = 'TRUE '.

  USB:1.present = 'TRUE '.

  ethernet0.generatedAddressOffset = '0 '.

  vmci0.ID = "1701054819".

  tools.remindInstall = 'TRUE '.

  USB:1.DeviceType = "hub".

  USB:0. DeviceType = "mouse".

  ethernet0.VNET = "VMnet2.

  ethernet0. ConnectionType = "custom".

  debugStub.winOffsets.version = "7".

  debugStub.winOffsets.value = "0 x 0, 88 x 84, 0 18 0 x 190 x, 0 x 174, 16, 416, 0x22c, 0 x 228, 0x1f0, 0 x 224, 0x20, 0x18, 0x18, 0x20, 0 x 24, 0x11c, 0 x 8, 0 0, 0, 4 x 0, 14 x 100000, 0xc, 0xc, 0x1b0, 0x18, 0x13c, 0x1f4.

  Host adapters:

  Windows IP configuration

  Name of the host...: TOWMI

  Suffix main Dns...: domain.mei.contoso.com

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  ... DNS suffix search list: domain.mei.contoso.com

  Contoso.com

  Mei.contoso.com

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : contoso.com

  ... Description: Broadcom NetXtreme 57xx Gigabit Controller

  Physical address.... : 00-19-B9-38-5A-03

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::25cc:6bfc:91 has 9: d64d % 11 (Preferred)

  IPv4 address...: 10.205.3.136 (Preferred)

  ... Subnet mask: 255.255.254.0.

  Lease obtained...: Monday, 1 March 2010 16:00:06

  End of the lease...: Tuesday, March 2, 2010 16:00:05

  ... Default gateway. : 10.205.2.1.

  DHCP server...: 141.161.200.213

  DHCPv6 IOOKING...: 234887609

  DHCPv6 DUID customer...: 00-01-00-01-13-19-D6-D2-00-19-B9-38-5A-03

  DNS servers...: 141.161.200.201

  141.161.100.201

  NetBIOS over TCP/IP...: enabled

  Ethernet VMware Network adapter adapt VMnet1:

  The connection-specific DNS suffix. :

  ... Description: VMware Virtual Ethernet adapt for VMnet1

  Physical address.... : 00-50-56-C0-00-01

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::ace9:b312:d32d:fb39% 16 (Preferred)

  IPv4 address...: 192.168.58.1 (Preferred)

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. :

  DHCPv6 IOOKING...: 352342102

  DHCPv6 DUID customer...: 00-01-00-01-13-19-D6-D2-00-19-B9-38-5A-03

  DNS servers: fec0:0:0:ffff:1 1%

  FEC0:0:0:FFFF:2 1%

  FEC0:0:0:FFFF:3 1%

  NetBIOS over TCP/IP...: enabled

  Ethernet VMware Network adapter adapt VMnet8:

  The connection-specific DNS suffix. :

  ... Description: VMware Virtual Ethernet adapt for VMnet8

  Physical address.... : 00-50-56-C0-00-08

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::1c44:4e88:3178:4ccf % 17 (Preferred)

  IPv4 address: 192.168.168.1 (Preferred)

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. :

  DHCPv6 IOOKING...: 369119318

  DHCPv6 DUID customer...: 00-01-00-01-13-19-D6-D2-00-19-B9-38-5A-03

  DNS servers: fec0:0:0:ffff:1 1%

  FEC0:0:0:FFFF:2 1%

  FEC0:0:0:FFFF:3 1%

  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {4EF89CD9-7A7D-4B80-83C5-A56D5FA6D748}:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft ISATAP adapter

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 9:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {E03C7ECA-35DF-43C6-BCC8-08D2BB8E4233}:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Adapter Microsoft ISATAP #2

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Tunnel adapter ISATAP.contoso.com:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. : contoso.com

  ... Description: Adapter Microsoft ISATAP #3

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Adapters of comments:

  Windows IP configuration

  The host... name: minint-et0ko7r

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :

  ... Description: VMware accelerated AMD PCNet Adapter

  Physical address.... : 00-0C-29-64-09-63

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::8842:488e:b75:ec51 %2 (Preferred)

  Autoconfiguration IPv4 address. . : 169.254.236.81 (Preferred)

  ... Subnet mask: 255.255.0.0.

  ... Default gateway. :

  DHCPv6 IOOKING...: 33557545

  DNS servers: fec0:0:0:ffff:1 1%

  FEC0:0:0:FFFF:2 1%

  FEC0:0:0:FFFF:3 1%

  NetBIOS over TCP/IP...: enabled

  See also my VNE screen capture and sample log file attached.  Thank you very much in advance for any help.

  Sorry, had to rub a small part of the newspaper for my own protection.

  Post edited by: alharaka

  I'm sorry, I completely forgot to reply to this topic yesterday (get distracted by a matter of work).    I'll be back today and noticed that you have marked this as answer.  The root cause of the problem was therefore one MAC address per port restriction put in place by your network management team?

• Not able to configure the network on ESXi (Dell Optiplex 755), how to get a shell prompt to configure the network card or check?

  Any knows is Dell Optiplex 755 is compitable with ESXi server?

  When I want to install ESX 3.5 update 3 on the Dell Optiplex 755, it detects drive hsrd (WD), I don't know what to do?

  ESXi is detecting disc hard but not able to configure network & with ESX 3.5 update 3 does not detect the hard drive.

  Comment (I have 2 HDD on the system, 250 GB WD & WD 1 TB).

  Help please.

  Kind regards

  Mustafa Rashid

  SATA, who worked at the 2 update driver update changed 3.  So, you may be able to work around the problem of disk with a modified file, you can probably find at vm-help, but you will still need a NIC for networking.

  -KjB

  VMware vExpert