Cannot access the Web http sites
Since yesterday, I have not been able to access any site that begins with http://, only Web sites that begin with https://. I do not download anything anything beforehand, it was working fine in the morning, but I came home in the afternoon and it did not work. No one else has used the computer. I can't go to these Web sites on firefox, safari or google chrome. I tried to unplug my router, clear the cache, history and cookies from my browser, resetting the computer, update the computer and the browser, use OpenDNS, but nothing works. I installed HTTPS Everywhere, that allows me to go on a site that wouldn't work before, but most of the websites that I use usually will not work.
I'm lost for what to do, so any help would be appreciated.
/ System Preferences / network / advanced / proxies / then deselect "proxy web http.
Tags: Notebooks
Similar Questions
-
Help, please! Cannot access the web after connected to the VPN
Hello
I'm a newbie on Cisco products. I configured a Cisco ASA 5505 with VPN firewall. However, I can't access the web after I connected to the remote IPSec VPN. I also cannot connect to the bands using the intellectual property. But I can connect to the internal servers in the office with no problems.
Here is my setup, can someone help please? Thank you very much
ASA Version 8.2 (5)
!
host name asa
xxxxxxxxx.com domain name
enable the encrypted password xxxxxxxxxxx
xxxxxxxxxxx encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
passive FTP mode
area of zone clock - 8 schedule
clock summer-time recurring PDT 1 Sun Apr 02:00 last Sun Oct 02:00
DNS lookup field inside
DNS server-group DefaultDNS
Server name 107.204.233.222
name-server 192.168.1.3
xxxxxxxxx.com domain name
inside_nat0_outbound list of allowed ip extended access all 192.168.1.96 255.255.255.240
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
IP local pool sc-192.168.1.100 - 192.168.1.110 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 192.168.1.0 255.255.255.0
NAT (inside) 1 0.0.0.0 0.0.0.0
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 192.168.1.0 255.255.255.0 inside
SSH timeout 5
Console timeout 0
interface ID client DHCP-client to the outside
dhcpd outside auto_config
!
dhcpd address 192.168.1.5 - 192.168.1.36 inside
dhcpd dns 107.204.233.222 inside the 192.168.1.3 interface
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal strategy group xxxxxxxx-sc
attributes of xxxxxxxx-sc group policy
value of 107.204.233.222 DNS server 192.168.1.3
Protocol-tunnel-VPN IPSec
XXXXXXXXXX.com value by default-field
xxxxx xxxxxxxxxxx encrypted password username
Strategy Group-VPN-xxxxxxxx-sc
remote access to tunnel-group xxxxxxxx-sc type
attributes global-tunnel-group xxxxxxxx-sc
address sc-pool pool
Group Policy - by default-xxxxxxxx-sc
tunnel-group xxxxxxxx-sc ipsec-attributes
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
call-home service
anonymous reporting remote call
call-home
contact-email-addr [email protected] / * /
Profile of CiscoTAC-1
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:5c1c99b09fb26fcc36a8bf7206af8e02
: end
Hello
Try adding the following commands
permit same-security-traffic intra-interface
NAT (outside) 1 192.168.1.96 255.255.255.240
Is there are always problems with VPN then I would maybe change VPN pool to anything other than something that comes into conflict with the LAN.
In this case, these configurations should do the trick
In order from top to bottom, they would do the following things
- First remove the pool VPN and VPN configurations
- Then remove the VPN pool
- Remake of the VPN Pool with different network
- Reattach the VPN pool for VPN configurations
- Configure NAT0 to the new cluster of VPN
- Remove the old line of the ACL of the configuration of NAT0
attributes global-tunnel-group xxxxxxxx-sc
no address-sc-swimming pool
no ip local pool sc 192.168.1.100 - 192.168.1.110 mask 255.255.255.0
IP local pool sc-192.168.2.10 - 192.168.2.254 mask 255.255.255.0
attributes global-tunnel-group xxxxxxxx-sc
address sc-pool pool
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
no access list inside_nat0_outbound extended permits all ip 192.168.1.96 255.255.255.240
Of course you also have the NAT configuration for VPN pools new Internet traffic
NAT (outside) 1 192.168.2.0 255.255.255.0
Please rate if the information has been useful if this resolved the issue as mark responded.
-Jouni
-
cannot access the web page of WAP but can telnet
Can someone tell me why the following configuration won't let me access the web page of the WAP?
version 12.2
no service button
horodateurs service debug datetime localtime
Log service timestamps datetime localtime
encryption password service
!
hostname EwingWAP
!
logging buffered information
enable secret 5 $1$ z9vV$ M.rY40womPNf7YPOQqC8T.
!
username privilege 15 secret 5 careone $1$ nFXA$ ezjkiBAHeboaKYMzB4hpq.
clock timezone IS - 5
clock to summer time EDT recurring 2 Sun Mar 2:00 1 Sun Nov 02:00
IP subnet zero
!
!
Bridge IRB
!
!
interface Dot11Radio0
no ip address
no ip route cache
!
SSID tsunami
open authentication
Comments-mode
!
base speed - 1.0 2.0 basic basic-5, 5 6.0 9.0 basic-11, 0 12.0 18.0 24.0 36.0 48.0 54.0
threshold RTS 2312
root of station-role
Bridge-Group 1
Bridge-group subscriber-loop-control 1
Bridge-Group 1 block-unknown-source
No source of bridge-Group 1-learning
unicast bridge-Group 1-floods
Bridge-Group 1 covering-disabled people
!
interface FastEthernet0
no ip address
no ip route cache
automatic duplex
automatic speed
Bridge-Group 1
No source of bridge-Group 1-learning
Bridge-Group 1 covering-disabled people
!
interface BVI1
IP 172.18.86.5 255.255.255.0
no ip route cache
!
default IP gateway - 172.18.86.1
IP http server
IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag/ivor
y/1100
radius of the IP source-interface BVI1
1 channel ip bridge
!
!
Line con 0
line vty 0 4
local connection
line vty 5 15
local connection
!
NTP-period clock 2860650
NTP 208.90.144.53 Server
endHi Jason,
Have you tried the default user name and password?
Username - Cisco
Password - Cisco
Please try the commands below and let me know how it works...
en
conf t
AAA new-model
local IP http authentication
end
Try to open the WEB GUI by using the configured user name and password...
Concerning
Surendra -
The user cannot access the web analytics
I can't a user unable to access the web tests. When the user attempts to log in they get an error box will appear with "an error occurred during initialization of the boot options.
I heard that this may be because of outdated java, so the machine has been updated, but the problem persists.
any ideas guys?
Thank you very much
RussellThis problem occurs mainly due to user 'null '.
You can try the following:
1. service and return the available to the user.
2 delete and re-create the user.
3. ensure that the user is able to connect to the workspace. -
Update XP Sp2 to Sp3. cannot access the web page update
The page cannot be displayed The page you are looking for is currently unavailable. The Web site may be experiencing technical difficulties, or you may need to adjust your browser settings. Please, try the following:
- Click the Refresh button, or try again later.
- If you typed the page address in the address bar, make sure that it is spelled correctly.
- To check your connection settings, click the Tools menu and then click Internet Options. On the connections tab, click settings. The settings should match those provided by your local area network (LAN) administrator or Internet (ISP) services provider.
- See if your Internet connection settings are detected. You can configure Microsoft Windows to examine your network and automatically detect network connection settings (if your network administrator has enabled this setting).
- Click on the Tools menu, and then clickInternet Options.
- In the connections tab, click LAN settings.
- Select automatically detect settings, and then clickOK.
- Some sites require 128-bit connection security. Click on the menuhelp and click About Internet Explorer to determine what you have installed the security force.
- If you are trying to reach a secure site, make sure that your security settings can support. Click on theTools menu, and then click Internet Options. On the Advanced tab, scroll to the Security section and check settings for SSL 2.0, SSL 3.0, TLS 1.0, PCT 1.0.
- Click the back button to try another link.
Cannot find server or DNS error
Internet ExplorerI can access other web pages OK.
Burty,
See... http://support.microsoft.com/kb/265847 this article has been written about products for which microsoft no longer offers support. Accordingly, this article is offered "as what ' and longerbe not updated
-
Cannot access the Windows Update site and install updates
Original title: 2 problems 1 when he goes to win the update, I get, can not display the page. 2 if I'm going in a different direction and I get search updates, scanning (encountered a problem can not display the page) comes up and on the opportunity of the page crashes.
I did fix it, I disabled all firewall internet security and and also listed win update to a trusted site.
Hi trski,
I recommend you to check for possible malware program.
1 restart the computer using safe mode with networking. If you have a Type of Internet connection wireless, have a wired internet connection. To restart in Mode safe mode with networking:
a. press the restart.
(b) at the moment you press the restart button, keep tapping F8 until that Advanced Boot Options appears.
c. Select Mode safe mode with networking
2. open the Web browser to explore and go to http://safety.live.com.
3 scan the OneCare Safety Scanner full Service.
4. take note of the items that are detected, but cannot be deleted, as appropriate. Get back to me with the names of the infections that cannot be removed, if necessary.
5. after removing the infection (if any), start in Normal Mode by restarting just the normal computer like you do it.Run Windows Update again, and get back to us with your findings.
If this post can help solve your problem, please click "Propose as answer" If you find it useful, mark it as useful by clicking the 'Vote as useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
BlackBerry Smartphones BlackBerry ID - unable to access the Web Login site
I have problems logging into App World on the Web site. When I click on loggin it brings me to the BlackBerry ID url that shows the site cannot be displayed or problem loading page due to the connection has expired.
I tried to go through the site ID BlackBerry (BlackBerry - BlackBerry ID) and App World Store (BlackBerry App World - home page), but I still have this problem. I have tried different browsers (IE 8, Firefox, Chrome, Opera) but no luck.
App World works very well on my BlackBerry but unable to loggin on the Web portal.
I tried to contact RIM via Twitter but had no solutions of their own.
* Update
I contacted the RIM through my wireless support and discovered his works at their end. I contacted my friend and he was able to connect to the site. There must be something with my ISP connection.* Update 2
I contacted my ISP and they said that they can access the login page of the App World. I tried my VPN connection and it works. I still don't understand why I can't access it without VPN
I need to know what prevents it from my computer. Well, I'm done.
-
Cannot access the Web server in the DMZ from the inside using IP global
Hi all
I hope it's a very simple question.
I'm running a PIX 515 firewall v6.3. I set up a Web server in my DMZ and use static NAT for re-branded it overall static IP address. Access from the outside of the demilitarized zone works remarkably well. I can access inside the interface Web site using the internal IP, but I can't access it from inside interface using the global IP are entrusted to him.
Is there a particular reason why this would not be allowed? My feeling was that the request would be forwarded via the external interface (as it is a global IP address) and then be bounced back by my sense of the ISP the request would come to the new external interface (as the static NAT is applied to the external interface).
However if I try and access the global IP from my inside interface, then the browser can not find the server.
can someone explain why this is so? Any information would be appreciated.
see you soon,
Wayne
---------------------------------
6.3 (3) version PIX
interface ethernet0 100full
interface ethernet1 100full
interface ethernet2 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
nameif dmz security50 ethernet2
hostname helmsdeep
domain p2h.com.sg
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol they 389
no correction protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
No fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
acl_out list access permit tcp any host 203.169.113.110 eq www
access-list 90 allow the host tcp 10.1.1.27 all
pager lines 24
debug logging in buffered memory
Outside 1500 MTU
Within 1500 MTU
MTU 1500 dmz
IP address outside pppoe setroute
IP address inside 192.168.1.1 255.255.255.0
dmz 10.1.1.1 IP address 255.255.255.0
no failover
failover timeout 0:00:00
failover poll 15
No IP failover outdoors
No IP failover inside
no failover ip address dmz
location of PDM 202.164.169.42 255.255.255.255 inside
location of PDM 202.164.169.42 255.255.255.255 dmz
location of PDM 10.1.1.26 255.255.255.255 dmz
location of PDM 10.1.1.26 255.255.255.255 outside
location of PDM 172.16.16.20 255.255.255.255 outside
location of PDM 192.168.1.222 255.255.255.255 inside
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
Global (dmz) 1 10.1.1.101 - 10.1.1.125
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
NAT (dmz) 0-list of access 90
NAT (dmz) 1 0.0.0.0 0.0.0.0 0 0
static (dmz, external) 203.169.113.110 10.1.1.27 netmask 255.255.255.255 0 0
Access-group acl_out in interface outside
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
Enable http server
http 192.168.1.222 255.255.255.255 inside
enable floodguard
string fragment 1
Console timeout 0
Terminal width 80
Code v6 pix or less don't let you have traffic "back" or return flow via the same interface on which it was sent. Having also your bounce back off of an external server traffic is never a good idea, because you won't be able to distinguish which and rogue attacks by spoofing someone outside your network.
Since you are using pix 6.3 code, you may be able to outside the NAT. Add this static to your config:
static (dmz, upside down) 203.169.113.110 10.1.1.27 netmask 255.255.255.255 0 0
You may need to run a clear xlate after adding the new static statement. Note that the interfaces: it's demilitarized zone, inside inside, dmz.
I would like to know if it works.
-
Cannot access the Microsoft Update Site
I get the following error message when you try to access the update site:
Microsoft Update could not be installed on your computer
Make sure that you log on as an administrator or as a member of the Administrators group, and then try again.More troubleshooting options
- If your computer is connected to a network and the problem persists, contact your system administrator to see if your Microsoft Update settings are managed by using Group Policy.
- If your computer is not connected to a network, or if your system administrator has not disabled Microsoft Update, check if the Windows Update service is disabled or stopped. For information about how to start a service, search help and Support on your computer.
Note: If you encounter problems with the installation of Microsoft Update, you can continue to get updates for your computer by going to Windows Update in control Panel.
[Error number: 0x800A01AE]I AM logged on as administrator (it's actually the only account on the system other than the guest account: I have renamed the main administrator account and use it as my account {I know this isn't the best practice, but I always did like it and it makes things easier being the administrator, especially since I changed the name for security reasons}). I have a small home network wireless, but have no defined group policy (no server - just-to-peer). The Windows Update Service is launched and running (but I stopped and restarted it just to be safe).
I don't quite know what to do next. I would like to be able to access this site for updates that cancelled or failed during the update process automatic (and who seem not to be re - that appear as options when I check the updates).
Any help you can give would be greatly appreciated...
BTW, I use a Dell Inspiron E1705 with 32-bit Windows Vista Business SP2.
Thank you!
Lorien - a - MCSE/MCSA/network + / A +.Hello
You try to go actually on here Windows Updates site?
http://www.update.Microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us
This site does not work for Vista. You must use the Windows built-in to Vista updates or download them
sites I posted for you last time.Absolutely do not use the default Administrator account. Just make a new Admin account to
use and leave the other to test and difficulty. In fact, make an Admin NOW account to use to test and fix
According to the needs. If your sole administrator corrupts you will have a big headache.-------------------------------------
Run the Windows updates to reset and
Do the two of them:
How to reset the Windows Update components? a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system update for Windows Vista, for Windows Server 2008 analytical tool, for
Windows Server 2008 R2 Release Candidate for Windows 7 Release candidate
http://support.Microsoft.com/kb/947821------------------------------------
If you have issues with your updates, please describe what you see and all the error codes or the KB/QB
problem updates.I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Cannot access the Web Configuration of RE1000 page once I have connected to my wireless network
I can't access the Setup page of my wireless range Extenders RE1000 via IP 192.168.1.1 address once I have connected the Extender to my wireless network. I was connected to the router via my mac and even took my mac out of wireless networks (just to be sure he wasn't trying to get to the IP 192.168.1.1 wireless.
It happened a few times. After it happened the first time I reset the access point and was able to get back to the web administration page. I updated the firmware and exactly the same problem repeated once I plugged in my network home.
This is a security feature? (Perhaps once it's on the wifi network you don't want just anybody access admin functions...?) A bug? Or something else?
Thank you
If you don't set a static on the RE when IP address configure it on the connection of the SSID, it will grab an IP address from the router. You need to look in the router DHCP client table to find the RE of the new IP address. You can also use a reservation DHCP from the router to assign an IP address to the STIMULUS, but static IP is the best.
-
I have Windows Vista, IE 8 and labtop HP Pavilion. I had just recently Cricket Wireless Broadband, with a USB wireless modem. I now have the Charter/Comcast broadband through my cable. The modem is connected to my PC via the Ethernet port. On the connection icon on the toolbar on the right down, it shows that I am connected. The "Local Area Connection Status" in the network and sharing Center seems to be connected, since bytes are sent and received.
However, when I'm on IE8, it acts as if there is no connection. Not being able to view the web page. Also, now when I go to a local WiFi hotspot, I can't connect to a network, just as I always, and it shows that there is a link, however, it won't let me access the internet. It used to work, before everything first, I connected the cable modem.
Any ideas? Thank you!!
JFerguson15,
If the Cricket connection works correctly but your cable connection is not, which suggests the computer is set up correctly and the problem is with the cable connection. All other systems are able to connect through the connection of the Charter? If this isn't the case, please contact Charter and see if they are able to determine the issue on their end or help you reconfigure the modem.
Cody C
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
cannot access the web site driver for fingerprint sensor driver sp52354.exe
Re HP model dv7-4280us, Win 7 Home Premium. Caan can't discover fingerprint sensor. I can't download thedriver-ACCESS web site.
Hello
You can download directly from the following link:
http://ftp.HP.com/pub/SoftPaq/sp52001-52500/sp52354.exe
Kind regards.
-
happening only on a few sites of bill payment.
Hello
1. what internet browser do you use?2. If you are using Internet Explorer which version do you have installed?If you use Internet Explorer see the methods below.Method 1.
I recommend you follow the steps listed in the article below and check.
You cannot connect to or connect to Web sites in Internet Explorer secure
http://support.Microsoft.com/kb/813444
Method 2.
If the problem persists, add sites to the trusted Web site and check. Refer to the article below for the procedure.
Security zones: adding or removing websites
http://Windows.Microsoft.com/en-us/Windows7/security-zones-adding-or-removing-websites
I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Cannot access the Web site 'one' only. I built it, no sense
For some reason I can't access one of my client's Web sites. I can communicate with everything and all other Web sites that I own or manage. I have a new install of Windows 7 Pro SP1 OEM. It makes no sense at all. I can update the site using my software and download it via their server, but may not display the changes. Their server 1 and 1 says it's my PC. I NEVER encountered this in 12 years on any of my PCS 8 different. Any help would be greatly appreciated.
Hello
The question you have posted is better suited for the MSDN forums. Please report the issue in the following link and check:
http://social.msdn.Microsoft.com/forums/en-us/iewebdevelopment/threads
I hope that helps!
-
Cannot access the Web site through admin 'Not found' error message
I just transferred my game - pup.com with www and non www domain name
The two of us, I changed the names of DNS server for ns1.worldsecuresystems.com & ns2.worldsecuresystems.com through my old Web host
My site is also on the paid plan, so what did I miss?
My site is still up and running that I just can't access it when you try to connect, I get this error message
Not found
The requested URL /Admin/Index2.aspx was not found on this server.
Hi Michelle,
I checked your domain, it works, when you update the DNS it normally takes some time to update.
Please try to reset your browser or use a different browser
Thank you
Prabhakar Kumar
Maybe you are looking for
-
I can't download my Audiobook. I tried everything to download the audio book, I bought all week. What is the problem? How can I solve this problem?
-
There is a modern equivalent for application for Win8.1 PasswordManager?
I have question, I've owned several years ThinkPad R61, but a few days back my R61 - bad nv gpu die. So now I bought the new ThinkPad Edge E540 with pre-installed Win 8.1 Everything works ok but I have a problem - on my old thinkpad I use Lenovo's Pa
-
My update of the computer window stopped updating since October 23, 2010 and each time I tried check the update popular I get the error code 80070490. Help, please!
-
Problem with cooling - HP Compaq Presario CQ70-211EM
Hi, I didn't really know where to post, so I decided to post here, sorry if this is the wrong place. So, I have this laptop (HP Compaq Presario CQ70-211EM) for 3 years now, everything works fine, except the system cooling, computer laptop everything
-
Currently I have CS4 11.0.2 with Camera Raw installed 5.7.0.213. I tried to install the raw camera 6.4 version - which is what says their graph, I need for the D5100, but I get an error message: "update could not be applied. This patch is not appli